vacuum blower used for sale

Industrial pneumatic vacuum lifting attachment fitted with two large rubber suction pads, intended for gripping and handling flat, non-porous materials such as stone slabs, sheet material, glass or similar workpieces. Type: Pneumatic vacuum lifting / handling device Vacuum pads: 2 large circular rubber suction pads Operation: Pneumatic Air connection: Quick-connect compressed-air coupling Pneumatic components: Festo components visible Controls: Manual pneumatic control valve and push-button controls Monitoring: 2 × Festo vacuum/pressure gauges with coloured operating ranges Lifting points: Multiple steel lifting eyes Handling: Integrated carrying handles Construction: Heavy-duty welded steel housing Auction-ID: A1-51282-159

GRABO Plus in case + extra GRABO battery - Electric portable vacuum sucker - Hand tool - Lifting capacity 120 kg Auction-ID: A1-40901-376

GRABO Plus in case + extra GRABO battery - Electric portable vacuum sucker - Hand tool - Lifting capacity 120 kg Auction-ID: A1-40901-204

Design: single-stage, oil-sealed rotary vane vacuum pump with gas ballast valve Nominal pumping speed: 1.9m³/h (50Hz) / 2.3m³/h (60Hz) Effective pumping speed: 1.75m³/h (50Hz) / 2.1m³/h (60Hz) Final partial pressure without gas ballast: 3x10E-2mbar Final total pressure with gas ballast: 5x10E-1mbar Motor Power: 80W Speed: 1500min-1 (50Hz) / 1800min-1 (60Hz) Oil filling: 0.11-0.14l Sound level: 50dB(A) Voltage: 230V AC Accessories: Power cord. Auction-ID: A7-52036-80

Max. pumping speed: 630m³/h Total final pressure: ≤0.01mbar Motor power: 15kW Rated Speed: 2930min-1 (50Hz) Rated Current: 28A (400V) / 56A (200V) COS φ: 0.89 Degree of protection: IP55 Insulation class: F Cooling: Water (version F) Cooling water: Pmin 2bar, Pmax 16bar, Vmax 12l/min, Tmax 35°C Connection flanges suction and discharge side: DN100 (EN 1092-2 PN6, compatible PN10, ISO-K via collar flange) Permissible Exhaust gas back pressure: +200/-50mbar compared to atmosphere Max. permissible Suction temperature: 100°C Water vapor compatibility (with gas ballast): 40mbar Water vapor capacity: 14kg/h Noise level: ≤72dB(A) Permissible Ambient temperature: 10-40°C Oil type/filling: LVO 210, 15l Standard: EN 1012-2 Weight: 530kg Accessories: Coolant armoured hoses with screws on the coolant connection. Auction-ID: A7-52036-114

Nominal pumping speed: 95/110m³/h (50/60Hz) Ultimate pressure: 5x10-2/2x10-2mbar (50/60Hz) Power consumption at ultimate pressure: 1.3/1.5kW (50/60Hz) Gas inlet/outlet: DN50/DN40 Cooling water flow: 2.3-3l/min, cooling water connection IN/OUT with quick couplings Sound pressure level: less than 65dB(A) Multistage Roots Pump, Dry Running Certification: SEMI S2, UL 61010 Electrical data according to the nameplate: 380-480V, 3 phases/4 wires, 50/60Hz, 10A, SCCR 11kA, full load current 10A (200-230V triangle) or 5A (380-480V star), circuit diagram S9595-5 Mains connection via Harting connectors with main switch N2 purge gas connection with pressure regulator Interfaces: Sub-D connector (remote control/accessory J2-J8), RJ45, HHR connector for front hand control unit Emergency stop buttons and status LEDs (Power, Running, Warning, Alarm) Chassis with swivel castors and adjustable feet Weight ...

Peak pumping speed: 100m³/h Ultimate pressure: 6.6x10-3mbar Power consumption at ultimate pressure: 1.6kW Power consumption no-load: 0.5-1.0kW Suction Flange: DN50 ISO-KF Exhaust flange: DN25 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement: min. 100l/h Max. cooling water pressure: 7bar (101psi) Noise level: 55dB(A) Interfaces: SPI, RS232/485 Dry Running Multistage Roots Pump Weight: 100kg Additional N2 connector (N2 IN, max. 7bar/101psi) Additional serial port 9-pin D-Sub with DIP switches Mains connection according to the manufacturer either 200-208V or 380-400V, 3-phase, 50/60Hz Version Ed. V3.7 Accessories: Chassis with castors and pull handle. Auction-ID: A7-52036-48

