waste used for sale

As per the title, I am selling a 2011 Semi-Automatic Shrink Wrap with Tunnel Oven, the machine is an ITALDIBIPACK in good condition and regularly maintained. Selling due to lack of use. MORE INFORMATION Timed welding. Separate electronic control of the temperature of the sealing bars. Product length control via photocells with horizontal or vertical reading. Motorized loading/unloading belts. Motorized waste recovery. Film dragging with chain. Equipped with approachable belts for packaging small products. Car on wheels. Tunnel on request Heat-sealing and possibly heat-shrinking monofolded polyolefin films (GREEN FILM – GOLDEN FILM). Machine built to CE standards DATA SHEET TECHNICAL FEATURES MECPACK STX Supply voltage: 240/380 V 3 Ph + N + T Installed power: 1.5 KW Overall dimensions L x W x H: 1800 x 980 x 1450 mm Worktop height: 780 mm Tunnel mouth size ...

Its welding/shrinking combinations are ideal for medium production quantities (max. 200 - 500 packages per hour). The machines operate with a shrink hood instead of a tunnel. The hood is closed by a locking electromagnet during film welding and heat shrink wrapping operations. Almost all products can be shrink wrapped with this intelligent machine. AUDIONPACK machines have, thanks to precise temperature control, better weld quality and longer wire life than most similar machines in this market segment. Simultaneous welding and heat-shrinking of the film under a transparent hood Magnetic locking device: automatic reopening of the hood Automatic ejection of the product by motorized belt Adjustable welding temperature; microprocessor controlled automatic weld timer (to prevent overheating) Cooled by liquid cooling system PTFE coated welding knife Adjustable film perforation unit ...

Automatic complete machine with shrink wrapping tunnel Automatic machine for packaging in thermal foil. It closes the package on 4 sides. The machine is operational, works in continuous mode. The input tray picks up and advances the item into the sealing chamber. It seals the film, cuts it off, removes excess film with the use of a side system for collecting waste. Then the internal feeder moves the item into the heating tunnel to shrink the film. Machine Parameters: - FAI PACK CS9700 packaging machine - FAI PACK FR30FT heating tunnel - Dimensions of packed items - knife length (930mm) package up to 650mm - width up to 500 mm - height up to 250-280 mm - Year of manufacture 2000

Onion peeling machine from the Dutch company DOFRA. For sale two such machines. - The efficiency of one machine is from 50 to 70 onions per minute, which gives an average of about 360 kg of peeled onions per hour (i.e. 60 pcs x 0,1 kg= 6 kg/min x 60min=360 kg/h). This efficiency is tested and confirmed (with one person stacking and one person controlling the final peeling stage). -has a hopper - belt with takers - the onion is taken from the charging basket, from which it is transported by a belt conveyor to the peeling section. - The cutting mechanism of the peeler also cuts the outer scales of the onion for easy removal. The depth of the incision can be adjusted to peel one or more scales. From the peeling section, the onions go to the rotary grippers, which, with the help of an air stream and with the help of the rotary motion of the grippers, get rid of the onion husks. -  ...

ABL brand machine, model GTF WM. The watermelon line WML5 can be used to process watermelons. With the WML5 line, the watermelons are placed manually on a loading station that advances to the cutting station. The selected watermelons are pushed to a system that cuts the fruit into large slices (thickness to be determined). They are then picked up manually one by one by an operator and positioned on special shuttles. During transport inside the machine, the slices are selected according to their diameter by a special system. Determined by the size, a pick & place device removes them by placing them on the corresponding cutting unit and the diameter of the story producing cubes. The cubes and external waste are transported and separated on two underlying belts for further processing. The machine allows loading (manual and continuous) at a capacity of 4 - 5 fruits per minute. The machine c ...

