vacuum sealing machine used for sale

4-lane VFFS for the packaging of solid products, granulates, powder or liquids in center sealed bags, optionally also for 3- and 4-side sealed bags (extra charge). Servo motors for fast film feed. Suitable for all sealable mono and composite films as well as laminated films. Further features: Touch screen operating monitor, automatic program setup, mark sensor, date/batch printer. - Specifications: max. machine cycle rate in idle mode: 4x60 cycles/minute (corresponds to max. 240 bags/min) | bag sizes: L(50-250)xW(55-102)mm | film width: 520-900mm | power: 380V, 6,3kW | compressed air: 1,4m?/min, 6bar | machine dimensions: L1800xW1600xH1760mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery ...

Vertical packaging machine, high speed machine with continuous reciprocating sealing jaws motion, suitable to do pillow and gusset bags, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(50-300)xW(50-240)mm (single pulling) | film width: 130-510mm | max. speed of the machine in neutral: 180 cycles/minute | stainless steel | 380V/9.0kW | 6bar, 0.25m?/min | machine dimensions: L1700xW1300xH1700mm | weight: 700kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for ...

Vertical packaging machine, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(50-380)xW(100-300)mm (single pulling) | max. speed of the machine in neutral: 90 cycles/min | stainless steel | 220V/4.5kW | 6bar, 0.25m?/min | machine dimensions: L1600xW1260xH1680mm | weight: 600/700kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customize ...

Vertical packaging machine, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(50-300)xW(80-240)mm (single pulling) | max. speed of the machine in neutral: 100 cycles/minute | stainless steel | 220V/4.0kW | 6bar, 0,25m?/min | machine dimensions: L1150xW1160xH1480mm | weight: 550/650kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for custom ...

Vertical packaging machine, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(50-230)xW(60-190)mm (single pulling) | max. speed of the machine in neutral: 100 cycles/minute | stainless steel | 220V/3.5kW | 6bar, 0,20m?/min | L1300xW960xH1150mm | weight: 500/600kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviat ...

Vertical packaging machine, MITSUBISHI PLC, WEINVIEW touch screen operator interface, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling. - Specifications: bag size: L(100-380)xW(110-300)mm | max. speed of the machine in neutral: 60 cycles/minute | stainless steel | 220V/4.0kW | 6bar, 0.4m?/min | machine dimensions: L1600xW1260xH1680mm | weight: 600/700kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All ma ...

Vertical packaging machine, MITSUBISHI PLC, WEINVIEW touch screen operator interface, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling. - Specifications: bag size: L(100-300)xW(80-240)mm | max. speed of the machine in neutral: 60 cycles/minute | stainless steel | 220V/3.5kW | 6bar, 0.36m?/min | machine dimensions: L1550xW1160xH1480mm | weight: 600/700kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All ma ...

Vertical packaging machine for pre-made tubular film. The machine features a simple production process, as the tubular film only needs to be vertical-sealed. - Specifications: Bag dimensions: max. bag length 500mm, bag width 200-350mm | bag shape: pillow bag | suitable tubular film material: PE | suitable film thickness: 0.06-0.12mm | max. speed of the machine in neutral: 15 cycles/minute | stainless steel SUS 304 | 220V/0.4kW | 6bar, 0.6m?/min | machine dimensions: L880xW1150xH1170mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

The automatic traysealer is a device used to close preformed trays with the possibility of vacuum and modified atmosphere packaging. Manufacturer: WEBOMATIC; Model: TL500; Length: 3300 mm; Width: 1000 mm; Height: 1600 mm; Weight: 1000 kg.

Multivac T200 Tray sealer Serial: 125 Stainless, currently set to seal a 285mm x 175mm tray, mobile, 3Ph

Ishida QX1100 Flex Tray Sealer  Fully automatic tray sealer. Twin lane configuration Suitable for mass production lines Has been packing layered salads in round bowls.

Regal RP12/T twin head rotary filling machine suitable for coleslaw and potato salad type products into square containers. The anticipated production speed is between 60 - 65 containers / minute. The machine will also be capable of running rectangular pots in the future, although an additional set of change parts will need to be purchased. 1.1.1 – PRODUCT SPECIFICATION DETAILS Machine Layout Container Dispense: A twin head positive separation container dispense complete with vacuum assist pull-out arms, to dispense 2 containers each index into the rotary table. The stack will have its own container detection system which will initiate the shift register on the machine. Container Detection: Container detection will be done on the station after the de-nester via 2 visual sensors. Filling Assembly: A twin head, volumetric filling assembly suitable for filling coleslaw and p ...

