water treatment plant used for sale

As the exclusive sales partner of Ceetec A/S for the German-speaking region, I am pleased to introduce you to our P40 coating machines. The operating principle is very simple: In the front area, the workpiece is flooded all around with lacquer material (lacquer/glaze/impregnation/oil) and in the rear area 3 counter-running brushes pull off the excess material and massage it into the pores at the same time, so that the wood protection is optimally applied. A feed pulls the workpiece (length from 800mm) through the machine at 25m/min. For an extra charge, we offer you a suitable roller conveyor set. They can be firmly connected to the machine. In the outlet, disc rollers are used, which leave only barely visible traces on the back (the paint material used arrives). To make the purchase of your new brush machine a complete success for you, we offer the following services: � ...

Bread round and long-wred machine Kemper Superba used Kemper bread round-wire and bread-long-wifting machine for sale immediately in stock. -Band round wire 270cm long -with Kemper SUL

Powder mixing plant Ytron Dr. Karg, built in 2012 and with Flow tank. Capacity up to 10 to/h The powder was treated via pipes into the flow vessel. The whey or milk powder mixture was via the plate heater and hot water Cycle in batch operation with the basic tanks set and then released for further processing. With frame and staircase a.) With a GEA plate heater for treatment the powder water solution. Hersteler FA. GEA TDS GmbH, Sarstedt Type: VT 20 CD-9-C-16 170/7412 No. 3600 4074, year of construction 2012 b.) With wall-mounted control cabinet system Siemens S 7 for process technology, CIP tank system and Control of cleaning paths c.) With 1 CIP system for the standing tank as a 1-tank cleaning system for the Batch operation and for the powder mixing plant Self. Content CIP tanks 15,000 l insulated, deformed inwards in the upper area with valve no ...

year: 1991, modification controls and measuring technique 2004 no of tanks: 3 pcs (water, caustic, recovered water) material: s/steel heating: steam Consisting of: 1 x CIP-caustic tank content: 7.000 l, make: AMS 1 x CIP-hotwater tank content: 7.000l, make: AMS 1 x recovered water content: 4.000l, make: AMS - controls Siemens S7, new measuring technique 2004 - incl. all valves and pumps - incl. heat exchanger - incl. internal piping

A 7-stage GEA Wiegand evaporation plant with mechanical vapour compression, Made of V4A material with 2 identical high concentrators and one Vapour compression system for 2 Hoko systems. Capacity: 50,000 litres per hour Year of manufacture 2007 Product enema: 52,000 kg or 38,500 kg/h Concentrate: 12,240 kg or 18,900 kg/h for truck transport Steam consumption Low pressure steam : 300 kg/h with Live steam: 1,000 kg/h, when heating the system max. 2,300 kg/h further energy data can be found in the plant With a concentrate supply tank and with a complete cleaning system, location ground floor with complete tank piping to 2 x 50,000 l tanks and with complete control in Siemens S 7, as well as for the Entire electrical supply with 5 wall control cabinets for pneumatic cabling housed in 5 control cabinets, with various smaller frequency converters and 1 frequency con ...

Bread Sheaping Line

Vacuum homogenesia system Made Haagen & Rinau Type Unimix RU IV 200 Useful content 200lt Stirrer m. scraper 1500/300 UPM 3.7/4,4 KW Homogenizer 1500/300 UPM 2.0/2.4 KW Heating by steam double sheath, max 6bar

Kemper Becherwerk for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft dough space-saving design optionally 1 or 2 pieces of dough Crossband left-hand run / crossband right-hand-running

Pre-breaker with crusher Suitable for soft lime, marl, coal Power up to 200- 600 t/h Task size up to 1500mm Drive - electric transformer station 30kV/400V Drive power approx. 500 kVA Plant weight approx. 130 tons Task bunker 25m3 Chain conveyor Roller rust Schlagwalzenbecher Deduction tape Dust removal system Caterpillar suspension - not self-driving Conveyor belt 3 x 40m Telestack, self-driving, belt width 1200mm Immediately available

1. Screen changer "Kreyenborg" K-SWE 180 2. Water ring granulation "AGRIFON" 3. Classification sieve for the separation of Granules over-good and lower grain sizes Throughput: Depending on material mix , 500 kg/h

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

VELO flotation system PRI 100 for clarifying grape musts Capacity: 20.000l/h UNI-DEPP-KAR Manufacturer: VELO S.p.A. Type: PRI 100 Year of construction: 1998 Fabr.No. V6226 Capacity: 20.000l/h mobile with compressed air generator Measurements: Height: 2180 mm Length: 1500 mm Width: 1220 mm All the equipment s. photos

1 used Framax Tribloc bottle filler, built in 2012, consisting of Borelli 9-digit rinser and 8-digit low vacuum / gravity filler type CIAO-xp with 1-digit Arol Eagle C 26 mm crown corker. Plant last used for filling beer (bottle fermentation) in 61 mm diameter 330 ml as well as 71 mm diameter 500 ml glass bottles at an output of 1,920 bottles/hour. Filler also suitable for bottling wine.

