vertical lathe used for sale

Key data: 1050 mm, 510 mm, 510 mm

Inv. Num. : 7111 Type: NEXUS 510 C Producer: MAZAK Created: 2008 Parameters: Control system: MAZATROL MATRIX NEXUS Duty cycle: 14206 h Hours: 4777 h Work table length: 1300 mm Work table width: 550 mm Spindle drive power: 11 kW Speed: 12,000 rpm X-axis travel: 1050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: ISO 40 Number of stacking positions: 30 pieces Machine weight: 6886 kg Equipment: Tool Probe IKZ

Inv. Num. : 7105 Type: INNO 810 Producer: MACRO Created: 2011 Parameters: Control system: HEIDENHAIN 530 Work table length: 810 mm Work table width: 410 mm Maximum table load (uniform): 300 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 810 mm Y-axis travel: 410 mm Z-axis travel: 500 mm Maximum feed speed axis X: 3000 mm/min Maximum feed speed axis Y: 3000 mm/min Maximum feed speed axis Z: 3000 mm/min Machine height: 2500 mm Machine length: 3800 mm Machine width: 2000 mm Machine weight: 4000 kg Equipment: Workpiece probe Tool Probe

Weight: +/- 1,1 tons Power: 15 kW Length mm: 6800 Width mm: 1300 Height mm: 2300 Working height: 400 Transport size L x W x H: 2,5 x 2,4 x 2,3 mtr Maximum speed: 4 m/min Min.-max. glass thickness: 2 - 12mm Min.-max glass size: 2 x 3 Number of brushes: 4 brushes Condition machine : Disassembled in working order Control type: Manually Electric. Connection: 32A 3P+N+PE Photos/film available: Photos and video available Remaining: Left to right / RVS

Serial Number: 7880-10 Weight: 2,5 tons Power: 6 kW Air pressure: 6 bar Length mm: 5000 Width mm: 1000 Height mm: 3500 Working height: 70 cm. Transport size L x W x H: 5,0 x 1,0 x 3,5 + 1,1 x 0,8 x 1,35 Maximum speed: 1,6m/min. Min.-max. glass thickness: 50 mm Condition machine : Good Control type: Manually/ semi automatic Electric. Connection: 400 V Documentation: No Instructions: No Electric diagram: No Photos en video available

Clocked, vertical Bosch flow-wrapping machine for powdered products with gassing and checkweigher The following components are installed: Bosch form, fill and seal machine Machine type: SVB3601R Year of construction: 2000 Clocked form, fill and seal machine Theoretically possible cycle rate: 50 btl./min. Bosch screw feeders Machine type: FVS 3091 SQ Products suitable for dosing: -Granules -Powder -Icing sugar -Flour - Ground coffee or coffee beans - Sauce, soup or milk powder, etc. Fumigation device Machine type: ZSG Basic 2 Residual oxygen monitoring can be switched on/off Bosch checkweigher Machine type: KWE 5000 Year of construction: 2009 The plant was dismantled and stored due to product changeover. 6 months before the removal of the machine, a lot of investments were made, including the installation of new sealing jaws and a new display. We ...

The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow-wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width cross: 2mm Seam width lengthwise: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erecting and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard currently. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap capping station Takeover of the folding cartons and transport to the filling station, fixation under the filling station a ...

Key data: 3000 mm, 800 mm, 720 mm

Mazak VTC 800/30-SR CNC 5 (6) Axis Travelling Column Vertical Machining Center CNC control Mazatrol Matrix 2 Table size 3500 x 820 mm Table load 2500 kg Number of pallets 1 Travel X-Y-Z axis 3000 - 800 -720 mm C-axis (table rotation) 0.0001° B-axis travel ± 110° Spindle speed 35 - 18,000 rpm Spindle taper HSK-A63 Spindle motor 35-26 kW Magazine capacity 30 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

Key data: 1625 mm, 860 mm, 760 mm

Control Ultimax 4 Travel X/Y/Z: 1625/860/760 mm Speed 8000 min-1 Tool magazine for 40 Wkz., SK 40 IKZ Conveyor

Mazak VTC 20 B Vertical Moving Post Center :::SPECIFICATIONS::: CNC Model: Mazatrol CNC Version: M plus Tool holder: ISO 40 Spindle speed: 6000 Number of tools: 24 X-axis stroke: 1120mm Y-axis stroke: 510mm Z-axis travel: 510mm Table size: 1040 x 510mm Table capacity: 800Kg Guides: roller High refrigerant pressure: yes

X axis travel 12.000mm Max height under head 1.800mm Y axis travel 3.200mm Z axis travel 1.000mm W axis travel 2.100mm Table dimensions 12.000 X 3.000mm Max weight on table 60 ton Spindle power 47 Kw Max spindle speed 4.000 Rpm CNC SIEMENS 840 D Head changer with nr.04 heads ATC 60 utensili Rebuilt year 2008