Packaging Automation Eclipse SL6 Tray Sealer High speed machine 6-tray tooling Tray size (mm): approx internal: 155 x 110; external: 170 x 123

Machines for the production of wicketer bags. (e.g. bread bags) Material = Ldpe; HDPE, PP Power max. 120 bag / minute. Rapport 250 -500 mm, Unwinder width = 1400 mm ( With brake ) Side edge control . Folding unit Punch for holes Wicket transport unit

Automatic machine Bag machine for the production of bags on roll. Capacity 50 bags / minute (depends on the size) Machine width 1200 mm Unwinder width = 1200 mm (tubular film) Core Magazine Folding unit for C folding Floor welding and perforating unit Automatic winder (turnstile) with automatic sleeve feed

Bausch complete vial line including labelling and inspection in „as-new condition comprising: Bausch type 721 De-bagging machine for vial tubs size 221 x 379 x 49.5 mm, with oRABS Bausch type 411 enclosed sterile transfer chamber to decontaminate outer surfaces using 4 UV light lamps Bausch type 721 De-lidding and de-nesting of the vial tubs under isolator Bausch type 534 filling and closing machine for stoppers/rubber bungs, operates under class A conditions into an isolator for toxic products, rotary infeed table, pre- and post-weighing for the In-Process Control (IPC) of a 100% weight verification of each vial, pre-gassing with nitrogen, dosing using 4 peristaltic pumps with a filling accuracy of up to +/-1% Bausch type 551 closing machine for aluminium crimp caps and flip-off with rotary infeed table, under isolator Bausch type 309 cleaning machine for external washing, rinsi ...

IWKA TZK100 automatic tube feeding system for conical shaped tubes, suitable for conical tubes with a diameter of 12 to 50 mm and a maximum tube length of 235 mm, rod length 730 to 850 mm, capacity from 40 to 100 tubes per minute,compressed air 6-8 bar, machine floor space approx. 2000 x 690 mm (LxW), machine height approx. 1570 mm, machine net weight approx. 570 kg

TBA/8 for TBA 1000 Base with Cardboard Packer 62

Product number: 2660J Type: A8 Serial number: 01-2743 Year of construction: 2014 Dyes: 7 pcs Dye numbers: 8350, 7621-19, 7617, 7617-19, 7616-19, 4343-19, 4343-20 Compressed air: 6 Bar Water: 300 l/h Power: 3 x 400V, 50Hz, 12kW Dimensions: 13100 x 950 x 2100 mm Including 2 pc. tooling exchange trolley, storage racks for storing 6 dyes

Filling machine for filling and closing liquids in corresponding bottles. Dosing volume: approx. 50-500 ml. 4-digit machine incl. 6 format parts, infeed turntable, Johnson pump, spare parts etc.

Tray sealer VC999 TS 500, Connection 400V, 4kW, year of construction 2014, with operating instructions, Tool for 4 bowls 187x137mm, incl. almost complete cardboard PP bowls black 187x137x25mm, Dimensions machine LxWxH approx. 120x85x166cm, weight approx. 432kg, Machine used, in very good condition, service-maintained, fully functional

Used bottling machine in plastic bags made by Mlecz-Masz, model PAC 50. New 2004.

Ross Industries A10 Tray sealer Serial: 406 2011, stainless tray sealer, modified atmosphere or seal only, up to 10 trays per min, seals two tray at a time, tray dims 200mm x 160mm, adjustable temp and timer controls, 3Ph

Complete line for filling TBA 1000 Edge with the following equipment - A3/Flex - Capper 20 - Cardboard packer: TCBP 70 -Conveyors All Tetra Pak equipment in good and running condition. Machines are still installed and producing.

Automatic cup/tray filling line Designed for oval trays (160 x 90 mm) with tray contents up to 250g, cycle rate up to 30 cycles/minute possible output 1800 to 3600 trays per hour (depending on tray size). The machine can be guided manually and in automatic mode.

Groninger SMB 18005 assembly machine for putting plastic backstops on disposable syringes, object diameter from 6.85 up to 17.05 mm, cylindrical object height from 35 up to 85 mm, diameter of the finger flange up to 28 mm, length of the syringe up to 135 mm, length of the backstop up to 45 mm, width of the backstop up to 30 mm, working height 1000 +/- 15 mm, electrical connection 230/400 V, 50 Hz, 3 Ph. + N + PE, power consumption approx. 2.5 KVA, Siemens SIMATIC S7-400 SPS, capacity up to 18,000 units per hour

EMDE BFR 1500 Big-Bag Filling System with bag inflation system for the dust-free precise and reliable filling of big bags, max. load 1000 kg, electrics 400V/50Hz, power consumption 0.5 kW, capacity up to 40 big-bags per hour

