vanderlande 600mm 750mm used for sale

Grinding length: 1350 mm Grinding width: 600 mm Grinding height: 600 mm Wheel diameter: 355 mm CNC Brand: _Unknown / Other CNC Model: PROTH Surface grinderPROTH - PSGC 60120 AHR MACH-ID 8523 Make: PROTH Type: PSGC 60120 AHR Control: PROTH Year: 1997 X - Travel:              1350mm Y - Travel:              600mm Z - Travel:              600mm Table Length:            1200mm Table Width:             600mm Feed rate X-Axis:        200mm/min. Feed rate Z-Axis:        200mm/min. Grinding stone dimensions:355 x 50 x 127mm Power:                   7,5kW Speeds:                  ...

Key data: 350 mm

From insolvency: Light Alloy Circular Saw Mep Cobra 352 MA Year of construction 2018 Saw blade diameter 350mm 2 pneumatic material clamps I2qszckei Coolant system Roller conveyor left 1800mm Stop right 600mm 2 sawing speeds 1700 / 3400 rpm Mitre cuts li + re 40/45° Shifter cuts up to 45° 380 volts 2.2KW + 1 pc newly ground saw blade Replacement stop jaws Capacity Cutting range ROUND 0°: 120 mm Cutting range AROUND 45° left: 120 mm Cutting range AROUND 45° right: 110 mm Cutting area SQUARE 0°: 105 mm Cutting area SQUARE 45° left: 100 mm Cutting area SQUARE 45° right: 95 mm Cutting area FLAT 0°: 180 x 70 mm Cutting area FLAT 45° left: 135 x 60 mm Cutting area FLAT 45° right: 135 x 60 mm Cutting range inclined ROUND 45°: 50 mm Cutting range SQUARE 45° inclined: 50 mm Cutting area FLAT 45° inclined: 160 x 35 mm / 180 x 20 mm

Turning diameter: 1100 mm Turning length: 3000 mm Turret positions: 1 CNC Brand: Siemens CNC Model: SIEMENS 810D Manual Turn CNC latheWEILER - E 110 / 3000 MACH-ID 8510 Make: WEILER Type: E 110 / 3000 Control: SIEMENS 810D Manual Turn Year: 1996  Swing over bed Ø:        1100mm Swing over cross slide Ø:830mm DBC Turning Length:      3000mm Spindle bore:            128mm Spindle power:           45kW Bed width:               600mm Tailstock spindle Ø:     140Ø Spindle taper:           6Mk Workpiece weight:        8000 Speeds / ranges:         1120Rpm Feed rate X-Axis:        10000mm/min. Feed rate Z-Axis:    & ...

Description: the machine needs a finding, serial number 1598, pressing force 2000 KN, stroke 250 mm, bending length 3000 mm, numerical control CYBELEC, without accessories Foundation: 600mm deep pit, Lg 3200 x 250mm - must support a weight of 16T300 distributed over four points. weight approx.: 13,000 kg, Approx. Onsite Dimension. (l x w x h): 3,600 x 2,200 x 3,300 mm

Description: Equipment: semi-automatic with digital control Special equipment: pneumatically retractable stop pins pneumatic ejector pin Print format: max. 400mm x 600mm Vacuum area: 405mm x 600mm Vacuum table: 500mm x 700mm Frame format: max. 700mm x 800mm Frame profile: max. 25mm - 54mm Print material thickness: max. 300mm Cycle output: max. 800p/h Connection: 3x 400 V/50 HZ Operating pressure: 6 bar Power: 1,540W Adjustable printing speed: 0 - 835 mm/sec. Lubrication and cleaning every 3 months, V-belts replaced annually Approx. Onsite Dimension. (l x w x h): 1,250 x 940 x 1,580 mm, weight approx.: 400 kg

Drilling capacity: 32 mm Drilling depth: 1000 mm Spindle taper: 50   Number of heads: 1   CNC Brand: Heidenhain Deep hole drilling machineDEGEN - UTB 1000 H CNC MACH-ID 8511 Make: DEGEN Type: UTB 1000 H CNC Control: HeidenHain TNC 124 Year: 1999 Max. drill Ø steel:     5 - 32mm Drilling depth:         1000mm X - Travel:             1300mm Y - Travel:             600mm Z - Travel:             1000mm W - Travel:             500mm Table load:             5000 Table size L x W / or ø:1400 x 800mm Spindle taper:          Sk-50Mk Power on spindle:       10kW Speeds / ranges:        0  - 4000 ...

