ve sifi used for sale

thickness of jaw: 135 mm : 40 mm clamping width: 225 mm weight: 45 kg clamping capacity: 4,8 t dimensions of the machine ca.: 550 x 300 x 140 mm - with turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/min weight of the machine ca.: 230 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale: Vega radar sensor PS61. XXBAEHKMXX Order number: 2653.3 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.

Machine Details Warehouse number 1105-03373 Machine type Konsolfräsmaschine - universal VERNIER brand Type VS 3 Year of construction 1985 Conventional control type Storage location FRANCE Country of origin France Delivery time immediately Freight base from stock Technical details x-displacement 900 mm y-way 300 mm z-way 600 mm Table: 1200 x 300 mm Number of T-slots 3 Number of feeds 18 Feed range 14 - 710 mm/min Rapid path vertical 1 m/min Rapid path longitudinally 3 m/min Speed 45 - 2000 rpm Total power requirement 4 kW Machine weight approx. 2.4 t Information can be folded down to horizontal milling machines with rotatable and swivelling vertical head, Feeds in all 3 axes, DIGITAL DISPLAY DEVICE rapid passages,

Double feed screw completely stainless steel Servings from 5 gr to 60,000 gr Speed up to 700 servings/min. (afhankelijk van darm, caliber, product, enz...) Capacity up to 7,000 kg/h. up to 50 bar 9.5 kW 250 L. funnels with built-in feeding for 200 L. standard wagons

ORDER NO. 7026 TECHNICAL SPECIFICATIONS - inlet width 740mm - inlet height 300mm - shaft width 780mm - shaft diameter 1000mm - knife length 780mm - number of knives 2pcs - sieve dimensions 55x55mm - 4 toothed pulling shafts from the bottom - lower shaft motor 5,5kW - 3 toothed pulling shafts from above - upper shaft motor 5,5kW - belt feeder - feed belt length 4300mm - feed belt width 600mm - belt feed motor 2,2kW - main engine 90kW - reverse gear, - autorewers - overall dimensions of the machine length / width / height 4600x2350x1700mm - overall dimensions of the feeder length / width / height 4550x980x970mm - total weight about 11000kg – German production, – used chipper, very good condition Net price: 295900 PLN Net price: 66494 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

heavy gear, angular gear -Translation: 20: 1 -Drive shaft: 35 mm -Output shaft: 2x 22 mm -Weight: 27 kg

Cam switches, circuit breakers, motor protection switches -Type: 9/12 -220-240 V 1300 W 50-60 Hz -Weight: 1.2 kg

Power resistor, wire potentiometer, resistor -Price: per piece -Number: 7x available -Weight: 0.2 kg

Relay, contactor, semiconductor contactor, contactor -Type: GBR 15.1-12.12 -12 V 6 A 250 V. -Price: per package -Price: complete -Number: 100 pieces -Weight: 1.8 kg

Relay, contactor, semiconductor contactor, contactor -Type: GBR 10.2-11.12 -12 V 8 A 250 V. -Price: per package -Price: complete -Number in one package: 99 pieces -Weight: 1.8 kg

VEMAG FSL-210 ID.NO. 2131 Vemag FSL-210 portioner of, among other things, fresh sausage with automatic sausage cutter. Suitable for natural, Collagen & Cellulose Intestine. Year of fashion 2011 very little used since new. Unusual machine that rarely comes out on the secondary market. Dimensions 205 x 80 cm H 165 cm

Filling station, bagging station for big bag, octabine with material conveying blower Big Bag filling station with conveyor blower for filling regrind or granules in Big Bag 1.5 m³ The Big Bag filling station is robust and easy to handle. The system is ideal for use where dry granules or regrind are to be filled into octabine or big bag. Compact versions have been developed for smaller containers such as small boxes and sacks. These filling stations are ideal for smaller granulators or insert mills to fill smaller quantities of regrind into small boxes or bags. With a sophisticated design and a wide range of combinable options, the filling station can be filled for various bulk materials. The frame and the entire construction is made of sturdy profiled steel materials. Material handling system | Filling station, emptying station for one or two big bag or octabin or for small ...

