wheel excavator used for sale

Cutting discs, new, various dimensions. Flat and depressed. Original packaging. List exists. Price â?¬ 1,20 / kg

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

ROLLER TABLE BLASTING SYSTEM MANUFACTURER: WHEELABRATOR BERGER TYPE: CRC 400X300 Blasting machining of profiles and sheets Manufacturer: Wheelabrator Berger Type: CRC 400x300 Throughput width: 400mm Throughput height: 300mm Centrifugal wheel: 4 pieces x 4 kW frequency controlled Inlet roller conveyor: approx. 6,000mm Discharge roller coaster: approx. 6,000mm Incl. blow-off station, control cabinet, etc. TOP CONDITION ROLLER BLAST MACHINE BRAND : WHEELABRATOR BERGER TYPE: CRC 400X300 Blasting processing of profiles and sheets. Brand: Wheelabrator Berger Type: CRC 400x300 Inlet Width: 400mm Inlet High: 300mm Wheels: 4 x 4,0kW with Drivers Inlet roll table: ca.6.000mm Outlet roll table: approx. 6.000mm Blowstation: YES Incld. Main Panel., Very good condition! Price: Loading on truck .-€ Price: Loading on Truck .-€ Warranty: 6 months f ...

As good as new arm down machine with 2 needles, needle spacing 6.4 mm

entry dimensions: 1000 mm wide / 4000 mm high length of chamber: 3500 mm 4 turbines, 5,5 kW each material speed: 63 m/sec 150 kg/min abrasive material per turbine max workpiece weight: 500 kg electric power: 45 kW Kind off: shot blasting unit Turbines: 4 turbines - 5,5 kW each

Roller conveyor type G with Titan blastwheels max entrance width: 1100 mm max entrace height: 550 mm 4 turbines, each 11 kW working speed: 1,4 gt; 2,4 m/min Total power: 62kW Installed on top of floor, no foundation needed! 65 000€ spare parts inlcuded Length : 15 meter Width : 3 meter Height: 5,35 meter Weight: 20 ton

Landing gear, support wheel, swivel wheel -Manufacturer: Jungheinrich, chassis jockey wheel swivel wheel from pedestrian stacker type: ERC 205 -Wheel size: 140 x 54 Type GF106-G3 2.0 kW -Dimensions: 240/190/H280 mm -Weight: 16.6 kg

We sell a wheel excavator ZM12 without motor

Manufacturer PWH Flow capacity 400 m3 hour of bulk material Grit 0 to 30 mm Bulk weight 0.84 to 0.90 to / m3 Water content 18% Heap height 12 meters Operating voltage 380 V Control voltage 220 V Bucket capacity: 100 litres • Number of shovels: 8 pieces • Bulk per minute: 60 • Theoretical power: 360 m3/h • Effective power: 280 m3/h • Bucket wheel diameter: 3.45 m • Circumferential force (wheel): 15,000 N • Cutting speed on the knife: 1.35 m/sec • Removal height (heap height): 12 m • Discharge of the lowered wheel: 11 m • Lifting height on the paddle wheel: 6 m • Lifting speed on the paddle wheel: approx. 3 m/min • Senovice speed on the paddle wheel: approx. 3m/min • Swivel speed: approx. 12 m/min • Angle of rotation of the trolley (suspension): 360 • Angle of rotation of the trolley

Mobile excavator TEREX / Atlas Type TW160 Y.O.M. 2010 approx. 6,300 hrs - Hydraulic adjusting boom - Quick-change system for shovel - Gripper piping - Rear-view camera - Clearing sign (unused) available. - With Rototilt (shovel can be rotated and tilted 360 degrees. Additional grippers e.g. for setting telephone poles or lanterns. (last picture) Video can be submitted on request. The clearing sign was dismantled because the excavator was used as a two-way excavator with a rail handle (without DB approval). Mechanically very little stressed excavators. The enclosed clearing shield must be adjusted to the recording. Visually and technically good condition. Bdxbjqofbb Tires bad (can be renewed on request at an extra cost)

Manufacturer: Samsung Model: Excavator Built: 2004 Dimensions ( L x W x H ): 1700 x 1950 x 2400 mm

LIUGONG Wheel Loader 877H

For sale is a two-shell gripper of the Liebherr brand. The gripper is in good condition. Please take the dimensions from the pictures. Teeth present Stem width 28,5cm, Sale in existing condition, as seen in the pictures. Price: 1750 €

Mecalac 12 MXT wheeled wheeled excavator, 9300 kg, max trench depth 400cm, maximum speed 35km, Cummins 4 cyl. Motor, with 1 backhoe bucket

Spicer Type 176/174-003 Drive Axle Price per piece Condition: New Final Drive Ratio: 1:6.23 10-Bolt Hub with an approximate bolt circle diameter of 340 mm Shipping Weight: 565 kg per piece Availability: 2 units Tags: Steering axle, truck drive axle, Dana R-ITA-703441

If you are interested, please contact us!

fully hydraulic wheeled excavator Liebherr 912, built in 1986 4 times twin tyres. 70 KW 6 cylinder Deutz engine. Rideable on the road. Additional hydraulic connections for chisels. Device is operational. Equipment : trench bucket, bowl gripper, 3 normal spoons in different widths. Total weight 18 tons (can be driven on a low-loader)

Wheeled excavator / material handler, Manufacturer: TEREX, Type: TM230, Year of manufacture: 2008, Fuel: Diesel, KW: 114,0, Gross vehicle weight (kg): 23,000, Read operating hours (h): 7,228, Serial no.: 230M301348, Condition: lower cab window defective, Replacement windshield supplied, Operating hours Hydraulics: 1,762 h, operating hours Driving: 4,992 h, Engine type: OSB6.7/114, Liftable driver's cab, with front and rear outriggers, all inspections/UVV/oil change last carried out by ATLAS in November 2023, with peel grab/spider ATLAS, serial no.: 555E, with electrical connection for lifting magnet, steering column/rain roof window/silencer/floor plates new

Liebherr handling excavator in top condition with HD suspension, balloon tires, gelaendefaehig! Type 932 Litronic HD HD chassis Weight approx. 37,000kg Built in 2001 magnetic system, automatic levelling at discontinuation, boom 7m, stem 5m, Preheater for motor oil and hydraulic oil. Strong lifting force, e.g. mobile without settling over 10,000kg. technically very good condition. optional accessory (available at an additional cost): G3pdl8ila Quick-change system Shovel for earth movement Magnet or swivel magnet Gripper for scrap Clamp for round material such as baeums or pipes Transport mass: Width 3,000mm Length without sti-steal6,000mm Transport height 3,560mm Former new price approx. 890.000.-DM Special price

Fabr. BABCOCK, type: 500 NVD, electric drive 3 KW, inlet diameter = wheel diameter: 600 mm, height 500 mm, 13 pieces available, for extracting fine dusts

2 pieces of tyres with rims good state 85% of profile receive, became from follower taken

a palette with 145 kg - 4 pieces new Schleifscheiben D=350mm, 2 pieces used Schleifscheiben with flange, 10x Abrichtrollen. a palette with 319 kg - 4 pieces Schleifscheiben D=400mm uses with flange and an Abrichtrolle.eine palette with 257 kg - 22 pieces Abrichtrollen with flange

4 PCs. measurement and control cabinets with a swivelling frame and others with drawers and shrouds. Inside some with ventilation and with mounting plate. In frame door socket. Side panel with main switch. As Rittal IT units however incl. fittings. Size H/B/T 2000/800/550 The price is per measurement unit.

Cauldron standing on 4 wheels Manufacturer: Appointed Serial No.: -. Year of construction: 1971 Volume: 150 LTR. Material: 1.4541 In the pressroom: Operating pressure: 5 bar Capacity: 20 LTR. Operating temperature: 158 ° C In the loading space: Content: 150 LTR. Operating temperature: 100 ° C Dimensions: Bowl ø: approx. 540 mm Interior height front: approx. 640 mm Interior height rear: 580 mm L x W x H: 700 x 700 x 1,100 mm (with wheels) Containers with heating jacket with sloping to the spout, tank outer shape rectangular, marbled at top: 1 hinged lid approx. 600 mm diameter with hinge and handle on the front: 1 temperature display 1 valve 1 " 1 spout DN 32 with shut-off valve at the back: Heating valve

Robust rotary valve with inlet and outlet diameter 275 mm, drive via gear motor 0.25 kW / 35 UPM. Several identical locks available (Built between 2000 and 2007), very good condition, partly unused.

Gear wheel, crankshaft Part no. 110014 NEW

Gear Deutz 816 NEW Part number: 0405 4284 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Wheel diameter 120 mm Wheel width 60 mm Wheel diametre hole 35 mm

Rotary valve Electrical power: 1.5 kW; ready for use

Diameter: 2.0 m, width: 500 mm, trough: approx. 2,000 x 1,000 mm, capacity: 10 tons / h (0-4mm), E - motor with 3.6 kW

Type 6202RS Thread diameter 8 mm Wheel diameter 43 mm Wheel width 15 mm Total length 40 mm

Div. Interchangeable wheels for the gearbox, C-axis table; B-axis milling spindle Drezahl

Various interchangeable wheels for the gearbox Speed...

blower power: 19 kW motor: . bucket: Diesel . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cell wheel lock made of noble steel unused KREISEL Environmental Technology Type: ADG 630 x 800 x 21-24 Z Built: 2005 Inlet opening: approx. 800 x 500 mm Outlet opening: approx. 800 x 500 mm Cell wheel diameter: 630 mm Number of cells: 12 Cell depth: approx. 200 mm Cell wheel made of stainless steel Housing made of steel Geared motor : SEW-EURODRIVE Type :RF107 AR132S/MWEX/II3GD DV132M4/TFII36D 7.5 kW 24 rpm 230/400 V IP65 Motor Ex protected! Total dimensions: approx. 2700 x 800 x 800 mm

