welding electrode used for sale

TIG-TIG Welding Machine Oerlikon DTW 251 A The device is untested. A suitable hose package is missing. The Oerlikon TIG welding hose shown does not have the correct connections, an adapter is missing (TIG connection adapter for the old Oerlikon central connection) Manufacturer: Oerlikon Schweißtechnik GmbH, Eisenberg/Palatinate. Made in Germany. Technical data: Mains connection 380 volts. Welding range 5 - 250 amps. Welding performance: 250 A / 20 V at 60% ED. 200 A / 28 V at 100% ED. Water cooling. High-frequency ignition (HF). Pulse welding function to minimize warping. Adjustable lowering current (crater fill flow). Also suitable for welding with rod electrodes. Condition & Scope of Delivery: Attention: Oerlikon TIG adapter is missing. Oerlikon hose package (not suitable!), TIG welding torches, remote control, and ground cables. Without gas bottle.  ...

Manufacturer: Trumpf Model: TruArc Weld 1000 Year: 2023 Condition: Used Stock number: 9392 Operating hours: 20 h Maximum arm reach: 1300 mm Number of axles: 6 pieces Source: Fronius TPS 320i C PULSE Rated current: 30 A Operating voltage: 24 V Machine weight: 2980 kg Height: 2818 mm Width: 2454 mm Length: 3605 mm The offer includes:, suction, Universal robot UR10e, Work table, Retractable partition wall, Linear axis, Protective cabin, Robot welding torches,

Gas metal arc welding machine, arc welding machine, MIG/MAG welding machine, pulse welding machine, inverter welding machine, impulse welding machine -Manufacturer: Ess, MIG-MAG shielded gas welding machine -Type: E1-3300 -Max. welding current: 330 A -Features: Water-cooled, remote control -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg

Welding machine Fabr. Migatronic Typ. Automig 273

volume capacity: - m³ / h total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 500 mm table load: 300 horizontal kg. table load: 150 vertikal kg. swivelling range: 0 - 90.0 Grad turning speeds: 0.2 - 2.5 U/min bore: 90.0 mm table height: ~ 650 mm mm motor: 230 Volt weight of the machine ca.: 90.0 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece dia.: 2-10 mm material: rust free/heat resistant steel: / welding process: 15-20 bolts /min at: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Product description: Siegmund retro offer incl. accessories: < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm Accessories: - 6 x Professional screw clamp, nitrided - 2 x stop and clamping angle 175 L nitrided - 10 x quick-clamping bolts without groove, double burnished - 8 x universal stop 225 L nitrided - 2 x stop and clamping bracket 500 G nitrided - 1 x accessory set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 150 mm bore: 22 mm weight: 530 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 22 mm weight: 740 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm Side panel height: 200 mm work height max.: 850 mm weight: 850 kg Special item - fair use - high-quality steel S355J2+N + plasma nitriding - Side panel holes in diagonal grid - Corners, edges and drill holes chamfered 45° - Construction reinforced with ribs - incl. basic foot equipment (working height 850 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 1075 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Product description: Siegmund retro offer incl. accessories: < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm Accessories: - 6 x Professional screw clamp, nitrided - 2 x stop and clamping angle 175 L nitrided - 10 x quick-clamping bolts without groove, double burnished - 8 x universal stop 225 L nitrided - 2 x stop and clamping bracket 500 G nitrided - 1 x accessory set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm weight: 1425 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 543 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 32 bore: 28 mm weight: 51,2 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 150 mm bore: 22 mm weight: 395 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mm table width: 1000 mm table height: 150 mm bore: 22 mm weight: 420 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mm table load: 7.000 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 0,9 UpM T-slots: 6 x M24 Tilt Angle: 90-180-100 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 3.050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speeds: 0,7-9,0 U/min Torque: 2,5-10 Nm table load capacity - central/maximum: 50 kg welding current: 400 A voltage: 230 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 1100 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 416 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 715 mm table load: 500 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 1 UpM T-slots: 6 x M16 Tilt Angle: 90-180-110 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 675 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 2000 mm table height: 200 mm bore: 28 mm weight: 1299 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 730 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm Side panel height: 200 mm work height max.: 850 mm weight: 850 kg Product description: Siegmund retro offer incl. accessories: < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >> - high-quality steel S355J2+N + plasma nitriding - Side panel holes in diagonal grid - Corners, edges and drill holes chamfered 45° - Construction reinforced with ribs - incl. basic foot equipment (working height 850 mm) Accessories: - 6 x Professional screw clamp, nitrided - 12 x quick-release bolts without groove, double burnished - 8 x universal fence 225 L nitrided - 2 x stop and clamping bracket 175 L nitrided - 2 x stop and clamping angle 500 G nitrided - 1 x accessory set - Eccentric stop Ø 60 with M10 thread nitrided - Hexagon ...