Pressing force 300 kN (30 t) Tools A, B, C, D Number of stations in the turret 6 (size D) Number of rotary stations 3 Max. number of tools 60 of which rotary - continuously 360° 30 Maximum punch diameter (size D )– separate 81 mm Maximum punch diameter in XMTE4M magazine 4 x 31.7 mm Maximum punch diameter in XMTE6M magazine 6 x 24.0 mm Maximum punch diameter in XMTE10M magazine 2 x 24.8 x 12.7 mm Working range in Y axis (with Multitool) 1300 mm Working range in the Y axis (single tool) 1250 mm Working range in the X axis (with Multitool) 2550 mm Numerically controlled stroke depth 0.1 – 31 mm Automatic repositioning of clamps in the X axis up to 10,000 mm Max. positioning speed in axis Y+X 80 m/min. Axis acceleration 10 m/sec² Number of strokes – ( step 1.0mm ) 1000/min USB port 6 Weight 7800 kg Max. jaw opening 11 mm Max. stroke 31 mm Power supply 3 x 400 V/50 Hz Machine power 8 ...

The machine is in good technical condition, it is possible to test it by agreement. Type P 2000 adapted to a removable grate and waste tub. The original machine had an inadequate water bath. The removal of flue gas is therefore via additional extraction. A simple and functional machine for locksmiths. The machine including the Alfa In Pegas 101 CNC aggregate, the control PC (where there is a sheetcam program for creating tool paths), a set of consumables for the machine torch. The PC has a monitor, keyboard and mouse. Tables for burning different material thicknesses have been tested on the PC. It is possible to burn steel, aluminum and stainless steel from a thickness of 0.5-20 mm. Working area: 1000x2000mm Active wasps Z Control software: Mach3 X/Y/Z guide: HIWIN HGR20 Drive: Nema23 stepper motors - 2.8Nm Maximum speed: 12000mm/min Construction: Solid welded Dimensions: 1600x2400x1000m ...

5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED

Perfect binder Make Bourg Model BB2000 Year 2002 Max book size 450 mm Min-Max thickness 2-60 mm Cycles up to 250 Details waste suction, grinding station, single glue roll application, cover clamp Available direct

Steam trap, ball float, steam trap ARI Cona, ball float steam waste -Manufacturer: ARI, float steam trap with flanges -Type: CNU R4 -Connection: DN50 PN16 -Dimension: 275/230/H365 mm -Weight: 23.2 kg/pc.

A used and fully functional joinery machine of the HUNDEGGER type. K2i 625 - 5 axes, built in 2009, with the entire waste discharge technology under the joinery system (3 conveyor belts) EKP control, machine maintained. Facility immediately available, Location Germany, sale as visited.

SECOND-HAND COPYING BAND SAW MZ MOD. UNIVERSAL 013 - CE RULES - motor Hp 7,5 - wheel diam. 840 mm. - copying device - max cutting length 1300 mm - max cutting height 100 mm - cutting angle +- 45° - waste conveyor belt SMA - SN 08 - year 2002

SECOND-HAND SEMIAUTOMATIC CROSS CUTTING SAW TRV 500 - CE RULES - mobile pressure system - right/left feeding - conveyor belt TSLR 6000X400 - n. 3 unloading tables mm. 1000x1200 - waste belt conveyor TSS 45° mm. 2500 - strapping machine SIVARON SS-80 - year 1997

Used equipment for the treatment and the preparation of water It is a reverse osmosis that produces a filling water called TABLE WATER Manufacturer UAT UNIVERSAL AQUA TECHNOLOGIES INC USA Model TP 110K Year of production 2001 Capacity 12 000 L h Operating hours 9 810 Volts 380 Hz 50 Ph 3 Description of equipment MM FILTER INPUT WATER TREATMENT REVERSED OSMOSIS UAT UNIVERSAL AQUA TECHNOLOGIES INC USA 2001 DEMINERALIZED WATER TANK 12 m3 PUMPING BLOCK FOR MINERALIZATION MINERALIZER MINERALIZED WATER TANK PUMPING BLOCK FOR WATER DISINFECTION AND DELIVERY TO FILLERS Technological description of table water production a General The plant for the production of table water has a capacity of 12 000 l h It consists of Sand filter Device for reverse osmosis TP 110K Product water tank Pump for mineralization of product water Mineralizer Mineralized water tank System for ozonation disinfection of min ...

