w 100a used for sale

material width:500 mm material thickness:0,2 - 3,8 mm feed length:0 - 9999,9 mm number of rolls:2 material cross-cut:128 mm² speed:60 m/min power requirement:2,0 kW dimensions (WxDxH):1,2 x 1,3 x 1,5 m roll feed:Servo control:Siemens S 7, modification 2002

material width:300 mm coil weight:0,5 t coil internal diameter:420 - 520 mm coil external diameter:1400 mm weight:0,6 t dimensions (WxDxH):0,8 x 1,2 x 1,7 m expansion:pneumatic

pressure:300 t distance between columns:1800 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table surface area:1600 x 1200 mm Table height above floor:1080 mm Ram surface:1600 x 1200 mm Weight:24,0 t Dimensions (WxDxH):2,8 x 2,1 x 6,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

Manufacturer: Wemhöner, Type: Transportband, Working length mm: 1500, Working widht mm: 2000, Total hight mm: 1000, Working hight adjustable mm: yes,

Manufacturer: Wemhöner, Driven: yes, incl.control: no, Working widht mm: 900, Width total mm: 1000, Total hight mm: ca 255, Adjustable: no, Roller pitch mm: 200, 1 Stückzahl : 3, 1 Stücklängen mm: 1600,

Manufacturer: Weeke, Type: Num Karte / Grafikkarte, Model: 0224203485K, Serial number: 10355/012 9845, Systemconfiguration: 134457, Year: 1997, was installed in machine: BP 195 T, Production number: 0-618-01-2987, Year :1997

Manufacturer: Wolf Zuluftanlage mit Wärmerückgewinnung, Year: 2014, Control: SeparaterSchaltschrank, Zuluftleistung m³/h: 25000, Heizmedium : Warmwasser, Temperatur vor-rücklauf: PWW 90-70, Jalousieklappen: yes, Stellmotore: yes, Taschenfilter Typ: EU 3, Umrichtergesteuert: yes, Pumps: yes, Einspeisung Wärmerückgewinnung: yes, Kann erfolgen über Produktionsmaschinen: yes, Year :2014

Manufacturer: Weinig Ferigungsanlage, Control: Weinig, Software: Klaes Sofware, Maschinensteuerung: Übergeordnet, Programming station office: yes, Manufacturer1: Weiniig Profimat, Machine type1: Profimat 23, Year of manufacture1: 1999, FREETEXT1: 5 Spindeln, Manufacturer2: Weinig , Machine type2: Unicontrol 10-5, Year of manufacture2: 1999, Manufacturer3: Weinig Transportsytem, Manufacturer4: Weinig, Machine type4: Unitec 10, Year of manufacture4: 1999, Manufacturer5: Stähle Schleifmaschine,

Manufacturer: Numgüttinger, Type: Num 1062 W, Model: aus Weeke bP 155, Serial number: 128327, Year: 1997, war verbaut in Maschine: aus Weeke bP 155, Year :1997

Manufacturer: Weeke, Year: 1996, Type: Frässpindel, Motor mit Getriebe: Werkzeugaufnahme HSK 63, aus Maschine: BP 155, Power kW: 7,5/10, N1-U/min: 750-18000, Motor mit Getriebe: Werkzeugaufnahme HSK 63, FREE TEXT: inkl Drehmotor für C Achse, Year :1996

Manufacturer: Wiwa Leimpumpe, Rubber coating length cm: 1416, Shore Härte: 50, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 196,

Manufacturer: WMS, Type: 20051, Year: 2001, Control: Hand, Pneumatical clamping system: yes, Saw blade tiltable up to °: 90-45, Schnitthöhe min-max mm: ca.100, Schnitttiefe min-max mm: 400, Schnittlänge min-max mm: 2110, Width adjustment by engine: yes, Saw blade diameter max mm: 450, Hauptmotorsäge kW: 4, rotations controlled: 2860, Year :2001

Manufacturer: Wiwa Leimpumpe, Type: 10018, Year: 90/630310, Volume flow m³/min: 10, Compressed air min/max bar: 8, Year :90/630310