- Manufacturer: Vega - 1x 1200mm - 2x 900mm - 2x 800mm - 2x 700mm - Price on request from warehouse We receive new items every week. Not all of them are immediately available online. However, if you are looking for something specific, you can simply send us an inquiry or feel free to call us. You can also find more articles on our website. Price per piece ------------- Manufacturer: Vega 1x 1200mm 2x 900mm 2x 800mm 2x 700mm Price on request from warehouse. Price per piece Every week, new items arrive at our facility. Not all of them are immediately available online. However, if you are looking for something specific, you can simply send us an inquiry or feel free to call us. You can also find more items on our website.

Shredding plant / chipper / shredder for shredding wood waste - Waste wood waste - Pallets - Packaging material and waste of many kinds Make: VECOPLAN - MASCHINENBAU Type: VAZ 300/180 Silent and slow-running. Propulsion:132. Kw. Rotor width:1800.mm. Rotor diameter:420.mm.(solid steel.) Rotor speed:80-120 rpm Capacity: 1500-2000.kg/h.je by material and task. Tools-knives ( cutting crowns 80x80 mm ) Sieve: 30.mm. round hole reinforced design Hydraulic strainer and rear flap with lowerable counter knife Conveyor belt cut-out 1000.mm. Insertion: approx. 1800 x 3000.mm. Weight: approx. 18.500.Kg. Included: control cabinet system + hydraulic system + operating instructions + electrical circuit diagrams. Dealer price 34.500.00€ net ex location. The machine is in good general condition

HI-COATER systems are designed for aqueous and solvent film coating processes. They can also be configured for optional sugar processing. Technical data: Length mm 860 Width mm 820 Height mm 1420 Net weight Kg 300 Current AMPS 14 Frequency Hz 60 Voltage Volt 230 Phases 3 Flexible Processing Capabilities. Quick-Change Mounting System. Integral Drain for Rapid Cleaning. Sanitary Mirror-Smooth Finish Pan Interior. Removable precision mixing baffles. Atomization & spray pattern control for consistent coating processes. Easily removable spray bar. Color touchscreen control system. Validatable process control: inlet airflow and pan pressure, exhaust or inlet temperature, spray rate and delivery amount.

This portal crane can be moved all over your workshop floor thanks to the pneumatic hovering system, the requirement to be able to use this is that the floor needs to be perfectly smooth. Max height under lifting hook: 2000 mm Lifting capacity: 5 ton Kind of: portal crane Capacity: 5 ton Span: 4 meter Drop: 2 meter

Load capacity: 2500 kg

Cylindrical roller bearings -Type: NUP 2314 -d = inside: 70 mm -D = outside: 150 mm -B = width: 51 mm

Compulsory mixer, agitator, agitator, mixing tool, stirrer -Nominal consumption: 160 watts -Connection: 380 volts -Dimensions: 200/190/H700 mm -Weight: 14 kg

Machine vise, sturdy vise, drill vise -Jaw width: 160 x 60 mm -Clamping depth: max. 130 mm -Dimensions: 480/160/H135 mm -Weight: 38 kg

Hand punch, hand punch, eccentric punch, hand lever punch, spindle punch, hole punch -Stamp: Ø 8 mm -Dimensions: 600/100/H475 mm -Weight: 13.1 kg

Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt -Thickness: 7.0 mm -Width: 39 mm -Length: 22,000 mm -Number: 1x ribbons available -Price: per piece -Weight: 6 kg

mobile hydraulic pump -on a mobile cart -Operating voltage: 380 volts -with push button

USED STAINLESS STEEL VERSA-MATIC E2 DIAPHRAGM PUMP

USED STAINLESS STEEL VERSA-MATIC E4CA1R110-B DIAPHRAGM PUMP

USED STAINLESS STEEL VERSA-MATIC E4CA1R110-B DIAPHRAGM PUMP

Stainless steel VERSA-MATIC ATEX diaphragm pump

Air Operated Double Diaphragm Pump manufactured by VERSA-MATIC

Stainless steel VERSA-MATIC ATEX diaphragm pump

Air Operated Double Diaphragm Pump manufactured by VERSA-MATIC

Stainless steel VERSA-MATIC ATEX diaphragm pump

USED VERSA-MATIC V2 DIAPHRAGM PUMP

USED PRESSURE TRANSMITTER WITH SPACER RING VEGABAR 81

Air Operated Double Diaphragm Pump manufactured by VERA-MATIC

Characteristics are shown in the photo Without documentation Bought at the Kirov factory in St. Petersburg.