Max. pumping speed: 630m³/h Total final pressure: ≤0.01mbar Motor power: 15kW Rated Speed: 2930min-1 (50Hz) Rated Current: 28A (400V) / 56A (200V) COS φ: 0.89 Degree of protection: IP55 Insulation class: F Cooling: Water (version F) Cooling water: Pmin 2bar, Pmax 16bar, Vmax 12l/min, Tmax 35°C Connection flanges suction and discharge side: DN100 (EN 1092-2 PN6, compatible PN10, ISO-K via collar flange) Permissible Exhaust gas back pressure: +200/-50mbar compared to atmosphere Max. permissible Suction temperature: 100°C Water vapor compatibility (with gas ballast): 40mbar Water vapor capacity: 14kg/h Noise level: ≤72dB(A) Permissible Ambient temperature: 10-40°C Oil type/filling: LVO 210, 15l Standard: EN 1012-2 Weight: 530kg Accessories: Steel transport and set-up frame (anthracite painted) with Leybold plant sign \"502260 ZEG, Part No 502260, Serial No 30001018230\". Leybold  ...

Design: speed-controlled, dry-running diaphragm vacuum pump for rotary evaporators Max. pumping speed: 1.7m³/h Ultimate pressure: 2.0mbar Voltage: 100-120/200-240V, 50/60Hz, 1.6/0.7A Order number manufacturer: 591-00141-00-0 Equipment: Separator on the suction nozzle, check valve, connection socket for control cable, IEC connection Accessories: Separator on suction nozzle with hose connection and screw connections, power cable. Auction-ID: A7-52036-84

Pumping speed (suction power): 4.8m³/h (50Hz) / 6.2m³/h (60Hz) Scoop volume according to nameplate: 5m³/h (50Hz) / 6.4m³/h (60Hz) Final pressure: ≤5x10-2mbar Leakage rate: ≤1.0x10-6mbar l/s Max. Suction Pressure: Atmospheric Pressure Suction flange: DN25 ISO-KF (NW25), vertical Outlet Flange: DN16 ISO-KF (NW16) Air-cooled Gas Ballast/Air Flush Valve Integrated hour meter Motor: Nidec EN-8T, single-phase asynchronous motor with two capacitors, 4 poles, 0.15kW, IP44, insulation class B, TP212 thermal protection with automatic reset Electrical data according to engine shield: 100V 50Hz 2.6A / 100V 60Hz 2.1A / 115V 60Hz 2.2A / 200V 50Hz 1.3A / 200V 60Hz 1.1A / 230V 50Hz 1.6A / 230V 60Hz 1.1A Speed: 1430-1440min-1 (50Hz), 1730-1740min-1 (60Hz) Noise level: ≤52dB(A), with open purge air ≤57dB(A) Ambient temperature: 5-40°C Pump protection class: IP20 Weight: 14kg Accessories: Po ...

Peak pumping speed: 100m³/h Ultimate pressure: 6.6x10-3mbar Power consumption at ultimate pressure: 1.6kW Power consumption no-load: 0.5-1.0kW Suction Flange: DN50 ISO-KF Exhaust flange: DN25 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement: min. 100l/h Max. cooling water pressure: 7bar (101psi) Noise level: 55dB(A) Interfaces: SPI, RS232/485 Dry Running Multistage Roots Pump Weight: 100kg Mains connection according to the manufacturer either 200-208V or 380-400V, 3-phase, 50/60Hz Version Ed. V3.7 Accessories: Chassis with castors and pull handle. Auction-ID: A7-52036-47

4x SECUVAC DN 100 safety valve (Leybold No. 215225): EM valve aluminium, connections DN100 ISO-K, 24V DC, 2.5W, protection class IP65, spring return (closed without current) 1x exhaust silencer Leybold Prod.-Nr. 119001 (for SCREWLINE SP 630 / DRYVAC DV 1200): volume 35l, max. 110°C, max. pressure 500mbar, weight 30kg 1x Exhaust air filter (oil mist filter) Leybold AF 4-8, Cat. no. 189 06, for TRIVAC D4B/D8B, connections DN16 ISO-KF Stainless steel pipe bends and corrugated hoses (expansion joints) with ISO-K flanges and clamps Centering rings, clamp screws/claws, flange gaskets and small parts Accessories: Stainless steel pipe bends and corrugated hoses (expansion joints) with ISO-K flanges, box with centering rings and flange gaskets, box with claws/clamp screws, a Leybold part in its original packaging in a box (not identifiable), pallet. Auction-ID: A7-52036-62

