We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,376 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Extension / distance slide center to frame: 320 mm Sheet thickness / sheet thickness: 3.2 mm Cutting surface / cutting capacity: 1600 mmx2 Distance table pestle/ distance table slide: 417 mm Stroke adjustment / adjustment of stroke: 16...125 mm Stroke number/ number of strokes: 45 / min Pestle adjustable/adjustment of slide: 80 mm Table size / surface of bed: 800 x 630 mm Bumper size / surface of ram: 500 x 400 mm Slope of the stand / inclination of coulmn: 25 Power of main motor power: 4 kW Weight: 2.5 Specification: C-frame punching press, used
used
Hand spindle press, used Balancier, used Type: PSHZ 25/I Pressing force / rated pressure: 25 t Stroke/ stroke: 250 mm Table size/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Table opening / hole in table: 140 mm Weight: 0.9t
used
Horizontal round table - with bearing tracks Bearing tracks can be easily removed, Geraet fully ready for use without restrictions! Diameter 600mm construction height 140mm Partial setup via angular scale It's immediately available. Further horizontal parts available, please ask price. If you are not able to see what you need, please ask, we have not put the whole stock in place and probably the right one in stock. - Diameter 500mm built-in height 120mm with direct pitch over cam and angle scale - 2 pcs. diameter 400mm, can be used horizontally and vertically, indirect pitch for discs, once as good as new, once with bearing tracks Vertical sub-cameras and universal horizontal / Vertical pivoting sub-cameras 1. Walter with three-jaw lining 2. Lid with three-jaw lining and counter holder Special price
used
Various sub-equipment from a training workshop, to hand over individually, e.g. lid sub-device with upper beam and counter holder, Universal part apparatus with initial division Walter UTA150E with counter holder and rotary chuck 3 partial discs with parts see above, Part apparatus Walter can be swivelled without initial division. Furthermore Luenetten standing and running, on request please Specify the tip height and distance mid prism to mid plan area. Rest according to photo. Other sub-equipment susengar, Direct division Indirect division, various large sum. Please ask Sub-discs for UTA 150 E 22 24 29 36 37 49 57 63 16 30 33 36 39 51 57 63 16 27 30 33 41 47 53 61 Special price
used
used
Force of pressure: 40 t projection: 250 mm table size: 440 x 530 mm Durchfalloch in the table: 170 Ø mm table adjustment: 220 mm plunger surface: 200 x 280 mm slide adjustment: 60 mm stroke adjustment: 8-80 mm stroke rate: 100 / min drive motor: 380 V, 2.5 kW space: 950 x 1450 x 2050 mm weight: 2400 kg
used
unused counter-holder for horizontal fraesening for WMW FQ400CNC The gnholder has a counter bearing for the reception of the long fraesdorne. Special price
used
Tip height: 1250 mm Turning diameter: 2,500 mm over bed Centre distance: 4.000 mm Support motion: 750 mm longitudinal feeds 630 mm cross feeds Face plate: Ã? 1250 mm Spindle speed: 5.6-280 RPM. Spindle bore: 100 mm Workpiece weight: 10.000 kg Equipped with: -Floor plates 4.500 x 2.200 mm -Powered tailstock -Operating instructions Country of origin: Germany Engine power: 45 kW Machine weight: 18,000 kg Machine Lxwxh: 8,000 x 4,000 x 2,100 mm
used
Table diameter: 2000 mm Turning diameter: 1800 mm Turning height: 1250 mm Motor power: 35 HP/kW Positions ATC: 0 Positions APC: 0 MACH-id 4306 MAKE WMW TYPE DKZ 2000 x 1250 B YEAR 1976 SPECIFICATIONS Max. turning diamter Ø 2000 mm Table / chuck size Ø 1800 mm Workpiece height 1250 mm Work piece weight 6000 Kg Horizontal movement support / ram 1150 mm Stroke support left ram 700 mm Stroke support right ram 700 mm Angle adjustment / ram swivable 30 Spindle speeds / ranges 50 Rpm Power 35 Kw DIMENSIONS Length 4100 mm Width 5300 mm Heig ...