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 554 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 843 kg Specifications - High-quality S355J2+N steel + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole diameter 28 mm - Holes in 100×100 mm grid pattern - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing on side panel: 50 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups - Special equipment for welding tables is available on request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 960 mm table load: 3.500 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 0,9 UpM T-slots: 6 x M20 Tilt Angle: 70-90-180 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 1.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 918 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current capacity: 42 kVA contact pressure capacity: 600 kp weight of the machine ca.: 170 kg dimensions: 1200 x 900 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 544 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 521 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mm table load: 1.000 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 1,1 UpM T-slots: 6 x M16 Tilt Angle: 90-180-105 ° Tilting Speed: 30 sn min./90° dimensions: 2100x920x1100 mm weight of the machine ca.: 930 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 1000 mm table height: 150 mm bore: 22 mm weight: 300 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 585 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mm weight: 86 kg 4-163400 Consisting of: - 10x Professional screw clamp, burnished/nitrided - 4x Professional screw clamp 45°/90°, burnished - 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided - 30x quick-release bolts without groove, double burnished - 8x universal stop 80 L, nitrided - 10x universal stop 115 L, nitrided - 10x stop and clamping angle 90 X, nitrided - 10x stop and clamping angle 90 L, nitrided - 4x stop and clamping angle 300 G, nitrided - 1x set of stop and clamping angles 250 G with rotating angle, nitrided - 1x set of stop and clamping angles 500 GK, nitrided - 1x tool trolley, powder-coated - 1x accessory set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 554 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 124 bore: 28 mm weight: 326 kg 4-283500 consisting of: - 14x Professional screw clamp - nitrided - - 10x Professional screw clamp 45°/90° - nitrided - 8x Prism Ø 50 135° with screwed-in collar - nitrided - 36x Quick-clamping bolts without groove, double - burnished - 8x magnetic clamping bolts 68 - aluminum - 12x universal stop 150 L - nitrided - 12x universal stop 225 L - nitrided - 4x universal stop 500 S - nitrided - 12x stop and clamping bracket 175 L - nitrided - 2x stop and clamping bracket 300 G - nitrided - 2x stop and clamping bracket 500 G - nitrided - 1x stop and clamping bracket 500 G with rotation angle left - nitrided & stop and clamping bracket and clamping bracket 500 G with rotation angle right - nitrided - 1x stop and clamping bracket 750 G left - nitrided & stop and clamping bracket Clamping bracket 750 G right - nitrided - 1x stop and clamping bracket 800  ...

table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 392 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm material thickness: ca. 24,5 - 27 mm : 200 mm weight: ca. 1.553 kg Product description: Siegmund Retro Offer: Welding table as it was 25 years ago, additionally with plasma nitriding and current table feet. Welding table: - High-quality steel S355J2+N + plasma nitriding 200 - Holes surface 100x100 mm grid - Corners, edges, and holes 45° chamfered - Holes side panel in diagonal grid - Construction reinforced by ribs - Includes basic foot equipment (working height 850 mm) Accessories: - 6 x professional nitrided screw clamps - 12 x quick-release bolts without groove, double burnished - 8 x universal stop 225 L nitrided - 2 x stop and clamping angle 175 L nitrided - 2 x stop and clamping angle 500 G nitrided - 1 x accessory set - Eccentric stop Ø 60 with M10 thread, nitrided - Allen key size 6 - Brush Ø 30 with ...

table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 408 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 1 weight: 2,57 kg width: 265 mm height: 250 mm clamping force max.: 3 kN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current capacity: - kVA throat: - mm contact pressure capacity: - kp total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m No. 1244 CNC portal spot welding machine PEI PROG-2515 Working area: 2500 x 1500 Siemens control Welding capacity of the butt spot welder 3+3 mm Welding capacity of the gun 2+2 mm Feed rates: X+Y 800 mm/sec, Z: 400 mm/sec, A 120°/sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NEW PRICE: approx. 110.000€ KR Quantec 6-axis robot incl. KRC4 controller and robot control panel 12m Smart Pad, 3100mm reach, 20Kg payload External axis module for coupled rotary axis, mathematically coupled Kuka ArcTech Basic package Level 2 advanced TouchSense technology to minimize component tolerances Kuka Wiresense module During oscillation, the voltage is measured by the power source and the welding path is the welding path is shifted if the component warps. Function only for fillet welds incl. Lorch S5 SpeedPulse XT welding unit incl. automatic torch cleaning station Cutting device Cutter Welding cut-off spray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 690 mm table load: 500 kg swivelling range: 0 - 90 Grad table load: horizontal 500 Kg table load: vertikal 250 Kg boring diameter: 100 mm table turning speeds: 0,2 - 1,9 U/min total power requirement: 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in  ...

table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.