Tooth and chain wheels for feed

Blow-through lock, supply, cell lock, cell wheel lock, cell wheel lock, dosing lock used AZO Ltd. Type: Z100/2P Inlet approx.: 250 mm Height approx. 450 mm Cell wheel approx. 320 mm Cell wheel width approx. 250 mm approx. 8 cells Hole circle flange approx. 335 mm with suction filter Geared motor with variable speed LENZE 11.342.13.12 0.5 kW 3.3 to 50 rpm 220/380 V Total dimensions approx.: 1500 x 600 x 450 mm The lock was used in the food industry. Probably for transport and dosage of sugar. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Heavy-duty wheels, swivel castors, castors, solid rubber castors Outer diameter: 240 mm Bore: 30 mm Rubber thickness: 30 mm Quantity: 90 Sold as shown All information without guarantee

max. wheel diameter: 1600 mm gear width: 457 mm max. module: 12,5 min. module: 2 spindle bore: 222 mm stroke: 15-120 Hub/min roll feed: 0.3 - 0.84 mm/min down feeds: mm/Hub electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 10 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 3,5 x 3,3 x 2,5 m EXTERNAL GEARS: Blank diameter:- Max 63 1600 mm Min 0 0 Face width, double helical 0 - 18 0 - 457 mm Face width, spur or single helical 0 - 10 0 - 254 mm INTERNAL GEARS: Blank diameter:- Max 66 1676 mm Face width 0 - 8 0 - 203 mm P.C.D.:- Max 66- (2 x rim thickness) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. width of grinding wheel: 300 mm diameter / bore of grinding wheel: 60 mm Flange taper: Reishauer each piece 200,-Eur The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

external diameter: 762 mm internal diameter: 304,8 mm width: 36 - 42 - 64 mm Unused grinding wheels Ø 762x304,8 mm! 2x36 mm width Norton 1x64 mm width Norton 1x42 mm width Krebs 4x64 mm width Krebs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 0 mm y-travel: 0 mm table length: 600 mm table width: 400 mm total power requirement: 2 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. width of grinding wheel: 50 mm ratio: 0 max. dia. of grinding wheel: 400 mm total power requirement: 3 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m Pre-Dressing Device for Gear Grinding Wheels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General Manufactured by TBMA Europe BV Type Har 200 #00271200 Key Features Material Steel Engine Nord 230/380V 055 kw Inlet diameter 200 mm Specified properties – rotary lock Material Steel Rotary lock Yes Rotor with scrapers Yes Rotor diameter 250 mm Rotor width 260 mm Number of faces 8 Compartment dimensions 100 mm x 260 mm Inlet diameter 200 mm Surface dimensions Inlet flange dimensions Ø 340 stc295 8xØ24 mm Exhaust Ø200 Exhaust flange dimensions Ø340 stc 295 8x Ø24 mm Installation height 370 mm Excluding Gaskets With Motor Yes Rotor speed 13rpm External Bearings Yes With socket gasket Yes Information Total height 370 mm Weight 160 Kg Floor area 650 mm x 650 mm Additional Specification

KOLTECH TUU 1250 CNC above floor wheel lathe was manufactured in Poland in 2007. The wheel lathe is a special-purpose machine designed for the turning process of the running profile of wheelsets used in various types of rail vehicles. The lathe uses high-end components to guarantee efficient and precise machining of both used and new wheelsets for the railway industry. The solidly constructed structure with friction drive allows a wheelset with a maximum weight of 4 tonnes to be fed into and out of the machine from hall level. The TUU1250 machine performs the following operations: – reconditioning of the wheel profile of used wheelsets, – turning of the wheel profiles of new wheelsets, – turning of the clamping ring of the wheelset wheels, – facing of the inner and outer face surfaces of the wheels, – facing of the active surfaces of brake discs, installed on the wheels ...

Elster SM-RI-X-E G1600 Turbine Wheel Gas Meter Elster Turbine Wheel Gas Meters SM-RI-X-E-G1600-200-98.5-K (170) Qmax: 2500 m³/h Qmin: 130 m³/h pmax: 89.5 bar Item #: 10520813-2014 Pulse generator HF2 162,370 Imp/m³ Regular price: 21.540,-€ net

Wagon on wheels,stainless steel,2 shelves,L 520 x W 510 x H 1660 mm.

Grinding wheel, bench grinder, surface grinder, cylindrical grinder -Inside: Ø 127 mm -External: Ø 300 mm - Width: 18mm -Price per piece -Number: 1 piece available -Weight: 1.9kg

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 8 mm -Price: per piece -Number: 10x available -Weight: 0.9 kg

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 6 mm -Price: per piece -Number: 40x available -Weight: 0.6 kg