We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,017 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
We offer you here a second choice half-timbered brace of the manufacturer SSI Schäfer for sale. Technical data for the truss strut: Shelving system: SSI Schäfer Type: PR 600 Included in delivery are: 01x half-timbered strut, SECOND choice Material color: sendzimir galvanized Total length: approx. 1,249.2 mm Middle-center hole: approx. 1,209.2 mm Profile dimensions: C 40 x 30 x 8 mm Diameter hole: approx. 11 mm Material thickness: approx. 1.25 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
used
Description Angle 90 Bandwidth 500mm Right-hand side Height-adjustable Retrofit with frequency converter possible for an extra charge 2 pieces available
used
We offer you here a second choice half-timbered brace of the manufacturer SSI Schäfer for sale. Technical data for the truss strut: Shelving system: SSI Schäfer Type: PR 600 Included in delivery are: 01x half-timbered strut, SECOND choice Material color: sendzimir galvanized Total length: approx. 1,270.0 mm Middle-center hole: approx. 1,230.0 mm Profile dimensions: C 40 x 30 x 8 mm Diameter hole: approx. 11 mm Material thickness: approx. 1.25 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
used
We offer you here a second choice half-timbered brace of the manufacturer SSI Schäfer for sale. Technical data for the truss strut: Shelving system: SSI Schäfer Type: PR 600 Included in delivery are: 01x half-timbered strut, SECOND choice Material color: sendzimir galvanized Total length: approx. 1,304.4 mm Center-center hole: approx. 1,264.4 mm Profile dimensions: C 40 x 30 x 8 mm Diameter hole: approx. 11 mm Material thickness: approx. 1.25 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
used
Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: PR 600 Included in delivery are: 01x pallet rack traverse, new Material colour: RAL 5010 Gentian blue Truss type: TRV1-270-144-30-CE Box profile: 140 x 40 mm Agraffe: 5 HK (hook) Clear width: 2,700 mm load per pair of trusses 4,300 kg, with the same. distributed load 02x safety pins, new Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.
new
60,000 litres of earth tank - new from the factory - single-walled - for storing rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,50m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 1 ...
used
Stock number: U2395-3 Used vertical stainless steel silos for powders with total volume about 6000 l. Tank has internal diameter 180 cm x length of straight side of wall 144 cm. Silos has conical bottom, equipped with vibrating discharge outlet driven by el vibrating motor and pneumatically operated valve. Diameter of discharge 200 mm. Silos had been mounted on cylindrical support. Feeding inlet via top located connection to pneumatic conveyer. Silos has side wall rectangular connection for dust filter with dimensions 570 mm x 490 mm. There is a inspection manway with bolted lid with diameter 500 mm. Last time used in food industry.
used
used
ERMAKSAN LASERMAK 6000 6X2 laser cutter was produced in 2014. Technical parameters: – laser source: 6000 W CO2-laser GE Fanuc C6000i-Model C – RF-excitation: 2 MHz – power stability: ± 2% (power monitor) – laser wave length: 10.6 μM – beam mode: Fanuc Low Order Mode – laser shutter: mechanical safety shutter – laser gas composition: CO2 / He / N2 – gas consumption by laser: 20 l / h – cooling water flow rate: 250 l / min – maximum cutting capacity: mild steel 25 mm (during tests the maximum achieved: 30 mm), stainless steel 15 mm, aluminum 12 mm - machine activation time: 22899 h - working time: 10122 h - cutting time: 8429 h – total energy requirement: 100-120 kW – cutting head focal length: 5 -7” -10 inch – maximum worksheet size: 6150 x 2000 mm – maximum burden capacity: 4000 kg – machine axes: 5 axes [X, Y, Z, U (X2), V] – axis ...
used
We offer you here a used workbench of the manufacturer Gemac for purchase. Workbench depth: 600 mm Technical data for the workbench: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized 08x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 600 mm Chipboard if necessary two-part The images serve to illustrate ...
used
We offer you here a used Workbench of the manufacturer Gemac for sale. Workbench depth: 600 mm Technical data for the workbench frame: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized Optionally, we offer you: 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 600 mm Chipboard if necessary two-part Price per pc:: 27,45 € incl. 19% VAT. 08x drill screws, new Version: gal ...