1 of used Framax tribloc bottling machine, new 2012, consisting of a Borelli 9-head rinser / 8-head low-vacuum/gravity filler CIAO-xp with single-head Arol Eagle C 26 mm crowner, Last running bottle-conditioned beer at 1.920 bph with handling parts for 61 mm diameter 330 ml and 71 mm diameter 500 ml glass beer bottles. Filler also ideally suitable for bottling wine.

TECHNICAL DATA: Autoclave dimensions mm: 350 x 2000 Autoclave volume lt: 175 Installed electrical power KW: 55

Double pipe heat exchanger pipe heat transfer for biogas plant, sewage treatment plant sludge hygienization - used - Manufacturer AEL GmbH Leisnig Type Double pipe heat transfer W202 Fabr. No. 7.0637.940/29-56 Built in 1997 Permissible betieb pressure 6 bar Permissible operating temperature 90°C Content 1090 l Kerb weight 6510 kg Length approx. 11 m Width approx. 3 m Depth approx. 1.5 m

16 x 3.2MW 60Hz KAWASAKI Gas Turbine Power Plant Main specifications - Gas Turbine Model: M1T-23 x 16 sets - Maker: KAWASAKI - Power Output: 3,200kWe - Frequency & Voltage: 60Hz & 6600V - Year of Production: 2008 - Running Hours: about 60 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set This gas turbine plant has 16 x 3.3MW gas turbines with the optimal layout of 4 x 4 blocks and was initially installed as an emergency power supply in preparation for major disasters or large-scale power outages in the area. Fortunately, as there has been no serious emergency, this plant has had almost no operation, and the total running hours does not exceed 60 hours for each unit until today. However, as the plant has been regularly checked and well maintained, now the gas turbines units are in the best condition. This power plant is scheduled to be shut down in  ...

Big Bag filling station, filling and weighing system used The system consists of the following components: 1 filling hopper approx. 2300 height 2500 mm 2 stainless steel trough screws 1 tumbling/shaking sieve approx. 1200 height 1900 mm 1 BigBag filling station approx. 1950 x 2400 x 3700 mm 1 control cabinet The Big Pack filling is filled by wheel loader or forklift via a pouring funnel. The filling material is transported via a conveyor screw to a tumbling sieve. From there, transported with another screw to the actual weighing and filling station. The big bags lie on a vibrating floor when filling and are thus compacted.

5.5MW 60Hz KAWASAKI PUC60 ECOPLUS Gas Turbine Power Plant This is an eco-plus gas turbine power plant that has been being operated successfully for over 160,000 hours since it was manufactured in 2002 and installed. This plant has been regularly inspected and very well maintained according to the maintenance manual by the operating company. Now, the plant is scheduled to go for sale after stopping its commercial operation around June 2023. Main specification: - Gas Turbine Model: KAWASAKI PUC60 ECOPLUS - Maker: KAWASAKI - Power Output: 5,570kW - Frequency & Voltage: 60Hz & 3300V - Year of production: 2002 - Running Hours: 163,858 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

Many thanks for your interest in our machinery, please find below our offer: Manufacturer : Barth Type : NR 3000 batch roaster Year of made : 2000 Output /h approx. : between 800-1250 kg Nuts Consisting off : Plant components: - Hopper for nut roasting machine NR 3000 (650kg whole nuts), with scale - Nut roasting machine NR 3000 batch size 400-620kg/batch, roasting time 20-40min) - Roasted air conditioning - HWP cooling system - Cooling air supply - increased stand frame - aspiration device stand frame - aspiration device cooling zone - thermal exhaust gas cleaning system TNV 8000 (8000m³/h, residual content in the clean gas 50mg/C/m³) - Exhaust pipe TNV - free-standing 2-way steel chimney system (height 21500mm, outside diameter 1450mm, 2 pcs. Stainless steel inner pipes 500mm) with thermal insulation - Fully automatic control unit As well as all pipes, p ...

