We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,106 used machines on RESALE, but how to find them? Machine Search
used
Manufacturer: GWK Walzenheizgerät, Type: Teco 800, FREETEXT1: Kw Leistung 6, FREETEXT2: Warmwasserbetrieb, FREETEXT3: Max. 140 Grad , FREETEXT4: Regelbar,
used
Working width: 1400 mm Technical description: Operating side: right Working height: 900 mm, adjustable: +/-50 mm Width: 1400 mm EFF. Usable width: width 100 mm Clearance height: 120 mm Feed transport: 8.0 25.0 m / min frequency controlled Levelling roller: 0.7 5.7 m / min frequency controlled Material work piece: wood, wood, rigid Dimensions (min.) Thickness width length: 5 50 300mm Dimensions (max.) Thickness width length 80 1300 2000mm Tolerance max. Roller width +/-0, 2 mm Material coating: UV curable coatings and flowing coats Processing temperature: 18 ° c. Viscosity: up to 140 DIN sec, Ford 4 cups Drive type: Three-phase frequency inverter Power consumption: CA. 1,5 kW Mains voltage: 400 V / 50 Hz with power N-conductor Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar, min. 5 bar max. 8 bar Weight: 1.300 kg
used
Walzenstuhl Kaffee Mühle Bühler-Miag MDWA-25/10A - used - For grinding cereals and similar raw materials. The Wahlzenstuhl was previously used for grinding coffee beans. Manufacturer: Bühler-Miag Type: MDWA-25/10A Masch-Nr.: 1291 Year: 1977 Opening top approx. 960 x 395 mm with perforated sheets Roll diameter 250 mm Roll length 1000 mm Manual indentation and disengagement Drive motor Bauknecht 7.5 kW Operating instructions/documentation for the machine available. Total approx. 2200 x 1600 x 1450 mm Weight according to instructions approx. 3100 kg Changes and errors in the technical data, information and prices as well as intermediate sale reserved.
used
Manufacturer: Hongtai, Type: 2 Walzen Schleifmaschine, Year: 2017, Control: Weinwiev, Monting of the machine: Walze/Walze/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1350, Shore roller 1: ca.40, Shore roller 2: ca.60, Band 1 Leistung kW : ca.15, Band 1 Schleifbandgeschwindigkeit m/s : regelbar, Band 2 Leistung kW : ca.15, Band 2 Schleifbandgeschwindigkeit m/s : regelbar, Frequency control of belts: 2, Continous adjustable feeding speed m/min: 10-20, Vacuum table: yes, Diameter/ brush bristles: ca.200, Weight in kg: 5000, Year :2017
used
Technical data: 4 bending rolls Max bending range: 3,000 mm external switching and Control Panel, as well as counter holder
used
Roller spreader for rear mounting, drive via a 12 volt electric motor with overload protection (8 A). Container contents 120 ltr. , cam roller with interchangeable, asymetric cams (suitable for sand, salt and shards or granules)Roll width 125 cm, stirring shaft to prevent lump and bridge formation, low-wear 10-stage scattering volume regulation by adjustable spring bottom with rubber apron. With grating for accident protection and cable remote control (start/stop). Without growers! Scattering length salt approx. 5-6 km, sand approx. 1 km (manufacturer specifications) Built in 2012, unused, technically and visually as new condition, here and there paint somewhat repelled. Other roller spreaders, also trailers, self-loaders, drive hydraulic, PTO shaft or wheel stock. Winter service technology of all kinds, also slingshot spreaders, snow shields, snow blowers, tractors and used compon ...
used
roll diameter: 250 mm roll length: 500 mm rolls drilled: Kernbohrung nip adjustment: mechanisch drive power:: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 3000 mm plate thickness: 50 mm pre-bending: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: / t stroke: / mm table-size: / mm weight of the machine ca.: 65000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rollers for SM 52-2 2 new application roller d 64.5 _____250 EUR /pcs. 2 new application roller d 61 _____244 EUR / pcs.