Max. pumping speed: 630m³/h (50/60Hz) Total final pressure: ≤0.01mbar Motor power: 15kW Rated Speed: 2930min-1 (50Hz) Rated Current: 28A (400V) / 56A (200V) COS φ: 0.89 Motor protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) Connection flanges suction and discharge side: DN100 (EN 1092-2 PN6, compatible PN10, ISO-K via collar flange) Permissible Exhaust gas back pressure: +200/-50mbar compared to atmosphere Max. permissible Suction temperature: 100°C Water vapor compatibility (with gas ballast): 40mbar Water vapor capacity: 14kg/h Noise level: ≤72dB(A) Permissible Ambient temperature: 10-40°C Air-cooled Oil type/filling: LVO 210, 15l ATEX marking according to the nameplate: II (inside) 3G IIC T3 (160°C) X, 10°C small Ta less than 40°C Pump protection class: IP55 Weight: 530kg Accessories: External control box (made by Althaus AG) with main  ...

Nominal pumping speed: 505m³/h (50Hz) / 606m³/h (60Hz) Max. pressure difference: 80mbar (50/60Hz) Intake Flange: DN63 ISO-K Outlet Flange: DN63 ISO-K Integral leak rate: 1x10-5mbar·l/s Noise level: 63dB(A) Air-cooled Degree of protection: IP20 Resources: PFPE Motor: Emod VUF112/2-110, 3~, heat class F, S1, PTC/NC 1x140°C Motor data 50Hz: 2.2kW, 2900min-1, 9.0/5.2A, 230/400V triangle/star, cos φ 0.80 Motor data 60Hz: 2.4kW, 3480min-1, 10.0/5.8A, 265/460V triangle/star, cos φ 0.84 Alternative circuit 200V: 1.6kW, 7.8A (50Hz 200V / 60Hz 200/208V) Ambient temperature: 12-40°C Weight: 135kg Auction-ID: A7-52036-57

Nominal pumping speed: 3000m³/h (60Hz) Ultimate pressure: 4x10-3mbar (60Hz) Final pressure with 50 SLM purge gas: 9x10-3mbar (60Hz) Power consumption at ultimate pressure: 2.7kW (60Hz) Cooling water flow: 2.5-5l/min Sound pressure level: less than 72dB(A) Suction Flange: DN160 ISO-K Outlet Flange: DN40 ISO-KF Water-cooled, coolant connections IN/OUT with quick couplings Nitrogen purge gas connection (N2) Max. Continuous Inlet Gas Flow: 100slm Construction: multi-stage dry pump with attached roots pump type DSB3000 (P/N 125584), frequency converter Yaskawa V1000 Interfaces: J1-J8 (Sub-D, RJ45), connection HHR for handheld control unit Lubricant Gear: Fomblin (according to sticker) Electrical data according to nameplate: 380-480V star (Y) 21A or 200-230V triangle 33A, 3-phase/4-wire, 50/60Hz Weight: 800kg Accessories: Pfeiffer Vacuum P/N 125540 (S/N NRX1724416) hand control unit with sp ...

Max. pumping speed: 630m³/h Total final pressure: ≤0.01mbar Motor power: 15kW Rated Speed: 2930min-1 (50Hz) Rated Current: 28A (400V) / 56A (200V) COS φ: 0.89 Degree of protection: IP55 Insulation class: F Cooling: Water (version F) Cooling water: Pmin 2bar, Pmax 16bar, Vmax 12l/min, Tmax 35°C Connection flanges suction and discharge side: DN100 (EN 1092-2 PN6, compatible PN10, ISO-K via collar flange) Permissible Exhaust gas back pressure: +200/-50mbar compared to atmosphere Max. permissible Suction temperature: 100°C Water vapor compatibility (with gas ballast): 40mbar Water vapor capacity: 14kg/h Noise level: ≤72dB(A) Permissible Ambient temperature: 10-40°C Oil type/filling: LVO 210, 15l Standard: EN 1012-2 Weight: 530kg Auction-ID: A7-52036-115

