x rite centurfax used for sale

Control switch, joystick switch TELEMECANIQUE XD2GA8411 061145 4 directions, 2 switching levels 400 V 10 A New ! Dimensions: 95 x 95 x 150 mm

Position switch TELEMECANIQUE XCMD2116L1 Osiswitch ZCY16 ZCMD21 1 NC, 1 NO Nominal current: 6 A nominal voltage: 240 VAC / 250 VDC approx. 1,1,0 m connection cable New ! Dimensions ( packaging ): 200 x 200 x 30 mm

Position switch, crane runway limit switch TELEMECANIQUE XCR E18 ( XCRE18 ) IEC 947-5-1 EN 60 947-5-1 Switching arm length: 200 / 200 mm Switching capacity: 240 V AC, 3 A used, tested ! Dimensions ( without switch arm ): 130 x 130 x 80 mm

Position switches, limit switches, limit switches, with roller lever TELEMECANIQUE XCR-T115 IEC 947-5-1 EN 60 947-5-1 Switching arm length ( with roller ): 220 mm Roll: Ø 28 x 80 mm Switching capacity: 240 V AC, 3 A used, tested ! dimensions ( without switch arm ): 95 x 85 x 76 mm

Position switches, limit switches, limit switches TELEMECANIQUE XCKJ10511H29 092854 IP66 Switching capacity: 240 V AC, 3 A New ! Dimensions ( position switch ): 135 x 40 x 60 mm Dimensions ( packaging ): 130 x 70 x 45 mm

Pressure Switch TELEMECANIQUE XML B160D2S11 ( XMLB160D2S11 ) P: 10 - 160 bar Differential range: 9.3 - 100 bar Dimensions 200 x 75 x 35 mm

Safety switch TELEMECANIQUE XCS A501 071885 switching capacity ( AC ): 240 V 3 A 2 NO, 1 NC IP67 New, with documents ! Dimensions ( safety switch ): 115 x 40 x 45 mm Dimensions ( packaging ): 130 x 70 x 45 mm

Pressure switch TELEMECANIQUE XML A160D2C11 ( XMLA160D2C11 ) P: 10 - 160 bar Dimensions 200 x 120 x 35 mm

Directional valve, solenoid valve, hydraulic valve REXROTH 4WE 6 X139/EG24N9K4 ( 4WE6X139/EG24N9K4 ) R900572840 350 bar 24 V DC used, tested ! Dimensions: 210 x 50 x 90 mm

Command transmitter housing, 2 pieces SCHNEIDER ELECTRIC XAP M1501 Number of encoders: max. 1 Length: 80 mm Width: 80 mm Height: 77 mm Bore: Ø 22 mm Thread: M20 Material: Zinc injection molding New ! Dimensions ( single package ): 90 x 85 x 95 mm

Inductive proximity sensor, position sensor TELEMECANIQUE XSA-H0231 34290 12 / 24 V DC Thread: M12 x 1.0, length: 45 mm approx. 2 m connection cable New, with documents ! Dimensions ( sensor without cable ): Ø 12 x 64 mm Dimensions ( packaging ): 140 x 65 x 35 mm

Pressure switch TELEMECANIQUE XMJ-A003 P: 0.4 - 3.5 bar Connection: 1/4 ( inch ) New, with documents ! Dimensions ( pressure switch ): 112 x 74 x 32 mm Dimensions ( packaging ): 120 x 82 x 40 mm

Safety switch TELEMECANIQUE XY2. CA230 main rope length: approx. 4.6 m release rope length: approx. 0.5 m with handle with converter XAL-T94 and indicator lamp 6 V 1.5 W used, tested ! Dimensions (without rope): 280 x 190 x 110 mm

Pressure switch TELEMECANIQUE XMJ-A0707 P: 9.5 - 70 bar Connection: 1/4 ( inch ) New ! Dimensions ( pressure switch ): 100 x 32 x 74 mm

