133,395 used machines on RESALE, but how to find them? Machine Search
Max. drilling diameter in steel, strength 600MPa: 50mm, max. drilling diameter in cast iron, strength 250MPa: 60mm, max. boring diameter (with guide) in steel, 600MPa: 200mm, max. thread in steel, 600MPa: M50x1.5, max. thread in cast iron, 250MPa: M60x2, spindle reach: 320-1250mm, pitch circle of holes: 1208-3039mm, distance from spindle axis to base plate: 320-1380mm, max. arm height adjustment: 750mm, max. drill carriage travel on arm: 930mm, arm swivel range: +/-180°, spindle head diameter: 75h6, spindle diameter at front bearing: 55mm, length: 2900mm, width: 1120mm, height: 3271mm, weight: 4.2t, with documentation. An on-site inspection is possible.
4x Radial Drilling and Grinding Machines Comprising: TaiPiin TPR-820 radial drill with tools Optimum opti drill DH34BV Syderic bench drill Belt grinding machine Auction-ID: A1-48805-223
Machine number: 32250 Throat: approx. 1300 mm Speed: up to 1800 rpm Table dimensions: 1570 x 440 mm with one groove incl. matching accessories and documentation as well as gripper arm Auction-ID: A7-49089-373
bore capacity in steel (diameter): 32 mm arm length: 1230 mm table surface area: 1200 x 500 mm bore stroke: 180 mm feed - independent: 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds: 45 - 1370 U/min taper MK: 4 total power requirement: 2,7 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 26252 Technical data: - Drilling capacity into solid steel ST 60 22 mm - Drilling capacity GG 25 32 mm - Threading ST 60 M 20 - Threading GG 25 M 24 - Drilling spindle holder MK 4 - Quill stroke 140 mm - 18 drilling spindle speeds 60 - 3050 rpm - Drill feeds infinitely variable 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max 420 / 1320 mm - Swivel angle 320 ° - Table size 1200 x 600 mm - Table height 905 mm - mot. Height adjustment / stroke of the drilling column 430 mm - hydr. Columns + Boom Clamp - T – Vertical grooves on the left side of the machine - Coolant device - Drive 400 V / 1.1 / 1.6 kW - Space requirement approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight approx. 1800 kg
Donau Flex 135 Schnellradialbohrmaschine Hersteller: Donau Typ: Flex 135 Schnellradialbohrmaschine Zustand: gebraucht, sehr gut bis neuwertig Baujahr 2020 Stufenlose Drehzahleinstellung Stufenloser Pinolenvorschub Gewindeschneideinrichtung Abmessungen und Verfahrwege Werkzeugaufnahme MK 4 Säulendurchmesser mm 170 Tischabmessung mm 1200 x 600 Anzahl der T-Nuten 4 Abstand der T-Nuten mm 125 Pinolenhub mm 165 Säulenhub mm 450 Bohrleistung ins Volle St 60 mm 35 GG 22 mm 42 Gewindeschneiden St 60 M 30 GG 22 M 36 AC-Motor, frequenzgesteuert kW 4,0 bei 100 % ED. Drehzahlbereich: min -1 20 ? 3200 Vorschub stufenlos mm/U. 0,02 ? 0,7 Maschinenleuchte Spindelschutz
RADIAL DRILL SASS mod. TRL 1600 Drilling/tapping in steel diameter mm 50 Quill taper CM 5 Vertical quill travel mm 400 Sliding quill travel mm 85 16 rotation speed values rpm 32 ÷ 1945 Max. reach (column center to spindle axis) mm 1.600 Head movement along arm mm 1.295 Vertical arm movement mm 810 Min. max. height (spindle nose to base plate) mm 390 - 1.600 Column diameter mm 380 Approximate net weight Kg 4.500 Complete with: - Hub Auction-ID: A1-48745-26
RADIAL DRILL SASS mod. TRL 1600 Max. working diameter 90/110 mm Max. spindle/column centre distance 3,020 mm Min. drilling radius 695 mm Max. drilling radius 3.345 mm Min. spindle nose-to-base distance 540 mm Max. distance between spindle nose and base 2.250 mm Spindle - CM 6 110 mm Spindle stroke 550 mm Spindle speed - 24 from 19 to 1.540 RPM Spindle motor power 20 HP Column diameter 650 mm Total weight 15.700 kg Complete with: - Worktop (cube) Auction-ID: A1-48745-25
Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Hydraulic clamping -Documentation Dimensions: Hjbkn Asvw D Smeu S Tol LxWxH 2x1.7x1.9 meters / Weight 1900Kg
Table dimensions: 1100 x 400 mm with three grooves Throat: approx. 907 mm Speed: from 35 to 1800 rpm Auction-ID: A7-49089-393
