SIDEROS used machine for sale

Technical data: Application: Laser, plasma and oxy-fuel cutting, grinding & welding Materials: Steel and stainless steel sheets, dry and oil-free Cartridges / solenoid valves: 6 / 6 Nominal volume flow: 3,600 m 3 /h (with cartridge load of 600 m³/h) Filter area: 84 m² (21 m² per cartridge) Dust collecting container Air input diameter: 300 mm air outlet diameter: 350 mm Air temperature/humidity: < 60 ° C / < 50% Permissible concentration of oil: 3 mg / m ³ Compressed air: min. 6-7 bar at the feed point, dry and oil-free Compressed air consumption: Max 18 nm ³/h - ± 50 NLiter per pulse with max 6 per minute Filtration degree: 99.99% Dust emissions: < 1 mg / m ³ Cabinet: 400 V, 3-phase, 50/60 Hz Control unit: 24 VAC, 50 Hz Noise level: < 73 dBA ± 2 dBA plus pulse charge of < 10 dBA ± 2 dBA Colour: RAL 5015 width x depth: 1.305 x 1.382 mm Weight: 640 ...

Technical data: Application: Laser, plasma and autogen cutting, grinding and welding materials: steel and stainless steel sheets, dry and oil-free cartridges / electric valves: 6 / 6 Nominal volume flow: 3,600 m3/h (at cartridge load of 600 m3/h) Filter area: 84 m2 (21 m2 per cartridge) Dustcollection of Air input diameter: 300 mm Air outlet diameter: 350 mm air temperature/humidity: < 60 C / < 50 % Total oil concentration: 3 mg/m3 compressed air: at least 6-7 bar on Feed-in point, dry and oil-free compressed air consumption: max. 18 Nm3/h - x 50 NLiter s per pulse with max. 6 per minute Filter level: 99.99% Dust emission: < 1 mg/m3 control cabinet: 400 V, 3 phases, 50/60 Hz Control unit: 24 VAC, 50 Hz Geraeusch Level: < 73 dBA x 2 dBA plus pulse surcharge of < 10 dBA x 2 dBA Color: RAL 5015 Width x Depth: 1,305 x 1,382 mm Weight: 640 kg Engine: 7.5 kW 13.2 A 32 A 4.234 Pa ...

1 piece Sideros suction system type ECO 6 HC, 9000m3/h for plasma and firing cutting systems for suction firing table from 2.5 m - 3.0 m width (at 500 mm module width) suction and filter system with integrated fan, automatic, dust-duty filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,500 m3/h and a static pressing of max. 2,500 Pa. Filter class M with a separation degree of > 99.9% (BIA use category U,S,G,C). Technical data: volume flow fan 9,000 m3/h Volume flow Filter: 4,000 m3/h Press: 2. 500 PA filter area 60 m2 filter type: PTFE membrane separation degree: > 99.9% cleaning: rotary duesen connection power: 5.5 kW, 10.7 A voltage: 3 x 400 V, 50 Hz compressed air connection: 6.0 bar sound level: < 68 dB (A) dimensions: height: 2,100 mm Depth: 1,413 mm Width: 1,413 mm Weight: 62 ...

; and cutting as new, Demonstration

For CNC plasma and cutting cutting systems 1 stueck Sideros suction system type ECO 4 HC, max. 5000m3/h for plasma and firing cutting systems for suction firing table from 1.5 m width (at 500 mm module width) APPLICATION dust and smoke extraction systems on plasma and firing cutting systems ( plasma up to 130 amps). Cutting of steel and stainless steel sheets. suction and filter system with integrated fan, automatic, dust-duty -cleaner filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,000 m3/h and a maximum of 2,500 Pa. filter class M at a separation degree of > 99.9% (BIA use category U,S,G,C). dimensions: Height: 2,100 mm depth: 1,413 mm Width: 1,413 mm Weight: 620 kg Air entry: NW 200 - 250 mm Price 6,990.00 EUR (price + VAT ex works, excluding pipelines, installation and commissioning);  ...

; mint condition, ready

Max. load: 2.5t, connected load: 4kW, weight: 1.477t.

Sells SIDEROS Rotoclean brand deburring barrel Year of manufacture 2019 Very little used, almost new tank interior,

filling capacity: 300 kg max. workpiece height: 500 x 200 x 20 mm workpiece weight: 200 kg max. workpiece weight: 15 kg / Stck. revolutions per minute: 22 U/min filling amount: 40-50 % Colour: blau 5015 RAL 0: 625 x 270 mm total power requirement: 1,5 kW weight of the machine ca.: 650 kg range L-W-H: 1 x 1,7 x 1,29 mm Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is i ...

filling capacity: 300 kg max. workpiece height: 500 x 200 x 20 mm container volume: 158 l workpiece weight: 175 kg max. workpiece weight: 15 kg / Stck. revolutions per minute: 22 U/min filling amount: 40-50 % Colour: blau 5015 RAL 0: 624 x 270 mm total power requirement: 1,5 kW weight of the machine ca.: 650 kg Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included ...

filling capacity: 800 kg max. workpiece height: 900 x 300 mm workpiece weight: total 500 kg container volume: 878 l max. workpiece weight: 30 kg/Stck. revolutions per minute: 22 U/min filling amount: 50-60 % Colour: blau 5015 RAL 0: 1175 x 440 mm total power requirement: 3 kW weight of the machine ca.: 1995 kg dimensions of the machine ca.: 2,9 x 1,33 x 1,75 m Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds to 800 kg consisting of 500 kg workp ...

weight max. in kg: 2000 kg Working height minimal: 350 mm Working height maximum: 1800 mm max. torque: 3000 Nm 0: 1 U/min adjustment speed: vertikal 560 mm/min vertical adjustment: 1450 mm baseplate diameter: 600 mm rotation movement: 0,75 kW stroke drive: 1,85 kW height of the plant: 2505 mm weight: 1047 kg Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical360° left/right rotation. A typical configuration is composed of a motorized headstock p ...

weight max. in kg: 1250 kg Working height minimal: 540 mm Working height maximum: 1120 mm table diameter: 800 mm swivelling range: --> 95 Grad max. torque: 490 Nm table rotation speed: 2 U/min Working height from to: 540 - 1120 vertikal mm Working height from to: 700 - 1280 horiz. mm total power requirement: 2,53 kW weight of the machine ca.: 757 kg dimensions of the machine ca.: 1,76 x 1,63 m Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mm table load: 2 t swivelling range: --> 95 Grad max. torque: 1250 Nm table rotation speed: 2 U/min Working height from to: 550 - 1300 vertikal mm Working height from to: 650 - 1400 horiz. mm total power requirement: 2,53 kW weight of the machine ca.: 930 kg dimensions of the machine ca.: 1,85 x 1,66 m Electric 400 Volt: Hand control panel: Hydraulic-device: Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.