Description: Equipment: semi-automatic with digital control Special equipment: pneumatically retractable stop pins pneumatic ejector pin Print format: max. 400mm x 600mm Vacuum area: 405mm x 600mm Vacuum table: 500mm x 700mm Frame format: max. 700mm x 800mm Frame profile: max. 25mm - 54mm Print material thickness: max. 300mm Cycle output: max. 800p/h Connection: 3x 400 V/50 HZ Operating pressure: 6 bar Power: 1,540W Lubrication and cleaning every 3 months, V-belts replaced annually Approx. Onsite Dimension. (l x w x h): 1,250 x 940 x 1,580 mm, weight approx.: 400 kg

Table length: 4680 mm Table width: 750 mm Longitudinal X: 4200 mm Cross Y: 750 mm Vertical Z: 695 mm Positions ATC: 33   CNC Brand: Heidenhain Bed type milling machineHedelius - Tiltenta T7-4200 MACH-ID 8502 Make: Hedelius Type: Tiltenta T7-4200 Control: HeidenHain iTNC 530 Year: 2014 5 Axis Simutenious Machining Heidenhain iTNC 530 Heidenhain HR 410 handwheel Formingstar feed motor with Cyclus 320 ( vario Dynamic) Coolant tank 900 Liter  M&H 3D measuring probe Pendel screen  Direct Heidenhain scales   X - Travel:               4200mm Y - Travel:               750mm Z - Travel:               800mm A - Axis:                 - 98 to + 98° B - Axis:  &nb ...

Sheet thickness: 160,00 mm Bending length: 4100 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: CNC CONTROL 4 roll plate benderSertom - RIMI 4RV BULLI MACH-ID 8500 Make: Sertom Type: RIMI 4RV BULLI Control: CNC CONTROL Year: 2015 Rolling width:                 4100mm Rolling thickness 3x toproll Ø:145mm Rolling thickness 5x toproll Ø:160mm Rolling thickness prebending:  120mm Top Roll Ø:                    1150mm Bottom Roll Ø:                 950mm Side roll Ø:                   750mm Number of rolls:               4 Rolling speed:                 0 - 8 Top support:  & ...

Description: Equipment: semi-automatic with digital control Special equipment: pneumatically retractable stop pins pneumatic ejector pin Print format: max. 400mm x 600mm Vacuum area: 405mm x 600mm Vacuum table: 500mm x 700mm Frame format: max. 700mm x 800mm Frame profile: max. 25mm - 54mm Print material thickness: max. 300mm Cycle output: max. 800p/h Connection: 3x 400 V/50 HZ Operating pressure: 6 bar Power: 1,540W Lubrication and cleaning every 3 months, V-belts replaced annually Approx. Onsite Dimension. (l x w x h): 1,250 x 940 x 1,580 mm, weight approx.: 400 kg

Turning diameter: 730 mm Turning length: 2000 mm Turret positions: 1 CNC Brand: Siemens Teach-in latheWEILER - E 110 / 2000 MACH-ID 7777 Make: WEILER Type: E 110 / 2000 Control: Siemens Sinumrik Year: 1997  Swing over bed Ø:        1100mm Swing over cross slide Ø:730mm DBC Turning Length:      2000mm Spindle bore:            128mm Spindle power:           55kW Bed width:               600mm Tailstock spindle Ø:     140Ø Stroke pinole:           300mm Spindle taper:           6Mk Workpiece weight:        5300 Speeds / ranges:         1120Rpm Feed rate X-Axis:        7000mm/min. Feed rate Z ...