Key data: 980 mm, 980 mm

Working space LxWxH: 750 x 980 x 980 mm Door opening LxW: 640 x 740 mm Equipped with: - New work gloves - Blast gun - Waste plant Country of origin: Netherlands Connection: 380 Volt Machine LxWxH: 1000 x 1000 x 2000 mm Machine weight: 400 kg

We offer: Chiller Air-cooled chiller Climaserv GFC-F 260 ST 260 kW Cooling capacity in container outdoor standing on the roof The machine was used to cool the liquid circuit of the waste heat generated in the wallpaper production plant during the printing process. The system comes from a vinyl structure wallpaper manufacturer. The buyer is responsible for the dismantling, loading and transport from the specified location in the hall of the purchased machine. Costs: approx. 2500 € net.. Offer is outdated. Specifications Basic: Manufacturer: Geoclima S.r.l. Type: Climaserv GFC-F 260 ST Type of installation: Container on roof in the open air Series: CS 9010 Year of construction: 06/1999 Power consumption:101,5kW Rated Current:162.5A Starting Current:301A Max.Operating Current:225.5A Operating Current: 400V/50Hz/3~/PE Control current: 230-24V/50Hz/1~/PE Metric ...

This MIKRON Multistar CX 24 Rotary Transfer Machine was manufactured in the year 2003 in Switzerland. It excels in accurately producing part families and intricate workpieces in large quantities. Its table index offers exceptional repeatability of ± 2.5 µm. With 24 stations equipped with up to 44 machining units, it ensures incredibly high output rates. This Rotary Transfer Machine located in Germany comes with loading station (brass D= 3.9mm), unloading station, part selector (8 compartment, see picture), lateral drilling unit, rotating straightener (October 2023 completely new in stock), feed / sawing unit (control and inverter overhauled in 2021), pneumatic loading (via feed pipe), chip conveyor with waste water pump, KNOLL coolant system (2,000 liters) with drum screen filter, flushing pump and vacuum pump including low-pressure pump (5 bar) and high-pressure pump (60 bar). Tai ...

Single-station machine for containers up to 1.5 ltr. Extruder 60/20D with DC motor and Hitachi frequency converter. Double head 100 mm stitch with WDS. Cold separation. Waste punch, old pneumatic valves replaced by Festo valves. No oil or air leaks. Good condition, immediately free

Holtrop Jansma-AFS clean air extraction with compressed air cleaning, auger discharge, rotary lock, chip fan, return air with summer/winter gate valve and fire protection device Type: OSFS 185 Year of construction: 2005 (2015 new turnstile and new control system) Clean air extraction Suction supports: ø700 mm + ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (onderbak 2,700 mm + bovenbak 2,700 mm + 800 mm fans) Capacity: 21,000 m3 /hour Chip fans: 2 15 kW, 380V, 56 Amp, 10,500 m3/uur, 3,000 tpm, 3,850 Pa, Type: RL E 550130 Filter surface: 185 m2 Filter tubes: 150 stuks Length of filter tubes: 2,200 mm Diameter of filter tubes: 180 mm Cleaning: Compressed air cleaning Flame protection: Sprinkler installation with fire brigade connection Screw: HJ STH-380 12 tpm Turnlock: HJ ZRS-300, 31 tpm Hopper dimensions: 250350 mm Transport fan: Connection diamet ...

BBA BA100K D193, This diesel-driven 4 waste water pump is the best performing mobile pump set in its class. With a dirt passage of 82 mm, the chance of blockage is zero, even on the most polluted sewer jobs., The economical 1-cylinder Hatz diesel engine with DriveOn® technology guarantees minimal fuel consumption and long maintenance intervals., , Maximum 135 m3/h and head up to 17 mwk, Dirt passage 82 mm, , Can be supplied with any desired coupling/connection., , Throughput capacity: 135 m3/h, Max dirt passage: 82 mm, Motor brand: Hatz, Max. head: 17 MWK, Max dirt passag: 1500 rpm, Weight: 1300 kg, , = More information =, , General information, Year of manufacture: 2014, Applicable material: Water, , Weights, Empty weight: 1.300 kg, , Functional, Connector size: 4 Cardan, Cargo space capacity: 2.250 l, Quick coupler system: Yes, , Condition, Technical condition: good, Visual appearance ...

