We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Notes: The swivel function of the Rädlinger Tilt 90 by 2 × 90° makes it possible to work in confined spaces. At the same time, the Rädlinger Tilt 90 expands the range of applications and performance of excavators as well as the efficiency of the attachments. Technical information: - with hydraulic locking - Weight: 219 kg - Swivel angle: 180° - Torque: 4320 Nm at 210 bar - Holding torque: 14,200 Nm - Oil requirement: 5.2 ccm/1° - Max. operating pressure: 210 bar - Assembly recommendation: HS 03DW (up to 7 t), HS 08 - Dimensions solo motor (W x H x L): 270 x 230 x 402 mm - Weight solo motor: 90 kg - Swivel angle 2 x 90° - Overload protection by double pressure relief valve - Protection against pressure loss on the excavator side due to double Unlockable non-return valve - Maintenance-free and wear-resistant - Low installation height - Optimized size, match ...
used
floor-plate length: 5000 mmfloor-plate width: 1800 mmfloor-plate height: 290 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Technical information: - Carrier Yanmar VIO 33 - Quick coupler mount hydr. HS 03 Quick coupler
used
table length: 400 mmtable width: 400 mmtable load: 120 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed rotary table in very good condition, little used (less than 100 hours)Table diameter 400 mmBosch AC-MotorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Cab for mini excavator approx. 83cm x 100cm with windscreen wiper and opening front Slight paint chipping
used
Can be taken away from our yard for Free., 0
used
various grippers/pliers in stock (see photos) each with adapter plates
used
Working width 117 cm, rigid, mounting width 190 mm, with VTN 50 bolt mount = Nino de Martis mount = Martin old version mount,
used
Diameter x width: 750 x 1,500 mm max. operating pressure 300 bar Weight: approx. 2,800 kg 76 Chisel
used
with complete hold-down device, especially for garbage disposal, with screw-on reversible knife
used
System DELMAG ; Load capacity 0.5 t ; Tare weight 1.45 t ; Tray capacity 2 m³ ; Reach C= 2029 , D= 3220 mm
new
1 set of welding hooks, available with Hauer A or Hauer B attachment
new
Hydraulic hammer demolition hammer for excavators from 4to to 9to Manufacturer MUSTANG Model HM300 (Unused) Building YEAR 2021 Serial number AH21XXXX Operating hours 0 Accessories: Chisel Weight 275kg Working pressure 60-80 bar Flow hydraulic oil 40 - 100 liters / min
used
Volume bucket 180 cm working width suitable for 30-40 t excavators, with Lehnhoff MS21 mount, mount width: 510 mm, bolt diameter 80 mm,
used
ID3197 Wolf TSP 124 year/Year of construction 2020 1850 kg Bucket separator, excavator class: from 18 t, wheel loader class: from 10 t, cutting width: 1200 mm, volume: 1.5 cbm, screening area: 1.10 m², throughput/hour: 52-77 cbm/hour, working pressure: 280-300 bar, oil requirement: 150-200 l, max. pressure: 320 bar, with Lehnhoff MS21 quick coupler bucket separator, excavator class: from 18 t, wheel loader class: from 10 t, cutting width: 1200 mm, volume: 1.5 cbm, screening area: 1.10 sqm, throughput/hour: 52-77 cbm/h, working pressure: 280-300 bar, oil requirement: 150-200 l, pressure max.: 320 bar, with quick coupler Lehnhoff MS21
used
Working width 40 cm, receiving width 15 cm,
used
ID3129 MRS 5,5 cbm grapple 5.5 cbm MRS hydraulic grab 5.5 cbm MRS Hydraulic Grapple
used
Working width 30 cm, recording width 190 mm, with VTN 50 bolt recording = Nino de Martis recording = Martin old version recording,
used
Hydraulic hammer / hydraulic-Meisel attachment used. For bobcat, mini excavator and small wheel loader with holder on fork carrier. Manufacturer/Type: unknown Holder approx. H-400 mm, W-1114 mm Meisel-A approx. 70 mm Meisel length approx. 400 mm Pressure: 400/850 PSI Total approx. 1160 x 1000 x 800 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
used
55 cm working width, with teeth
used
Attachment for an excavator Stone barrel, concrete cutter, surface milling machine, drum barrel, attachment cutter, cross-cutting head cutter used O&K Orenstein and Koppel SN1487569 940963 211.22.25.42 Cutter diameter s. 670 mm Width: approx. 1300 mm Tool holder approx. 30 mm Ambauschild approx. 700 x 570 mm Hole size approx. 580 x 420 mm Bore approx. 275 mm Total dimensions: 1400 x 1300 x 670 mm Subject to changes and errors in technical data, information and prices as well as intermediate sale
used
42 cm working width
used
Sell Bosch Demolition Hammer GSH 11 VC The machine is in good condition, functional and tested.
used
40 cm working width, pick-up width 27 cm
used
Bosch Demolition Hamer; Mortise hammer GSH 5 CE. 5 Units In Stock
used
Working width 45 cm, recording width 190 mm, with VTN 50 bolt recording = Nino de Martis recording = Martin old version recording,
used
As pictured without cables. Shipping D-country without islands 9.-
used
30 cm working width
used
Rope grab bucket older design but little used good condition. Bucket extension 1 x 4 replaceable fence 1 x 3 replaceable fence little snuffed. Bucket width: approx. 700 mm Shovel opening: approx. 1.8 m Double pulleys at the bottom and top. Total height: approx. 2.8 m
used
15 cm working width, pick-up width 19.5 cm