wila used for sale

Key data: 170 t, 3110 mm

Inv. Num. : 7140 Type: HG 1703 Producer: Amada Created: 2022 Parameters: Control system: AMADA AMNC 3i Duty cycle: 6664 h Hours: 5511 h Number of strokes: 450794 Compressive force: 170 t Maximum bending length: 3110 mm Maximum ram stroke: 250 mm Maximum lifting speed: 220 mm/s Maximum bending speed: 20 mm/s Maximum retraction speed: 250 mm/s Total power requirement: 30 kW Machine weight: 15000 kg Equipment: 5-axis backgauge Footswitch with panic stop function Angle Measuring System Digipro Safety device AKAS III Wila tenses Handwheel

Key data: 44 t, 1600 mm, 1550 mm

Electric Press Brake C15 CoastOne - Made in Finland Pressing force: 44T Bending length: 1600mm Spindles: 2x22T Light barrier: Lazersafe IRIS Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake tool holder: Hydraulic WILA tool clamping up / down 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Hydraulic press brake: DURMA type E30200, rb: 2010. Bending length: 3100 mm; Between columns: 2650 mm Stroke: 210 mm; Pressure: 200 t CNC controlled press Cybelec DU6000, controlled axes -Y1-Y2-X; R + CNC Wila Moducrown table bending compensation. Fiessler AKAS laser workspace protection. Machine weight 12.5 t. 18 kW drives. Central lubrication of slides and guides. Tools - set of tools syst. Amada for 3100 mm. Original DTR, Bi&S workstation manual. Under current only 352 rhours, new machine condition. For the machine we offer service, commissioning, operator training, etc.

In very good technical condition, the SAFAN Lochem Holland hydraulic press brake rb. 1990/2012, type DNCS 110-3100. Press rebuilt by the manufacturer in 2012. CNC-controlled synchronous machine DNCS ARA- controlled axes- Y1; Y2; R; Crow - Wila table deflection compensation controlled by CNC. In addition, a hydraulic matrix for sheet metal folding-flattening, type DT005, controlled by CNC. The machine is equipped with an automatic sheet support system during bending and flattening at 2 heights. Hydraulic punch clamping. 4 bumper fingers with precision. Pressure 110 t x working length 3100. Between the sides 2600 mm. Machine weight 8.3 t. Drives 7.5 kW. Protection of the working area with infrared. A set of Amada / Trumpf system tools for the entire length of the machine, die V = 8 mm / angle 28 degrees and punch 28 degrees / h = 105 mm. This enables the 6 mm long window sill to b ...

pressure: 100 t chamfer lenght: 3000 mm distance between columns: 2700 mm Control: AMADA AMNC II-PC throat: 415 mm stroke: 200 mm dayligth: 500 mm adjustment of the rear stops: 600 mm table width: 60 mm number of controlled axis: 7 ajustment speed: 200 mm/sec bending speed: 20 mm/sec total power requirement: 5,3 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: m Includes: -Matrix holder for 1V matrices, pluggable, total height with holder: 140mm -Status indicator light -5-axis backgauge with stop sensor system Folding robot: ASTRO-100 NT Includes: -Standard gripper -Reposition gripper on the upper press beam -Regripping support for large workpieces - pneumatically driven Technical data see PDF attachment. Handling robot: ASTRO-MP20 Includes: -Loading table with spreading magnets -Vacuum gripper Medium and Large -Combi gripper (suction/gripping) for vertical loading -Dev ...

Brand new hydraulic press brake: MSE Hilalsan Netherlands type Advanced CAP 3175 rb: 2019 Bending length: 3100 mm Between columns: 2600 mm Loading: 410 mm Opening: 485 mm Bumper spacing 750 mm Pressure: 175 tons CNC press Delem DA58 T, color, graphics, touch screen, Polish. Controlled axes -Y1-Y2-X-X1-R-Z1-Z2 + Wila CNC table deflection arrow compensation. Machine weight 10 t. Drives 15 kW. Full original manual DTR, Health and Safety in Polish.

Press brake with servo-electric drive Safan Holland type SMK-P-50-2550 -TS1, rb. 1999. Touch screen - LCD Windows, color, graphics, menu in Polish. Bending length: 2550 mm; Stroke: 215 mm; Between columns: 2650 mm; Pressure: 50 t CNC TS1 control - 2D simulation, language Polish - Y1 controlled axes; Y2; X; R; Z1; Z2 -10 point compensation of the table deflection arrow. Infrared barriers are installed in the machine to protect the working area. Tools: Trumpf-Wila - set. Drive; 9 kW; dimensions: 3500x1800x 2450 mm, weight 5500 kg. Full O&M documentation, also in Polish, BiHP workstation manual in Polish.

pressure: 130 t chamfer lenght: 3060 mm distance between columns: 2690 mm column arm: 410 mm stroke: 365 mm dayligth: 535 mm ajustment speed: 200 mm/sec working feed: 1-10 mm/sec return speed: 135 mm/sec table width: 120 mm table height: 1050 mm tiltable up to: +/- 10 mm Number of working hours: 26.937 h compressed air: 5.0 - 7.0 bar oil volume: 250 l operating pressure: 340 bar voltage: 400 V total power requirement: 16.0 KVA weight of the machine ca.: 12950 kg range L-W-H: 3640 x 2210 x 2885 mm maintained condition () - - - - - - - - - - - - - - HIGH-SPEED electro-hydraulic press brake with: increased installation height increased cylinder stroke - - - - - - - - - - - - - - Furnishing: - CNC electro-hydraulic die bending press - including DELEM CNC control model DA 65 Swivel control panel, front left 2D graphical programming & product display Tool & program library - CNC controlled ...

pressure: 135 t chamfer lenght: 4050 mm distance between columns: 3150 mm throat: 200 mm dayligth: 310 mm piston stroke: 130 mm ajustment speed: 100 mm/sec working feed: 8.0 mm/sec return speed: 65.0 mm/sec table width: 180 mm table height: 900 mm Control: ELGO P8822 pressure: 220 bar total power requirement: 8.5 kW weight: 8700 kg range L-W-H: 4500 x 1700 x 2640 mm from a maintenance workshop maintained condition () Furnishing: - simple NC electro-hydraulic press brake - with ELGO digital control unit - model P8822 Positioning of the back gauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Swivel control panel, front right - electro-motorized back gauge (X axis) with digital ELGO position display 2x manually adjustable stop fingers (R+Z axis) - WILA manual table cambering, with analogue actual value display - split deer foot upper tool: https://www.ukb-gmbh.de/de/1652 ...

pressure: 225 t chamfer lenght: 3050 mm distance between columns: 2550 mm column arm: 300 mm ajustment speed: 110 mm/sec work speed: 9.0 mm/sec return speed: 130 mm/sec work stroke: 240 mm dayligth: 320 - 560 mm table height: 1000 mm table width: 200 mm oil volume: 350 ltr. operating pressure: max. 296 bar air pressure: 4.5 - 6.0 bar voltage: 400 Volt total power requirement: 18.5 kW weight: 14900 kg range L-W-H: 5180 x 2400 x 3100 mm Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control ModEva 12S, swiveling at the front right High-resolution graphic color screen 14 inches Representation as a line, area or volume drawing of the product Clear, concise menus in the operators language Large tools and products library - CNC-controlled back gauge adjustment (X-axis) Stop range X axis of bending line .. 5.0 - 1.000 mm Adjustment speed .. max. 250 mm/sec. - CN ...

Key data: 250 t, 3200 mm, 3200 mm

Electric Press Brake Bull30 CoastOne Oy - Made in Finland Spindle drive - 5 controlled spindles Directly controlled crowning in the upper beam Pressing force: 2500kN Bending length: 3100mm Light barrier: Lazersafe IRIS Tool clamping: WILA hydraulic Back gauge: X-R-Z1-Z2 controlled Control: TC15-2D Graphics Control Front support arms, height-adjustable and foldable Work light at the front and in the stop area Price and delivery time on request Other equipment options on request Warranty: 36 months after installation

Key data: 30 t, 900 mm, 850 mm

Fast Electric Press Brake C9HS - High Speed CoastOne - Made in Finland Pressing force: 30T Y-axis, feed speed 250mm/s X-axis, speed 1000 mm/s Bending length: 900mm Spindles: 1x30T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS Backgauge: 5 axis controlled X-R-Z1-Z2-Dx axes Press brake tool holder: manual type WILA / Trumpf / type B / R2 Front folding support table Light work area front and rear 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Description: The Adira PA16030 is an unused press brake with a 1600 kN capacity and 3000 mm working length. Control Control System: CYB Touch 8 Numerical Control: Cybelec VisiPAC Working Parameters Condition: New/Unused Capacity: 1600 kN Working Length: 3000 mm Distance Between Housings: 2550 mm Max Stroke: 260 mm Max Open Height Without Tools: 500 mm Throat Depth: 400 mm Motor and Power Motor Power: 15 kW Speed Approach Speed: 150 mm/s Working Speed: 10 mm/s Returns Speed: 150 mm/s Speed X: 800 mm/s Speed R: 200 mm/s Speed Z-Z1/Z2: 1200 mm/s Speed X1: 100 mm/s Axis Travel Stroke X: 625 mm Stroke R: 200 mm Stroke Z-Z1/Z2: 90 to 2150 mm Stroke X1: +/- 100 mm Dimensions Length: 3760 mm Width: 1840 mm Height: 2910 mm Transportation Height: 2710 mm Weight Weight: 7900 kg Extra Equipment Table: 13 mm for Wila type Dies 'Table Kit III' Back Ga ...