THREE KNIFE TRIMMER ZECHINI MODEL FIORINO -Year 2001 -Max trimmed size 380x330 mms.- Min size 170x120 mms. -Max thickness 50 mms., Min. 5 mms. -Electric power: 5 KW, Speed max 750 copies/hour -Total dimension : 2000x800x1650 mms., Weight : 800 Kgs. -Waste container capacity: 240 liters -Full automatic size change -Complete with in-feed system Zechini RAMPA Year 2001

Used Kosme Filling Monoblock Completely Refurbished in 2016 Introduction to the Kosme Monoblock The Kosme filler a filling monoblock with a 24 24 6 configuration for carbonated and still water stands out for its reliability and high performance capabilities Additionally this machine refurbished completely in 2016 and unused since then ensures optimal working condition Performance and Operational Capacity of the Used filling monoblock Kosme completely refurbished in 2016 This monoblock s operational capacity is remarkable it produces 9000 pieces per hour for 330 ml bottles demonstrating its versatility in handling various bottle sizes ranging from 50 mm to 105 mm in diameter and from 150 mm to 350 mm in height Technical Features of the Monoblock Among its key features the presence of an aluminum cap and an effective rinsing system are noteworthy Furthermore the monoblock comes equipped wi ...

BBA BA100K D193, This diesel-driven 4 waste water pump is the best performing mobile pump set in its class. With a dirt passage of 82 mm, the chance of blockage is zero, even on the most polluted sewer jobs., The economical 1-cylinder Hatz diesel engine with DriveOn® technology guarantees minimal fuel consumption and long maintenance intervals., , Maximum 135 m3/h and head up to 17 mwk, Dirt passage 82 mm, , Can be supplied with any desired coupling/connection., , Throughput capacity: 135 m3/h, Max dirt passage: 82 mm, Motor brand: Hatz, Max. head: 17 MWK, Max dirt passag: 1500 rpm, Weight: 1300 kg, , = More information =, , General information, Year of manufacture: 2017, Applicable material: Water, , Weights, Empty weight: 1.300 kg, , Functional, Connector size: 4 Cardan, Cargo space capacity: 2.250 l, Quick coupler system: Yes, , Condition, Technical condition: good, Visual appearance ...

Description: Max. panel width 3200 mm Max. panel length 1200 mm No of Bottom Units 6 No of Top Units 4 Lateral horizontal groups , Automatic waste ejection system TOOLS NOT INCLUDED Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

For slicing of cabage, lettuce, leafy vegetable, etc. this extra information is standard for this model. Please always double-check the details during a visit The Eillert G1500 Vegetable and Fruit Cutting, Washing, and Blanching Machine, introduced in 2014, represents a pinnacle of innovation in food processing technology. This model integrates cutting, washing, and blanching functions, offering a comprehensive solution for commercial food production. With advanced cutting mechanisms, the G1500 excels in slicing vegetables and fruits with precision and consistency, minimizing waste and optimizing yield. Its robust washing system ensures thorough cleaning, removing contaminants and impurities to uphold the highest food safety standards. The blanching capability of the G1500 rapidly heats produce, effectively deactivating enzymes to preserve color, flavor, and nutritional integ ...

Iseki ZM 160 S, intermediate axle mower (belonging to carrier vehicle unknown), built in 2002, incl. accessories shown: discharge plate, lifting shears, lifting cylinder with lifting shaft and lifting arms. More mowers and grass pick-up technology available! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...

Cleaning roll holder, floor stand, cleaning cloth roll holder -Manufacturer: Tork, floor stand for cleaning cloth roll with waste stand -Type: W1 -Roll width: up to approx. 450 mm -Number: 7x cleaning roll holder available -Price per piece -Dimensions: 710/590/H1010 mm -Weight: 8.1 kg/piece

Description: To participate in the auction, a deposit of €6,000.00 is required. The deposit does not constitute an advance on the balance of the winning price. The winning bidder-buyer must reimburse Surplex for supervision costs of €300.00 per day. Request information for deposit payment. Single lot composed of warehouse remains, site cleaning included at the buyer's expense. Please carefully read the procedures outlined in the description and adhere to them, as participation in the auction implies full acceptance. The removal of lots must take place within 45 days from the communication of final award, and the following operations are mandatory: 1. Complete removal and proper disposal of FERROUS materials, 2. Full floor cleaning of the shed, 3. Complete removal and proper disposal of NON-FERROUS materials, 4. The collection and proper management of any ordinary, special, haza ...

Albamat 550 V5 cardboard press with EKZ 1400 shredder RA2285 Type: Albamat 500 V5 / EKZ 1400 Year of manufacture: 2019 Condition: used Optical: traces of use Height: Press: 4450 mm without housing, 5550 mm with housing Width press: 2350 mm Depth press: 5613 mm Pressure: 60t / 600 kN Recommended maximum carton size: 960 x 630 x 420 mm. Depending on the housing, longer cartons are also possible Shredder feed opening 1435 x 990 mm Motor power: 22 kW baler, 1.1 & 7.5 kW shredder. Bale size: 1050 x730 x 1200 mm (depending on filling) Cycle time: 25 s, 3.3 t/h at 35 kg/m³ Dead weight: 8500 kg baler + 1000 kg shredder + feed hopper Start of baling process: Photocell Bale tying: 5 x 3.1-3.8 mm wire, fully automatic including: Oil cooler and oil heater for outside temperatures Free pusher Feed belt control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, German ...

Description: Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L Connection voltage 230 V Battery 24V / 100Ah Brush diameter 510 mm Speed 175 rpm Suction power air 24 L / s Tank volume 50 / 50 liters Weight 160kg Dimensions L-W-H 1.1 x 0.52 x 1.0 m weight approx.: 160 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 520 x 1,000 mm

Clamping unit Clamping force350 ton Opening stroke675 mm Distance between tie bars630 x 630 mm Mould height min.330 mm Mould height max.710 mm Platen size (h x v)950 x950 mm Injection unit Screw diameter70 mm Injection volume1212 cm³ Shot weight1090 g Injection pressure1877 bar Measurements and weight Dimensions6,5 x 1,9 x 2,2 m Machine weight 16000 kg this extra information is standard for this model. Please always double-check the details during a visit The DEMAG Ergotech System 3500-2300 NC4 Injection Molding Machine, introduced in 2002, exemplifies precision and efficiency in plastic molding technology. Renowned for its advanced features and superior performance, this model has become a cornerstone in the injection molding industry. At its core, the Ergotech System 3500-2300 NC4 excels in injection molding operations with unparalleled accuracy and speed. ...

Combitrailer / mowing container for mowing / mulching while simultaneously picking up grass, leaves, undergrowth, horse droppings, etc. Heavy, robust design: combination of tipper chassis and flail mower in front with height-adjustable trailing roller, working tools blade flail, working width 1.80 m, container volume 11 m³, hydr. High emptying as well as floor emptying possible by means of rear wall swing flap. Hydraulically height-adjustable traction device, with overrun brake. PTO drive 540 rpm, power requirement min. 44.4 kw/60 hp. Other combi trailers with working widths of 130 and 150 cm, also machines from other manufacturers available - ask us! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, envir ...