Description: Equipment: semi-automatic with digital control Special equipment: pneumatically retractable stop pins pneumatic ejector pin Print format: max. 400mm x 600mm Vacuum area: 405mm x 600mm Vacuum table: 500mm x 700mm Frame format: max. 700mm x 800mm Frame profile: max. 25mm - 54mm Print material thickness: max. 300mm Cycle output: max. 800p/h Connection: 3x 400 V/50 HZ Operating pressure: 6 bar Power: 1,540W Lubrication and cleaning every 3 months, V-belts replaced annually Approx. Onsite Dimension. (l x w x h): 1,250 x 940 x 1,580 mm, weight approx.: 400 kg

Longitudinal X: 12000 mm Radius: 1 mm Drilling capacity: 600 mm Spindle taper: 500   CNC Brand: _Unknown / Other CNC Model: R&D MTC 4 2007 New  CNC MTC 4 ( Open Loop Heavy Duty Machining) New wire / cable / engines / measuring systems Jogging mode with deep hole drilling modus Boring cyclus with return pulling and pause positioning Camera function visulising drilling proces Equipped with: Drilling boring shaft 178 / 238 / 346 / 500 mm (threading connection) Steady rest for diameter 300 / 480 / 760 / 1050 mm Drilling head BOZA Pull Boring Drilling head BOZA BTA Drilling Drilling head BOZA Counterboring Max. drill Ø steel:600mm Drilling depth:    12000mm Table load:        63 Ton supported Power on spindle:  129kW Speeds / ranges:   355Rpm Length:            38000mm Width:    & ...

Depth filter cartridge for the retention of particles and microorganisms. The Sartopure IND filter cartridges were developed for use in prefiltration. The filter matrix consists of several polypropylene filter tiles. These are specially matched to each other so that maximum filtration performance can be achieved.   Typical areas of application for Sartopure IND filter cartridges: - Particle filtration - Industrial applications - Water treatment Separation efficiency: 0.65 μm Adapter type: 25 Height: 30 (750mm) More then 300 machines new and second hand on our seema .de

Complete solution for the transport of bulk materials such as shredded material, wood chips, wood pellets, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm (customizable) Rising area 5,000mm (customizable) Angle in bend 35, 40 or 45° Feed height: horizontal (individual) Drop height individually adjustable Construction: height-adjustable (to be moved) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Propulsion: Motor 1.1KW ( adjustable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 cleats - 400mm pitch 2-ply particularly transversely stable Permanently mounted overbelt magnetic  ...

Turning diameter: 600 mm Turning length: 560 mm Turret positions: 12 CNC Brand: Siemens incl. LNS Bar feeder QLS 80 S2 incl. Large tooling package incl. tool eye incl. part catcher Max. turning Ø:         600mm X-Axis:                 205mm Y-Axis:                 105mm Z-Axis:                 560mm Spindle bore:           76mm Speedrange:             4500Rpm Positions lower revolver:12 Speed live tools:       6000Rpm Power live tools:       3,7kW Pinole taper:           4Mk Stroke pinole:          80mm Quill Ø:            ...

Description: 0-600mm Reading 0.01 - Double column gauge with rod and slider in hardened stainless steel, slider with micrometric screw, Stable and dimensioned support base, Groove for a better grip, Hard metal tracing tip, Liquid crystal indicator with mm / conversion INCH, Automatic switch-off, Accuracy according to DIN862 and UNI-ISO 6906. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 940 x 320 x 380 mm, weight approx.: 6 kg

Description: 0-600mm 0.01, Digital scrapers with micrometric screw, Chromed stainless steel, On / off - zero - mm / inch - ABS - hold - preset +/-, Tip with carbide insert The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 855 x 390 x 295 mm, weight approx.: 11 kg

Description: 0-600mm Reading 0.01 - Double column gauge with rod and slider in hardened stainless steel, slider with micrometric screw, Stable and dimensioned support base, Groove for a better grip, Hard metal tracing tip, Liquid crystal indicator with mm / conversion INCH, Automatic switch-off, Accuracy according to DIN862 and UNI-ISO 6906. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 940 x 320 x 380 mm, weight approx.: 6 kg