Collet / Gamesa - Radial drilling machine / mobile crane -Boom approx. 1200mm -Universal angle head can be adjusted in several ways -Spindle speed 95 - 750 rpm -Automatic feeds -Morse taper MK4 -Boom height adjustable approx. 1400mm -Control cabinet retrofit Dimensions: LxWxH 2x1x2.1 meters / Weight 1500Kg Hebkjvucbhon Au S Tsl
Machine number: 1863 Operating voltage: 3 x 400 V Frequency: 50 Hz Nominal current: 14 A Throat: approx. 500 mm Speed: from 25 to 3000 rpm Table dimensions: 560 x 480 mm, with three grooves and a three-jaw chuck, diameter: 210 mm Auction-ID: A7-49089-266
Machine number: 6233-5 Speed: up to 2800 rpm Drilling diameter: up to 40 mm Projection: approx. 907 mm with two tables Table dimensions: 780 x 600 mm - with four grooves, as well as a three-jaw chuck, diameter: 400 mm Table 2: 1000 x 540 mm, with four grooves and two vices, one jaw width: 125 mm and 100 mm a four-jaw chuck, manufacturer RÖHm, diameter: 200 mm as well as a four-jaw chuck, diameter: 150 mm and a dividing head from the manufacturer HOFMANN, type: VTS 160 with a three-jaw chuck, diameter: 200 mm also various clamping systems, including KOHN clamping system, jaw width: 120 mm Auction-ID: A7-49089-208
bore capacity in steel (diameter): 28 mm arm length: 700 mm workpiece height max.: 1300 mm tool taper: MK3 feeds: 0,1-0,3 mm/U spindle turning speed range: 100-1.220 U/min total power requirement: 1,4 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: LBH 1,8 x 0,8 x 2,3 m Incl. cube table Incl. drilling feed Mechanical clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm arm length: 1100 mm bore capacity in cast iron: 60 mm quill stroke: 300 mm tool taper: MK 5 speeds: 22 - 1000 U/min feeds: ja mm/U Boring motor: 4,5 kw total power requirement: 7,5 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 2,1 x 0,9 x 2,85 m Radial drilling machine - Box table 750 x 750 x 500 mm - Coolant system - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DONAU Fast Radial DR 32 Radial Drilling Machine Robust high-speed radial drilling machine for drilling, countersinking, reaming and tapping work. The swivelling boom and hydraulic clamping allow the drill head to be flexibly positioned above the workpiece without having to realign the workpiece for different machining positions. Manufacturer: DONAU Werkzeugmaschinen Erich Arndt, Langenau Type: DR 32 Machine No.: 843-3 Machine Type: Fast Radial/Radial Drilling Machine Drilling capacity: up to Ø 32 mm Projection: 1,120 mm Tool holder: MK 4 (Morse taper) Spindle speed: 41 to 1,800 rpm Speed control: 18-speed Transmission: 9-speed, combined with pole-switchable motor Quill stroke: 190 mm Table: Slot table 1,200 x 500 mm, additional 2 T-slots at the rear Operating voltage: 380 V / 50 Hz / 3 Ph. Hydraulic operating pressure: approx. 26 kp/cm² Equipment: Tapping device w ...
Projection: approx. 700 mm Table dimensions: approx. 780 x 655 mm Speed range: 125 - 710 rpm Internal reference: previously lot 51 Auction-ID: A7-49882-263
Csepel RF50/1250 Radial Drilling Machine Robust and proven radial drilling machine of the quality manufacturer "Csepel" model RF50/1250. The machine is characterized by its solid construction and is ideal for locksmiths, workshops or demanding do-it-yourselfers. Technical data (according to nameplate): Manufacturer: Csepel (Budapest) Type: RF50/1250 Type of current: 3~ (three-phase current / 380 V) Frequency: 50 Hz Control voltage: 220 V Operating current: 10 A Required fuse: 16 A slow blow More items - new and used - can be found in our shop! International shipping costs on request!
Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of Make: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Tapping (steel/casting): M25 / M38 Projection (column to spindle centre): 330 – 1,230 mm Headstock travel: 880 mm Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 levels (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Boom height adjustment: 620 mm
bore capacity in steel (diameter): 40 mm arm length: 1050 mm workpiece height max.: - mm turning speeds: 15 - 2800 U/min feed range: 0,075 - 0,45 mm/min dimensions: 2450 x 1300 x 2300 mm Weight: 1500 kg Control: Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T- ...