Product number: 2755J Type: T250 Serial number: 115818 Year of construction: 2007 Dye: 320 x 215 mm Tray height: max 130 mm Vacuum pump: Busch, 100 m³/h Compressed air: 7 - 10 Bar Water: 1.5 - 4.5 bar, 35 l/h Power: 3 x 415V, 50Hz, 6.2kW Dimensions: 1000 x 800 x 1600 mm Weight: 425 kg

Mobile multi-format machine for filling and closing vials and bottles with variable closing systems.. - Pick & Place Station Presskappe inkl. entsprechende RNA-Fördereinheit ab Vibrator (Schwingförderer) - Container size: up to 250 ml. Machine incl. feeding turntable, dosing system FLEXICON, capping system, PLC SIEMENS Simatic etc

Product number: 2766J Type: T300 Serial number: 236687 Year of construction: 2016 Capacity: 6 - 10 cycles/min. Dye 1: +/- 200 x 135 mm Dye 2: +/- 248 x 145 mm Compressed air: 7 bar Cooling water: 1.5 Bar Power: 3 x 400V, 50Hz, 6.6kW Dimensions: 2600 x 1150 x 1700 mm Weight: 1100 kg For vacuum and gas flush

Product number: 2791J Type: T800 Serial number: 180781 Year of construction: 2014 Capacity: max 15 strokes/min. Dye: (6x) +/- 133 x 203 mm Tray depth: max 150 mm Power: 3 x 415V, 50Hz, 8.4kW Dimensions: 4550 x 1000 x 2000 mm Weight: 1700 kg Including WW10 tool changing trolley and RS800 shelving system

Good working conditions

Bottom weldig machine with slit selimg up to 4 webs, unwinding, side gusseting, hole punching, collecting belt, max. welding width 1300 mm, draw length: 220 - 1300 mm, cycles (mech.) max. 220/min, very good condition, video availabale

Overview The machine was manufactured in 2017 by the Italian manufacturer Ecocaps. It seals beverage cans with an aluminum foil. This not only gives the can better protection against external influences, but also provides additional advertising space. Technical details Capacity: 24,000 cans/h Sealing heads: 24 Control with servo motors Application of an aluminum protective seal, also called Topsyl  Thermal bonding of Topsyl and can Voltage: 415V Frequency: 50-60 Hz Load current: 28,5 A

• Designed for sealing cans with a round plastic film punched from the roll • With double punching station and double sealing station • Running direction from left to right • Station adjustment in running direction of the cans • Prepared to accept a conveyor belt (not included in the scope of delivery) to accommodate cans/bottles in transport buckets provided (not included in the scope of delivery) • Rationator transport buckets, type RATILIGHT Puck 1 for object sizes 50-1000 ml were used (see pdf). • Output max. 50-60 objects/min • Max. Object height 400 mm • Punching with punching knives • Existing die-cutting and sealing formats for film diam. 83.1 mm • Foil grid rewinding • PLC Siemens S7-300, Siemens Touch monitor • Drive 400V/50Hz

Multivac T200 Tray sealer 2007, Stainless, twin tooling currently set to seal a 200mm x 130mm tray, mobile, 3Ph

Used machine for the application and sealing of shrink sleeve labels. Manufacturer PDC Europe SAS. New 2007. The machine consists of: 1. shrink sleeve label applicator PDC100BEM , 2.5 kW. The sleeve applicator is an automatic unit designed to apply neutral or printed PVC and/or PET sleeves. The process of making and setting the sleevs takes place in five working zones: The spool is supported and unwound up to the opening tetrahedron, The roll of sleev is opened and then directed to the cutting zone where it is cut to length. The sleeve is moved from the cutting zone to the ejector by means of a feeder. The product to be labelled is fed underneath the ejector, positioned underneath it precisely and moved on. The Sleeve is placed on the product using the ejector. Estimated weight of applicator: approx. 300 kg. 2. heating tunnel TAR1500-III for heat-shrinkable labels. Output 19 ...

Bag machine U 1100 for side seam products from RHS Elektrotechnik (Stiegler) Conversion of servo technology in 2013 by RHS Working width 300 mm – 1100 mm, Throughput max. 70 m/min., 20 – 200 cycles/min., 3 single hole beams/6 mm Feed 70 mm – 300 mm, single-lane unwinding

Bag machine TS 800 for side seam products from RHS Elektrotechnik (Stiegler) Conversion of servo technology 2017/2018 by RHS Working width 150 mm – 750 mm Throughput max. 50 m/min., 50 – 150 cycles/min. 2 single hole beams/6 mm Feed 70mm – 250 mm, single-lane unwinding

Semi-automatic machine 220 V Electric box with disconnecting switch Reset system for screwing head Bottles from 30 to 365mm height Bottle holder tray (manual height adjustment) Current tooling : 1 screwing head covered with rubber with 3 brackets. Head foot for ? 31. Possibility to change head for other format / use or crimping, capping, ...

