vdi used for sale

There are two Boley BE42 available, max. machining diameter: 42mm, max machining length: 120mm, max speed main/ counter spindle 8000/ 6000/min, control: Mitsubishi Meldas 635 LCC, weight: 3,3t, operating hours machine 1/ 2: 60.787/42. 200h, including bar feeder, two 12-fold tool turrets with intermediate indexing and driven tools, holder VDI 20, full counter spindle with X- and Z-axis, C-axis spindle 1, C-axis spindle 2, mechanical spindle indexing 15° spindle 2, collet holders spindle 1 and 2, workpiece removal device, milling interpolation, constant cutting speed, synchronous tapping without extractor holder, bar loader Iemca Boss 545, chip conveyor, high-pressure cooling, fire extinguishing system, further collets, tool holders and accessories are available, inspection is possible.

Includes measuring field S-075, calibration plate S, strip projection system LED (blue), 128 LP, lenses, 2x high-resolution 8. 0 MPixel digital camera with GigE interface, 3296x2472 pixels, lenses, filters, optoLINKII controller with USB interface, 10m cable, upgrade to integrated rack computer Intel® Xeon® processor, 64bit, 32GB RAM, 1TB SATA HDD, DVD +/-rw, graphics card, OPTOCAT measurement and evaluation software for Windows, laser pointer, flight case, closed system housing, M rotary/swivel unit with three-jaw chuck, certification for optical measurement system and system acceptance according to VDI / VDE 2634, the machine was hardly used.

NEW MACHINE  - AFFORDABLE and QUALITY SOLUTION Tool changer and C axis are in option. PRODUCT SPECIFICATION A. MACHINE UNITS 1. Work Tank Dimensions 940 x 550 x 350 mm 2. Work Table Dimensions 630 x 360 mm 3. X, Y, Z, Axis Travel 400 x 300 x 300 mm 4. Distance between main axis to table 410 mm 5. Built-in rotational C-Axis Travel 360° ( System 3R or EROWA) Option 6. Max. workpiece weight 500 kgs 7. Max electrode weight 50 kgs 8. Capacity of Dielectric 300 liters 9. Max. Machining speed 420 mm3/min 10. Min. Wear rate < 0.1% 11. The best surface finish VDI No. 0 / Ra 0.08 um 12. Max. Output Current 45A 13. Input Power 3.3 KVA 220/380/440 Volt, 3 Phase, 50 Hz 14. Machine L x W x H 155 x 140 x 225 cm 15. Total weight of machine unit 1450 kgs Packing Dimension CNC-C50E2 &  ...

Tecno-V 30 CNC Motorised NCl, year 2001, Mitsubishi Meldas CNC , 2 turrets, turret 1. 12 stations all motorised, turret 2. 6 stations z-axis only, VDI30, bar passage 42, Bellegrandi collet holder, Lemca Boss 545 loader. Manuals, Machine in production. Very fast.

Monforts RNC7 Type of machine: CNC lathe Manufacturer: Monforts Model: RNC 7 Year of manufacture: 1991 Control: Fanuc Technical data: Travel X/Z 415/1100mm, tool measurement, tailstock, Röhm lathe chuck, spindle speed 4000 min-1, disc turret with VDI60 interface, number of tool places: 12, turning length (max.) 1000mm, revolving Ø over bed (max.) 720mm, revolving Ø over radial slide (max.) 550mm, dimensions: 4930x2790x2200mm without chip conveyor, weight: approx. 12000kg

Vertical band saw machine make MÖSSNER type Rekord SM/ 400Machine -No: 14464, built in 1965Technical specifications:Table size according to the manufacturer: 600 x 600 mmTable tiltable up to: 15°Projection: 400 mmCutting height: 260 mmRoll Diameter: 400mm6 cutting speeds: 12 - 750 m/minSaw band length: 2780 - 2980 mmDrive power approx.: 1.1 kW 380 VDimensions: 1000 x 750 x 1800mmWeight approx.: 340 kgWith- Band saw welding machine IDEAL type BSO 16 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Induction soldering machine FDF Fritz DusseldorfBuilt in 1990 consisting of:1.) Soldering table type LT No. 25-18080.90 built in 1990with 1 lifting station projection: 400 mmDistance table - soldering unit: 650 mmelec. Connection: 380 V, 63 AConnected load: 35 kVADimensions: 1600 x 1200 x 1900 mm2.) Stationary parallel resonant circuit inverter type PSU 30-10Fabr. -No: 65.18601-90Max. Power: 30 kWFrequency range: 8 - 10 kHZConnected load: 41 kVAelectrical connection: 380 VDimensions: 1100 x 1100 x 2200 mm3.) Refrigeration unit VICARB Germany, built in 1987Machine -No: D 1044Operating pressure: 10 barPower: 56 kWWeight approx .: 186 kgDimensions: 1200 x 1200 x 1030 mmTotal operating time so far: 7770 operating hoursequipped with:- adjustable heating time- adjustable heating cycles- adjustable pause timelittle used, in good conditionPrice on request.Delivery: ex warehouse or location free  ...

3-way row drilling machine make KNUTH type KGB 25Year of construction 1996Technical specifications:max.drilling capacity in steel: 25 mmTapping capacity: M 16Spindle mount: MK 3Quill stroke: 150 mm3 spindle speeds: 100 - 2900 rpm.Projection: 225 mmDistance spindle - table: 15 - 470 mmTable L x W: 1300 x 295 mmDrive power: 0.75 kW / 380 VDimensions approx .: 1600 x 800 x 1900 mmWeight approx: 750 kgwith- 3 drill headsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Water-cooled plasma cutting system make MESSER GRIESHEIM type HA 95Machine -No: 4030234Technical specifications:Cutting current at 60% duty cycle: 95 AOperating Voltage: 110VOpen Circuit Voltage:260VPower consumption max.:23 kVAMains connection voltage: 220/380/415/500 VDimensions approx.: 70 x 770 x 850 mmApprox. weight: 160 kgwith- Plasma hand cutting torch PHC 95 with hose pack- without rolesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

MIG / MAG welding machine make DALEX type CGW 302Mash. -No: 756757Welding power of: 30 - 320 ANumber of welding steps: 18Continuous operation: 100% ED 300 AOpen circuit voltage: 19 - 53 Vweldable wire electrodesSteel / stainless steel: 0.8 - 2.0 mmAluminum: 0.8 - 2.0 mmPower factor cos phi: 0.75Duration Maximum current: 24/25 AMains voltage: 3 x 380 VDimensions L x W x H: 750 x 520 x 850 mmWeight approx: 180 kgWith- separate wire feed- Hose package with burner water cooled- Ground cable- Pressure gaugeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

General: Year of construction 2003 Switch-on hours 33,321 h Working hours 10,144 h Control Siemens 840D ShopTurn Travel X 400 mm Z 400 mm Rapid traverse 12 mm/min Spindle: Spindle speed 8,000 rpm Rod passage 32 mm Turning diameter 120 mm Revolver: Number of stations 16-fold Number of driven tools 8 Tool holder VDI16 Dimensions and weight: Dimensions 2.500 x 1.400 x 1.700 mm Weight approx. 2,300 kg Other equipment and included accessories: Tailstock programmable Electronic handwheel Oil mist extraction Preparation for bar loaders

General: Year of construction 1996 Switch-on hours 19,017 h Control Siemens 840D Travel X 400 mm Z 400 mm Rapid traverse 12 m/min Spindle: Spindle speed 8,000 rpm Rod passage 32 mm Turning diameter 120 mm Revolver: Number of stations 12-fold Number of driven tools 6 Tool holder VDI20 Dimensions and weight: Dimensions 2.300 x 1.200 x 1.700 mm Weight approx. 2,300 kg Other equipment and included accessories: Tailstock programmable Preparation of bar loaders

Inv. Num. : 6521 Type: Compact A35 Producer: Kovosvit Generated: 2005 Parameters: bar diameter: 35 mm Maximum main spindle power: 7.5 kW Maximum spindle speed: 7000 1/min Number of CNC controlled axes: 8pcs Length: 2250 mm Width: 1480 mm Height: 1890 mm Weight: 3450 kg Equipment: Bar feeder (3 meters) LNS Sprint 555 Part of the sale: Collets Auxiliary head Polished holders VDI25/ER32 Axis tool holder VDI25 Straight and angled power tool holders Equipping the machine with tools (square 16x16 mm) The feeder is equipped with guide channels, pushers and reducing bushes

Inv. Num. : 6520 Type: Compact A25 Producer: Kovosvit Generated: 2008 Parameters: Control system: Fanuc bar diameter: 22 (26) mm Maximum rod length: 4000 mm Minimum main spindle speed: 50 1/min Maximum spindle speed: 8000 1/min Maximum main spindle power: 5.5 kW Length: 2250 mm Width: 1480 mm Height: 1890 mm Weight: 3400 kg The machine is completed with a guide tube for a 3-meter rod and an internal feed. Included in the sale are: Clamping and feeding collets Auxiliary heads (2x collet / 2x jaw) Collet holder VDI25 Axis tool holder VDI25 Straight and angled power tool holders. Equipping the machine with tools (square 12x12 mm and 16x16 mm)

Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price

Okuma LB35 II CNC Lathe Maximum turning length: 2000 mm Maximum turning diameter : 600 mm 18 inches chuck(SMW) IGF program Machine is in very good condition Turret VDI50 holder Some tools will be given together with the machine All maintenance has been done

Year of construction 2007 Control Siemens 840D Rotational diameter. [mm] 640 Turning length [mm] 1500 Main Spindle: Motor Spindle Technology Speed 5,000 rpm Power 35 kW Torque 370 Nm C-axis 0.001° Bar passage 65 mm Workpiece clamping 3-jaw chuck, Schunk ROTA NCF plus 315-104 Counter spindle: Motor Spindle Technology Speed 5,000 rpm Power 35 kW Torque 370 Nm C-axis 0.001° Bar passage 65 mm Workpiece clamping 3-jaw chuck, Schunk ROTA NCF plus 315-104 Travel in Z 1,500 mm Tool carrier I (X/Y/Z/B): Technology Milling spindle on cross slide Speed 12,000 rpm Power 22 kW Torque 100 Nm Tool holder HSK-A63 Travel X/Y/Z 550/220/1,585 mm Rapid traverse in X/Y/Z 40/24/70 m/min B-axis 240° Tool carrier II (X/Z): Technology Star turret with 12 stations Tool holders VDI40 Tool drive 4,000 rpm, 10.7 kW, 32 Nm Travel in X/Z 225/1,400 mm Rapid traverse in X/R  ...

Inv. Num. : 6670 Type: MASTURN MT 54 Producer: MAS Created: 2003 Parameters: Control system: Heidenhaim TE 4110 MP Max. turning length: 800 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter over support: 310 mm Maximum spindle speed: 3000 1/min Tool head: Duplomatic VDi30 Spindle bore: 80 mm Spindle taper: MORSE 5 Number of tool head positions: 8 Length: 3300 mm Width: 2500 mm Height: 1700 mm Weight: 2600 kg Equipment: Technical Documentation Tool holder Bake

Key data: 250 mm, 285 mm, 5 1/min

Precision CNC Lathe Spinner SB - CNC with Siemens 840D Control PLC missing, parameters & circuit diagrams available The Spinner SB - CNC was built in 1996 and is equipped with a reliable Siemens 840D control system. This precise lathe is ideal for a wide range of applications and is characterized by its high performance. Specifications: - Manufacturer: Spinner - Type: SB - CNC - Year of construction: 1996 - Control: Siemens 840D - Travels: X 250 mm, Z 285 mm Spindle: - Max. speed: 5,000 rpm - Spindle passage: 42 mm Revolver: - Number of stations: 12 - Tool holder: VDI16 Dimensions and weight: - Dimensions: 2.1 m x 0.8 m x 1.6 m - Weight: 1,500 kg The Spinner SB - CNC is in a used, but very neat condition. All functions have been carefully checked, and the machine is fully functional. The SB-CNC spinner is ideal for precise machining in a variety of appl ...

Tool holder driven for index G300 (VDI30) Condition: Used Set consisting of: 10 pieces of straight tool holders (1 piece more as seen in the picture) 14 pcs angle tool holder

Tool holder fixed for Index G300 (VDI30) Condition: Used Set consisting of: 14 pieces of drill rod holder 24 pieces of turning steel brackets 2 pieces of detour

Tool holder collet fixed for index G300 (VDI30) Condition: Used Set consisting of: 14 pieces of drill rod holder 24 pieces of turning steel brackets 2 pieces of detour

Female threaded sleeve, 10 pieces WÜRTH W-VD IG M16 A4 ( W-VDIGM16A4 ) Art.-No.: 0905 411 016 female thread: M16 x 2.0, depth: 40 mm drilling diameter: Ø 25 mm drilling depth: 120 mm Material: Stainless steel A4, For composite armature cartridge system W-VD and WIT injection systems New ! Dimensions ( internal threaded sleeve ): 120 x 22 x 22 mm Dimensions ( packaging ): 150 x 100 x 95 mm