Manufacturer: Wemhöner, Year: 1997, Type: KTV 28/15 - 165, Work piece width min-max mm: 1500, Min.-max. workpiece length in mm: 2800, Min.-max. workpiece height in mm: 10-40, Max. temperature °C: 90 / 180, Placing table: yes, Through running machine: yes, Pressing cylinder: 6, Pin system: no, Landing opening mm: 1, Foil cutter: yes, Through running machine: yes, Year :1997

Manufacturer: Walther + Cefla UV, Type: Pilot Signier + UV 2000, Spraying line: yes, Work piece width min-max mm: 1300, Spraying machine: Walther, UV dryers - 4 lamps (number): 1,

Manufacturer: GWK Walzenheizgerät, Type: Teco 800, FREETEXT1: Kw Leistung 6, FREETEXT2: Warmwasserbetrieb, FREETEXT3: Max. 140 Grad , FREETEXT4: Regelbar,

Manufacturer: Winkelübergabe mit pnematischer Aushebung, Working length mm: 1000, Working widht mm: 980, Ex-schutz: yes, UV-Band: 200, Total hight mm: 80, Working length mm: 1000, Engine power kW: 0,5, Belt control: Riemenaushebung für Transportrichtung links und rechts/Aushebung 1800 mm länge,

Manufacturer: Weeke, Year: 1999, Type: aus Weeke BP 195, Motor mit Getriebe: yes, aus Maschine: 195 Weeke, I-KL: 7,5-10, Motor mit Getriebe: yes, Baugrösse L x B x H mm: Werkzeugaufnahme HSK 63 F/18000-24000 Umin/12 KW Spindel, Year :1999

Manufacturer: Bauerrichter, Type: WRM 4 / S-E, Year: 1997, Number of units: 4, Working widht mm: 800, Through running hight max mm: 60, Diameter of brushes: 400, Number of rotations controlled: 250 - 2500 U/min, Units mounted inclined: 4, Fast exchange device: yes, Through running hight max mm: 60, Polishing width mm: 800, Engine power - kW: 4x 4 kW, Vacuum belt: yes, Exhaust diameter mm: 2 x 200, FREE TEXT: mit Oszillation, Year :1997

Manufacturer: Homag-Weeke Fräsmotor mit C-Achse, Year: 1998, Type: SMZ DIS. E13676, Motor mit Getriebe: yes, aus Maschine: Weeke 195 T, Kw output: 7,5, Volt/Hz: 315-380/400-482, Motor mit Getriebe: yes, Speed rpm: 24000, Flange motor design: yes, Year :1998

Manufacturer: HWS Wickelautomat, Type: HWS-S20, Year: 2001, Control: Programm, Work piece width min-max mm: 300-1500, Min.-max. workpiece length in mm: 400-2500, Min.-max. workpiece height in mm: 300-1600, Belt tension adjustable: yes, Function repeat: yes, Chassis: Rollenbahn, FREE TEXT: inkl Druckschuh von oben, Year :2001

Manufacturer: Weeke , Model: PKS-CPU, Serial number: 4-086-05-0230,

Manufacturer: Böhl Wickelautomat , Type: SV 1500, Year: 1993, Control: Siemens S 5, Work piece width min-max mm: 300-1200 , Min.-max. workpiece length in mm: 450-2500, Min.-max. workpiece height in mm: 20-900, Belt conveyor: yes, Aligning station: no, Width:165 to 250 mm: yes, Min-max roller diameter mm: 250, Automatic product recording: yes, Belt inlet control: yes, Function repeat: yes, Feeding belt L x W x H mm: ca 1500, Feed out belt L x W x H mm: ca.1500, Foot switch: Handschalter, Year :1993

Manufacturer: Weinig , Type: Unimat 17 A, Year: 1979, Control: hand, Planing widht mm: 10-170, Planing hight mm: 10-120, Min.-max. workpiece length in mm: 300, Number of spindles: 6, Diameter of the spindle mm: 30, Fast exchange device: no, Rotations of spindles max. rpm: 6000, Separate engine per spindle: yes, Fully suspended drive feeding: no, Year :1979

Manufacturer: Wire Electronik, Type: GNV 451-20/130, Seriennummer: 85957, Frequenzumrichter: yes, Input: 3X 130 Volt, Output DC Volt: 220 V/50-60 HZ,

Manufacturer: Bohreinheit , Type: Bohrtgetriebe mit Vorlegeeinheit, Year: 1999, Special bore gearbox: yes, Stück Bohrgetriebe : 2, Number of drilling spindles: 2, Grid: 32, Steel drilling head: yes, Run on the machine: Weeke, Quick-change lining: yes, Price per unit Euro: 1500, Available: sofort, FREE TEXT: Kw-Leistung 1,5/ 2000/3360 U/min, Year :1999

Manufacturer: Homag Tellerwechsler, Year: 1999, Type: 8 Fach Wechsler, Length mm: Ersatzteil aus Weeke 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 268778-33072, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03.1-W050-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Bohreinheit , Type: Bohrtgetriebe mit Vorlegeeinheit, Year: 1999, Special bore gearbox: yes, Stück Bohrgetriebe : 2+ 1, Number of drilling spindles: 18/3, Grid: 25, Steel drilling head: yes, Run on the machine: Weeke, Quick-change lining: yes, Price per unit Euro: 1500, Available: sofort, FREE TEXT: Kw-Leistung 1,5/ 2000/3360 U/min, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS02-1-W200-DA01-01-FW, SN Nummer: DDS2.1-W200-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 269778-3369, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03.1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-1-W030-RA02-02-FW, SN Nummer: DDS03-1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS 303.1-W50-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 268778, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03. 1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W030-RA02-02-FW, SN Nummer: DDS03.1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-W030-RA01-02-FW, SN Nummer: DD-S 1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W030-R-A02-02-FW, SN Nummer: DD03. 1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-1-050-DA01-01-FW, SN Nummer: DD-S 1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Wabco , Type: PC-130 MR,

Manufacturer: Wemhöner , Type: Doppelseitige Prägeanlage, Year: 2002, Control: Siemens, Operating side: 6-15, Work piece width min-max mm: 100-200, System dismantled: yes, Prägestationen: 2, Reinigungsbürsten Stück: 4, Doppelseitig: yes, FREE TEXT: Transportsystem Wemhöner Vakuum, Year :2002

HBM Wotan WMO B105, CNC control system Siemens 820M

Manufacturer: Weinig, Type: Längs und Querförderer LKF/1, Bauyeshr : 1995, Control: yes, Working length max mm: 3600, Working lenght min mm: 250, Working widht max mm: 220, Feeding speed max m/min: 30, Feeding speed continous adjustable: no, Working hight adjustable mm: 860 +-, Länge Rückführung mm : ca.5000, Angular transfer: yes, Engine power kW: 2, Year :1995

DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.

Manufacturer: Wagner, Type: GM 200, Spraying heads - total: 1, Compressed air bar max: 250, Laquer reservoir litres: 20, Spray gun manufacturer: GM 2000, Spraying stations: 1, Laquer circles: 1, Laquer system - airmix: yes, Electrical power consumption kW: 0,76, Wight approx. kg: 32,

Number of boring spindles: 8 St. Working width: 20 - 230 mm Working height: 8 - 120 mm Length of the planing table: 2.500 mm Feed motor: 4 kW Feed speed: 5 - 24 m/min. total power requirement: ca. 60 kw Dimensions (L/W/H): mm weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack crossbar: Shelving system: Nedcon Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Box profile: 130 x 50 mm Clasp: 7 HK (hooks) Clear width: 3,700 mm Max. load per pair of trusses 3,000 kg at the same weight. Distributed load 02x Locking pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Walk-In Freezer Brand: Kide With EMB1010L1Z Kide Monoblock Refrigeration Unit Refrig. R-404 Load 0.95kg Weight 79kg Year 2015 Dimensions: 2550 x 2300 x 2160mm

Cutting line WEBER SLC 602 with Slicer CCS 602 with CCW scale (up to 1,000 g) with CCR seesaw (sorting belt) with inlay line CCA with CFS thermoforming vacuum packaging line TIROMAT POWERPACK type 660 with Metal Detector LOMA IQ3 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

Thread milling and hobbing machine Wanderer 31 NU Machining length 3000 mm With accessories

max. wheel diameter: 400 mm gear width: 275 mm gear width: 275 mm max. module: 6 weight of the machine ca.: 5,5 t shifting: 100 mm dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.