veb sachsenwerk dresden used for sale

These are NVA carriages, these were used to transport field kitchens or water barrels. The carriages can be adjusted in height, the previously assembled field kitchens could be set down with the carriage. unbraked, very good condition, 5 pcs and still spare tires. Tyre size 7.50-16 Private sale on behalf of customers. The carriages are ideal for building a wooden wagon / trailer. There are 4 loop points so that you can construct the structure so that you can set it down.

Roller leveler VEB BLEMA GOTHA Germany Strip max thickness 6 mm, max width 1650 mm 7 + 8 work rolls, diameter 110 mm, 3 rows of supports with hydraulic setup, hydraulic unit included 27 kW AC main motor very good condition, complete and ready for operation, still on foundations in our plant

Offer Centrifuge SZB0 1000C 960 1/min 6 loads/h for separation of Plastiso and Parex Photo 1-9 The centrifuge was part of a wallpaper production line. After cleaning the tools, it is used to separate the plastisol from the parex. Manufacturer: VEB Chemieanlagenbau Staßfurt Maschinfabrick Sangerhausen Type: SZB0 1000C Ref. 5604 Year of construction: 1986 Speed: 960 1/min Load: 145 kg Internal volume of the drum: estimated 200 liters Max clearance: 6 loads/h Power supply: 380V 3~ 50 Hz 5.5kW Weight: 1660kg Condition: used, stored, worked until siling and on 7 Paint mixing buckets Mixing tank Agitator tank Drais 300 l Photo 10-12 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories to the Drais paint mixing plant type RN 218 (sold). Technical data (partly estimated or from comparison plants): Manufacturer:  ...

UBR32x2500 sheet metal rolling mill Year of production 1969 Dismantling, transport and all related costs are the responsibility of the buyer

Clamping head VEB Vorrichtungsbau WeißENFELS Type G2 Direct dividing apparatus, partial head, dividing apparatus with collet holder Order No: 31202 Fixture No: TGL 30-07101 Collet holder 163E Height 140 mm Through hole 28 mm Clamping surface 265 x 165 mm - Index detent from 0 to 180 every 15 (12x)- Index detent from 180 to 360 every 45 (4x) - Collet set with 16 pieces Compression collets type 163E - 12 pieces Collets round 6 / 8 / 10 / 12 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28 mm- 3 pieces Collet hexagon 8 / 10 / 14 mm- 1 piece collet square 12 mm- clamping surface with 20 mm guide groove Dimension dividing apparatus L x W x H 265 x 230 x 140 mm Weight: kg good condition; used

diameter: M5/M64 mm weight: / kg Type: / 0 different types available: tapping head GB2 - 150 Euro tapping head GB3 - 250 Euro tapping head GB5 - 450 Euro The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: M12/M30 mm weight: / kg Type: / 0 tapping head M12-M30 with inlays in wooden box. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: VEB GWB Wiesa, milling chuck SK40 -Type: B 40/40 -Number: 5x milling holder available -Price per piece -Dimensions: Ø90 x 170 mm -Weight: 1.9 kg/pc.

control:siemens 1P 6SL 3054--0CE01-1AA0 Documents:vorhanden

total power requirement:16,5 kW weight of the machine ca.:3,8 t

Separator for grain and granular products according to their length VEB - PETKUS K233A-TGL 25895 Trieur battery ø 600 x 2000 with final separation Trieur jackets ø 4,5 / ø 9 Machine in a good condition

Connected load: 5kW, weight: 3t.

Speed: 1000 rpm, weight: 2400 kg. On-site viewing is possible.

Manufacturer: VEB Type: RV16 Machinable cross-section: 120 x 140 mm Weight: 2.7 t

grinding length: 630 mm grinding width: 200 mm workpiece height: 400 mm x-travel: max. 710 mm y-travel: max. 250 mm distance between table/spindle: max. 500 mm table surface area: 600 x 200 mm table speed -stepless-: 2 - 18 m/min cross feed of table continual: 0 - 4 m/min cross feed of table intermittent: 0,2 - 20 mm/Hub grinding wheel size: ø 200 x 20 mm grinding wheel hole diameter: ø 51 mm grinding spindle speed: 2830 U/min grinding wheel motor: 1,1 kW total power requirement: 6,5 kW weight of the machine ca.: 1,4 t Accessories: magnetic plate 600 x 200 mm, DRO on Z-axis, various grinding wheels, 1 grinding wheel with flange, wheel trueing attachment, wet grinding attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, bench grinder, column grinder, column grinder, drill bench grinder -grinding wheel: max. Ø 200 x 32 mm -Speed: 3000 rpm -Motor power: 0.9 KW -Operating voltage: 380 volts -Dimensions: 1100/540/H1140 mm -Weight: 125 kg

Table size X/Y: 900mm/1400mm, control: CNC H 646, travel X/Y/Z/W: 1120mm/710mm/315mm/630mm, spindle diameter: 125mm, spindle speed: 2240rpm, max. table load: 1000kg, dimensions X/Y/Z: 4000mm/2460mm/3030mm, weight: 8800kg. On-site inspection is possible.

chemical pump, water pump, centrifugal pump JENAER GLASWERK Type: KRS 40 / 120 Ras Capacity: 16 m3/h Delivery altitude: 12 m Material pump housing: Glas Connections ( inner diameter ): Ø 40 mm Motor: VEM KMR 100S2 ( KMR100S2 ) 2,2,8 kW 2890 rpm 220 / 380 V 3AC 50 Hz Ex-proof ! used, tested ! Dimensions: 570 x 255 x 310 mm

Connected load: 6kW, weight: 2t.