used
Flour spreader, Rijkaart, 610 mm
used
Roll/Roller for Pastry Line Product Description:? Manufacturer: unknown, nameplate not available? Condition: used, not tested? Exterior dimensions: 95 x approx. 100 x 33 cm (WxDxH)For details see pictures
used
Croissant rolling pastry line FritschFor Fritsch systemCroissant cutterMass approx. 75x23cm height 27 cmBaker's conditionDetails see picture
used
Pastry line rollers FritschFor Fritsch plantDimensions approx. 75x23cm height 27 cmBaker's conditionDetails see picture
used
Pastry Moulding Machines Mold Rolls5 pieces we have in stockDimensions 58.5cm x 12.5cmDetails see picture
used
length: 5000 mm payload: 18 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer: Costa, Type: CCC + CCC 1150, Year: 1998, Monting of the machine: obenWalze/Walze/Walze , Equipment of machine 2: untenWalze/Walze/Walze, Double sided sanding line: yes, Sanding width mm: 1150, Sanding hight mm: 120, Number of sanding belts: 6, Sanding belt dimensions: 2620 X 1150, Table hight adjustment by engine: yes, Rubber roller: 3 +3, Shore roller 1: 70, Shore roller 2: 70, Walze 3 Shorehärte : 60, Längsschleifaggregate: ca.34, Belt 2 shoe unit: ca.22, Belt 2 synchronous and reverse run: ca.17, Belt 3 synchronous and reverse run: 34/22/17, Table hight adjustment by engine: yes, Combi unit roller/shoe: 8-20, Table hight adjustment by engine: ca 3 + 3, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Pressure pads for short workpieces: 150, Year :1998
used
Manufacturer: Weber , Type: KSV + KUV 2250, Year: 2005, Double sided sanding line: yes, Sanding width mm: 2250, Sanding hight mm: 120, Number of sanding belts: 2, Walze 3 Shorehärte : 2, Band 1 Kombiaggregat: no, Band 2 Gleich und Gegenlauf: ca.40, Band 3 Kombiaggregat Walze/Schuh: ca.40, Band 4 Kombiaggregat Walze/Schuh: ca.2,5, Band 4 Leistung kW : 1, Band 4 Drucklammellenband: yes, Combi unit roller/shoe: yes, Year :2005
used
Manufacturer: Ernst Funierschleifautomat, Type: 840-2, Year: 2003, Monting of the machine: Quer/lang/lang/lang/Bürste, Sanding width mm: 1305, Sanding hight mm: 3-120, Number of sanding belts: 4, Sanding belt dimensions: 2620 X 1350/5400 X 150, Table hight adjustment by engine: yes, Rollers: no, Band 1Querschleifaggregat: yes, Band 1 Leistung kW : 18,5, Band 2 Schuhaggregat: Simplex Schuh, Band 2 Kombiaggregat Walze/Schuh: no, Band 2 Leistung kW : 30, Band 3 Kombiaggregat Walze/Schuh: Simplex Schuh, Band 3 Leistung kW : 30, Band 4 Kombiaggregat Walze/Schuh: Duplex Schuh, Band 4 Leistung kW : 37, Elektronische Tastung mm: yes, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 13,5-60, Feeding engine kw: ca.4, Constant table hight: 880, Vacuum table: yes, Segment sanding shoe: yes, wast cleaning: yes, Ionising: yes, Weight in kg: 10200, Year :2003
used