High-performance fan Zenner, type VTZ 710/63/1 special, built in 2014, consisting of control cabinet, frequency converter, cell lock Specifications Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 Special Year of construction: 2014 Volume: 4.72 m³/s Temperature: 20°C Density: 1.2 kg/m³ Total pressure: 5,000 pa Speed: 2900 1/min Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 470 kg The fan is intended for transporting shredded paper/cardboard. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment. ...

VETTER AS16-4.0 1600 KG pillar jib crane was built in Germany in 2014. The lightweight, low-profile design combined with the electric rotation drive guarantees maximum operational comfort and a high lifting capacity for loads with a maximum weight of 1600 kg. All this makes the VETTER ASSISTENT AS pillar crane the ideal solution for many applications in limited spaces, halls and outdoor areas. Technical parameters of VETTER AS16-4.0 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4000 mm - maximum lifting height: 2500 mm - rotation angle: 270° - electric chain hoist - lifting class according to EN 13001: HC2 - stability class according to EN 13001: S2

VETTER AS16-4.0 1.6 T pillar jib crane manufactured in Germany in 2014, is used for unloading, assembly work as well as for machine operation. The combination of a lightweight, low-profile design with a powerful electric drive ensures fast and safe movement of various types of loads with a maximum weight of 1600 kg. This makes the VETTER ASSISTENT AS pillar crane ideal for limited spaces, production facilities and outdoor areas. Technical data of VETTER AS16-4.0 1.6 T pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 4 m - maximum lifting height: 2,5 m - rotation angle: 270° - electric chain hoist - lifting class (EN 13001): HC2 - stability class (EN 13001): S2

Chain milling machine VEB Type KFM Motor power 2.2 kW Table tiltable 30° -0°- 30°, height adjustable, adjustable to left-right Pressure from the front Sword 50 x 150 for chain 12 – 17 mm Dimensions 1100 mm x 1000 mm x H 1620 mm Weight with pallet 511 kg

Format range: 1150 mm, min. 86 mm Equipment: Longitudinal seam, folding floor, double edge, electronic upper glue unit with 2 application heads, Disc upper glue unit, disc glue unit on the left, Pre-crusher right and left, kicker, counter, medium transport in folding, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new Feeder and transport belts equipped.

CATALOG NO. 7241 TECHNICAL DATA - inlet width 450mm - inlet height 230mm - shaft width 480mm - shaft diameter 380mm - number of knives 4 pcs - sieve size 50x40mm - toothed shaft pulling from above and below - shaft motor approximately 2×1.5kW - electric autoreverse - with conveyor belt - feed belt length 2190mm - feed belt width 440mm - front/backward belt feed - feed motor 1.5kW - main engine 30kW - dimensions length/width/height 3730x1670x1200mm - weight 1750kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 76900 PLN Net price: 17089 EUR depending on the price 4.50 EUR Net price: 20237 USD depending on the price of 3.80 USD (Prices may vary with higher fl ...

Machine Details Warehouse number 1105-03598 Machine Type Machining Center - Vertical Brand VERNIER GSP TRENS Type CV 800 Year of construction 1995 Control type CNC Control NUM 1060 Storage location HAGUENAU Country of origin Czech Republic Delivery time immediately Freight base from stock, freely loaded trucks Technical details x-travel 800 mm y-travel 610 mm z-travel 508 mm Table size 1050 X 420 mm Spindle holder ISO 40 Drilling capacity in St 60 - Full drilling 45 mm Thread cutting up to M 24 Speed range - infinitely variable 6000 rpm Feeds - longitudinal/transverse/vertical 1 - 5000 mm/min Rapid traverse 20 m/min Distance spindle/table 100 - 608 mm Number of tool magazine slots 30 Tool diameter with full assembly 80 mm Tool diameter with 2 free spaces 125 mm Tool length max. 380 mm Tool weight max. 7 kg Tool change time 7 sec Spindle 11 kW Control NUM  ...