Description: SAOM model P5 pantograph, manual use, 600mm outreach, hp 4 motor with frequency converter Approx. Onsite Dimension. (l x w x h): 1,300 x 800 x 1,700 mm, weight approx.: 600 kg

This 4-Axis KUNZMANN BA 1000/810 Vario milling machine, manufactured in 2013, features advanced technology including a Walter with AMF zero point system and an IKZ 25 bar. It offers a broad travel range with X at 1000mm, Z at 800mm, and Y at 600mm. Equipped with a high-performance milling spindle and a spindle speed of 12000 rpm, it ensures precise and efficient operations. The machine also includes a 3D probe and an accuracy package with a direct measuring system in all axes. Reach out for more information about this milling machine.

Description: Equipment: semi-automatic with digital control Special equipment: pneumatically retractable stop pins pneumatic ejector pin Print format: max. 400mm x 600mm Vacuum area: 405mm x 600mm Vacuum table: 500mm x 700mm Frame format: max. 700mm x 800mm Frame profile: max. 25mm - 54mm Print material thickness: max. 200mm Cycle output: max. 800p/h Connection: 3x 400 V/50 HZ Operating pressure: 6 bar Power: 1,540W Lubrication and cleaning every 3 months, V-belts replaced annually Approx. Onsite Dimension. (l x w x h): 1,250 x 940 x 1,580 mm, weight approx.: 400 kg

Description: semi-automatic with digital control Special equipment: pneumatically retractable feed pins Print format: max. 400mm x 600mm Vacuum area: 405mm x 600mm Vacuum table: 500mm x 600mm Frame format: max. 700mm x 800mm Frame profile: max. 25mm - 54mm Print material thickness: max. 300mm Cycle output: max. 800p/h Connection: 3x 400 V/50 HZ Operating pressure: 6 bar Power: 1,600W Lubrication and cleaning every 3 months, V-belts replaced annually Approx. Onsite Dimension. (l x w x h): 1,250 x 940 x 1,580 mm, weight approx.: 400 kg

Description: Equipment: semi-automatic with digital control Special equipment: pneumatically retractable feed pins Print format: max. 400mm x 600mm Vacuum area: 405mm x 600mm Vacuum table: 500mm x 600mm Frame format: max. 700mm x 800mm Frame profile: max. 25mm - 54mm Print material thickness: max. 300mm Cycle output: max. 800p/h Connection: 3x 400 V/50 HZ Operating pressure: 6 bar Power: 1,500W Lubrication and cleaning every 3 months, V-belts replaced annually Approx. Onsite Dimension. (l x w x h): 1,250 x 940 x 1,580 mm, weight approx.: 400 kg

Description: fork size 560x1150mm load center of gravity 600mm power 0.75KW battery voltage 24V battery 71Ah-5hr 230V internal charger lifted mast height 3435mm turning radius 1490mm emergency stop battery percentage dual chain emergency button Approx. Onsite Dimension. (l x w x h): 1,710 x 820 x 1,980 mm, weight approx.: 575 kg

Description: fork size 560x1150mm load center of gravity 600mm power 0.75KW battery voltage 24V battery 71Ah-5hr 230V internal charger lifted mast height 3435mm turning radius 1490mm emergency stop battery percentage dual chain emergency button Approx. Onsite Dimension. (l x w x h): 1,710 x 820 x 1,980 mm, weight approx.: 575 kg

Description: fork size 560x1150mm load center of gravity 600mm power 0.75KW battery voltage 24V battery 71Ah-5hr 230V to load lifted mast height 39350mm turning radius 1490mm emergency stop battery percentage dual chain emergency button Approx. Onsite Dimension. (l x w x h): 1,710 x 820 x 2,230 mm, weight approx.: 597 kg

This 4-Axis Daewoo ACE-HP 4000 vertical machining centre was manufactured in 2006, controlled by a FANUC Series 18i-MB system. It features comprehensive travel dimensions: 600mm in X, 560mm in Y, and 565mm in Z, along with table rotation capability. The machine is equipped with spindle cooling, a chip conveyor, and external workpiece cooling, ensuring optimal operation. A robust choice for precision machining, it combines extensive operating hours with dependable performance. Reach out for further details regarding this vertical machining centre.