Manufacturer: Unitek, Type: 3N RRT 1100, Monting of the machine: Stahl/Gummi/Schuh, Sanding width mm: 1100, Sanding hight mm: 160, Number of sanding belts: 3, Shore roller 1: Stahl 160 mm, Shore roller 2: Gummi 220 mm, Walze 3 Shorehärte : Schuh 50 mm, Band 1 Leistung kW : ca. 15, Band 1 Schleifbandgeschwindigkeit m/s : 18, Band 2 Leistung kW : ca. 15, Band 2 Schleifbandgeschwindigkeit m/s : 16, Band 3 Kombiaggregat Walze/Schuh: yes, Band 3 Leistung kW : ca. 15, Band 3 Schleifbandgeschwindigkeit m/s : 14, Table hight adjustment by engine: 0,25 kW, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 1,5,
used
Manufacturer: Heesemann 5 Aggregate, Type: LSM 8, Year: 2005, Control: Heesemann, Monting of the machine: Stahlwalze/Querband/Längsband/Längsband/Längsband/Bürste, Sanding width mm: 1300, Sanding hight mm: 3-80, Number of sanding belts: 5, Sanding belt dimensions: 2620 X 1350, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: 2, Transverse sanding units: 1, Längsschleifaggregate: 3, Bürstenaggregate: yes, Steel roller: 1, Bürstenaggregate: yes, Band 1 Leistung kW : 37/Walze, Band 1 Schleifbandgeschwindigkeit m/s : 28, Belt 2 shoe unit: Querschleifaggregat, Band 2 Kombiaggregat Walze/Schuh: zuschaltbare Stahlwalze, Band 2 Leistung kW : 18,5, Band 2 Schleifbandgeschwindigkeit m/s : 0,5-24, Band 3 Leistung kW : 20/24, Band 3 Schleifbandgeschwindigkeit m/s : 10-20, Band 4 Leistung kW : 18,5, Band 4 Schleifbandgeschwindig ...
used
Manufacturer: Weber, Type: OFZ-KS 2, Year: 1993, Control: Weber, Monting of the machine: Quer/lkombi-Schuh/längs, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350/4650 X 150, Rubber roller: 1, Shore roller 1: 150 mm (gummi), Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13/17, Band 1 Schleifbandgeschwindigkeit m/s : 11/22, Belt 2 shoe unit: Kombi, Band 2 Kombiaggregat Walze/Schuh: yes, Band 2 Leistung kW : 18,5, Band 2 Schleifbandgeschwindigkeit m/s : 2-20, Band 3 Kombiaggregat Walze/Schuh: schuh, Band 3 Leistung kW : 11, Band 3 Schleifbandgeschwindigkeit m/s : 2-20, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: 2, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 4-25, Intermediate sanding of lacquer: yes, Constant table hight: ...
used
Manufacturer: DMC, Type: Unisand K USK 1350 M3, Year: 2011, Software: DMC, Monting of the machine: Walze/Walze/Schuh, Sanding width mm: 1350, Number of sanding belts: 3, Rubber roller: 2, Längsschleifaggregate: 3, Weight in kg: 5350, Year :2011
used
Manufacturer: Purete 2 Walzenauftragsmaschine, Type: PRT-R2113B, Year: 2020 NEU, Control: Schneider oder Siemens, Program: Touchscreen, Work piece width min-max mm: 1320, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Operating side: links oder rechts, Working height: 980, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 0-20, kW - Leistung Transport: 1,5, Auftragswalzengeschwindigkeit m/min min-max: 5-20, kW - Leistung Auftragswalze: 1,5, Shore härten möglich: 5-65, Durchmesser Auftragswalze mm: 245, Double rubber coating: 1 Walze 50 shore/2 Walze gelasert, Stärke Gummierung min-max mm: 10-80, Dosierwalze verchromt: yes, Dosierwalzen Gleich und Gegenlauf: yes, Dosierwalzenschwindigkeit m/min min-max: 5-20, kW - Leistung Dosierwalze: 1,5, Durchmesser Dosierwalze mm: 175, Attachment bracket roller: yes, rbakel: yes, Separate Lackheizung: yes ...