Zalkin TM125 single-headed capping machine The maximum output of this equipment is about 3000 bottles / hour. The bottles are introduced by accumulation. Direction left -> right Current format: Plastic Cap: diameter 60.5 mm x 4.5 mm Aluminium Cap: diameter 62 mm x 4.5 mm 16-cell wheel: pitch diameter 530 mm / cell diameter 56 mm - Caps dispenser (vibrating bowl + dispensing chute taken on the fly) type ADV N?6430 and 6428. - Rotating table: feeding bottles Entry conveyor belt: 2000 mm / width 110 mm Belt at the entrance on the machine: 1500 m Exit belt: 500 mm Capping head 104 Voltage: 380 Volts 50 hz electrical box on the output side. 1 control cell for checking the presence of the bottle with plastic cap 1 control cell for checking the presence of the aluminium bottle cap. 1 accumulation detection cell 1 jam detection cell

Beck Series Packer S 1450 X with Gripper Feeder Longitudinal and transverse welding and working height adjustment variable Working width 140 mm to 500 mm Length, variable, endless Height up to 100 mm Flat film PE feed via one roll each for the bottom and for the top Edge strip rewinding device Packing capacity up to 60 packs per minute

Product number: 2849 Type: A10 Serial number: 01-1746 Year of construction: 2007 Compressed air: 8 Bar, 640 l/min. Water: 8 l/min. Power: 3 x 400V, 50Hz, 12kW Dimensions: 12500 x 1000 x 2150 mm Weight: 2700 kg

MAMAMTA WIN 305 foil bag sealing machine Technical condition (on a scale of 1-10): 10 Year of manufacture 2018. 0 production mileage. Status - after startup. Possibility of testing.

Angle welder for welding in different containers

Rommelag Bottlepack 3012 Blow-Fill-Seal Machine (BFS) with moulds for nasal & eye drop bottles 5 ml. & 10 ml., 7-cavities (7x5 ml. & 7x10ml.), capacity up to 3.000 bottles per hour, includes granulate vacuum feeding system, cooling wáter recirculation sytem and miscellaneous spare parts, new Siemens touch screen control panel (HMI) in 2015.

Filling line with 8-fold bottle filler, 3-fold screwdriver and lifting station The system ran until 2023 with mostly 1000 ml bottles and was no longer needed due to a new investment. Further information can be requested.

Lemo Intermat V. 600 ST-N-400 , Year 1999 Machine for the production of wicketer bags HD-PE, LD-PE, LLD-PE, PP Capacity max. 210 bags/minute. Unwinder Max. width = 1350 mm (with brake and side edge control) Max. diameter = 1200mm, Sleeve = 6" Longitudinal separating unit (can also be used for perforation) Folding triangle to form a half tube. Folding unit for bottom gusset 2 punching units bridge with tools 1 punching unit for valves 1 separating seam welding device Pen stacker Data: Bag length 155 -520 mm incl. flap flap = 40 -60 mm, Bottom gusset =27-60 mm Bag width = 70 to 400 mm Test run is possible. The machine is well maintained.

Optima ImmuFill filling & closing machine for plastic bottles used for Test Kits in diagnostics with screw cap and labelling, bottle diameter max. 55 mm, bottle height max. 130 mm, screw cap diameter max. 28 mm, filling station for microdosing via a peristaltic pump (filling accuracy +/-5% at 0,5 ml.), torque controlled screw capper, Wipotec weighing cell for checking the weight of the filled bottles, label applicator with Domino V230i thermotransfer printer, capacity up to 1,500 bottles per hour with a filling volume of 10 ml., machine floor space approx. 2820 x 2500 mm (LxW), machine height approx. 2200 mm

Groninger plastic bottle filling & closing line for eye drops (Ophthalmic), etc. comprising ZVB 2650 fully automatic empty bottle sorting & feeding unit and DSVG 4132 fully automatic intermittent motion filling, stopper and capping machine with barrier system with laminar flow modules type ORABS with LF Units, working stations: 1. IPC Tara – 2. gassing during filling – 3. 4 filling heads (multi stage filling) with servo controlled peristaltic pumps, filling accuracy +/-0,5 % referred to volumes above 1 ml. and +/-1,0 % referred to volumes below 1 ml. – 4. IPC gross – 5. post-gassing – 6. 2-head dropper inserting station – 7. 2-head screw capping station – 8. Bottle discharge, Allen Bradly Control Logix PLC + Allen Bradley Panel View Plus 6 / 1500 HMI, includes format parts for bottles for 3 ml. (Ø 18,70 x H 28,20 mm) and 10 ml. (Ø 25,00 x H 43,65 mm), capacity up to 120 b ...