Side seal bag machine for carrier bags with glued-in grip hole reinforcement (patch handle). servo machine. The machine is ready for transport, new backup batteries have been installed. Max. welding width: 850mm Min. Feed: 200mm Max. feed: 600mm Max. power: 150 pc/min Main voltage: 400V Control voltage: 230V Connected load: 42 KVA Pre-fuse: 80 A

The Siemens 840D sl CNC manages the 15 axes that drive the machine with full electric technology, ensuring maximum precision during the bending phase. Equipped with latest generation absolute servomotors with integrated feedback and diagnostics, this impressive tube bender boasts a large vertical excursion (950 mm) which allows the accommodation of multiple levels of equipment. Rigidity and precision make it capable of bending very thick pipes (6/8 sch.80). Despite its imposing size, the 225HE has extremely low energy consumption, thanks to the Green Power philosophy and the Full Electric technology of its components. Its ergonomic configuration guarantees the operator maximum comfort in carrying out his tasks. The machine is equipped with three-dimensional graphics software on a 19 LCD Touch screen, through which the operator can program it intuitively. The UII User Iso Interface also ...

General SKU316S537 LocationBarneveld MakeGericke Typeingredënten dosering Main Features MaterialStainless steel Motor0.55 KW Inlet diameter250 mm Specified Features - Metering screw Metering screwcheck Screw diameter85 Pitch85 Shaft diameter21 Screw length600mm With hoppercheck InletDia: 250mm(2x), Dia: 100mm, 150x150mm OutletDia 145 and 100mm (3x) With motor0,55kW, 400Volt, 1400rpm Screw speed10,5-104 rpm Metering screws MaterialStainless steel 1.4571 (316Ti) Information Year of construction2010 Mounted on framecheck Floorspace2,3x2,1m Total height3,1m CEcheck Weight1000kg Extra Specificationsfitted with Gericke DBW-300 metering belt specifications: length: 1800mm width: 300mm this dosing unit includes 3 dosing screws: #1 Screw Dia: 85mm pitch: 85mm Length:600 with ribbon mixer:± 165mmx75, Length :250mm #2 screw Dia: 40mm pitch: 30mm length:600mm with rib ...

3D coordinate measuring machine Renishaw - Swivel Head Granite slab 1500 x 900mm, Z-axis approx. 600mm Measurement software: Tutor with PC

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium flat conveyor belt without substructure Horizontal area 6,000mm (customizable) Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable, machine feet Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PVC conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control Scalloped edge: 80x50mm flush with both sides Centrally welded T75 studs 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently approx. 2-3 w ...

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium flat conveyor belt incl. substructure Horizontal range 5,000mm (customizable) Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable, machine feet Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Scalloped edge: 80x50mm flush with both sides 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is curr ...

Description: Electric lift truck OMG RANIERO model LOGOS , CE compliant: - forks L=600mm + extensions L=1100mm - lifting height H=2900mm - rated capacity Kg 500 - complete with battery charger Approx. Onsite Dimension. (l x w x h): 1,500 x 1,100 x 2,000 mm, weight approx.: 900 kg

Aluminium Z conveyor belt incl. mobile substructure Horizontal range 800mm (customizable) Rising range 2,000mm (customizable) 2. Horizontal range 800mm (customizable) Angle in the bend variable, infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW ( customizable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 Cleat - 400mm pitch 2-layer particularly transversely stable The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies  ...

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure Horizontal range 2,500mm (customizable) Rising range 4,000mm (customizable) Angle in the bend freely infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable (can be moved) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x30mm T-40 Cleat - 300mm pitch 2-layer particularly transversely stable We always have va ...