manufacturer: GMM model: INTEC I 713 G-2 Year of construction: 2021 condition: as good as new (used) Operating hours: 450 h Repeat accuracy: 1 mm Working range: 4,500 mm Traverse path X-axis: 4,200 mm Traverse path Y-axis: 1,500 mm Z-axis travel: 200 mm Positioning accuracy: 1 mm Workpiece weight (max.): 2,000 kg Type of input current: three-phase Motor power: 35.000 W Input voltage: 380 V Aluminium sheet thickness (max.):120 mm Table length: 4,200 mm Table width: 2,500 mm Tank capacity: 5.000 l Pressure 4.55 bar Positioning speed: 102 mm/min Rapid traverse X-axis: 12,500 mm/min Rapid traverse Y-axis: 12,500 mm/min Rapid traverse Z-axis: 2,000 mm/min Table height: 860 mm Operating pressure: 4,550 bar Input current: 60 A Table load: 2,000 kg Accuracy travel dimension: 1 mm Year of last overhaul: 2024 Total height: 3,500 cm Total length: 5,800 cm Overall w ...

Key data: 4000 mm, 1300 mm, 270 mm

SPECIFICATIONS: Working Area X: 4000 Working range Y: 1300 Working range Z: 270 C-axis Tool changing stations: 24 Copy milling unit Refrigeration unit Double-sided drilling unit for drilling locks Main motor power KW: 11 Work table: 8 controlled rails Waste conveyors Xilog Plus PC Software Control Vacuum pump capacity m³/h: 250 Protective Weight approx. kg: 5000

SPECIFICATIONS: Equipment: Motorized loading roller conveyor Motorized roller stroke Slide arm with 7 pneumatic grippers Panel saw with a cutting width of 4500 mm Door pad on felt-covered platforms Sliding arm with 8 pneumatic grippers, connected by a continuous rod Lateral alignment device Panel saw width 2500 mm Vibrating chute for picking up and removing waste Shredder WEIMA model WLH300, built in 2007, motor 18.5 kW Unloading gantry 3ERRE AUTOMAZIONI model 1131, built in 2007 - length approx. 13000 mm Pneumatically operated mechanical gripping unit Motorized roller conveyor width 1700 mm length 4000 mm Side stop with idle rollers, side aligner, retractable front stop Motorized roller conveyor, width 1600 mm, length 5000 mm, concealed front stop 2 motorized floor roller conveyors, width 1600 mm, length 5000 mm 4 floor roller conveyors, width 900 mm, length 5000 mm ...

Description: serial number: AL5830 Technical specifications: vertical milling motor 7,5kW, ISO30, 1500/18000 rpm (ref SCM: 2936230020L) drilling head with 22 vertical spindles and 3+1 horizontal spindles (with 2 outputs), drilling motor 4kW, 4000 rpm vertical groove saw magazine HSK 11 positions 8 bridges L=1700 mm, with 28 suction cups 4 loading aids vacuum pump Becker, 250 m³/h working table 4400 x 1500 mm axis travel: X=4900mm Y=1800mm Z=280mm X=3600 mm Y=1550 mm waste disposal belt total connection 33 kW CE mark vacuum pump: 250 m³/h, serial number: AL5830, toolchanger positions: 11, total electrical load: 33 kW, Number of vacuum pumps: 1 pieces, x-motion: 4,900 mm, y-motion: 1,800 mm, z-motion: 280 mm, Approx. Onsite Dimension. (l x w x h): 8,700 x 4,900 x 2,900 mm, weight approx.: 6,000 kg

Description: serial number: 0-201-06-0390 Technical specifications: 3 axes + axe 'C' vertical milling motor 7,5kW, HSK F63 drilling head with 11(X) + 6(Y) vertical spindles and 4 horizontal spindles (2 on X axis and 2 on Y axis) tools magazine HSK - 30 positions 8 bridges L=1340 mm, with 16 suction cups 4 pneumatical clamps for fixing narrow pieces 4 loading aids vacuum pump Becker 100 m³/h + vacuum pump 2BL2101 (80m³/h) working table: 4000 x 1300 mm axis travel: X=4900mm Y=1800mm Z=280mm waste disposal belt security belt in front of the machine (3 parts) perimetral protective fence total connection: 17 kW software: woodWOP NC control: power control PC85 CE mark without tools vacuum pump: 100 m³/h, serial number: 0-201-06-0390, toolchanger positions: 30, total electrical load: 17 kW, 5-axis machining: No, Number of vacuum pumps: 2 pieces, Integrated C-axis:  ...