used
Manufacturer: Bütfering, Type: SCO 413/TQEQ, Year: 2007, Control: Programmspeicher 600, Barcode: möglich, Monting of the machine: Querschleifen/Längschleifen/Querschleifen/Enststaubung, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rollers: keine, Transverse sanding units: 2, Längsschleifaggregate: 1, Bürstenaggregate: 1, Belt 2 shoe unit: Querschleifen, Band 2 Leistung kW : 13,5, Band 2 Schleifbandgeschwindigkeit m/s : 2-16, Belt 2 synchronous and reverse run: Längsschleifen, Band 3 Kombiaggregat Walze/Schuh: Schuh, Band 3 Leistung kW : 15, Band 3 Schleifbandgeschwindigkeit m/s : 2-18, Band 4 Kombiaggregat Walze/Schuh: Querschleifen, Band 4 Leistung kW : 13,5, Band 4 Schleifbandgeschwindigkeit m/s : 2-16, Separation of sampling in mm: 25, Frequency control of belts: 3, Continous adjustable feeding speed m/min: 4- ...
used
Manufacturer: Heesemann, Type: LSM 8, Year: 2016, Control: PC 10,4 , Monting of the machine: Walze / Walze, Sanding width mm: 1350, Sanding hight mm: 0,5 - 100, Number of sanding belts: 2, Sanding belt dimensions: 2620 x 1350, Table hight adjustment by engine: no, Steel roller: 2, Band 1 Leistung kW : 45, Band 1 Schleifbandgeschwindigkeit m/s : 0,1 - 24, Band 2 Leistung kW : 37, Band 2 Schleifbandgeschwindigkeit m/s : 0,1 - 24, Belt 2 synchronous and reverse run: yes, Frequency control of belts: 2, Table hight adjustment by engine: no, Continous adjustable feeding speed m/min: 5 - 25, Vacuum table: yes, Brushing unit: 1,5 kW, Year :2016
used
Manufacturer: Hess, Type: Junior, Year: ca1987, Control: L/L, Software: yes, Barcode: 190, Monting of the machine: 4 - 150, Equipment of machine 2: 2, Double sided sanding line: 5 - 25, Steel roller: yes, Steel roller: yes, Belt 1 shoe unit: 5,5, Belt 1 combined unit: 5,5, Band 2 Kombiaggregat Walze/Schuh: 1, Band 2 Innenliegendes Drucklamellenband : yes, Band 2 Schleifbandgeschwindigkeit m/s : 280, Belt 2 pressure segment belt: yes, Belt 2 synchronous and reverse run: yes, Band 3 Kombiaggregat Walze/Schuh: yes, Year :ca1987
used
Manufacturer: Heesemann, Type: LSM 8, Year: 1995, Monting of the machine: Quer/Längs/Längs/Längs/EA , Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 5400 X 150/2620 X 1350, Belt 1Transverse sanding unit: yes, Band 1 Leistung kW : 13/17, Belt 2 shoe unit: yes, Band 2 Leistung kW : 13/17, Band 3 Kombiaggregat Walze/Schuh: Schuh, Band 3 Leistung kW : 13/17, Band 4 Kombiaggregat Walze/Schuh: Schuh, Band 4 Leistung kW : 13/17, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: no, Continous adjustable feeding speed m/min: 5-25, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, wast cleaning: EA 2, Year :1995
Manufacturer: DMC, Type: Topsand, Monting of the machine: Walze/Walze/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Steel roller: 1, Shore roller 2: 70, Längsschleifaggregate: ca.30, Belt 2 shoe unit: 22, Belt 2 synchronous and reverse run: 17, Combi unit roller/shoe: 5-25, Table hight adjustment by engine: ca.2, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Vacuum table: yes,
used
Manufacturer: Boere , Type: BKS 900 / BBBg20/2, Year: 1985 / 1991, Monting of the machine: Walze Schuh + Walze/Schuh/Bürste, Double sided sanding line: yes, Sanding width mm: 900, Sanding hight mm: 150, Number of sanding belts: 4, Continous adjustable feeding speed m/min: 5 - 25, Rubber roller: yes, Shoe unit: yes, Shoe unit: yes, Schleifbänder unten: 2, Brushing unit: yes, Year :1985 / 1991
used
Manufacturer: Tagliabue, Type: L 600, Year: 1998, Monting of the machine: Walze/Walze, Sanding width mm: 600, Sanding hight mm: 0,5-30, Number of sanding belts: 2, Continous adjustable feeding speed m/min: 5-20, Feeding engine kw: ca.2, Sanding belt dimensions: ca.2620 X 630, Sanding belt speed m/sec: 2 Stufig, Power belt 1 in kW: ca12, Performance in kW belt 2: ca.12, Constant table hight: yes, machine ready for demonstration: yes, Year :1998
new
- Arbeitsbreite 1300 mm - min. Werkstücklänge 535 mm - min. / max. Durchlasshöhe 2 / 160 mm - Vorschubgeschwindigkeit stufenlos 3 - 30 m/min. 1. Schleifaggregat: - gummierte und gerillte Kontaktwalze 80 sh - Motor 22 kW / 400 V - Kalibrierwalze FI 240 mm - Schleifbandgeschwindigkeit 20 m/s 2. Schleifaggregat - Kombiaggregat Walze 70 sh / Schuh - Motor 15 kW / 400 V - gummierte und gerillte Kontaktwalze FI 210 mm - Einsatzsteuerung Einlauf / Auslauf - Schleifbandgeschwindigkeit 18 m/s - Motor Vorschub 4,0 kW - Motor Höhenverstellung 0,37 kW - Gesamtleistung 41 kW - Schleifbandabmessung 1330 x 2500 mm - Druckluft 8 bar - Luftverbrauch 17 m3/h - automatische Teppichzentrierung - Digitalanzeige mit automatischer Werkstückstärkeneinstellung - CIGO Gummi-Transportteppich - automatische Stern-Dreieck Schaltung - pneumatisch Bandspannung - Überdicken-Sicherung mit Selbstauslösung - Amper ...
new
Technische Daten: - Arbeitsbreite 1300 mm - min. Werkstücklänge 580 mm - min. / max. Durchlasshöhe 3 / 110 mm - Vorschubgeschwindigkeit stufenlos 3 - 30 m/min. 1. Schleifaggregat: - gerillte Kontaktwalze stahl - Motor 37 kW / 400 V - Kalibrierwalze FI 240 mm - Schleifbandgeschwindigkeit 20 m/s 2. Schleifaggregat - gerillte Kontaktwalze 80 sh - Motor 22 kW / 400 V - Kalibrierwalze FI 240 mm - Schleifbandgeschwindigkeit 20 m/s 3. Schleifaggregat - Kombiaggregat Walze 70 sh / Schuh - Motor 18,5 kW / 400 V - gummierte und gerillte Kontaktwalze FI 210 mm - Einsatzsteuerung Einlauf / Auslauf - Schleifbandgeschwindigkeit 16 m/s - Motor Vorschub 4,0 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 82,62 kW - Schleifbandabmessung 1330 x 2200 mm - Druckluft 8 bar - Luftverbrauch 17 m3/h - automatische Teppichzentrierung - Digitalanzeige mit automatischer Werkstückstärkeneinstellung - CIG ...
new
Technische Daten: - Arbeitsbreite 1100 mm - min. Werkstücklänge 570 mm - min. / max. Durchlasshöhe 10 / 160 mm - Vorschubgeschwindigkeit stufenlos 5 - 30 m/min. 1. Hobelaggregat 22,0 kW - Wellen FI 180 mm - Geschwindigkeit 33,8 m/s - Spiralmesserwelle mit 440 Stück HM-Wendemesser 2. Schleifaggregat: - gummierte und gerillte Kontaktwalze 80 sh - Motor 22,0 kW - Kalibrierwalze FI 240 mm - Schleifbandgeschwindigkeit 19,5 m/s 3. Schleifaggregat - Kombiaggregat Walze / Schuh 70 sh - Motor 15,0 kW - gummierte und gerillte Kontaktwalze FI 210 mm - Schleifbandgeschwindigkeit 18 m/s - Spannung 400 V, 50 Hz - Motor Vorschub 3,0 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 63,12 kW - Schleifbandabmessung 1130 x 2200 mm - Druckluft 6 - 8 bar - Luftverbrauch 15 m3/h - automatische Teppichzentrierung - Digitalanzeige mit automatischer Werkstückstärkeneinstellung - CIGO Gummi-Transportte ...
new
Technische Daten: - Arbeitsbreite 1300 mm - min. Werkstücklänge 570 mm - min. / max. Durchlasshöhe 10 / 160 mm - Vorschubgeschwindigkeit stufenlos 5 - 30 m/min. 1. Hobelaggregat 30,0 kW - Wellen FI 180 mm - Geschwindigkeit 33,8 m/s - Spiralmesserwelle mit 440 Stück HM-Wendemesser 2. Schleifaggregat: - gummierte und gerillte Kontaktwalze 80 sh - Motor 22,0 kW - Kalibrierwalze FI 240 mm - Schleifbandgeschwindigkeit 19,5 m/s 3. Schleifaggregat - Kombiaggregat Walze / Schuh 70 sh - Motor 22,0 kW - gummierte und gerillte Kontaktwalze FI 210 mm - Schleifbandgeschwindigkeit 18 m/s - Spannung 400 V, 50 Hz - Motor Vorschub 4,0 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 79,12 kW - Schleifbandabmessung 1330 x 2200 mm - Druckluft 6 - 8 bar - Luftverbrauch 15 m3/h - automatische Teppichzentrierung - Digitalanzeige mit automatischer Werkstückstärkeneinstellung - CIGO Gummi-Transportte ...
new
Technische Daten: - Arbeitsbreite 700 mm - min. Werkstücklänge 570 mm - min. / max. Durchlasshöhe 10 / 160 mm - Vorschubgeschwindigkeit stufenlos 5 - 30 m/min. 1. Hobelaggregat 15,0 kW - Wellen FI 180 mm - Geschwindigkeit 33,8 m/s - Spiralmesserwelle mit 440 Stück HM-Wendemesser 2. Schleifaggregat: - gummierte und gerillte Kontaktwalze 80 sh - Motor 15,0 kW - Kalibrierwalze FI 240 mm - Schleifbandgeschwindigkeit 19,5 m/s 3. Schleifaggregat - Kombiaggregat Walze / Schuh 70 sh - Motor 11,0 kW - gummierte und gerillte Kontaktwalze FI 210 mm - Schleifbandgeschwindigkeit 18 m/s - Spannung 400 V, 50 Hz - Motor Vorschub 2,2 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 44,32 kW - Schleifbandabmessung 730 x 2200 mm - Druckluft 6 - 8 bar - Luftverbrauch 6 m3/h - automatische Teppichzentrierung - Digitalanzeige mit automatischer Werkstückstärkeneinstellung - CIGO Gummi-Transportteppi ...
new
Technische Daten: - max. Arbeitsbreite 950 mm - min. / max. Durchlasshöhe 2 / 160 mm - min. Werkstücklänge 420 mm - Schleifbandabmessungen 980 x 2200 mm Schleifaggregat: - Kombiaggregat Walze / Schuh - gummierte und gerillte Kalibrierwalze 70 sh - Durchmesser Kalibrierwalze 120 mm - Motor 15 kW - Schleifbandgeschwindigkeit 18 m/s - Motor Vorschub 1,5 kW - Motor Höhenverstellung 0,37 kW - Gesamtleistung 16,87 kW - Spannung 400 V / 50 Hz - Druckluft 8 bar - automatische Teppichzentrierung - automatische Stern-Dreieck Schaltung - pneumatisch Bandspannung - Überdicken-Sicherung mit Selbstauslösung - Ampermeter zur Überwachung der Spanabnahme - Sofort-Stop mit Scheibenbremse bei Störung - pneumatische Schleifbandreinigung - Absaugstutzen 2 x 120 mm, 2 x 100 mm - Absaugvolumen 3500 m3/h - Abmessungen L=1780, B=1760, H=2080 mm - Gewicht 1700 kg
used
Working widths: 4600 mm Roller width: 4800 mm Number of rollers: 2 x S-Walze Stück Swimming roll - dia: 350 mm Roller covering - soft rubber: 75 Grad shore Pressure line: 50 N / mm Pressure total: 24 to Liquor trough with guide roll: Capacity of dye tub: ca.130 Liter Cloth guiding system for woven goods: geb. Breithalter vor Fuge Hydraulic unit for separately pressure: Drive shaft: ohne Antrieb • Dyeing padder with two Swimming Rolls, horizontally arranged, • with liquor trough with guide roll and displacer, • Machine will be completely overhauled before delivery. We supply with guarantee. (Photo shows a similar machine after overhauling) • New drive can be designed according to case of operation, extra charges: EUR 10000 - 12000 • Guarantee period: 6 months, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Antriebswalze 1 Stück / roller 1 piece Eurofold / Foldmaster Manufacturer Number: 235.100.321 Drive roller We offer different versions of rollers for Eurofold 235 / 435 / Foldmaster 200 folding machines Preis ist für eine Walze / Price is for one roller Art.: PS2811 depending on the one we have in the warehouse at the moment. They can be rollers with rubber rings or fully rubberized rollers. Fully rubberized rollers provide good adhesion to the paper and thus better paper transport. After your inquiry we will give you further information. Possible spare part number: 235.100.321 - Drive roller 235.000.889 235.000.888 435.100.001 235.000.887 For FoldMaster, ET numbers: 235.000.523 235.000.524 235.000.522 435.000.109
used
Rounds: 0 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1 Make Zopf 80 mm Type ZB 80 / 3 H Year 2009 profile bender / profil walze Sheet thickness (mm)Shaft = 80 mm Bending length (mm)152 / 162 / 193 Number of rolls Digital read out Accuracy Y axes 1/100 Universal set rolls
used
Manufacturer: Sandingmaster Breitbandschleifmaschine , Type: SA-3202-1100, Year: 1996, Monting of the machine: Walze/Kombi, Sanding width mm: 1100, Sanding hight mm: 140, Number of sanding belts: 2, Sanding belt dimensions: 2150-1150, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : yes, Elektronische Tastung mm: yes, Frequency control of belts: Band 2, Längsschleifaggregate: 2, Rubber roller: yes, Steel roller: Gummi ca.80 shore, Band 1 Leistung kW : ca.10, Belt 1 shoe unit: yes, Band 2 Leistung kW : ca.10, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 8-15, Transportbandantrieb kW: 1,5, Vacuum table: yes, Segment sanding shoe: yes, Weight in kg: 2500, Year :1996
used
Manufacturer: Bürkle Lackauftragsmaschine mit zusätzlicher Abzeihender Walze, Type: SALR , Year: 1999, Control: Siemens, Program: no, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 6-120, Durchlassbreite min-max mm: 1400, Operating side: rechts, Working height: 890+-, Lackauftragseinheiten: 1, Spachteleinheiten: 1 Reverseinheit, Vorschub Transport m/min min - max: 6-30, kW - Leistung Transport: 1,5, Auftragswalzengeschwindigkeit m/min min-max: 6-30, Gummierte Auftragswalze(n): 20, Dosierwalzenschwindigkeit m/min min-max: 5-12, Durchmesser Auftragswalze mm: 240, Double rubber coating: yes, Dosierwalze verchromt: yes, Reverse und Gegenlauf: yes, Dosierwalzenschwindigkeit m/min min-max: 5-12, Glättewalze verchromt: yes, Widht of roller coater: 1416, Attachment bracket roller: yes, rbakel: yes, Roller lift out: motorische, Ty ...
used
Manufacturer: Bürkle, Type: SLC, Year: 1999, Control: Siemens TD 200, Program: no, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 120, Durchlassbreite min-max mm: 1300, Operating side: rechts, Lackauftragseinheiten: 1, Spachteleinheiten: no, Vorschub Transport m/min min - max: 6-36, kW - Leistung Transport: 1,5, Auftragswalzengeschwindigkeit m/min min-max: 6-36, Gummierte Auftragswalze(n): 20 mm, Dosierwalzenschwindigkeit m/min min-max: 5-10, Gummierung mm: 20, Gummierung mm: 20, Durchmesser Auftragswalze mm: 239, Double rubber coating: yes, Stärke Gummierung mm: 20, Reverse und Gegenlauf: yes, Dosierwalzenschwindigkeit m/min min-max: 5-10, Attachment bracket roller: yes, everse drive: möglich, rbakel: yes, Roller lift out: no, Hight adjustment by engine: yes, Type of transportation: Band/Walze, Carriage: yes, Electronic ...
used
Hersteller : Giardina, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 170, EPDM: Poore 2, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Neu,
used
Manufacturer: Heesemann , Type: LSM 8 mit EA Entstaubung, Year: 2002, Monting of the machine: Walze/Quer/lang/lang/Lang/3 X Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 5, Sanding belt dimensions: 2620 X 1300, Steel roller: 1, Transverse sanding units: 1, Längsschleifaggregate: 4, Bürstenaggregate: 3, Band 1 Leistung kW : ca.35, Belt 1 shoe unit: yes, Band 2 Leistung kW : 17, Band 3 Leistung kW : 17, Band 4 Leistung kW : 17, Struckturieraggregat: Möglich, Vacuum table: yes, Year :2002
used
Manufacturer: Weber, Type: OFZ 1 - 1350, Year: 1993, Monting of the machine: Walze, Sanding width mm: 1.350, Sanding hight mm: 3 - 120, Number of sanding belts: 1, Sanding belt dimensions: 2.620 x 1.350, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : no, Table hight adjustment by engine: yes, Rubber roller: 1, Band 1 Leistung kW : ca 18, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: ca 5 - 15, Transportbandantrieb kW: ca 3, Intermediate sanding of lacquer: no, Year :1993
used
Manufacturer: Hymmen Lackwalze für TLX Länge mm 1400 shore 60 Walze muss geschliffen werden, Spare roller: TLX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: 60, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 215, Wedge follower: yes, Rubber coating defective: yes,
used
Manufacturer: Weber, Type: K 1-1100 V, Year: 2001, Monting of the machine: Walze, Double sided sanding line: no, Sanding width mm: 900, Sanding hight mm: 100, Number of sanding belts: 1, Continous adjustable feeding speed m/min: 2 - 14, Feeding engine kw: 1,3, Sanding belt dimensions: 2.620 x 1.150, Table hight adjustment by engine: no, Rollers: 1, Power belt 1 in kW: 15, Intermediate sanding of lacquer: no, Vacuum table: 2,2, Noise enclosure: yes, Brushing unit: 0,55 kW, Year :2001
used
Manufacturer: Bürkle Ersatzlackwalze 1416 50 shore mm 80 Gang gerillt Neu, Spare roller: SAL/SLC/DAL, Bürkle: yes, Roller rubber coating: 238, Rubber coating length cm: 1416, Shore Härte: 40, Approx. thickness of rubber coating in mm: 26, Stahlkerndurchmesser ca. mm: 187, Creasing on a 1 cm: Walze ist gelasert, Wedge follower: yes,
used
Manufacturer: Bürkle Lackauftragswalze 1416 mm ca 25 mm Gummi shore ca 25 Ersatzwalze Neu, Spare roller: SAL/SLC/DAL, Bürkle: yes, Roller rubber coating: 238, Rubber coating length cm: 1415, Shore Härte: ca.25, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 187, Creasing on a 1 cm: walze ist gelasert, Wedge follower: yes, Rubber coating defective: neu,