Auxiliary switch module, auxiliary contact, 4 pieces MOELLER DILM150-XHI31 max. 6 A max. 500 V number of poles: 4 3 normally open contacts, one NC Other quantities on request ! New ! Dimensions ( auxiliary switch module ): 46 x 45 x 40 mm Dimensions ( packaging ): 250 x 50 x 42 mm

Solenoid valve SMC VP542-5YZ1-03A-X517 Operating pressure: 0.2 - 0.7 MPa ( 2.0 - 7.0 bar ) 1x Control solenoid: 24 V DC New ! Dimensions: 140 x 32 x 88 mm

Auxiliary switch module, auxiliary contact, 4 pieces MOELLER DILM150-XHI22 max. 6 A max. 500 V number of poles: 4 2 normally open contacts, 2 NCs Other quantities on request ! New ! Dimensions ( auxiliary switch module ): 46 x 45 x 40 mm Dimensions ( packaging ): 250 x 50 x 42 mm

Pressure Switch TELEMECANIQUE XMG-B002 P: 0.2 - 1.4 bar Switching capacity: 250 V AC, 4 (2.5) A / 380 V AC, 2.5 (1.5) A new ! Dimensions: 105 x 102 x 162 mm

Safety relay, emergency stop switchgear PILZ PNOZ X10.11P 24VDC 6n/o 4n/c 6LED ( PNOZX10.11P24VDC6n/o4n/c6LED ) 777750 24 V DC 5.0 W 230 - 240 V AC 5.0 - 8.0 A 24 V DC 7.0 - 8.0 A used ! Dimensions: 95 x 90 x 120 mm

Directional control valve REXROTH MECMAN TYPE 5-X13-2 04938 335 02 New ! Dimensions: 85 x 80 x 40 mm

Directional control valve REXROTH MECMAN TYPE 6-X13-2 04938 335 02 New ! Dimensions: 85 x 80 x 40 mm

Fine filter, air filter HECHT 103-X02-017 Fine filter suction side for RD10 Connection diameter: 90 mm bolt circle diameter: Ø 117.5 mm 4x bore: Ø 9.5 mm New ! Dimensions: 260 x 260 x 170 mm

Intermediate flange hydraulic pump VIVOLO, CONTARINI X2P5502ECBA VIVOIL Patent shaft diameter: Ø 15 / 18 mm x 20 mm (conical) shaft thread: M12 x 1.5 Flange diameter: 250 mm bolt circle diameter: Ø 215 mm 4 x bore Ø 14 mm 4 x thread M12 x 1.75 used, tested ! Dimensions: 250 x 250 x 250 mm

Pressure switch with accumulator KALTENBACH KKS400 Pressure switch: TELEMECANIQUE XM2 - JM050 P: max. 50 bar Accumulator: INTERGRAL HYDRAULIK Type D0.08-250 P: max. 250 bar, capacity: 0.08 litre spare part for cold circular saw KALTENBACH KKS400 !, among others used, tested ! dimensions 330 x 80 x 70 mm

Hydraulic cylinder PAGUS x604691600 CAS OPOQ030101 MAG 00140/02 CDE 3800024 DL 3800024 built: 1996 Rod: Ø 160 mm Max. stroke < 300 mm Base: Ø 540 mm New ! Dimensions 540 x 540 x 830 mm

Two-hand machine control, safety two-hand control switch TELEMECANIQUE (PREVENTA) XY2-SB65 240 V 3 A IP 65 out of need ! New ! Dimensions: 600 x 200 x 100 mm

pneumatic cylinder, standard cylinder, double-acting SMC CP95SDB40-350-XC4 stroke: 350 mm piston diameter: Ø 40 mm rod diameter: Ø 16 mm rod thread: M12 x 1,25, Length: 22 mm pmax: 1.0 MPa ( 10 bar ) New ! Dimensions: 515 x 53 x 53 mm

Ultrapure water treatment, EDI SNOWPURE / ELECTROPURE / EDWARDS EDI XLBOC-500 YL3201003 used, tested ! Dimensions: 570 x 420 x 220 mm