Offer 26217 Technical data: - Drilling capacity into solid steel ST 60 40 mm - Threading ST 60 M 30 - Drilling spindle holder MK 4 - Quill stroke 200 mm - Drilling spindle speeds infinitely variable 50 - 2000 rpm - Drill feeds 0.08 - 0.50 mm/rev - Height adjustment of the drill column 380 mm - Projection 950 mm - Travel distance upper beam 590 mm - Table size 1200 x 500 mm - Drive 400 V / 4.5 kW - Space requirement approx. W 1200 x H 2400 x D 1700 mm - Weight approx. 2700 kg - with: - Tapping device - Hydr. Columns + boom clamp - Coolant device - T – Vertical grooves on the left side of the machine - Various accessories
Used, untested. MK4 recording. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-11
Key data: 30 mm, 700 mm
Radial drilling machine Manufacturer Danube Type DF130 / Danuflex 130 Digital Year of construction 2003 Spindle speed 40 - 3600rpm Feed rate 0.05 - 0.55 mm/rev Column diameter 170mm Quill stroke 170mm Table size 630 x 1200mm Table load 1000kg with 3D button Heidenhain Instruction manual available.
Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Drill chuck -Hydraulic clamping -Documentation Dimensions: LxWxH 2x1.7x1.9 meters / Weight 1900Kg
bore capacity in steel (diameter):40 mm arm length:1250 mm workpiece height max.:1390 mm Dist. spindle nose & working surface base:350 - 1260 Spindle travel:315 max. boring diameter:40 mm Distance between spindle axis and column:350 - 1260 spindle taper:4 MK Range of spindle speeds:22,4 - 2800 Number of spindle speeds:16 Number of spindle feeds:16 Table:500 x 630 Travel of spindle head:900 mm total power requirement:3,5 kW dimensions of the machine ca.:2150x1070x2840 m feed:0,09 - 1,5 m/min weight of the machine ca.:3 t
bore capacity in steel (diameter):45 mm WORKING RANGE -BORING-:. - drilling capacity full bore (steel):45 mm - drilling capacity full bore (cast iron):55 mm - horizontal travel:1050 mm - vertical travel:450 mm - sleeve stroke:200 mm WORKING SPINDLE / HEAD:. - spindle revolutions (min):15 /min - spindle revolutions (max):2800 /min - number of gears:2 - taper fixture : MK 4 :. - spindle power (continuous):5.5 kW - torque (max.):250 Nm - max. distance spindle ... clamping surface:710 mm - thread cutting attachment : yes :. TABLE:. - clamping surface (left-right):1200 mm - clamping surface (front-back):750 mm ELECTRICAL SPECIFICATIONS:. - total power consumption:7 kW - mains power supply:9.3 kVA - mains voltage:400 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - space requirements length:3000 mm - space requirements width:3000 mm - total height:3000 mm - total weigh ...
bore capacity in steel (diameter):63 mm arm length:2000 mm workpiece height max.:135 mm spindle stroke:400 mm reus:16 Stufen table-size:630 x 800 mm tool taper:MK 5 speeds:20 - 1600 U/min spindle feeds::0,04- 32 mm/U work table::800 x 630 x 550 mm total power requirement:5,5 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:3100 x 1250 x 2500 mm Year:ca. 1990
bore capacity in steel (diameter):63 mm arm length:2000 mm workpiece height max.:135 mm spindle stroke:400 mm reus:16 Stufen table-size:630 x 800 mm tool taper:MK 5 speeds:20 - 1600 U/min spindle feeds::0,04- 32 mm/U work table::800 x 630 x 550 mm total power requirement:5,5 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:3100 x 1250 x 2500 mm Year:ca. 1990
bore capacity in steel (diameter):40 mm arm length:1200 mm workpiece height max.:1227 mm surface area:1475 x 900 mm no. of flutes:3 groove width:25/ 50 mm spindle cone:MORSE 4 number of spindle speeds:45- 2800 U/min spindle headstock:Bew.Arm : 945 mm with vertical adjustment:Arm 710 mm spindle diameter:35 mm bore depth:300 mm total power requirement:3,0 kW weight of the machine ca.:2800 kg dimensions of the machine ca.:2290 x 910 x 2860 mm
bore capacity in steel (diameter):40 mm arm length:1200 mm workpiece height max.:1227 mm surface area:1475 x 900 mm no. of flutes:3 groove width:25/ 50 mm spindle cone:MORSE 4 number of spindle speeds:45- 2800 U/min spindle headstock:Bew.Arm : 945 mm with vertical adjustment:Arm 710 mm spindle diameter:35 mm bore depth:300 mm total power requirement:3,0 kW weight of the machine ca.:2800 kg dimensions of the machine ca.:2290 x 910 x 2860 mm