see pdf attached

New machine Stainless steel model 24-month warranty Properties: + TOP value for money + Solid cone round wire in stainless steel version + with control panel and automatic flour spreader + Model "S", suitable for small dough pieces (approx. 100 - 350 gr) + optimally suited for wheat dough up to a TA of approx. 170 (depending on the dough) + extra long rounding/running distance of 6 meters for best round ingestion properties + gutters and cones are teflon-coated + Base is mobile and also available in stainless steel + mounted on robust rollers with fixed SPECIAL equipment (not retrofittable!): - Blower / ventilation of the gutters and cone (recommended for dough with TA > 155): + EUR 1,745,-- Technical data: Weight range: 100 - 350 grams (dough/product dependent) Hourly output: approx. 1,800 pieces (dough/product dependent) Orbit: 6 meters Dimensions: 105 x 105  ...

New machine Stainless steel model 24-month warranty Properties: + TOP value for money + Solid cone round wire in stainless steel version + with control panel and automatic flour spreader + suitable for medium-sized dough pieces (approx. 300 - 1,100 gr) + optimally suited for wheat dough up to a TA of approx. 170 (depending on the dough) + extra long rounding/running distance of 6 meters for best round ingestion properties + gutters and cones are teflon-coated + Base is mobile and also available in stainless steel + mounted on robust rollers with fixed SPECIAL equipment (not retrofittable!): - Blower / ventilation of the gutters and cone (recommended for dough with TA > 155): + EUR 1,745,-- Technical data: Weight range: 300 - 1100 grams (dough/product dependent) Hourly output: approx. 1,800 pieces (dough/product dependent) Orbit: 6 meters Dimensions: 105 x 105 x ...

7.2MW diesel power plant. This vintage power plant has been used as an emergency generating sets for a larger R&D center in Korea, a very short actual running hours (abt. 2000~3000hrs) and has been well maintained, so our company can confidently recommend this power plant to anyone who needs it. The plant was dismantled and has been now stored in our factory and will be delivered to the buyer after the performance verification test of the generating sets at our test shop. Main Specifications - Engine Model: SSANGYONG-MAN 18V28/32H x 2 Sets - Manufactured & Running Hours: in 1999 & abt. 2000~3000hrs - Continuous Output: 3600kW x 720 rpm - Frequency & Voltage: 60Hz & 6600V - Fuel Oil: Diesel Oil / Heavy Fuel Oil - Plant Auxiliary Equipment: 1 set

Fat baking device Esback Köhler 661 101 -Fat baking device with fermentation cabinet -with 1 tipping plank trolley and 10 tipping boards -optional with 2 tipping plank trolleys and 20 tipping boards -380 Volt 50Hz -Fat tubs inner mass: 72x63cm

Manufacturer: NERAK Type: WB 370 Built in 2003 CC-foot 2160 mm CC-Vertical 9600 mm CC head 3110 mm Plastic cup approx. 36 cm wide 20 cm deep approx. 10 cups per m Rubber block chain Speed: 0.3 m/s Power 5-10 m3/h (bulk density 0.5-1.0 t/m3) User manual and technical drawings available

Impression work - Numbering ink to number for Heidelberger Speedmaster SM52 - Printmaster PM52 - very well maintained and little used - Built: 2002 - Colour box with colour rollers - Numbering wave - with 2 seat rings - with 2 - switching arms - with 10 numbering works

- brand new - 20,000 litres steel tank - storage tank - diesel tank according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight approx. 4.2 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue. (On request, other RAL col ...

Hull engine in replacement Scania DC13-071A without turbo,EGR cooler+hoses,PDE's,controlr installed in Kleemann crushing plants. Price only on request

according to description pdf

Used grease baking system REIMELT, -In the bakery condition- - 6 rows - Injection stations - approx. 36kW

Compounder with segmented screw elements, cylinder with a degassing opening with hot tee, stainless steel housing, swivel

Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change

According to description pdf attached complete line for profiles + WPC profiles

-Fat baking device from Esback -with fermentation cabinet -with tipping plank trolley incl. 10 tipping boards -with 2 screen carriers incl. manual turn -380 volts

Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 (2 ...