used
Handtmann VF 608 Filling - Portioning - Turning Off Year of construction 2008 Price on request
used
CNC vertical lathe Swing diameter 850 mm Turning diameter 750 mm Turning height 600 mm CNC Controller fanuc
used
Planer and multi-leaf saw, ideal for batten production. 2 planing shafts above and below with 5 knives per shaft. Planing height 200 mm Planing width 600 mm. Engines: Bottom 18.5 KW. Above 18.5 KW. Electric table adjustment. Feed up to 23 m /min. Attached multi-leaf saw Raimann DK 14. Cutting width 407 mm. Cutting height 50 mm. Motor 37 KW. Setback fuses and fluted feed rollers with pressure. Feed unit on the inlet side.
used
PROTOS type 605-500 strap cutting machine with 500 mm cutting width, complete on metal stand and motor.
used
The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t
used
Nozzle tube system(s) three-dimensional Basket diameter 600 mm Basket load 100 kg Usable internal height 370 mm incl. accessories for CE certification: - Direct drive for the washing basket - Weekly timer - Water deficiency protection - Chip/particulate filter with bath cover plate - Vapour extraction Automatic level replenishment: - automatic level supplementation Function blowing off / drying: Pulse compressed air blow-off three-dimensionally Lye care: Disc oil skimmer – discontinuous oil discharge – For floating/demulsifying oils Bag filter system type Sʺ With 2 pieces of pressure gauge on the bag filter housing ʺAfterʺ Filtration Emptying and cleaning the system (occupational health and safety): Pumping device/flushing of the tank bottom Hose/nozzle in aluminium/plastic Option – AM execution: AM version for additional manual cleaning (high ...
used
Manufacturer: Arburg Type: 320 C 600 - 250 Year of construction: 2003 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 2470 bar general Engine: 15 kW Heating: 5.5 kW Dimensions: 3.4 m x 1.5 m x 1.6 m Weight: 2080 kg Screen text: German Optional extras Core train x1 Robot interface Sorting flap Hot channel integrated
used
for self-adhesive Tesa adhesive tape, Carton adjustable in height and width, Space requirement:1250 x 800 x 1600 mm high Weight 180 kg from location warehouse
used
Baader 601 Bone separator Condition: Good, working Baader 601 separates raw meat material from waste components - cartilages, veins, skin and bones. A flexible squeezing belt transports a product to a rotating perforated drum. There the raw material is go through a brief pressing operation. The hard particles such as bone and skin stay outside, soft parts are pushed inside the drum through the holes. Such model of separator differs by improved construction of loading and reliability. It is able to process coarse raw material such as shoulder bones. Capacity: up to 700 kg per hour Drum: 1, 3, 8 mm Electricity: 400 V - 3 - 50 Hz, 14 A Power consumption: 4 kW Dimensions (LxWxH): 1800 x 1080 x 1170 mm
new
Hydraulic swivel bending machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper cheek, backgauge (1000mm), goat feet with automatic tool clamping, electr./hydr. Adjustment of the bending cheek -Illustrations similar- hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-
used
PLASTIC BAGS MAKING MACHINE VAMA VC 600 Germany made in 2015. Technical data Manufacturer: VAMA GmbH Model: VC 600 Production year: 2015 Technical parameters The width of the film maximum: 600 mm The maximum length of the bag: 1200 mm Film thickness: 25-80 μm weld Capacity: 60 - 90 bags per minute Rolling rollers 2 with roll diameter: 700 mm Stacking position: 25-50 pieces Machine for the production of plastic bags Excellent condition, located in Poland
new
10,06 running meters shelf racks, 60cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 10,06 running meters Shelf offer 10,06 running meters consisting of: 11 x stand approx. 200 x 60 cm, disassembled (incl. 2 x foot & 2 x cover cap). 50 x base approx. 100 x 60 cm. 200 x shelf holders. 11 x diagonal 1176 mm ( for crossing ). 11 x turnbuckle (for crossing). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1422,00 € net ...
used
Volume : 618 ltr. Material : areas in contact with the product in stainless steel Working pressure : 3 bar Working pressure jacket : 3.5 bar temperature: 145°C Temperautr jacket : 148 ° C Vacuum drum : 50 mbar;
used
30,06 running meters shelf racks, 60cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 30,06 m Shelf offer 30,06 running meters consisting of: 31 x stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 150 x floor approx. 100 x 60 cm. 600 x shelf holders. 31 x diagonal 1176 mm ( for crossing ). 31 x turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 4199,00 € net plus lega ...
new
5,06 m shelving racks, 60cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 5,06 m Shelf offer 5,06 running meters consisting of: 06 x Stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 25 x floor approx. 100 x 60 cm. 100 x shelf holders. 06 x diagonal 1176 mm ( for crossing ). 06 x Turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 728,00 € net plus legally valid VAT ...
Tank,stainless steel,standing for foundation,tank cover in the side,Ø 3250 mm.