YOM 2009 X axis travel 28.000mm Y axis travel 6.500mm W axis travel 2.000mm Z axis travel 1.500mm Table dimensions 25.000X5.000mm Automatic head changer with Nr. 03 heads Nr.10 planos 5.000X2.500X300mm CNC SIEMENS 840 D nr.03 axes automatic head in continuos, spindle speed max 4.000rpm,56 Kw, HSK A 100 Vertical head max spindle speed 3.000rpm,56 Kw, HSK A 100 Angular head max spindle speed 3.000rpm,56 Kw, HSK A 100 High pressure refrigeration trough spindle (50 bar) ATC 120 positions

DECKEL MAHO DMC 63 V CNC vertical machining center was built in Germany in 2005. The machine used in series and unit production, is characterised by its high machining capacity and stable construction with a reinforced work table, which ensures the highest possible precision in milling. The installed FANUC 180i-MB CNC controller additionally guarantees trouble-free operation of the machine and the use of its full potential and capabilities. The DECKEL MAHO GILDEMEISTER CNC machining center has been serviced on an ongoing basis and has worked for 26040 hours to date. Technical data of the DECKEL MAHO DMC 63 V milling center - work table dimensions (L x W): 800 x 500 mm - feed rates in the X/Y/Z axis: 630/500/500 mm - positioning accuracy of the X,Y,Z axis: 0.010 mm - maximum spindle rotational speed: 10000 rpm - spindle taper: SK 40 - 24-position tool magazine - operating hours: ...

Leadwell MCV 610CR Vertical Machining Center :::SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 0 - M Tool holder: ISO 40 Spindle speed: 6000 Number of tools: 24 X-axis stroke: 610mm Y-axis stroke: 410mm Z-axis travel: 510mm Rapid feeds for linear axes X Y Z: 20m/min Table size: 890 x 500mm Table capacity: 300Kg Machine equipment: Fourth axis table :::D DIMENSIONS AND WEIGHT::: Length: 2040mm Width: 2820mm Height: 2800mm

MATSUURA MC 600 VF Vertical Machining Center YOM 1996 X axis 600 mm Y axes 410 mm Z axis 470 mm Working capacity 600 x 410 x 470 mm Tool changer 20 TC Table capacity 800 x 400 mm Table load 400 kg Spindle speed range 30- 8000 Rpm Spindle taper ISO 40 Spindle bore 80 mm Weight 4000 kg

CNC Machining Center Vertical DECKEL-MAHO - DMC 635 V Built in 2006 in good condition. Control iTNC 530 Heidenhain Duty Cycle: 35172 Hours: 5903 Specifications: x-travel 635 mm y-travel 510 mm z-travel 460 mm Main Spindle: Speed range - main spindle 20 - 8,000 min/-1 Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 83 / 57 Nm Clamping force 8 kN Workbench: Table clamping surface 790 x 560 mm Number of T-slots 4 + 1 T-slots - spacing 100 mm T-slots - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Table height above floor 720 mm Distance between spindle nose and table 120 - 580 mm Tool changer: Number of tool slots 20 pos. Max. tool width 80 / (130) mm max. tool length 250 mm max. tool weight 6.0 kg max. total weight 80 kg Tool - Tool change time 1.6 sec Changeover time span - span 6.0 sec Feeds: Rapid traverse 30 m/mi ...

CNC Machining Center Vertical DECKEL-MAHO - DMC 63 V Built in 2002 in good condition. Control Heidenhain TNC 430 Heidenhain Hours: 10985 Specifications: Main spindle Speed range - main spindle 20 - 8,000 rpm Drive power - main spindle 13 / 9 kW Max. torque 83 / 57 Nm Tool holder SK 40 Workbench: Table clamping surface 800 x 500 mm max. table load 500 kg Installation height max. 240 mm Number of T-slots 5 T-slots - width 14 H12 mm T-slots - spacing 100 mm Distance between spindle nose and table 150 - 650 mm Feeds Feed rate X, Y, Z: 30,000 mm/min Rapid traverse ( X / Y / Z ) 30 m/min Tool changer: Tool changer 24 pos. max. tool diameter 80 mm max. toolthrough. with a free neighbor's box. 140 mm max. tool length 300 mm max. tool weight 7 kg Total power requirement 30 kVA Machine weight approx. 4 t Space requirement approx. 4.0 x 3.5 x 2.7 m Accessor ...

Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor

SECOND-HAND VERTICAL SANDER

Inv. Num. : 3505 Type: AJV-25/404 Producer: MAZAK Generated: Parameters: Control system: MAZATROL M-32 Work table length: 1240 mm Work table width: 550 mm Maximum table load (even): 800 kg Spindle drive power: 15 kW Minimum vertical spindle speed: 28 1/min Maximum vertical spindle speed: 4000 1/min Mechanical feed length axis X: 1000 mm Mechanical feed length axis Y: 508 mm Mechanical feed length axis Z: 460 mm Cone: ISO 40 Number of tools: 30 pieces Maximum tool diameter: 100 - 150 mm Max. tool weight: 8 kg Distance between uprights: 650 mm Accuracy: 0.02 mm Machine height: 3026 mm Machine length: 3810 mm Machine width: 2590 mm Machine weight: 8.1 t

GRP tank, suitcase tank, vertical, three-chamber tank with three domes and lids Water tank, upright Polyester tank with a volume of 10,000 L Dimensions: 1.40 m wide x 1.90 m deep x 4.35 m high

SECOND-HAND VERTICAL HYDRAULIC CLAMP FOR WOOD PANELS STROMAB MOD. SL1 - CE RULES - volt. 400/50 - year 2009 - 3000x1300mm

SECOND-HAND VERTICAL SANDER WITH 2 BELTS OMA MOD. UNICA - transversal sanding on two sides of straight or shaped / curved elements - n. 2 motors for abrasive belts 7.5 hp each - n. 2 abrasive belts 3700x90 mm - Automatic feeding 4-20 m / min - minimum working length 320 mm - Max. piece height 130 mm - CE year 2001

Key data: 1200 mm, 400 mm, 425 mm

Inv. Num. : 4455 Type: FZ 16L Producer: CHIRON Created: 1987 Parameters: Control system: Siemens Sinumerik System 3 Work table length: 1880 mm Work table width: 475 mm Mechanical feed length axis X: 1200 mm Mechanical feed length axis Y: 400 mm Mechanical feed length axis Z: 425 mm Machine height: 4000 mm Machine length: 2400 mm Machine width: 2800 mm Machine weight: 3500 kg

Nv. Num. : 7401 Type: QM-40 SA Producer: Feller Created: 2007 Parameters: Control system: FANUC Maximum spindle speed: 20,000 1/min Number of axles: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Number of stacking positions: 24 pieces Machine weight: 6300 kg Equipment: BLUM 3D Workpiece Probe 2022/11: GO Interchangeable Arms Spindle change 2021: Installation of the BLUM workpiece probe 2020: Replacement of drive bearings and bolts on X/Y beams Replacement of caliper lubrication dispensers, new brake caliper covers Replacement of the spindle center cooling reducer

x-travel: 600 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc type: Serie 0-MD mm Tool changer: 16 Pos. spindle taper: ISO: 40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete sawmilling line composed by Hydraulic Carriage, logs turning, cross-cutter and sharpening machine.

Key data: 510 mm, 510 mm, 510 mm

Inv. Num. : 7409 Type: ARROW 500 Producer: CINCINNATI MILACRON Created: 1996 Parameters: Control system: ACRAMATIC A 2100 Number of stacking positions: 21 Work table length: 700 mm Work table width: 520 mm Maximum table load (uniform): 350 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: CAT 40 Machine height: 2650 mm Machine length: 2700 mm Machine width: 2000 mm Machine weight: 3050 kg Equipment: Tool Holder

Hassia Redatron FlexiBag 40/25 vertical form, fill & seal machine for pouches with auger dosing, bag size min. 60 x 50 mm (LxW), max. 400 x 260 mm (LxW), filling volume max. 4.4 litre, max. width of the foil reel 540 mm, maximum diameter of the foil reel 600 mm, electrics 3X230/400 V/50 Hz, capacity up to 150 cycles per minute

x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 1 - 28.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 119 / 85 Nm tool taper: HSK A63 Swivel range milling spindle: B: -10° / +110° ° spindle bearing diameter: 80 mm rotary table:: table diameter: 750 mm rotation range: C: 360 ° rotary speed: max. 100 min/-1 max. table load: 600 kg feeds:: feed speeds: 1 - 90.000 mm/min rapid traverse: 90 m/min Feed force: X/Y: 13,8 kN Feed force: Z: 10,35 kN tool magazin:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 10 kg Workpiece dimension: max. workpiece height: 460 mm Max. Workpiece Area: ca. 750 x 600 mm passage: max. 600 mm total power requirement: 60 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,5 ...

