We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Plate transport trolley - Swivel from vertical to horizontal position - Hydraulic height adjustment - Support size 2500 x 1500 mm - Load capacity 250 kg Available from January 2024!
new
technical details: - motor band oscillation - pneumatic belt tension - small support table on the pulley - Swivel range grinding track rear wall: 90° - 180° - Dimensions grinding track back wall:850 x 150 mm - Grinding track back wall glued with a graphite sliding lining - Band size: 150 x 2,280 mm - Steel table adjustable in height by spring pressure - Table size: 750 x 350 mm - Belt speed: 22 m/sec - Roll diameter: 140 /80 mm - Diameter suction nozzle: 100 mm - Bracket (included) - Miter stop (included) - Switch-plug combination - Motor protection and main switch according to VDE - Dust tested (GS) Holz-BG-Stuttgart (when connected to an extraction system with an air velocity of at least 20 m/sec) - Weight: 200 kg Sound power level (DIN EN ISO 7346) - No-load: 91 dB(A) - Processing: 91 dB(A) Workplace-related emission value (DIN EN ISO 11202) - No-load: 83 ...
used
Edge grinding machine Rehnen -new- Type: Junior R 1 with motor band oscillation with support table at the deflection roller Additionally included in the scope of delivery is an angular and miter stop Engine power 2.2 kW Tape speed 22 m/sec Grinding belt dimension 2280 x 150 mm Abrasive back wall 850 x 150 mm Grinding unit swivelable 90 - 180° Grinding belt tension pneumatic Table size 750 x 350 mm The top in heavy casting with built-in three-phase motor 380 V, 2.2 kW 2850 rpm The machine is equipped with built-in switch-plug combination; Motor circuit breaker and main switch according to VDE Dimensions of the abrasive belt rear wall 850 x 150 mm the abrasive back wall is glued with a graphite sliding surface Steel table adjustable in height by spring pressure Grinding belt dimension 150 x 2280 mm The machine is supplied with 2 pieces of grindin ...
used
used
Description: Rehnen Special edge sander Brand: Rehnen Type: SK-1 M-No.: 432 Year of construction: 1999 General specifications: Sanding belt: 2,700 x 150 mm Drive motor: 4 kW Belt speed: 15 m/sec. Table dimensions: 345 x 2,000 mm Dimensions: 3,000 x 2,000 x 1,500 mm Weight: 560 kg Description: Stable universal edge sander for straight, round and curved workpieces Areas of application: radius, shaped parts and straight workpieces Radius sanding with 80 - 300 mm sanding rolls Curved workpieces (allowing R=80 mm to R=1000 mm sanding) for almost all straight and curved workpieces Use of the entire sanding belt by adjustable oscillation Solid work table with integrated dust extraction serial number: 432, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,200 x 1,400 mm, weight approx.: 250 kg
used
Motor output: 3 kW Table dimensions: 350 x 750 mm grinding band dimension: 150 x 2.280 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Rehnen KBA edge processing machine for grinding, profile milling and profile grinding of edges in one pass Pre-milling unit., processing aggregates: 6, feed: infinitely variable, Connected load: 10 kW, Min. workpiece thickness: about 10 mm, Max. workpiece thickness: approx. 110 mm, Aggregate 1: Pre-milling, Aggregate 2: grind, Aggregate 3: Rounding milling machine above, Aggregate 4: Rounding milling machine below, Aggregate 5: Profile milling machine below, Aggregate 6: Profile grinding below
new
Band width: 150mm; Band length: 2280mm; Table size: 750mm x 350mm; Additional table: 350mm x 300mm; Veneer grinding device: no; Oscillation: yes; Swivel grinding unit: yes; Suction connection: 120mm; Motor power: 2.2 kW; Machine length: 1000mm; Machine width: 800mm; Weight: 200kg;
new
racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is a space-saving and gentle solution for storing painted workpieces. The four swivel castors mean that it can also be used for transporting workpieces. Its solid tube frame design can be adjusted between 200 mm and 2,000 mm. With 17 inside and outside plastic-coated support tubes on each side, the rack can support up to 400 kg of evenly distributed weight. The plug-in inside and outside support tubes can be taken out and re-inserted as needed. When not in use, the drying rack can be collapsed and takes up minimal space.