Description: ATTENTION! In order to participate in the auction, a deposit of €10.000,00 is required to be paid and it will be retained from the winning parties upon the outcome of the adversarial verification of the state of the sites and the prior filing of DURC, chamber of commerce certificate and civil liability policy. The deposit is to be paid by bank transfer to the bank account in the name of Surplex Srl. For further information contact simone.clini@surplex.com The removal of lots must take place no later than 30 June 2024 and the following operations are mandatory: Cleaning of the pits, management of residual liquids and their washing. Total removal and proper disposal of FERROUS materials. The complete floor cleaning of the respective area Access to the warehouse will be allowed only after the delivery of all necessary documentation for site safety, according to curre ...

This TRUMPF trulaser 3030 laser cutting machine was manufactured in 2007. It offers a consistent laser power of 3200 W with the ability to handle cutting thicknesses up to 20 mm for steel, and includes efficient waste transportation. The working area spans dimensions of 3000 mm in the X-axis, 1500 mm in the Y-axis, and 115 mm in the Z-axis. The machine also features two interchangeable tables and an additional rotary head for tubes and profiles. For more information about this TRUMPF Trulaser 3030, please reach out to us.

3,600 cbm/h Stacker With Tripper Car immediately available for re-location from SE-European mine; machine is still powered and can be tested as needed medium-size stacker for rail based stock yard use, to be flexibly used to stack loose soil, sand, waste, coal etc. boom length: 30 m; slewing angle: +/- 105 degree; boom luffing above ground: 2.0 to 13.3 m spreader on rails, luffing and slew able boom; incl. tripper car for a 1,400 mm belt at 5 m/s speed; boom conveyor drive and slew drive: electro mechanical; Boom Luffing: Winch; Total operating weight: approx. 280 + 65 t

Description: • Wood chipper, wood waste shredding machine, wood shredder • Serial number 500-5944 • Main motor power 18.50 KW • Rotor length 600 mm • Rotor diameter 256 mm • Rotor rotation speed approx. 90 rpm • Hopper volume approx. 430 liters • Dimensions of the hopper loading opening approx. , 800 x 600 mm Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 2,600 mm, weight approx.: 1,500 kg

Description: Output: max. 3,150 m³/h Negative air pressure: max. 2,250 PA Voltage: 3 x 400 V Motor power: 3 kW Waste container volume: 72 l Compressed air consumption: 73 Nm³/h Suction nozzle: 1 x 160 mm / 1 x 200 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 1,100 x 2,700 mm, weight approx.: 260 kg

A complete line for peeling and washing leeks, Turning system with conveyor - transporting leeks to the peeling machine. Peeling and washing machine - the key element of the line. First and second conveyors - located above the peeling table. Round sorting table - with rinsing system. Leeks are sorted into different grades here. Control counting system - on the peeling table, counts leeks per person, for up to 15 people. Waste removal system - with a dirt removal system under the washing line Spray system - equipped with guns, spray and spiral roller. Self-priming pump - for dirty water. Additional equipment - all necessary parts, electrical box, float sensors, PVC pipe system and connectors for connecting the pump.

new CNC Nestingmachine, Brand: INFOTEC Type: 4621 EVO GO Technical data: Working range X axis: 2150 mm working range Y axis: 4600 mm Working range Z axis: 250 mm X / Y axes speed: 60 m/min Z axis speed: 12m/min Drill head grid 32 12 vertical spindles 8 horizontal spindles 1,7 kW System INFOTEC - EVO GO Automation of horizontal drilling in 18 mm panels (patent pending) Lateral drilling zone (requires drilling unit 12/8/2 LL) - Special unit for the C axis, which allows the transfer of the cut workpieces to the drilling zone. Can be rotated 0-90 degrees. (C-axis required) Optional: - Extension of the working area in the Y-axis up to 4600 mm. (Total length of the machine set with unloading table for EVO GO is: 9100mm). - Lateral drilling range: X: 2150 mm, Y:1300 mm Dimensions of side drilling elements: - 1600 x 600 x 18 mm - maximum, - 500 x 80 x 18 m ...