used
see picture for data. Table hoehen-adjustable. mass approx.: 1.55 x 0.8 x 2.1 m high
used
Single Column Coordinate Drilling Machine Fabr. WMW Mikromat Type BKoE 400 x 630/1Mash. -No: 1203.14.44for single, small and medium batch production of high quality gauges, fixturesTools and workpieces with tight tolerance requirementsTable size: 630 x 400 mmTable feeds: 63/160/400/1000 mm / min19 spindle speeds: 45 - 2800 rpm.Spindle feed: 0.014 - 0.5 mm / revHeadstock feed: 0.006 - 0.22 mm / revDrilling spindle stroke: 100 mmSpindle diameter: 80 mmTool holder: MK 3Distance between table and spindle: 40 - 560 mmAdjustments along: 400 mmtransverse: 250 mmvertical: 420 mmExternal dimensions approx: 2190 x 2010 x 2330 mm highWeight: 2.3 tWith:- 2-axis digital display- Angle drill head- 1 set of tool holders- 1 microscopeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding ...
used
Band width 250 mm, stuffenlos adjustable speed Btto 600 kg
used
Surface grinding machine make WMW type SFW 200 x 600Fabr -No: 330690Technical specifications:Working area: 200 x 600 mmgr. adjustment in Y-direction: 230 mmgr. adjustment in X-direction: 690 mmgr. Distance between worktable and spindle center: 500 mmUsable table surface: 200 x 600 mmpermitted table load: 110 kpTable speed stepless: 2 - 18 m / minGrinding wheel size: 200 x 20 x 51 mmelectrical connection: 3 kWGrinding spindle drive: 1.1 kWOutside dimensions approx: 1500 x 1700 x 1900 mmWeight approx: 1.01 tWith- Electromagnetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Metal lathe make WMW Karl-Marx-Stadt type DLZ 355 x 1600Fabr. -No: 2410/60, built in 1960Technical specifications:Technical specifications:Turning length: 800 mmCircumferential diameter over bed: 355 mmCenter height: 180 mmSpindle bore: 35 mmTailstock tip taper: Morse 4Quill shift by hand: 140 mmTailstock shift of the upper part from the central position: 10 mmWorkpiece weight between the steadies: 630 kgbetween the tips: 400 kg18 spindle speeds: 18 - 2500 rpm16 feeds length: 0.071 - 1 mm / rev16 cross feeds: 0.036 - 0.5 mm / revmetric thread 16: 0.5 - 7 mmInch thread 28:60 - 4 turnsModule thread 1 0.25 - 3.5Main drive: 5.8 kWExternal dimensions: 2200 x 1060 x 1225 mm highWeight: 1900 kgWith- three-jaw chuck- Steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. ...
used
Hydraulic single column press make WMW ZEULENRODA type PYE 160 S 1Machine -No: 057-007 / 38 built in 1974Max. Press force: 160 tRetraction force: 34 tRam stroke: 500 mmProjection: 360 mmInstallation height: 800 mmSpeed from: 0.2 m / min.Speed at: 0.125 m / min.av. Working speed: 92 mm / sSpeed at: 125 mm / sTable size: 900 x 630 mmBear area: 750 x 450 mmTable height: 800 mmOperating pressure: 160 kp / cm³Connected load: 17 kWDimensions L x W x H: 1250 x 2200 x 3650 mmWeight approx: 7 tWith- stroke limitation- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Technical data Cutting surface at the top. 710 x 710 mm Clamping area 710 x 450 mm Swivel / Tiltable 0 - 90° mm Table height approx. 63 mm T-slot dimension (bottom / top) approx. 40 / 21.5 mm Weight approx. 560 kg Dimensions ( L x W x H ) 710 x 710 x 635 mm
used
C-frame Stand-up Press WMW Power: 3 tone Mounting height: 355 mm Stroke: 280 mm Stumbling speed: 0.1 m/sec. Machine Weight: 400 kg Country of origin Germany
used
used
Bezel, stick, lynette -Max. Passage: Ø 65 mm -Tip height: 83 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 250/280/H65 mm -Weight: 6 kg
used
Collet holder, tool holder, tool holder, milling holder, milling tool -Take: Ø 32 -Tension sleeves: 4/6/10/12/14 mm -Weight: 1 kg
used
Collet collet sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Collet holders: Ø 1x12/2x18/2x20 mm -Weight: 1 kg
used
electromagnetic round table 200 mm WMW
used
Compulsory mixer, agitator, mixer, mixing tool, stirrer -Nominal consumption: 1050 watts -Connection: 230 volts -Speed: 230 rpm -Dimensions: 1000/520/H130 mm -Weight: 10 kg
used
Bezel, steady rest, lynette -steady rest: from lathe WMW DLZ 800 -Max. Passage: Ø 260 mm -Tip height: 495 mm -Technical drawing: in the photos -Dimensions: 670/130 / H785 mm -Weight: 98 kg
used
Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 88 teeth -Weight: 9,5 kg
used