Tank,stainless acid proof steel,standing for foundation,tank cover in the side,Ø 3250 mm.
used
used
used
used
used
Ribbin mixer/dryer,stainless steel,for powder/granulate,double jacket,variable speed.
used
Ribbin mixer/dryer,stainless steel,for powder/granulate,double jacket,variable speed.
used
Wolfking silo,stainless steel,6000 l with HD vane pump,for minced meat etc.
used
grinding height: 60 mm grinding width: 120 mm grinding wheel diameter: 600 mm grinding length: mm workpiece height: 60 mm total power requirement: 50 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 ______________________________________________________________________ ________ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 1 ...
new
New machine GSL 300/600 Rotor diameter 300mm Rotor width 600mm Drehzal 150 min. Drive 11 kW Rotor blade 48 pieces Strator knife 2 Screen perforation 6mm Weight approx. 950 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common v ...
grinding diameter: 99999 mm grinding length: 99999 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m We offer the overhauling of your Kellenberger U-machine. Mail serial number and foto of the machine and you will get an offer. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m Overhauled with geometric KELLENBERGER protocoll -2-axis DRO -Paper filtration Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erford ...
used
grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Geometrisch überholt und neu la ...
used
x-travel: 600 mm y-travel: 350 mm z-travel: 140 mm table surface area: 700 x 300 mm spindle taper ISO: 40 spindle turning speed range: 100 - 4000 U/min distance spindle center to column: 395 mm distance spindle nose and table: min. 170 -max. 550 mm control: TNC 407 milling feeds: 3 + 2000 mm/min rapid traverse: 5000 mm/min spindle drive: 5,5 kW total power requirement: 9 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm weight of the machine ca.: 6,5 t CNC Steuerung Heidenhain TNC 426 Kühlmitteleinrichtung Spänewanne CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 600 mm Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Spindeldrehzahlen / spindle speed 6300 UpM /rpm Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Universaltisch / clamping area of universal table 750x530 mm Gewicht der Maschine ca. / weight 6500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter: 302 mm turning length: 600 mm control: Siemens type: 810 T tail stock: Tool changer: 12 Pos. tool taper: VDI 30 chip conveyor: 3-jaw-chuck diameter: 200 mm swing diameter: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
grinding height: 50 mm grinding width: 120 mm grinding wheel diameter: 600 mm total power requirement: 85 kW weight of the machine ca.: 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _______________________________________________________ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grin ...
used
pressure: 3 t throat: 0 mm stroke: 200 mm total power requirement: 15 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Loading caterpillar Hanomag D 600 functional, top engine
new
: 15-150 m/min dimensions of saw-band: 4400x34x1,1 mm : 305 mm : 305x335 mm capacity 90 degrees: round: 335 mm capacity 90 degrees: flat: 500x335 mm : 330 mm : 320x335 mm : 180 mm : 170x335 mm : 300 mm : 80 mm : 550 mm : 260 mm max. material throughput bunch voltage: Ø 320 / 320x320 mm min. dia.: 5 mm work height max.: 750 mm total power requirement: 3 kW AC Weight: 2020 kg dimensions: 5350x2300x2000 mm Standard equipment: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m / min - Hydraulic material full lift voltage - Automatic procedure of the vices - Minimum speed and saw blade monitoring - Electric miter turning via servo motor - Visualized program input with CNC control - Material insertion via servo-controlled ball screw drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 660 mm y-travel: 500 mm z-travel: 600 mm table surface area: 630 x 500 mm spindle taper: SK 40 spindle turning speed range: 20 - 6.300 U/min feeds: 30 m/min control: PHILIPS CNC 532 internal coolant system feed: 40 bar total power requirement: 50 kW weight of the machine ca.: 13,3 t dimensions of machine: 4,98 x 2,78 x 2,93 m with rotary pallet changer and hydr. swivelling head (horiz./vert.) Accessories: chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Offer consists of: - Gathering tower VAC-60Ha Horizon VAC-60Ha Year of construction: Suction air gathering machines - Technology: Touch & Work - Model: Suction and blow air collection tower - Number of stations: 6 - Error prevention: incorrect, double-blade and jam control - Job memory: 9 memory locations for repeat jobs - Expandability: up to 6 towers (36 stations) Programs: - Double cycle (non-stop operation) - Shooting (1x and 2x) - Brochure program - Block program - selective collection - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Loading capacity: 130mm/ station - Speed: up to 9,500 sets/h - Electricity: 230V; 50/60Hz - 1,86kW - Dimensions: 842x652x1.961mm - Weight: 310kg each On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance ...