MÜLLER used machine for sale

Burn-butt welding machine make MÜLLER type OM-HASTU I 15/30Machine -No: 1630, built in 1982Transformer power, lasting: 15 kVATransformer power, intermittent: 30 kVAConnected load: 30 kVAOperating voltage / frequency: 380 V / 50 HzMains fuse: 80 Atr.Welding current control: 6 stagesMax. Compression pressure: 1200 daNCooling water consumption: approx. 2 l / minOperating voltage: 380 V, 50 HzExternal dimensions H x L x W: 880 x 1000 x 460 mmWeight without clamping device approx: 390 kgWith- miter clamping device and electrode jaws- separate hydraulic unit:used, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine To ...

Eccentric press make MÜLLER type ExP 35Machine -No: 927171 built in 1971Technical specifications:Printing capacity: 35 tProjection: 220 mmRam strokes: 110 HpM.Adjustable ram: 53 mmAdjustable stroke: 1 - 70 mmTable surface area: 580 x 495 mmMotor power: 3.0 HPDimensions approx: 1100 x 1300 x 2000 mmWeight approx: 3500 kgWith- Protective screen- foot switch- height adjustable table- Protective screenused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table eccentric press make MÜLLER type ExPT 12Machine -No: 0331188 built in 1988Technical specifications:Max. Punching capacity: 12 tProjection: 160 mmStrokes per minute: 120Slide adjustment: 40 mmAdjustable stroke: 8 - 80 mmTable size approx: 490 x 300 mmDrive power: 1.1 kWDimensions approx .: 2100 x 1200 x 1950 mmWeight approx: 2500 kgWith- pneumatic coupling- AMT material feed deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make MÜLLER type ExP 60 SV/HKMachine -No: 6030790Technical specifications:Max. pressing force: 60 tProjection: 280 mmInstallation height: 360 mmTable surface: 750 x 560 mmDrop Hole: 300200mmTable adjustable: 160 mmRam area: 380 x 200 mmPlunger adjustability: 60 mmRam strokes per minute: 110Plunger adjustable: 10 - 90 mmMotor power: 4.0 kWWeight approx.: 3950 kgwith- Control SIEMENS Simatic OK 27- hydraulic clutch- adjustable table- Two-hand disengagement- straightening unit- Roller feed- Safety device according to UVVused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Single column press make MÜLLER type CD 16.11.55Machine -No: 10480 Year 1983Press force: 16 tTable size: 450 x 350 mmPiston diameter: 90 mmBear size: 320 x 240 mmPiston stroke: 100 mmDiarrhea opening in the table: 100 mmDimensions L x W x H: 700 x 1100 x 2005 mmWith- Cutting impact damping- safe control- Two-hand release- Photocell- infinitely adjustable pressure settingused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 63 t throat: 280 mm stroke: 160 mm table surface area: 560 x 500 mm ram surface: 280 x 280 mm dayligth: 400 mm oil volume: ca. 360 l total power requirement: 22 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 1,45 x 1,75 x 2,67 m - Workroom enclosure with Sick light barrier - Large ram with ejector and pin clamp - foot switch - Motorized depth stop in the cylinder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 320 mm stroke: 160 mm table surface area: 850 x 550 mm dayligth: 500 mm oil volume: ca. 500 l ram surface: 560 x 450 mm total power requirement: 30 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 1,5 x 2,0 x 3,0 m Machine was overhauled in 2008 - Workroom enclosure with Sick light barrier - Large ram with ejector and pin clamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t distance between columns: 600 mm stroke: 160 mm dayligth: 360 mm table-size: 560 x 400 mm ram hole: 40 H 7 DIN 810 mm oil volume: 500 l return speed: 200 mm/sec die cushion hydr. pressure/stroke: 60 capacity of ejector: 25 t total power requirement: 15 kW dimensions of the machine ca.: 1.44 x 0.95 x 2.54 m pressing speed: 27 mm/sec return speed: 200 mm/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 300 mm stroke: 10-100 mm no. of strokes: 80 Hub/min ram - range of adjustment: 60 mm table surface area: 900x600 mm ram surface: 800x230 mm hole in the table: 300x200 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1700x1500x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 350 mm stroke: 20-140 mm stroke of worktool slide: 40-60 Hub/min ram adjustment: 75 mm total power requirement: 15 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 360 mm stroke: 560 mm total power requirement: 33 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: 2000x2400x3650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 45 t throat: 230 mm stroke: 4 - 80 mm strokes per minute: 120 table surface area: 690 x 460 mm ram surface: 360 x 185 mm ram adjustment: 55 mm daylight, max. stroke above - ram adjustment above: 340 mm total power requirement: 3 kW weight of the machine ca.: 2,95 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.