Nominal pumping speed: 26m³/h (50Hz) / 31m³/h (60Hz) Pumping speed: 22.5m³/h (50Hz) / 25m³/h (60Hz) Final partial pressure without gas ballast: ≤0.5mbar Final total pressure with gas ballast: ≤0.8mbar Water vapor compatibility: 10mbar Max. water vapor capacity: 85g/h (50Hz) / 100g/h (60Hz) Sound pressure level: 64dB(A) (50Hz) / 67dB(A) (60Hz) Leak rate: 1x10-3mbar l/s Intake connection: G3/4 (reduction to G1/2) Exhaust connection: G3/4 Oil according to nameplate: mineral oil ISO VG32 (Leybold GS32), capacity 0.5l Integrated check valve (anti-suck-back) in the intake flange Motor: Hanning D8G2-8-067, three-phase motor, 0.9/1.1kW, 2830/3400min-1, IP55, insulation class F Electrical data according to engine shield: Triangle 200-240V / Star 346-415V 50Hz, Triangle 200-277V / Star 346-480V 60Hz, 4.0/2.3A / 4.5/2.6A, cos φ 0.83/0.84 Weight according to nameplate: 27kg Accessories: A ...

Peak pumping speed: 100m³/h Ultimate pressure: 6.6x10-3mbar Power consumption at ultimate pressure: 1.6kW Power consumption no-load: 0.5-1.0kW Suction Flange: DN50 ISO-KF Exhaust flange: DN25 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement: min. 100l/h Max. cooling water pressure: 7bar (101psi) Noise level: 55dB(A) Interfaces: SPI, RS232/485 Dry Running Multistage Roots Pump Weight: 100kg Mains connection according to the manufacturer either 200-208V or 380-400V, 3-phase, 50/60Hz Version Ed. V3.7 Accessories: Chassis with castors and pull handle. Auction-ID: A7-52036-46

Max. pumping speed: 630m³/h (50/60Hz) Total final pressure: ≤0.01mbar Motor power: 15kW Rated Speed: 2930min-1 (50Hz) Rated Current: 28A (400V) / 56A (200V) COS φ: 0.89 Motor protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) Connection flanges suction and discharge side: DN100 (EN 1092-2 PN6, compatible PN10, ISO-K via collar flange) Permissible Exhaust gas back pressure: +200/-50mbar compared to atmosphere Max. permissible Suction temperature: 100°C Water vapor compatibility (with gas ballast): 40mbar Water vapor capacity: 14kg/h Noise level: ≤72dB(A) Permissible Ambient temperature: 10-40°C Air-cooled Oil type/filling: LVO 210, 15l ATEX marking according to the nameplate: II (inside) 3G IIC T3 (160°C) X, 10°C small Ta less than 40°C Pump protection class: IP55 Weight: 530kg Accessories: Leybold exhaust silencer, Prod.-No. 119001 (volume 3 ...

Nominal pumping speed: 95/110m³/h (50/60Hz) Ultimate pressure: 5x10-2/2x10-2mbar (50/60Hz) Power consumption at ultimate pressure: 1.3/1.5kW (50/60Hz) Gas inlet/outlet: DN50/DN40 Cooling water flow: 2.3-3l/min, cooling water connection IN/OUT with quick couplings Sound pressure level: less than 65dB(A) Multistage Roots Pump, Dry Running Certification: SEMI S2, UL 61010 Electrical data according to the nameplate: 380-480V, 3 phases/4 wires, 50/60Hz, 10A, SCCR 11kA, full load current 10A (200-230V triangle) or 5A (380-480V star), circuit diagram S9595-5 Mains connection via Harting connectors with main switch N2 purge gas connection with pressure regulator Interfaces: Sub-D connector (remote control/accessory J2-J8), RJ45, HHR connector for front hand control unit Emergency stop buttons and status LEDs (Power, Running, Warning, Alarm) Chassis with swivel castors and adjustable feet Weight ...

Peak pumping speed: 100m³/h Ultimate pressure: 6.6x10-3mbar Power consumption at ultimate pressure: 1.6kW Power consumption no-load: 0.5-1.0kW Suction Flange: DN50 ISO-KF Exhaust flange: DN25 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement: min. 100l/h Max. cooling water pressure: 7bar (101psi) Noise level: 55dB(A) Interfaces: SPI, RS232/485 Dry Running Multistage Roots Pump Weight: 100kg Mains connection according to the manufacturer either 200-208V or 380-400V, 3-phase, 50/60Hz Version Ed. V3.7 Accessories: Chassis with castors and pull handle. Auction-ID: A7-52036-49