General: Year of construction: 2003 Switch-on hours 27,320 h Control Siemens 840D Travel: X 400 mm, Z: 400 mm Rapid traverse 12 m/min Spindle: Spindle speed 8,000 rpm Rod passage 32 mm Turning diameter 120 mm Revolver: Number of stations 12-fold Number of driven tools 6 Tool holder VDI20 Dimensions and weight: Dimensions: 2,300 x 1,200 x 1,700 mm Weight approx. 2,300 kg Other equipment and included accessories: Tailstock programmable Preparation of bar feeder Parts catcher High-pressure pump Oil mist extraction Tebaron Collet chuck

turning length:1500 mm weight of the machine ca.:6 t tool taper:VDI40 transport dimensions LxWxH:3,9 x 2,0 x 2,5 m Spindle running hours : 23149

Hollow spindle opening diameter: 42mm, rotational speed: 56-5600/min, controls: SYSTEM TX 8F, length: 2498mm, width: 1990mm, height: 2005mm, weight: 3.8t, operational hours: 38,274h, with driven tools, various tool holders VDI30, high pressure pump, the Drive Baumüller BUH-4-55-6-002 shows an error message and has to be overhauled.

Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.

turning diameter: 460 mm turning length: 1500 mm control: Sinumerik 840D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Sinumerik 840D cnc control 3-jaw chuck SMW diameter 315mm driven tools C-axis Y-axis 12-fold revolver (VDI50) tail stock chip conveyor coolant device Technische Daten: / technical details max. Schwingdurchmesser / max. rotary diameter 800 mm max. Drehdurchmesser / max. turning diameter 460 mm max. Drehlänge / max. turning lenght 1500 mm X-Achse / x-axis 360 mm Z-Achse / z-axis 1580 mm Y-Achse / y-axis -55 / +65 mm Spindelbohrung / spindle hole 77 mm Drehzahl Spindel / spindle speed spindle 4000 UpM / rpm Drehzahl angetr. Werkzeuge / speed of driven tools 4000 UpM / rpm Anzahl der Revolverplätze / number of tool places 12 Eilgang X,Z / rapid feed X,Z 15/24 m/min Antriebsleistung Spindel (60%/15%ED) / d ...

- max turning diameter : 400 [mm] - max. turning length : 160 [mm] - min. turning length : 29 [mm] - strokes (X/Y/Z) : 820 / 315 [mm] - max. trust on X and Z : 1100 [daN] - main motor power : 71 [kW] - working feeds : 0 - 11.000 [mm/min] - quick feeds (X/Z) : 40 / 30 [m/min] - ball screw diameter (X/Z) : 50 / 40 [mm] - chuck rotation speed : 0 - 4000 [rpm] - chuck maxi torque : 750 [Nm] - Number of positions on turret : 12 - type of tool holders : VDI50 - dimensions (W x L x H) : 4.78 x 1.79 x 2,94 [m] - weight : 10 [t] - power settled : 45 [kW] - electrical supply : 400 V, 50 Hz Equipment - NC SIEMENS 840D - C axis - turning tools - 3 jaws chuck SMW Autoblock Ø400 - contact part sensor Marposs - lubricating tank - cooling pump - chips conveyor - a lot of tools

Technical parameters Maximum turning length (travel in the Z axis): 540 mm Maximum turning diameter over bed: 530 mm Spindle bore: 65 mm Maximum turning diameter over carriage: 300 mm Maximum travel length in the X axis: 245 mm Maximum X-axis feed rate: 16 m/min Maximum feed rate of the Z axis: 24 m/min Maximum power of the main spindle: 11 kW Maximum rotation of the main spindle: 4500 1/min Lathe length: 3000 mm Lathe width: 1900 mm Lathe height: 1800 mm Lathe weight: 4.5 t Total number of tools in the VDI40 turret: 12 Tool measuring probe. Sleeve holder + sleeves in a full range of sizes. Additional jaw chuck. Free: Lots of VDI40 holders. Chip ejector Full documentation The machine did most of its work with plastic elements.

turning diameter: 432 mm turning length: 864 mm control: HAAS spindle taper:: c-axis: bar capacity: 76 mm spindle turning speed - stepless: 30-3400 U/min Top turret tool hodler:: VDI40 weight of the machine ca.: 7.3 t dimensions of the machine ca.: 4.0x2.2x2.0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: SIEMENS 840D Max.turning length: 450 mm Max swing diametr over bed/Slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l M

Control: Heidenhain Max.turning length: 450 mm Max swing diameter over bed/slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l Ma