Anzahl Achsen: 3, rotational speed: 450-2800/min, connected load: 6kW, weight: 2t, including accessories and documentation.

X-travel: 900mm, y-travel: 300mm, z-travel: 380mm, rotational speed: 28-2800/min, feed rate: 10-630mm/min, connected load: 5.8kW, weight: 1.7t, with dividing head, counter spindle, holders, spare parts, various tools, an inspection is possible.

There are three identical machines available, connected load: 0.25/0.37kW, weight: 250kg.

Pressing force: 12.5t, stroke: 8-60mm, stroke speed: 140/min, connected load: 1kW, weight: 1.1t.

Connected load: 4kW, weight: 2t, an inspection is possible.

Ram stroke: 80mm, ram adjustment: 100mm, max. working width: 4750mm, machine needs overhauling.

Max. operating temperature: 300°C, nominal power: 8.55kW, connected load: 9.1kVA, weight: 500kg.

Vacuum chamber volume: 0.62m³, weight: 2800kg, cooling water requirement: 700l/h. On-site inspection is possible.

Output: 25,000l/h, rotational speed: 4750/min, connected load: 22kW, length: 1485mm, width: 1170mm, height: 1728mm, weight: 1.64t, including documentation.

There are two identical filters available, capacity: 11,200l, max. operational temperature: 50°C, weight: 2.5t.

Connected load: 6.2kW, weight: 3t, the machine has an electrical defect.

Hydraulic press PYE 100S1.

Hydraulic press PYE 160SS

- min/ max bending thickness 10/60 mm - bending width 4500 mm - weight of bending rolls 172 t - dimensions L11,19 x W5,08 x H5,6 m

sheet width: 125 mm coil weight: 2x 0,8 t coil internal dia.: 300-500 mm coil outside dia.: 1200 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: BxTxH 2000x2000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Linear drive, linear gear, lifting gear, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, servomotor, adjusting cylinder -Power: 0.2 kW -Adjusting force: 500 N -Stroke: 100 mm -Price: per piece -Number: 2 pieces -Dimensions: 500/180/H215 mm -Weight: 15 kg

Radial fan, chip extractor, fan, suction, chip fan -Motor power: 75 kW -Speed: 1480 rpm -Volume flow: approx. 40,000 m³/h -Total pressure: approx. 1600 Pa -Connection input: Ø 710 mm -Connection output: Ø 710 mm -Dimensions: 2400/1560/H2810 mm -Weight: approx. 1600 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 2750 rpm -Shaft diameter: 14 mm -Construction: B5 -Protection class: IP 54 -Weight: 7 kg

Gear motor, electric motor, three-phase motor, right-angle gear motor -Speed: 100 rpm -Power: 0.75 kW -Construction: B3 -Shaft diameter: Ø 48 mm -Protection class: IP 54 -Weight per piece: 44 kg

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1360 rpm -Shaft: Ø 11 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 180/140/H170 mm -Weight: 5.6 kg

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1360 rpm -Shaft: Ø 11 mm -Construction: B3 -Protection class: IP 54 -Weight: 6 kg

Gear motor, electric motor -Speed: 5000 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 9 mm -Protection class: IP 21 -Weight: 3 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 2750 rpm -Shaft diameter: 14 mm -Construction: B5 -Protection class: IP 54 -Weight: 9.5 kg

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch threaded jaws: 1 - 2 inches -Weight: 12 kg

Crank winch, Dunkraft, diamond jack, steel winch -Load capacity: 10 t -Safety crank -self-locking gear -with profiled head-claw -with a solid claw -Weight: 50 kg

Roller bearings, ball bearings, barrel bearings, bearings, roller bearings -Outer diameter: 240 mm -Width: 80 mm -Inside diameter: 110 mm -Weight 17 kg

Variator Pulley, Vario Adjustment Pulley, Vario Belt Pulley, PIV Gear, Vario Gear, Variable Speed Pulley, Variable Pulley, Expansion Pulley, V-Belt Pulley Adjustable -Manufacturer: VEB, Vario belt pulley -Outer pulley diameter: 220 mm -Inner diameter: 22 mm -Dimensions: Ø220 x 260 mm -Weight: 8 kg

Variator Pulley, Vario Adjustment Pulley, Vario Belt Pulley, PIV Gear, Vario Gear, Variable Speed Pulley, Variable Pulley, Expansion Pulley, V-Belt Pulley Adjustable -Manufacturer: VEB, Vario belt pulley type E 502.22 -Outer pulley diameter: 220 mm -Inner diameter: 22 mm -Dimensions: Ø220 x 140 mm -Weight: 5.4 kg

Lifting, filing and sawing machine, filing trestle, planing machine, planer, stand filing trestle, filing machine -Manufacturer: VEB Ruhla, lifting, filing and sawing machine type SgHFe 230 -Table surface: Ø 400 mm, 4 sides swiveling approx. 15° -Projection: 230 mm -Stroke rate: infinitely variable: approx. 75 - 355 DH/min -Operating voltage: 380 volts -Dimensions: 720/650/H1570 mm -Weight: approx. 338 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, lifting clamp, crane clamp, roller clamp -Manufacturer: VEB TAKRAF, roller clamp type WSI -Clamp range: 35-70mm -Load capacity: 2000 kg -Dimensions: 620/210/235 mm -Weight: 21 kg

Inv. Num. : 6951 Type: BKoE 630x1000 Producer: VEB Generated:- Parameters: Working table length: 1000 mm Working table width: 630 mm Minimum spindle speed: 36 1/min Maximum spindle speed: 2240 1/min Maximum distance between the spindle axis and the table: 20-850 mm Spindle power: 9 kW Machine weight: 5900 kg