Clamping angle with T-slots Size 1600x1250x1000 mm and 1250x1000x750 mm
used
various wedge shoes, set-up elements, machine feets
used
Bezel, stick, lynette -Max. Passage: Ø 210 mm -Tip height: 390 mm -Technical drawing: in the photos -Dimensions: 600/125/H625 mm -Weight: 53.5 kg
used
Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed -Feed size: Ø 250 mm -Weight: 35.5 kg
used
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg
used
Bezel, stick, lynette -Transfer in current condition as seen -Max. Passage: Ø 260 mm -Tip height: 370 mm -without: quills -Technical drawing: in the photos -Dimensions: 680/135/H830 mm -Weight: 92 kg
used
Bezel, stick, lynette -Max. Passage: Ø 212 mm -Tip height: 319 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 610/120/H650 mm -Weight: 59 kg
used
WMW Heckert 6000 x 1050 mm Cylinder Grinding Machine Table size : 1050X6000 Machine is in very good condition
used
Code 151295 Description Facinglathe with center Make WMW NILES Model DP 1 / S 2 Serial number 261 526 149 Year of make 1986 Max. centerheight over base plate 1250 mm Max. swing over base plate 2480 mm Max. swing in Gap 3100 mm Distance between centers 4000 mm Max. workpiece weight betw. centers 10.000 kgs Spindle bore 100 mm Movement slide ( max. ) 1000 ( + 750 ) mm crossslide 630 mm toolslide 200 mm 18 Speeds 5,6 – 280 rpm Motorpower 45 kW Total power 55 kVA Machine weight total ± 18000 kgs Accessoiries 4 chuck facingplate of Ø 1250 mm Condition Machine is in very good condition
used
- Flat steel shear cuts flat up to 100 x 18 mm - Knife length approx. 250 mm - Profile steel scissors cut angles 90° to 100 x 10 mm 45° to 70 x 8 mm - Bar steel shear cuts round steel 90° to 36 mm Square steel 90° to 30 mm - Notching device sheets up to 8 mm - Hole punch - Pressure capacity approx. 50 t - Projection 350 mm - punched in steel up to 20 mm Ø in 15 mm - Drive 400 V / 3 kW - Space requirement approx. W 1100 x H 1700 x D 2300 mm - Weight approx. 1900 kg
used
max. load: - kg : - weight: - kg 10 off used machine shoes. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 5000 mm turning diameter over slide rest: 4000 mm turning length: 22000 mm total power requirement: 36 kW weight of the machine ca.: 53,5 t dimensions of the machine ca.: m Facing and Centering Lathe with plate field - Max. Turning diameter over the bed slide 4000 mm - Max. Turning diameter 5000 mm - Max. Turning length: 22000 mm - Face plate speed range 0.9 - 56 rpm - Faceplate diameter 4420 mm - Max. Workpiece weight between the centers: 20 t - Max. workpiece weight -without tailstock: 12,5 t - Two bed slides with 4500 mm turning length - With plate fields - A roller block - With tailstock Machine was overhauled in Italy in 2014 with stepless speed control. After the overhaul, the lathe was no longer operational. Machine is dismantled and stored near Hamburg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 220 mm, 340 mm, 1500 mm
With removable bed
used
pressure: 63 t distance between columns: 320 mm stroke: 8 - 120 mm table-size: 800 x 600 mm ram surface: 500 x 400 mm throat: 315 mm dayligth: 410 mm ram adjustment: 70 mm no. of strokes: 56 / 90 Hub/min total power requirement: 6 kW weight of the machine ca.: 5,5 t dimensions: 2,10 x 1,52 x 2,72 m inclinable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
table length: 700 mm table width: 700 mm table height: 630 mm power capacity: kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 0,9 x 0,8 x 0,7 m partial adjustable cube table - 30° in mint condition, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
centre distance: 5000 mm turning diameter over bed: 4000 mm turning dia. in gap: 5000 mm spindle bore: 104 mm turning speeds: 1,4 - 71 (18x) U/min total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw face plate Ø 3.150 mm modular lathe! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
table length: 2000 mm table width: 1800 mm table load: 12,5 t total power requirement: 10 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features Telescopic covers for the guides. Infinitely variable table feed. Optical display for setting and reading the longitudinal adjustment. Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power ...
used
max. width of grinding wheel: 50 mm ratio: 0 max. dia. of grinding wheel: 400 mm total power requirement: 3 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m Pre-Dressing Device for Gear Grinding Wheels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
diameter: 255 mm numer of jaw: 3 Stück bore: 82 mm Total height: 130 mm weight: 25 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
stroke adjustable from - to: 0 - 150 mm faceplate diameter: 300 mm taper MK: für MK6 weight of the machine ca.: 0,05 t : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Spindle diameter: 0 mm Longitudinal X: 9000 mm Vertical Y: 4000 mm Cross Z: 1000 mm Positions ATC: 80 Table length: 2500 mm Table width: 2500 mm Number of tables: 1 CNC Brand: Heidenhain CNC Model: TNC 430 WMW - BP 160 CNC Floor type Horizontal borer Ø 160 with Y 4000 mm MACH - ID 6368 Make: WMW Type: BP 160 Control: HeidenHain TNC 430 YOP: 2001 X – Travel 9.000 mm Y – Travel 4.000 mm Z – Travel 1.000 mm W – Travel 800 mm Table Length 2.500 mm Table Width 2.500 mm Table load 30.000 kg Speeds / ranges 2000 Rpm Power 52 kW Ram size 500 x 620 mm Spindle Taper Iso 50 IS ...
used
Capacity: 250 t Stroke: 10 mm Distance column/center (Throat): 360 mm Table length: 900 mm Table width: 630 mm MAKE WMW Zeulenroda TYPE PYE 250 N YEAR 80 er SPECIFICATIONS Hydraulic / Mechanical HydraulicPress force 250 Ton Table Length x Width 900 x 630 mm Throat360 mm Die height 1000 mm Stroke Length 500 mm Power 11 kW DIMENSIONS Length 1250 mm Width 2000 mm Height 3800 mm
used
grinding length: max. 630 mm grinding width: max. 200 mm workpiece height: . mm x-axis: max. 250 mm y-axis: max. 710 mm distance spindle center to table: max. 500 mm table surface area: 0,25 mm table load: max. 1,1 t table speed -stepless-: 2 - 18 m/min cross feed autom.: . dust exhaust: 0,25 kW coolant pump: 0,09 kW total power requirement: ca. 4,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke, - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed The data for this ad was cr ...
used
Hydraulic scissor lift manufacturer WMW type HT 20500Masch. -No: 16 built in 1990Load capacity: 2000 kgTable size: 2500 x 1250 mmLifting height: 1600 mmHeight: 440 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Vertical slotting machine make WMW Meuselwitz type StS 400Serial no. 4178.20.61, built in 1961Technical specifications:Stroke: 400 mmRound table diameter: 850 mm6 ram strokes: 18 - 56 / minCutting speed: 2 - 70 m / minFeed per cut: 0.14 - 1.4 mmConnected load: 9 kWExternal dimensions L x W x H: 2800 x 2000 x 3300 mmWeight: 6200 kgwith- swivel headused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools