welding tig used for sale

Maximum welding power 104 kVA Arm spacing 100 - 500 mm Projection 500 mm Air pressure 60bar

Stick electrodes 5.0 x 450 -Type: FOX MST -Price: per package -Number: 2 packages available -Weight per package: 6.2 kg

length: 1500 mm width: 1000 mm table height: 250 mm work height max.: 1100 mm Material: Stahlguss 0 total power requirement: kW weight of the machine ca.: 900 Kg dimensions of the machine ca.: 1,5 x 12,0 x 1,1 m Measuring plate on 3 adjustable feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 690 mm table load: 500 / 250 Kg turning speeds: 0,5 - 3,2 U/min Torque: Drehen 1200 Nm spindle bore: 100 mm swivelling range: 0 - 90 Grad tilt adjustment: manually/mechanicall: maschinell : Kippen 1500 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with hollow shaft 500kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 495 mm table load: 300 / 150 Kg swivelling range: 0 - 90 Grad tilt adjustment: manually/mechanicall: manuell turning speeds: 0,5 - 3,2 U/min spindle bore: 65 mm Torque: 375 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with hollow shaft 300kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stick electrodes 2.5 x 250 -Type: FOX CM 2 Kb -Price: per package -Number: 8 packages available -Weight per package: 3.3 kg

Stick electrodes 4.0 x 350 -Type: Phoenix Green S -Price: per package -Number: 1 packages available -Weight per package: 4.7 kg

Stick electrodes 2.5 x 350 -Type: Overcord -Price: per package -Number: 5 packages available -Weight per package: 4.8 kg

Gas-shielded welding machine with pulse function, MIG/MAG pulse welding system max. welding power: 330 A Remote control connection 4-roller drive Water-cooled with: detachable wire feeder incl. ground cable Gas fitting Dimensions: 655/900/H1495 mm Good condition.

Tecna 3484 Universal spot welding system 8 kVA Universal welding station 8 kVA, hand-operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, which saves time and avoids errors in terms of a simple and safe workflow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, denting of stainless steel sheet. Synchronous SCR welding control, adjustment of welding time in cycles and pulses, adjustment of welding current and compensation function. Power supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %DC: 8 kVA Max. welding power: 35 kVA Max. secondary current: 6.4 kA Heat flow 100 %: 0.88 kA Year: 2014 Weight: 85 kg More items - new and used - can be found in our shop! Interna ...

Offer 23108 Specifications: - Welding current max. 550 A 60% ED - 420 A 100% ED - Welding current adjustable 50 A - 550 A - 3 coarse steps + 12 fine steps - Separate wire feeder case with between package 4 m - 4 roller wire feeders infinitely adjustable 0.5 - 24 m/min - 2 stroke + 4 stroke - regulation - water-cooled hose package approx. 4 rm - Ground cable -Reducer - Connection 400 V / 64 A - Space requirement approx. W 550 x H 1310 x D 1050 mm - Weight approx. 150 kg

Stick electrodes 4.0 x 350 -Type: OK 63.30 -Price: per package -Number: 2 packages available -Weight per package: 4.6 kg

length: mm height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Pulse welder Hybrid 4002 Year of manufacture 2005 Feeding device / 4 rolls wire feed DV 39 machine no.: 940 16 222 - Welding hose 4000mm - Ground cable 70 square 5000mm - Intermediate hose package approx. 4000mm - Hose package Binzel MB511 Pulse current The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stick electrodes 4.0 x 450 -Type: Phoenix 120K -Price: per package -Number: 9 packages available -Weight per package: 5.9 kg

Stick electrodes 4.0 x 450 -Type: Thyssen 600 Violet W -Price: per package -Number: 14 packages available -Weight per package: 6.2 kg

Stick electrodes 4.0 x 450 -Type: SH Green K 50 W -Price: per package -Number: 6 packages available -Weight per package: 6.2 kg

Stick electrodes 4.0 x 350 -Type: Phoenix Green T -Price: per package -Number: 4 packages available -Weight per package: 4.6 kg

table length: 1500 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,8 t dimensions: 1,5 x 1,5 x 0,9 m Welding table SIEGMUND Professional Extreme 850 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,8 t dimensions: 1,5 x 1,5 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Serial No. 130.233 Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 2 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves wi ...

Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 4DF 16 EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of manufacture : 1997 Voltage: 3x 400V Power : 15kW Frequency : 50Hz Capacity : Unknown Dimensions can be measured if necessary.

Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum.

Stick electrodes 3.2 x 350 -Type: Phoenix K 50 -Price: per package -Number: 6 packages available -Weight per package: 4.5 kg

Stick electrodes 3.2 x 350 -Type: P84CR -Price: per package -Number: 1 packages available -Weight per package: 2.3 kg

Stick electrodes 3.2 x 350 -Type: P83CR -Price: per package -Number: 1 packages available -Weight per package: 2 kg

Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of construction: 1995 Voltage : 660 V Power : 4 kW Frequency : 50Hz Capacity : Unknown

Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: Unknown Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of manufacture: Unknown Voltage : Unknown Power : 18,5kW Frequency : 50Hz Capacity : 3.33 m³/s approx. 20.000m³/h The plants are all dismantled and stored on pallets

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 6 months Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves with cuff 1 piece sp ...

ABB Robotics IRB 1400 compact welding cell with manual rotary table and Fronius TPS 4000 welding machine Overall dimensions: approx. 4000x2350mm Robot: ABB Robotics IRB 1400 Control: S4-M98A Max. working radius: approx. 1450mm Load capacity: 5kg Year of construction: 1998

One used SCHLATTER automatic binding unit for welded mesh stacks. Comprising a left and right unit; automatically binds the mesh stack

Stick electrodes 2.5 x 300 -Type: P81CR -Price: per package -Number: 2 packages available -Weight per package: 1.8 kg

Stick electrodes 2.5 x 300 -Type: P83CR -Price: per package -Number: 7 packages available -Weight per package: 1.6 kg

Stud welding robot for thread M5 (convertible) KUKA KR 180 KRC2 complete Control: KRC2 Number of axes: 6 Max. payload: 180 kg Max. working range: approx. 2700mm Year of construction: 2003 Scope of delivery: robot, controller, cable, teach panel, circuit diagrams, stud welding machine

Machine type: Pulse arc inverter welding machine Make: Rehm Type Megapuls 500 Attachment no. 228.434 Connection voltage 3 x 400 volts Setting range 10 – 500 amps Duty cycle 45 % d.c. at 500 amps 60% d.c. at 450 amps 100% d.c. at 350 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive Fuse 32 amps Dimensions L x W x H 1,030 x 600 x 1,300 mm Weight 175 kg Special accessories for filter attachment and wheels on the DV box Age approx. 10 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauge ...

Stick electrodes 4.0 x 350 -Type: Hera Blau N -Price: per package -Number: 4 packages available -Weight per package: 4.7 kg

KUKA KR16 L6 ARC-C robotic welding machine together with the PO-2t6m-01 rotary positioner was commissioned in 2017 and its purpose was to very precisely weld gates and fence spans, but it can also weld various types of structures that fit within the range of the rotary positioner. The welding station includes a robotic arm built in 2009, which was previously only used for testing. The whole thing has only worked for 50 hours. The KUKA KR 16 L6 ARC-C robotic welding system is equipped with: – welding robot: KUKA KR16 L6 ARC-C – controller: KUKA KR C2 – rotary manipulator: PO-2t6m-01 – current power source: FRONIUS TransPuls Synergic 4000 CMT R – software: KUKA System Software (KKS) – torch cleaning device: TBi BRG-2-ES-DAE – wire feeder: FRONIUS ROBACTA DRIVE CMT – track The rail-moving KUKA KR16 ARC industrial robot with a reach of 6 m allows excellent preci ...

Machine type: Electrode welding rectifier Make EWS Attachment no.: 290.623 Type EW 130 Connection voltage 1 x 230 volts Setting range 3 – 130 amps Duty cycle 35 % d.c. at 130 amps 60% d.c. at 100 amps 100% d.c. at 90 amps Current adjustment infinitely variable max. weldable electrode 3.2 mm Ø Cooling by built-in fan Portable assembly line design Fuse 16 amps Dimensions L x W x H 340 x 170 x 220 mm Weight 6 kg Age approx. 15 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece facing glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 25 rod electrodes Böhler 2.5 x 350 mm 25 rod electrodes Böhler 3.2 x 350 mm Warranty 6 months from the date of delivery  ...

Machine type: MIG/MAG welding system Make: Werner Type Wemag 300 K-1 Connection voltage 3 x 400 volts Setting range 40 - 300 amps Duty cycle 60 % d.c. at 300 amps 100% d.c. at 230 amps Current setting 21 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile industrial plant Wire feed gearbox toothed 4-roller gearbox Fuse 32 amps Dimensions L x W x H 1100 x 420 x 720 mm Weight 135 kg Age: 32 Years Optional accessories 2-stroke / 4-stroke Condition workshop-tested, good, incl. UVV workshop test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece of pressure reducer argon with 2 pressure gauges 1 piece welding wire D-300, 5 kg 1 piece of welding gloves with cuff 1 piece spare parts box cpl. Equipped 1 piec ...

Stick electrodes 4.0 x 350 -Type: P81CR -Price: per package -Number: 5 packages available -Weight per package: 4.5 kg

Stick electrodes 3.2 x 300 -Type: CITOCHROMAX N -Price: per package -Number: 13 packages available -Weight per package: 2.9 kg

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 31 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Stick electrodes 4.0 x 350 -Type: Overcord -Price: per package -Number: 6 packages available -Weight per package: 4.8 kg

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 26 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Stick electrodes 3.2 x 350 -Type: Phoenix SH copper 1K -Price: per package -Number: 5 packages available -Weight per package: 4.4 kg

number: 37 Positionen : 28 mm condition: neu weight: 35 kg Basic set 2 49 pieces, 28mm system, consisting of: Forceps: 8 x 280604 Bolt: 12 x 280511 Stop: 8 x 280420.N Angle: 4 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 65 Positionen : 28 mm condition: neu weight: 49 kg Basic-Set 3 65 pieces, 28mm system, consisting of: Forceps: 10 x 280604 Bolt: 18 x 280511 Stop: 10 x 280420.N Angle: 6 x 280110.G Angle: 4 x 280162.N Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stick electrodes 2.5 x 350 -Type: P 48S -Price: per package -Number: 9 packages available -Weight per package: 4.5 kg

Stick electrodes 4.0 x 350 -Type: SL 19 G -AWS: A5.5-96: E8018-B2-H4 -Price: per package -Number: 10 packages available -Weight per package: 1.6 kg

Stick electrodes 3.2 x 350 -Type: FOX DCMS Kb -Price: per package -Number: 5 packages available -Weight per package: 4.3 kg

Ref. -No.: 10197 Manufacturer: N/A Storage location: Halberstadt