Nominal pumping speed: 3000m³/h (60Hz) Ultimate pressure: 4x10-3mbar (60Hz) Final pressure with 50 SLM purge gas: 9x10-3mbar (60Hz) Power consumption at ultimate pressure: 2.7kW (60Hz) Cooling water flow: 2.5-5l/min Sound pressure level: less than 72dB(A) Suction Flange: DN160 ISO-K Outlet Flange: DN40 ISO-KF Water-cooled, coolant connections IN/OUT with quick couplings Nitrogen purge gas connection (N2) Max. Continuous Inlet Gas Flow: 100slm Construction: multi-stage dry pump with attached roots pump type DSB3000 (P/N 125584), frequency converter Yaskawa V1000 Interfaces: J1-J8 (Sub-D, RJ45), connection HHR for handheld control unit Lubricant Gear: Fomblin (according to sticker) Electrical data according to nameplate: 380-480V star (Y) 21A or 200-230V triangle 33A, 3-phase/4-wire, 50/60Hz Weight: 800kg Accessories: Pfeiffer Vacuum P/N 125540 (S/N NRX1718019) hand control unit with sp ...

Max. pumping speed: 630m³/h (50/60Hz) Total final pressure: ≤0.01mbar Motor power: 15kW Rated Speed: 2930min-1 (50Hz) Rated Current: 28A (400V) / 56A (200V) COS φ: 0.89 Motor protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) Connection flanges suction and discharge side: DN100 (EN 1092-2 PN6, compatible PN10, ISO-K via collar flange) Permissible Exhaust gas back pressure: +200/-50mbar compared to atmosphere Max. permissible Suction temperature: 100°C Water vapor compatibility (with gas ballast): 40mbar Water vapor capacity: 14kg/h Noise level: ≤72dB(A) Permissible Ambient temperature: 10-40°C Air-cooled Oil type/filling: LVO 210, 15l ATEX marking according to the nameplate: II (inside) 3G IIC T3 (160°C) X, 10°C small Ta less than 40°C Pump protection class: IP55 Weight: 530kg Accessories: Leybold Exhaust Silencer, Prod.-No. 119001 (volume 3 ...

Professional wet and dry vacuum cleaner, 80 liters 3000 watt, 3 motors incl. accessories, unused in box Auction-ID: A1-40422-223

Max. pumping speed: 630m³/h (50/60Hz) Total final pressure: ≤0.01mbar Motor power: 15kW Rated Speed: 2930min-1 (50Hz) Rated Current: 28A (400V) / 56A (200V) COS φ: 0.89 Motor protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) Connection flanges suction and discharge side: DN100 (EN 1092-2 PN6, compatible PN10, ISO-K via collar flange) Permissible Exhaust gas back pressure: +200/-50mbar compared to atmosphere Max. permissible Suction temperature: 100°C Water vapor compatibility (with gas ballast): 40mbar Water vapor capacity: 14kg/h Noise level: ≤72dB(A) Permissible Ambient temperature: 10-40°C Air-cooled Oil type/filling: LVO 210, 15l ATEX marking according to the nameplate: II (inside) 3G IIC T3 (160°C) X, 10°C small Ta less than 40°C Pump protection class: IP55 Weight: 530kg Accessories: Compressed air maintenance unit with shut-off valve  ...

Type: Turbomolecular pump, TPH series (Pfeiffer Vacuum) Type according to nameplate: TPH 1201 U P N Order number: PM P03 756 -A High Vacuum Flange: DN200 ISO-F Backing Connection: Small Flange (KF) Pumping speed N2: 1250l/s Rated Speed: 37800min-1 (630Hz) Oil according to nameplate: PM 016 144 -T Weight pump according to nameplate: 43kg Power supply: Pfeiffer Vacuum OPS 900, built-up, Model No. PM C01 780 Input Power Supply: 208-240V AC ±10%, 50/60Hz, 1100VA, 6A Output Power Supply: 140V DC ±3%, 900W, 6.7A Weight power supply according to nameplate: 5.8kg Power Supply Connectors: AC In, DC Out, LED Indicators Tmax and Output ok Power supply marking: TÜV Rheinland, Safety approved USA/CAN, SEMI S2 tested Accessories: Power supply OPS 900 mounted on the pump. Auction-ID: A7-52036-122