Ring mast attachment R25, Tear in the tire, Double air hooks 9 pieces, Dents in the rims, Auction-ID: A1-47390-319
Main motor: 3 kW Lifting motor: 1.5k kW Drilling capacity (steel): approx. 50–60 mm Protective cladding and coolant device available Auction-ID: A7-50222-11
Equipped with: 2x tire and 2x rims 8 holes Auction-ID: A1-47390-502
Vertical band saw HESKA type ESA 4Fabr. No. 681174 year of construction approx. 1985Roller diameter 420 mmThroat depth 400 mmTable size 500 x 500 mmCutting height 285 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed Gear stage (1) 15-140 m/min. Saw blade speed gear stage (2) 150-1400 m/min. Motor power 1.5 kWNet connection 380 volts, 50 Hz - stepless saw blade speed via PIV gearbox with handwheel adjustment and 2 gear steps - saw table swivel in 2 axes -
Vertical band saw MÖSSNER REKORD type SM 420Masch. No. 17010 Year of construction 1968Roller diameter 420 mmRadius in width 415 mmRadius in height 265 mmTable size 605 x 600 mmBelt speed 18 - 562 m/min. 8 stepsSaw blade length min/max. 3150 / 3260 mmDrive power 1.1 / 1.7 kWNet connection 380 V 50 Hz- Saw blade speed over 4 gear stages and 2 motor speeds- Saw blade butt welder IDEAL BS 0-16 with scissors and grindstone- swivelling work table in 2
Vertical band saw JAESPA type MSU 4Fabr. No. 724749 year of construction approx. 1980Roller diameter 420 mmProjection 400 mmTable size 610 x 610 mmCutting height 260 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed 10-1500 m/min. infinitely variableMains connection 400 volts, 50 Hz- infinitely variable saw blade speed via 2 gear stages and infinitely variable via belt drive- Saw table swivel- Saw blade butt welding machine IDEAL BS0-16- Saw blade shear- Sharpening stone for grinding the weld seamSpace requirement L x W
Thimonier THB9200 Vertical Form Fill & Seal Filling Machine (2021) 50-500ml berlingot (pillow-style triangular pouch) Liquids & viscous products (including corrosive detergents) Auction-ID: A1-48805-2
Thimonier THB9200 Vertical Form Fill & Seal Filling Machine (2021) 50-500ml berlingot (pillow-style triangular pouch) Liquids & viscous products (including corrosive detergents) Auction-ID: A1-48805-1
Pressing force: approx. 8 tons Connection value: 230 V 1.5 kW Filling shaft: 630x460x750 mm Bale size: 630x460x700 mm Bale weight: approx. 30 - 80 kg Machine size 830x970x1870 mm WxDxH Machine weight: 360 kg Warranty: 12 months Condition: technically and optically revised Completely overhauled with new paint!
Technical data: Machine stand, Type 539 Band saw roll diameter 1400 mm Band saw roll width 180 mm Saw blade width max. 200 mm Saw blade length max. 9300 mm Saw blade thickness 1.3 mm Saw blade speed approx. 42 m/sec. Drive power 45 kW, (1500rpm) Cutting feed requires. 22.5 m/min -Incl. electrical equipment, consisting of limit switches for saw blade voltage, path limitation for transverse movement -2 electromechanical width adjustment devices with precision spindle and two-stage special drive - designed for connecting a Fraba digitizer 2800 -2 hydro-pneumatic band saw roller brakes
Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd
Technical data: -2.77 l/s, 14.7 m -Rated speed: 1440 1/min -Inlet: DN 50 -Print: DN 40 -Motor: 11 kW -2-pole New price: 16,500
Campagnolo Packaging Systems Vertical form and seal machine Model: C25 Serial:A02-02
Vertical internal broaching machine, used Vertical internal - broaching machine. used Type / type: RITS 16 x 1500 x 500 Manufacturer / make: Artur Klink year / new: 1995 Biggest tensile strength / maximum pulling power: 16 t Max stroke length / max broaching length: 1500 mm Table width / table width: 500 mm Räumgeschwind. / broaching speed: 1..6, 4 m / min Rücklaufgeschw. / return speed: 19.5 m / min maximum tool length / max length of tool: 1700 mm Power consumption / connected power: 42 kW Size / weight: 16 t Specification: optional spaces right or left, and at the same time right and left / / 2-jobs broaching right or left / right and left at the same time
maximum number of results exceeded
please refine your search
600 € 