Description: 5,705 KWp New solar modules 2x Canadian Solar CS3L-360MS, 1x Longi LR4-60HPB-360M, 1x Jolywood JW-HD120N-380, 3x Denim M2B375BT620H, 2x Longi LR4-60HPH-375M, 3x Risen RSM40-8-390MB, 3x URECO FBK400MFD solar modules packed ever 15 solar modules on a pallet. Pallet NO. 3 Nominal power per solar module: 360 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,770 mm x 1,048 mm x 35 mm, 1,754mm x 1,037mm x 34mm, 1,756mm x 1,038mm x 35mm, 1,754mm x 1,037mm x 35mm, 1,254mm x 1,038mm x 35mm, 1,750mm x 1,095mm x 30mm, 1,722mm x 1,133mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 675 mm Weight pallet modules: approx. 332 kg Total weight: 332 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 675 mm, weight approx.: 332 kg

Key data: 600 mm, 3000 mm

Control Mitsubishi ... M 70 V Turning diameter ... 600mm Turning length... 3000mm Spindle bore ... 104mm Powered tools Circumferential diameter over bed ... 600mm Circumferential diameter via support ... 310mm Axis Z ... 2800mm Axis C ... 0,001° Spindle speed... 10-2500 rpm. Turret Machine weight... 5150kg L x W x H ... 5840x1888x2050mm The machine is in good condition, possible to test under power.

This 3-axis ELB Optimat Grinding machine was manufactured in 1989. It features a robust micro granite base and a powerful grinding spindle head with a speed of 1440 rpm. The machine offers a sanding length of 600mm and a width of 375mm, supporting a table load of 300kg. Ideal for precision tasks, the ELB Optimat includes a wet grinding device and a hand lever dressing device. For more information about this Grinding machine, please reach out to us.

Description: 2-machines connected with 1 pallet station 4-axis IKZ X-600mm Y-600 Z-600 B-axis Spindle revision 2020 for one machine WT storage 360 each, total 720 WZ Tool holder HSK63 2 KNOLL 600 K-1 hinged belt conveyors 2 belt filter systems with KNOLL high-pressure system, 70 bar (without automatic filling system for cooling water) 2 LERIC tool changers with 360 places each 1 pallet changer with 2 PalTec FPA450 input stations with 42 pallet spaces connected to both machines, without clamping towers incl. approx. 260 tool holders per machine consisting of various shrink-fit tool holders (without tool), supplemented by collets and Weldon holders  , z-motion: 600 mm, max. workpiece weight between centers: 400 kg, x-motion: 600 mm, y-motion: 600 mm, control: Fanuc 31i-Model A, pallet table size: 450x450 mm, numbers of pallets: 42, taper: HSK63, power capacity - spindle: 18.5/22 kW, t ...

HÖFLER H4000 CNC Gear Grinding Machine Year: 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition

Key data: 560 mm, 510 mm, 560 mm

Control Heidenhain ... TNC 530 Clamping table surface... 400x400mm Axis X ... 560mm Axis Y ... 510mm Axis Z ... 560mm Spindle speed ... 10-10000rpm. controlled axes ... 4 IKZ ISO 40 Pallet change ... 2 L x W x H ... 4730x2540x2616mm Machine weight ... 9000kg Max. workpiece diameter ... 600mm Max. workpiece height ... 600mm Max. workpiece weight ... 300kg Magazine spaces ... 45 The machine is in good condition, not under power.

Description: Floor size: 6600 x 1290 mm No. 12-position tool changer. Main spindle with No. 9-tool drilling head. With auxiliary edging head equipped with No. 3 edge slots magazine of adjustable size, size range from: 10mm to 600mm by interchanging the slots. Present two SIEMENS vacuum pumps with NASH ELMO fans.  , Y-axis travel: 1750mm Z-axis travel: 250 mm X-axis travel: 6000 mm  , Control: OMATIC  , Approx. Onsite Dimension. (l x w x h): 8,000 x 4,000 x 2,450 mm, weight approx.: 5,000 kg

Strip Shooter Vacuumatic Cuti 2; Condition New Unused; Lance 600mm; Stand 180cm; with laser sensor for free use. Tab inserter Vacuumatic Cuti 2; condition new never used; Chute Lenght 600mm; tripod 180cm; with laser sensor for stand alone.

