welding kemppi used for sale

Portable; including welding torch; welding hood; cables partially damaged; welding electrodes;

IGBT Technology, 200A inverter with digital display

Self-aligning rotators capacity driven unit: 20 ton capacity non-driven unit: 20 ton minimum diameter of workpiece: 450 mm maximum diameter of workpiece: 4600 mm roller dia: 381 mm roller width: 76 mm WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 40 ton Coating material on wheels: rubber Length: 2884 mm Width: 830 mm Height: 2010 mm

ATTENTION: without lattice boxes and without pallets (pallet exchange is possible)

Product description: Set welding current: 20-250 A. Phase 1, Duty cycle: 60%-250 A, Performance: 100% - 194 A. The diameter of the electrodes: 1.6 - 4.0 mm, The arc: Contact. Degree of protection: IP21S, welding label length: 2 m. Cooling: forced (fan). Size: 350x230x275mm Weight 5 kg.

without welding cable set

The machine consists of the following main components and is built identically as MA100156: ? Welding machine with turntable ? Clamping tools product ? Welding Equipment ? Welding fume extraction ? Plasma Module 10 ? Fronius ROB 4000 interface to plasma module ? Fronius ROB 5000 interface to TIG module ? Fronius hose package and welding torch ? Chilly35 cooler, 1 cooler for both power sources

4-in-1 mobile workstation with 5.5 kVA power generator with 230 Volt outlet, small/large (= function 1), welding machine with 200 Ampere current (= function 2); 1.35 kW air compressor, 10 litre tank capacity, 8 Bar (= function 3); Extendable telescopic light tower, mast height max. 450 cm, light pole (= function 4). equipped with 420 cm3 petrol engine; electric start + pull start; comes with a 12 Volt starter battery; unused

With gas cylinder and pressure control valve, Kempoweld 400 wire feeder,

Kempoweld 400 wire feeder

ATTENTION: without lattice boxes and without pallets (pallet exchange is possible)

Lastek Lastimig 300 welding machine; mobile

IGBT Technology, 200A inverter with digital display

SPECIFICATIONS: Mobile welding fume extraction with suction arm for welding fumes Installed capacity KW: 1.5

IGBT Technology, 200A inverter with digital display

Unused.

Welding helmet included;

IGBT Technology, 200A inverter with digital display

welder

incl. hose

Specifications: - BIA tested welding suction device - Articulated suction arm 3000 mm - Air volume flow approx. 1000 m³/h - static pressure 2700 pa - Filter area approx. m² - Filter control - Light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Machine type MIG/MAG welding system MerkLE brand Type M 254 K Connection voltage 3 x 400 Volt Setting range 25 – 250 amps Duty cycle 60 % ED at 250 Ampere 100% ED at 200 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 955 x 460 x 780 mm Weight 110 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 months warranty! 1 piec ...

Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...

IGBT Technology, 200A inverter with digital display

Spot welding guns --- Rated power at 50%ED: 25kVA Short circuit current: 22.5kA Electrode force: 600daN / double stroke Projection: 170mm --- - Electrode arm top-straight E34/25/170g - Electrode arm bottom-straight E34/8/170g --- Welding control: MPS 1036 (5 times, 1 program) --- Spring tension on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Welding current range : 150A/26V - 1000A/44V; with carriage, type: TR1501; with digital readout; including control cable, length approximately; 15 meters and intermediate pack and ground cable

Product description: Set welding current: 20-250 A. Phase 1, Duty cycle: 60%-250 A, Performance: 100% - 194 A. The diameter of the electrodes: 1.6 - 4.0 mm, The arc: Contact. Degree of protection: IP21S, welding label length: 2 m. Cooling: forced (fan). Size: 350x230x275mm Weight 5 kg.

including accessories; unused in box

table diameter: 350 mm table load: 100 / 50 Kg swivelling range: 0 - 90 manuell Grad turning speeds: 0,5 - 5,0 U/min spindle bore: 30 mm Torque: 75 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with - Footswitch - tilt over winch - Speed continuously adjustable - 500 amps welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Condition see pictures, function not known, spare parts carrier

Unused.

Unused.

Total height approximately: 2500 mm.

without welding torch and ground cable

with welding cable set

table length: 2000 mm table width: 1000 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,74 t dimensions: 2,0 x 1,0 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table size:1500x1500mm Load capacity : 6t Overall dimensions: 1600x2500x2000mm Hydraulic control

including accessories; unused in box

IGBT Technology, 200A inverter with digital display

Disassembled, swing arm

Magnetic welding machine - Total power: 1.5 kW - Machine weight: 20.5 kg - Space requirement (W x D x H): 0.765 x 0.305 x 0.155 m Details Heating carrier opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld width 3 mm