Type: Turbomolecular pump, TPH series (Pfeiffer Vacuum) Type according to nameplate: TPH 1201 U P N Order number: PM P03 756 -A High Vacuum Flange: DN200 ISO-F Backing Connection: Small Flange (KF) Pumping speed N2: 1250l/s Rated Speed: 37800min-1 (630Hz) Oil according to nameplate: PM 016 144 -T Weight pump according to nameplate: 43kg Power supply: Pfeiffer Vacuum OPS 900, built-up, Model No. PM C01 780 Input Power Supply: 208-240V AC ±10%, 50/60Hz, 1100VA, 6A Output Power Supply: 140V DC ±3%, 900W, 6.7A Weight power supply according to nameplate: 5.8kg Power Supply Connectors: AC In, DC Out, LED Indicators Tmax and Output ok Power supply marking: TÜV Rheinland, Safety approved USA/CAN, SEMI S2 tested Accessories: Power supply OPS 900 mounted on the pump. Auction-ID: A7-52036-124

Vacuum table machine WEBOMATIC Single-chamber machine -NEW- 230 Volt Chamber size: 370x400x130 mm Sealing strip: 1 x 350 mm with pexiglass lid

Kat-No 10-1271 New Container capacity: approx. 15 litres Batch size: 3-10 litres Material: stainless steel V2A 1.4301 Frame construction: mobile Double coat Insulated 3 bar Homogenizer 5.5 kW 500-3000 RPM Agitator 0.5 kW 30 RPM Scraper stirrer 0.18 kW adjustable 10-45 UPM Automatic vacuum control 0.55 kW Lid can be folded manually Display of product temperature Template container left 3 litres for powder components Template container on the right 3 litres for liquid components The price is valid for a process system. For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share ...

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Rietschle vacuum pump CLF 60V 60m3/h, 1400rpm, intake pressure 1 torr, 1.5 KW

Stacking mass (LxWxH)- 16m x 1.4m x 1.6m fully automatic drying via computer Heating capacity - 90 kW Top Condition

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 11-3315 in a very good condition for Cosmetic and Food Stuff Pressure Tanks with Agitator: Total Capacity: 13.320 Litres – capacity for use: 10.000 Litres Manufacturer: Schwarz Year of Construction: 1999 Material: dished bottom and jacket: 1.4539 flange for agitator, spout and cup sleeve for temperature sensor: 1.4539 other Stutzen: 1.4571 insulating jacket and pipe legs: 1.4301 (V2A) Attachments: 1.4404/1.4571 Seals: Viton Operating Instructions available For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Producer: Handtmann Type: VF 50/80 Output: 4 kW Weight: 450 kg Dimensions: Width 525 x length 844 x height 1600 mm Connection: 400V/50 Hz Vacuum filler HANDTMANN typ VF 50/80 - Without loading - MC control - Serving setting from 5 g to 1000 g - Filling pressure up to 55 bar - Portion and turn up to 420 portions / minute - Without calibration gear and without intestinal clamp - Capacity up to 2.600 kg / h - Funnel 80 L Portioning speed: 25 g = 420 portions / minute 50 g = 350 portions / minute 100 g = 250 portions / minute 200 g = 160 portions / minute Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Cat. No. 12-2450 in a very good condition Manufacturer: Disho Koruma Motor number: 155343 Type: VP 180/3300 Width: 2064 mm Length: 3040 mm Height: 3470 mm Weight: 4200 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

sell used vacuum pump

; ready for operation

; ready for operation

Handtmann VF 200 Filling portioning linking MC control Loading device The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

Manufacturer: LOGIPACK Type: TF-XM Power: 2 kW Weight: 210 kg Dimensions: 900 x 650 x 1600 mm Power supply: 400 V, 50/60 Hz -Made of stainless steel -Vacuum + possibility of fumigation -Control MC -Single Chamber 2 trays at the same time -Internal dimensions of the Chamber 400 x 290 x 200 mm -Dimensions of the shell 220 x 140 mm -Internal tool dimensions of 215 x 130 mm -Maximum foil width 430 mm -Pump 40 m3/h Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Manufacturer: BUSCH Type: RC 0025 E501 Capacity: 25 m3/h Vacuum pump BUSCH type RC 0025 E501 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Handtmann VF 80 vacuum filling machine, filling, portioning, linking. The machine is currently in the refurbishing and will be available soon. It can be tested in Koblenz, Germany.

; ready for operation

; ready for operation

; ready for operation

Vacuum filler Robby, filling, portioning, linking, pc control. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Handtmann VF 50 vacuum filling machine for filling, portioning, linking, MC-control, filling capacity up to 2,600 kg/h, pressure up to 55 bar, 420 port./min, portioning from 5-100.000 g., with linking device. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel.

Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.