Description: BIESSE COMIL CF 2000 Clamping Press Machine Working length: 2500mm Working width: 600mm Working hight: 1200mm Max throughfeed width: 720mm Feeding speed: 7,5-37,5m/min Adjustable time for the horizontal pistons: 6,85m/min Working air pressure: 6-8 bar Consumption per working cykle: 115dm3 Power 400 volt, 50 Hz, 3 phase serial number: 55,969, Approx. Onsite Dimension. (l x w x h): 7,050 x 720 x 2,600 mm, weight approx.: 2,900 kg

turning diameter over bed:850 mm turning diameter over slide rest:510 mm turning length:3000 mm travel of cross-slide cross:600 mm movement of the upper support:250 mm bed width:600 (Monoblock) mm spindle bore:100 mm spindle nose:DIN 55029 Größe11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:5~630 1/min metric threading:56,1~120 mm feeds - longitudinal:0,08~9,6 mm/min feeds - cross:0.04~4,8 mm/min rapid traverse longitudinal and cross:3640/1800 mm/min tailstock quill diameter:120 mm tailstock quill stroke:250 mm taper in tailstock:6 MK main drive motor:15 kW max. workpiece weight between centers:4000 kg Weight approx.:6800 kg machine width/height:1500x1500 mm machine length:5150 mm 4-jaw independent chuck:800 mm steady fixed:Ø40~350 (mit Rolleneinsätzen) mm fixed steady:Ø100~520 (mit Rolleneinsätzen) mm follower rest:Ø30~120 mm multifix tool holder:Größe C Factory new heavy  ...

Modell:SDM 850 Varia | SDM 1000 Varia turning diameter over bed:850|1000 mm turning diameter over slide rest:520|720 mm centre distance:2000/3000/4000/5000/6000 mm :1150|1350 mm :350 mm travel of cross-slide cross:600 mm movement of the upper support:250 mm bed width:600 (Monoblock) mm spindle bore:100 mm spindle nose:DIN 55029 Größe11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:5~630 1/min tool holder -shaft diameter:45 mm :90° feeds - longitudinal:0,08~9,6 mm/min feeds - cross:0,04~4,8 mm/min rapid traverse longitudinal and cross:3640/1800 mm/min :900 mm/min metric threading:56, 1~120 mm tailstock quill diameter:120 mm tailstock quill stroke:250 mm taper in tailstock:6 MK main drive motor:15|18,5 kW :16,8|20,3 Kva max. workpiece weight between centers:4000 kg Weight approx.:7200 kg machine width/height:1600x1600 mm machine length:6150 mm (4000 mmSpitzenweite) 4-jaw independent c ...

sheet width:approx. 300 mm plate thickness:approx 1,5 - 2,0 mm stations:8 column movement:80 mm Shaft adjustment - vertical -:170 The center height of lower roll is 234mm The longitudinal distance betwin roll centers is 600mm Available: only hardware from Gasparini + a hydraulic device and a small control cabinet for the cutting unit. There is no control cabinet or control included. No manufacturer number.

New CNC working machine brand: Cosmec Type: Smart 30, 5 Achsen Configuration example: other equipment possible on request The smart serie: - Flexibility through cantilever construction - Best equipped for door processing - Protection by laser system (instead of step mats) - Especially good for machining light / small workpieces The controlling: OSAI CNC system control + Aspan CAD-CAM software: - Aspan uses simple commands to execute the machining process - By entering dimensions you can precisely position the machining operations - The machining operations are displayed on the virtual workpiece. - Diverse macros facilitate programming (of holes, slots, linear milling, arc milling...) Aspan Doors - Software module for easy creation of programs for door processing. - Different door types are already stored (doors with milled arches, round doors...) - Doors can ...