Combined heat and power plant with Ford gas engine 12 kW electric complete with heat release and sound insulation hood B&R Control Water-cooled asynchronous generator

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

static on steel frame 2 units arranged on top of each other

Screws: 2x x 58 mm / 26D Engine: 250 kW DC Capacity: approx. 800 - 1000 KG Material: PE, PP, PS, ABS // Details: DC motor, concurrent, segmented screws and cylinders (2x x 58 mm / 26D), screw speed: max. 900 rpm, degassing, vacuum pump, BKG underwater pelletizing system OPTI-LINE 1 consisting of: Kreyenborg start-up, water box, cutting head, water circulation system, heat exchanger, process water tank, centrifugal Control: Siemens S7 with visualization

We offer a used Tetra Pak® A3 Flex 300V 1000ml Edge filling line in exceptional condition. Line components: -A3/ Flex 0300V aseptic filling machine. Format 1000ml Edge -Accumulator Harness Helix 50 m -Lid Capper Tetra Pak Capper 25 -Cardboard packer Tetra Pak CBP32 -Conveyors Highlights: – Excellent condition – Year of Make 2010 – Immediately available ex-factory UGM Germany The line includes the following components: FILLING MACHINE: Model: A3/Flex Year of make: 2010 Format: Edge Capacity: 7000 pph Volume: 1000 ml Working hours: 31843 ACCUMULATOR: Manufacturer: Hartness International Model: ACHX30-0700-50m Year of make: 2014 CAPPING MACHINE: Make: Tetra Pak Model: Lid Cap 25 Year of make: 2011 CARDBOARD PACKER: Make: Tetra Pak Version: 0400 Model: CBP32 Year of Make: 2010 CONVEYOR SYSTEM: Tetra Pak®

Used filling line for glass bottles, capacity 0.33 - 1 l. Line description: - 4XP25 packing machine with the following parameters: - stepless adjustment range - 3500- 8200 b / h, and 5300-12300 b / h - maximum capacity for sparkling water with 6g / l CO2 and temperature 235oK / 11500 g / h for bottles. 0.33l; 5000 g / h for the cylinder 1.0l / - installed power - 2.2 kW 380 V - CO2 consumption - 40 kg / h - pressure of CO2 or sterile air in the tank higher than the fluid pressure by 0.150 MPa - air consumption - approx. 13 m2 / h - air pressure - 0.5 MPa - number of nozzles - 36 pcs. - number of closing heads - 8 pcs. - noize - 90 dB / A - overall dimensions: width - 2895 mm; length - 2125 mm; max height - 2530 mm; curb weight - 5100 kg - service - 1 person

Power: 105 kW Mains voltage: 400 V Frequency: 50 Hz Speed: 1500 rpm Generator: Marelli MJB 250 MA4, 165 kVA Engine hours: Approx. 60000 Turbocharger is new, generator was renewed in 2019 As a replacement unit, the unit has a water damage: Liebherr DITOM TBG 926 Built: 1999 Subject to prior sale - Errors possible

CUP LABELING / LABELER BLINK RM 50 (FOUR OR TWO CUP / SIDE AND GROUND) M. No.: 950136 Voltage: 380 V // 50 Hz // 6A

3000 cans / h

We sell several 20 foot office and stay containers of different designs at reasonable prices. There are single containers, double containers, triple containers and quadruple containers. The containers are partly equipped with office furniture or cabinets. The location of the containers is Belgium. But we can organise mining and transport. Basic dimensions of the container length approx. 6055 mm, width approx. 2435 mm, height approx. 2350 mm. Price from 1500,- € + VAT depending on the number of units and execution.

TETRA PAK A3 COMPACT FLEX 250ML AND 200ML PRISMA FILLING LINE Item #: Usm-131 Category Tetra Pak A3 CF/Flex A3 Compact Flex 200ml and 250ml Prisma Filling Line with quick Change kit. Year of manufacturing for the full line is 2016 and few working hours, just like new 1-A3 Compact Flex 200ml and 250ml Prisma Filling machine, Speed 9000 Packs per hour 2-Date Printer 3-Helix Accumulator 30 meter 4-Straw applicator TSA 30 5-Shrink 30 6-Conveyors and Paper Trolly

THE CLASSIC DOUGHNUT FRYER Consistently high quality doughnuts due to soft turning device frying platform for 36 pieces; productivity per hour: 360 pcs.; manual lifting device; manual turn; temperature controller with temperature indication; dimensions: 1010x1120x820 mm; power: approx. 6.8 kW

Line for pouring water or other liquids in 2 L packages The line consists of: - PET bottle blower from Sidel SBO 4 - the feeding tunnel of the bottles of own production - Pourer Nagema BF-60 with bottle screwdriver 12 head - Nagema saturator type KOMI - Spomasz label - bottle packer with control cabinet - electric welding furnace + fan for cooling the welding machine - Pragometal pallet wrapper Used machines, for technical inspection It is possible to contact the buyer with the company performing inspections and relocation of machines.