SLIDE   total force (nominal): 880 to   stroke: 305 mm   cutting velocity min.: 5 mm/s   cutting velocity max.: 70 mm/s   closing velocity: 200 mm/s   returning velocity: 200 mm/s V-RING   nominal force: 400 to   stroke: 40 mm COUNTER RAM   nominal force: 200 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 1010 mm   lower table (front-back): 1600 mm   upper table (left-right): 1000 mm   upper table (front-back): 1000 mm   shut height max.: 460 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 450 mm   sheet thickness max.: 16 mm   feeding step min.: 1 mm   feeding step max.: 999.9 mm   sheet length min: 3950 mm   speed max.: 48 m/min  &nbs ...

CONTROLS   PLC SIEMENS S5 SLIDE   total force (nominal): 160 to   stroke: 60 mm COUNTER RAM   nominal force: 80 to V-RING   nominal force: 80 to TOOL DIMENSIONS   lower table (left-right): 560 mm   lower table (front-back): 600 mm   upper table (left-right): 560 mm   upper table (front-back): 600 mm   shut height max.: 335 mm   ram adjustment: 125 mm   distance between columns (H-frame): 630 mm   passline opening (free passage in side columns): 270 mm CROP SHEAR   cutting force: 150 kN DIMENSIONS / WEIGHTS   total weight approx.: 11000 kg ATTACHMENTS -FINEBLANKING PRESS-   autom. tool clamping device: yes   decoiler: optional   waste cutter: yes   slug separator: optional very well maintained machi ...

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: link drive   feedstock transport direction: left to right SLIDE   total force (nominal): 80 to   stroke: 50 mm   stroke rate (max.): 80 /min COUNTER RAM   nominal force: 22 to   stroke: 8 mm V-RING   nominal force: 25 to   stroke: 15 mm TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm   shut height max.: 220 mm   ram adjustment: 80 mm   distance between columns (H-frame): 450 mm   passline opening (free passage in side columns): 200 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 180 mm   sheet thickness max.: 5 mm &nbs ...

CONTROLS   PLC PNEUTRONIC PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock   feedstock transport direction: left to right SLIDE   total force (nominal): 250 to   stroke: 61 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 75 to   stroke: 13 mm V-RING   nominal force: 75 to   stroke: 15 mm TOOL DIMENSIONS   lower table (left-right): 540 mm   lower table (front-back): 540 mm   upper table (left-right): 540 mm   upper table (front-back): 540 mm   shut height max.: 320 mm   ram adjustment: 145 mm STRIP-FEEDER   feeder type: roll feeder   pilot release system: yes ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMEN ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 30 to PRESS TABLE   table surface (left-right): 480 mm   table surface (front-back): 428 mm SLIDE (MECHAN. PRESS)   slide adjustment: 40 mm   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 40 mm   variable speed: yes   stroke rate (min.): 100 /min   stroke rate (max.): 600 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 220 mm STRIP-FEEDER   feeder type: roll feeder   feeding step min.: 20 mm   feeding step max.: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 4.5 kW   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/ri ...

CONTROLS   PLC SIEMENS S7 SLIDE   total force (nominal): 250 to SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 10 mm/s   working velocity max.: 44 mm/s   return velocity max.: 200 mm/s COUNTER RAM   nominal force: 63 to V-RING   nominal force: 100 to TOOL DIMENSIONS   lower table (left-right): 500 mm   lower table (front-back): 500 mm   upper table (left-right): 695 mm   upper table (front-back): 730 mm   shut height max.: 360 mm ATTACHMENTS -FINEBLANKING PRESS-   light barrier: yes   closed cabin: yes   decoiler: optional   leveller unit: optional   waste cutter: yes   slug separator: yes