Control: SIEMENS 840D Max.turning length: 350 mm Max swing diameter over bed/slide: 320 mm/152mm Workpiece diametr: 310 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:8 Taper ? VDI20 Coolant tank:80l p

Control: SIEMENS 840D Max.turning length: 350 mm Max swing diameter over bed/slide: 320 mm/152mm Workpiece diameter: 310 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:8 Taper ? VDI20 Coolant tank:80l

turning diameter: 400 mm turning length: 650 mm control: Sinumerik 840D sl total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Sinumerik 840D sl CNC Steuerung 3 Backenfutter angetriebene Werkzeuge Sinumerik 840D sl CNC control 3-jaw chuck driven tools c-axis Y-axis 16-fold revolver (VDI30) tail stock chip conveyor coolant device Technische Daten: / technical details max. Drehdurchmesser / max. turning diameter 400 mm Drehlänge / turning length 650 mm X-Achse / X-axis 275 mm Z-Achse / Z-axis 700 mm Y-Ache / Y-axis +50/ -40 mm Spindelbohrung / spindle hole 65 mm Drehzahl Spindel / spindle speed 4000 UpM / rpm Drehzahl angetr. Werkzeuge / speed of driven tools 5000 UpM / rpm Anzahl der Revolverplätze / numbers of tool places 16 Antriebsleistung Spindel 100/40%ED / drive capacity spindle 100/40%ED 14/18 kW Gewicht ca. / weight ca ...

Key data: 160 mm, 400 mm

Type smile 400 VSM400-00475 Year of construction 2004 Travel X 160 mm Z 400 mm Diameter 320 mm Longitudinal measuring range 400 mm Measuring diameter 320 mm Other equipment and accessories: Adapter from SK50 -> SK40 Adapter from SK50 -> VDI30 Adapter from SK50 -> HSK63 Software Zoller DNC manager Vers. 1.04.2

Year of construction: 2009 Condition: good (used) Turning length: 1,000 mm Turning diameter: 650 mm Equipment: Documentation/Manual Okuma LU-45 MC-1000, control OSP P200L, turning length 1000 mm, double turret VDI50, A-turret with driven tools 12 pieces, B-turret 10 tool positions, tailstock, touch setter, gradation for oil mist, door automatic, belt filter system with coolant cooling, tool package Footprint 4800 x 3400 mm Delivery: free loaded truck 100% payment before loading upon invoicing. Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, inspection in our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and subsequent service. We operate Okuma CNC service throughout Europe both electronically  ...

Key data: 380 mm, 500 mm, 6000 1/min

CNC machine Monforts type RNC 5 The RNC 5 was in operation until September, in good condition, immediately available. Specifications - max length to rotate : 500 [mm] - max diameter to rotate : 380 [mm] - Spindle motor : 15 [kW] - Rotation speed : 6000 [rpm] - Number of VDI30 tools on turret : 12 - Rod passage : 65 [mm] Accessories - CNC FANUC 11T control - Pincer chuck -Conveyor The machine can be viewed at any time.

Key data: 380 mm, 500 mm, 6000 1/min

CNC machine Monforts type RNC 3 The RNC 3 was in operation until September, in good condition, immediately available. Specifications - max length to rotate : 500 [mm] - max diameter to rotate : 380 [mm] - Spindle motor : 15 [kW] - Rotation speed : 6000 [rpm] - Number of VDI30 tools on turret : 12 - Rod passage : 65 [mm] Accessories - CNC FANUC 11T control - Pincer chuck -Conveyor The machine can be viewed at any time. Free loading. Transport possible throughout Europe If you have any questions, just write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Tel. 016096679844 Technical specifications are non-binding. Errors excepted.

Key data: 380 mm, 500 mm, 6000 1/min

CNC machine Monforts type RNC 3 generally good condition, but currently not ready for use due to a defective electric motor. The machine has always been serviced and was in operation until recently. Sold as a spare parts donor. Specifications - max length to rotate : 500 [mm] - max diameter to rotate : 380 [mm] - Spindle motor : 15 [kW] - Rotation speed : 6000 [rpm] - Number of VDI30 tools on turret : 12 - Rod passage : 65 [mm] Accessories - CNC FANUC 11T control - Pincer chuck -Conveyor The machine can be viewed at any time. Free loading. Transport possible throughout Europe If you have any questions, just write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Tel. 016096679844