Key data: 1050 mm, 530 mm, 510 mm

Control Mazatrol ... MATRIX 2 Clamping table surface ... 1300x550mm Axis X ... 1050mm Axis Y ... 530mm Axis Z ... 510mm Spindle speed... 10-12000r/min. controlled axes ... 3 cooling... 15bar ISO 40 Max. table load ... 1200kg Magazine slots ... 30 Machine weight ... 7700kg The machine is in good condition, possible to test under electricity.

standing PE tank, sulfuric acid tank. Flat bottom Volume: 16.7 m³ Dimensions: Ø 2.57 m x 3.90 m high

standing GRP tank, polyester tank, with feet Volume: 35 m³ Dimensions: Ø 3.00 m x 5 m high

upright GRP tank, polyester tank, with bottle bottom, with two domes (on top of the tank and on the side of the spout) Volume: 40 m³ Dimensions: Ø 2.90 m x 6 m high

GRP tank standing on the skirt, polyester tank, reinforced, with inner coating with cone at the bottom, possible density: 1.3 kg /l Volume: 30 m³ Dimensions: Ø 2.85 m x 8 m high incl. skirt cylindrical length: 4.70 m

upright stainless steel tank with flat bottom Weight: 3 tons Volume: 43.5 m³ Dimensions: Ø 3.10 m × 6.15 m high

upright stainless steel tank, flat bottom Volume: 15 m³ Dimensions: Ø 2.60 m × 3.40 m high

upright stainless steel tank, incl. agitator Volume: 6 m³ Dimensions: Ø 2.24 m × 2.80 m high incl. agitator, cylindrical height 1.54 m

upright stainless steel tank Volume: 6 m³ Dimensions: Ø 2.40 m × 1.90 m high

upright stainless steel tank, incl. agitator Volume: 3.3 m³ Dimensions: Ø 1.66 m × 2.50 m high incl. agitator, cylindrical height 1.54 m

upright stainless steel tank, bottom with cone. with feet, pressure tank with cooling zones Volume: 2.7 m³

Stainless steel tank, upright, cube Volume: 1 m³ Dimensions: 1.0 m wide × 1.2 m long × 1.60 m high

upright stainless steel tank, with feet Volume: 1.5 m³ Dimensions: Ø 1.10 m × 2.10 m total height incl. feet Feet 30 cm, dome top Outlet under the tank with flange Ø 4.5 cm Outlet at the bottom of the floor Ø 6.5 cm, without tap

Key data: 1120 mm, 345 mm, 400 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 1/min Travel X/Y/Z 1120/345/400 mm Feed range X/Y 16 - 800 mm/min, Z 5 - 250 mm/min Rapid traverse Milling head swivel range +/- 45°, quill stroke 90 mm Connected load approx. 14 kW Incl. coolant device Electric tensioner, bracket cover

Simultaneous 5-axis design - Control system SIEMENS 840 D SL - Working range X= 780, Y= 600, Z= 520 mm - C-axis 360° - B-axis -50°/+110° - Table clamping surface 720 x 540 mm - Spindle speed 20 - 15,000 1/min - Tool magazine 60 places - Tool holder HSK 63A - High-pressure system IKZ 40 bar - Probe 3D Weight 8,100 kg

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

Inv. Num. : 7531 Type: VMC 750 Producer: MAS Created: 2000 Parameters: Control system: VICKERS ACRAMATIC A2100 Work table length: 1000 mm Work table width: 500 mm X-axis travel: 750 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Machine weight: 4000 kg Equipment: Technical Documentation

GRP tank, upright Volume: 23,000 l Dimensions: Ø 2.00 m × 7.50 m high Spout: DN80

Conventional Vertical Lathe O-M TMS2-18/40 Made in 1975. Table size: 1800mm Max swing: 4000mm Max turning height: 1500mm Condition Under power.

Key data: 900 mm, 500 mm, 450 mm

Inv. Num. : 7549 Type: F5 Produzent: MAKINO Erzeugt: 2013 Parametern: Steuerungssystem: FANUC Arbeitstischlänge: 1000 mm Arbeitstischbreite: 500 mm Anzahl der Stapelpositionen: 30 Stücke Anzahl der Achsen: 4 Stücke Maximale Vertikalspindeldrehzahl: 20.000 1/min Verfahrwege X-Achse: 900 mm Verfahrwege Y-Achse: 500 mm Verfahrwege Z-Achse: 450 mm Kegel: HSK 63 F Anzahl aller Werkzeuge: 30 Stücke Ausstattung: IKZ Werkzeughalter

Inv. Num. : 7562 Type: VF2 Produzent: HAAS Erzeugt: 2006 Parametern: Steuerungssystem: HAAS AUTOMATION Arbeitstischlänge: 914 mm Arbeitstischbreite: 356 mm Maximale Tischbelastung (gleichmäßig): 1361 kg Verfahrwege X-Achse: 762 mm Verfahrwege Y-Achse: 406 mm Verfahrwege Z-Achse: 508 mm Spindelleistung: 22.4 kW Maschinengewicht: 3539 kg