Pneumatic cylinder, standard cylinder, double-acting SMC CP95SDB40-350-XC4 stroke: 350 mm piston diameter: Ø 40 mm rod diameter: Ø 16 mm rod thread: M12 x 1,25, length: 22 mm pmax: 1.0 MPa ( 10 bar ) used, tested ! Dimensions: 515 x 53 x 53 mm

Maintenance Unit, Maintenance Equipment Combination SMC IDG10M2-F02C-X016 AMH150C-F02BC-T, Submicrofilter with pre-filter IDG10-F02, membrane dryer Operating pressure: max. 0.85 MPa ( 8.5 bar ) New ! Dimensions: 210 x 155 x 67 mm

Encoder, speed sensor SIKO DG 2-XXX-V/16-EN ( DG2-XXX-V/16-EN ) 95 V 48 - 62 Hz 0,14 A shaft Ø 16 mm flange Ø 120 mm New Dimensions: 205 x 120 x 130 mm

Pneumatic cylinders, standard cylinders, double-acting AIRTEC, PNEUMATIKATLAS XL40/250 ISO 15552 stroke: 250 mm piston diameter: ø 40 mm rod diameter: Ø 16 mm rod thread: M12 x 1.25, length: 20 mm pmax: 10 bar New ! Dimensions: 413 x 54 x 54 mm

Pneumatic cylinders, variant cylinders, round cylinders, double-acting SMC CD85N25-500-B-X2018 stroke: 500 mm Piston diameter: Ø 25 mm Rod diameter: Ø 10 mm Rod thread: M10 x 1,25, Length: 20 mm pmax: 1.0 MPa ( 10 bar ) Mounting thread: M22 x 1.5, length: 20 mm Mounting socket: Ø 8 mm, length: 16 mm width across flats nut: 32 mm New ! Dimensions ( without nut ): 646 x 30 x 30 mm

Pneumatic cylinder, double-acting JOUCOMATIC isoclair X640096090 43500308 piston: Ø 16 mm stroke: 100 mm rod diameter: Ø 6 mm rod thread: M6 x 1,0 Mounting thread: M16 x 1.5 pmax.: 10 bar Material: stainless steel New ! Dimensions: 210 x 20 x 20 mm

Directional control valve, 5/2-way valve REXROTH, MECMAN TYPE 5-X13-2 04938 335 02 New, with documents ! Dimensions ( directional control valve ): 78 x 39 x 75 mm Dimensions ( packaging ): 125 x 110 x 45 mm

Directional control valve, solenoid valve, hydraulic valve REXROTH 4WE 10 X5A33/cg24K4 ( 4WE10X5A33/cg24K4 ) R 900570378 New ! Dimensions: 200x 70 x 95 mm

Dosing pump, chemical pump PULSATRON, PULSAFEEDER LEH7SB-PTC3-XXX ( LEH7SBPTC3XXX ) Series: E Dosing capacity: 37,8 l/h 2.4 bar Current consumption: 0.6 A 230 V 1AC 50 / 60 Hz IP65 a defective pump foot used, tested ! Dimensions: 265 x 165 x 215 mm

piston pump, without drive PAGUS X257 124 001 OPAV040201 Rod diameter: Ø 40 mm rod thread ( inner ): M18 x 1,5, Depth: 60 mm female thread ( output ): 1 ( inch ) female thread ( input ): 2 ( inch ) Flange diameter ( input ): Ø 126 mm bolt circle diameter: Ø 105 mm 6x threaded hole: M8 x 1.25, depth: 30 mm used, repaired ! Dimensions: 440 x 190 x 190 mm

piston pump, without drive PAGUS X257 654 001 Rod diameter: Ø 57 mm rod thread ( inside ): M18 x 1, 5, Depth: 60 mm female thread ( outlet ): 1 ( inch ) female thread ( input ): 2 ( inch ) Flange diameter ( inlet ): Ø 125 mm bolt circle diameter: Ø 105 mm 6x threaded hole: M10 x 1.5, depth: 15 mm used, repaired ! Dimensions: 570 x 185 x 190 mm

piston pump, without drive PAGUS X257 124 000 OPAV010101 rod diameter: Ø 40 mm rod thread ( inner ): M18 x 1,5, Depth: 60 mm female thread ( outlet ): 1 ( inch ) Flange diameter ( input ): Ø 126 / 80 mm bolt circle diameter: Ø 105 mm 6x threaded hole: M8 x 1.25, depth: 30 mm used, repaired ! Dimensions: 565 x 190 x 190 mm

Piston pump with heating, without drive PAGUS X257 832 073 Rod diameter: Ø 40 mm Rod thread ( inside ): M18 x 1,5, Depth: 60 mm Female thread ( outlet ): 1 ( inch ) Flange diameter ( input ): Ø 180 / 82 mm bolt circle diameter: Ø 155 mm 6x Bore: Ø 9.5 mm Heater: 0.4 kW, 220 V AC used, repaired ! Dimensions: 635 x 190 x 190 mm

Excess stainless steel pipes 42CrNi18-10 Dimension 20 x 1 x 3000 39 pieces a' 3 meters

material: VA More then 300 machines new and second hand on our seema .de

Shade bracket, 9 pieces B & R - AUTOMATION X20 X20AC0SF7.0010 Length: 66 mm Width: 48 mm Height: 40 mm Material: Galvanized steel New ! Dimensions ( packaging ): 140 x 70 x 55 mm

Vacuum valve, vacuum angle valve SMC XMH-25 Nominal diameter: DN 25 Flange diameter: Ø 40 / 55 mm drive: manually operated Material (valve body): Stainless steel New ! Dimensions: 160 x 100 x 65 mm

Solenoid valve, directional control valve CKD FAB41 FAB41-X0513 0.7 MPa ( 7.0 bar ) G1/4 ( inch ) installation length: 40 mm 24 V DC New ! Dimensions ( valve ): 78 x 70 x 84 mm

Eagle Pro Bulk415 X-ray machine Serial: E313401 2020, Eagle Bulk415 Xray machine maximises contamination removal while cutting product waste and reducing downtime to boost line efficiency for dry bulk product applications like nuts, grains, granola, sugar, cereals, coffee and more, 15" TFT colour touch screen, comes with a brand new separate control panel and comes with a an additional Bakker magnetics magnet, ask for full technical spec, 3Ph

Axes travel X-1020 Y-610 X-560 SK40 spindle 8000 rpm Magazine for 20 tools Control Siemens Sinumerik 810d Communication with the PC via the RS port, we have a new postprocessor for the machine written by GM System The center is operational and is in constant use

Machining capacity -Maximum swing diameter above the guide ways: 2500 mm (98.42 in); -Maximum swing diameter above the saddle: 2100 mm (82.67 in); -Distance between centers: 7600 mm (299.21 in); -Maximum weight between centers: 20 tons. Faceplate -Faceplate diameter: Ø2200 mm (86.61 in); -Turning speed range: 150 rpm ; -Main motor power: 60/75 kW ( 80/100 HP); C axis -C axis: continue 360°; -Milling spindle motor power: 11/15 kW (14/20 HP); Standard Accessories: -FANUC 0i CNC; -Heidenhain linear scales; -Faceplate, 1 piece; -Tool turret with 12 posts for milling tools, 1 piece; -Partial enclosure with chip conveyor; -Centralized hydraulic and lubrication unit; -Electrical devices: 380V, 3 phases, 50 Hz; -Levelling devices for foundation, 1 set.

Emergency stop switch, 2 pcs TELEMECANIQUE XAL K178 2x Switching element: ZEN-L1121 230 V 3 A 50 Hz switching function: 2x 1 NC 1x Mushroom push button New ! dimensions ( single emergency stop switch ): 68 x 68 x 94 mm dimensions ( packaging ): 140 x 70 x 100 mm