This machine has been completely rebuilt: All wear parts replaced New paint job New machine lighting New control system on Heidenhain Networking General: Type PD-CNC Year of construction 1996 Control Heidenhain manual plus 620 Travel X 400 mm Z 400 mm Q 400 mm Main Spindle: Spindle speed 5,000 rpm Spindle passage 42 mm Turning diameter 120 mm Counter spindle: Spindle speed 5,000 rpm Revolver: Number of stations 16-fold Number of driven tools 8 Tool holder VDI16 Dimensions and weight: Dimensions: 2,300 x 1,200 x 1,700 mm Weight approx. 2,300 kg

DOOSAN Z340SM Double mirror / double turret / C1 + C2 - Axis - Driven / CNC Milling Center, Control: Fanuc Series 18 - T, Note: With the exception of the A6 collets on the lathe, On request, 2 pieces of 10-inch mirrors can be supplied. Upper spindle speed 50 - 5000 rpm Lower spindle speed 60 - 6000 rpm Upper tool holder 12 pieces Lower tool holder 12 pieces The weight of the machine is 6,000 kg Lathe accessories. Chip conveyor Pumpali Too: 4 VDI40 driven tool holders and Live molds are available for 2 VDI40 C-axes. In the picture is the German-made 1800 mm driver with loading magazine,

Angelini DG 13 Manufacturer: AVM Angelini Model: Torino CNC Type: DG 13 Year of construction: 06/2002 Spindle speed: 3000 rpm Control: Fanuc Digital 21i Chuck Diameter: KNCS-N-260-72 Jaw Quick Change Power Chuck Rod Passage: 67mm Head: 12-speed, VDI40 Duplomatic Equipment: controlled quill Other: The machine is under power and can be viewed by appointment

Control: CNC SIEMENS SINUMERIK 840D with DMG MORI SLIMLine Multi-Touch Control Max. workpiece diameter: 700 mm Max. workpiece length: 1,240 mm Max. bar clearance: 80 mm Max. X-axis: 308 mm Max. Z-axis: 1,240 mm Driven tools VDI40 Spindle speed: 3,250 rpm Tool speed 4,000 rpm. 3- Jaw chuck Kitagawa B-210 Hydr. tailstock, handwheel, chip conveyor, extraction system, door automation, High Pressure Pump

This EMCO HYPERTURN 65-1300 DUOTURN CNC Turn-Mill Center was built in the year 2018 in Austria. It is equipped with a SIEMENS Sinumerik 840D SL Control and 2 turrets including milling drive and 2 Y-axes. This highly productive CNC turning/milling center is perfect for the complete machining of turned and milled parts with 1300 m spindle distance. It has integrated spindle motors (ISM) on the main and counter spindles with a spindle speed range from 0 - 5000 min-1. This complete center features 2x 12-fold tool turret radial with directional logic for up to 2x 12 driven tool stations (swivel speed adjustable with feed switch). It comes with several extras from MT65/HT65 BigBore77 to BMT turret (top right) with direct drive for HT65DT/HT65TT/MT65 (the VDI30 standard turret is replaced by a BMT turret with BMT55P precision interface). See original PDF (German) with all positions attached. Ch ...

This used 3-Axis lathe manufactured in 2011 features a FANUC SERIES 21I-TB control, with a max. turning diameter of 250 mm and tools type VDI40. It supports X-axis movement up to 340 mm at 90m/min and Z-axis up to 215 mm at 60m/min. The Famar Pronto 6s dimensions are 2715x4275x2558 mm, and it weighs 10,000 kg. This precision and robustness make the Famar Pronto 6 machine we have for sale ideal for high-performance machining tasks. For more details, please contact us to explore this opportunity further.

:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mm swing diameter:550|650|1000|1250 mm turning height:450|500|750/950|1000 mm spindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/min Travel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mm Travel of ram (horiz.):300|340|500|700 mm rapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/min Tool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kW Machine height:2600|2910|4020|4605 mm weight of the machine ca.:4500|6000|13000|18000 kg hydraulic motor:2,2 kW servo motor X-axis:1,6|1,6|4|7 kw servo motor Z-axis:3|3|7|7 kw coolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW :35|40|50|70 kva CNC controller:Siemens/Fanuc/Fagor CNC controls from:Si ...

turning diameter:180 mm swing diameter:340 mm total power requirement:65 kW weight of the machine ca.:120 t dimensions of the machine ca.:4,2 x 1,6 x 3,0 m max. workpiece weight:20 kg max. X-axis travel:450 mm max. Z-axis travel:300 mm chucking diameter:210 mm spindle distance:750 mm spindle bore:52 mm worktool system:10-fach VDI40 worktool system:8-fach Capto C5 (optional) 2-spindle