PINACHO used machine for sale

Key data: 530 mm, 3000 mm

Turning length: 3000 mm Rotation diameter: 530 mm above bed / 315 mm over cross slide Control: Fagor 8055 Spindle speed: 2,000 rpm min. max. Spindle bore: 105 mm Tool turret: 8 positions Equipped with: - 2 fixed bezels - 1 moving bezel Country of origin: Spain Engine power: 11 kW Machine weight: 4000 kg Machine LxWxH: 4000 x 1700 x 1800 mm

Inv. Num. : 6889 Type: Taurus 260 Producer: Pinacho Created: 2000 Parameters: Control system: FAGOR Maximum turning length: 1500 mm Maximum turning diameter: 520 mm Maximum main spindle power: 11 kW Minimum main spindle speed: 40 1/min Maximum spindle speed: 2500 1/min Number of tools: 8 pieces Spindle bore: 80 mm Length: 4000 mm Width: 1800 mm Height: 1850 mm Weight: 3500 kg Equipment: Bezels (2 pieces)

Key data: 450 mm, 1500 mm

Machine Details Stock-No. 1105-03977 Type of machine Lathe - cycle-controlled Make PINACHO Type Smart turn 8 225 Year of manufacture 2013 Type of control CNC Storage location HAGUENAU Country of origin Spain Delivery time immediately Freight basis ex works Technical details turning diameter 450 mm turning length 1500 mm control FAGOR TC 8055 total power requirement 15 kW weight of the machine approx. 3 t dimensions of the machine approx. 2.29X1 X 1.2 m Additional information TEACH IN CNC LATHE Pinacho offers the CNC flat bed lathe ST-225. This is a fast and accurate machine up to 450 mm in swing over bed, 1500 mm in distance between centers and 65 mm in spindle bore. 2 or 3 axis parallel lathes combined with Fagor controL. The available power up to 15 kW in addition to the high rotary speed and low vibrations provided by the servomotor and headstock design make  ...

Pinacho S90-310 lathe. Distance between centers: 1.625mm. Swing: 620mm. Swing over carriage: 425mm. Swing in gap: 880mm. Bore: 80mm. 12 speeds: 30-1500rpm. Motor power: 7,5cv. Equipped with chuck. Equipped with DRO Heidenhain. CE.

Very good condition Control type Siemens Sinumerik workable length 1.500 mm Turning diameter on carriage Ø 500 mm Max bar passage Ø 78 mm Spindle diameter Ø 250 mm Spindle speed 2,000 rpm Spindle power 22 Kw Spindle type ASA 8 Duplomatic tool station 8 positions Chip Evacuator Accessories

- First ownership: from own use and first hand - Center height: 180 mm - Center width: 1000 mm - Diameter over bed: 360 mm - Bed width: 250 mm - Diameter of the main spindle: 42 mm - Control: Fagor 8055 TC - Constant cutting speed: 100-4000 rpm - Working feed Z.X: 0-7000 mm/min - Rapid traverse Z.X: 10 m/min - Main engine 5.5 kW

No. 5197: 1 Gebr. Cycles Lathe Fabr. PINACHO, type Mustang 200, Bauj. 2001

turning diameter:402 mm turning length:750 mm control:FAGOR 8037 turning dia. over face-slide:245 mm turning diameter over bed slide:380 mm bed width:250 mm spindle taper:A2-5 spindle speeds:40~2800 (3 Stufen) 1/min. spindle bore:42 mm tailstock quill diameter:58 mm tailstock quill stroke:180 mm taper of tailstock quill:4 MK max. length of work piece:750 mm power requirement:4 kW weight of the machine ca.:1050 kg dimensions of the machine ca.:2000x1115x1670 (LxBxH) mm turret:8 fach CNC controller:FAGOR 8037 electronic hand wheel:für X- und Z-Achse New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TD Made in Europe For more information please see the attached documents

turning diameter:402 mm turning length:1000 mm control: 8055 turning dia. over face-slide:245 mm turning diameter over bed slide:380 mm bed width:250 mm spindle taper:A2-5 spindle speeds:40~2800 (3 Stufen) 1/min. spindle bore:42 mm tailstock quill diameter:58 mm tailstock quill stroke:180 mm taper of tailstock quill:4 MK max. length of work piece:750 mm power requirement:4 kW weight of the machine ca.:1050 kg dimensions of the machine ca.:2250x1115x1670 (LxBxH) mm turret:Multifix CNC controller:FAGOR 8055 electronic hand wheel:für X- und Z-Achse New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TD Made in Europe For more information please see the attached documents

turning diameter:450 mm turning length:1000 mm control:FANUC OI TF max. swing over slide:260 mm bed width:300 mm spindle taper:A2-6 spindle speeds:0-3000 1/min. spindle bore:65 mm transmission ratio:1 tailstock quill diameter:68 mm tailstock quill stroke:200 mm taper of tailstock quill:4 MK max. length of work piece:1000 mm rapid traverse x/z:12/15 m/min power requirement:9 kW weight of the machine ca.:1400 kg dimensions of the machine ca.:2800x1215x1750 mm automatic tool changer:8-fach CNC controller:FANUC OI TF tools:1 Satz 3 jaw chuck Ø:200 mm live center:4 MK :aus Guss New CNC lathe KRAFT ST 225/1000 with FANUC 0i mate TD Made in Europe For more information please see the attached documents

turning diameter:620 mm turning length:2.000 mm turret (x-stations):8 tool taper:VDI 40 turning diameter over bed slide:415 mm control:8055 TC FAGOR spindle bore:80 mm rapid power traverse in X-and Z direction:10 m/min speeds:0-650 / 650-2.500 1/min total power requirement:28 kVA weight of the machine ca.:3,6 t dimensions of the machine ca.:4,6 x 2 x 1,8 m teach-in lathe with tailstock MT 5, 8-hole turret, 3 jaw-chuck

turning diameter:360 mm turning length:1000 mm control:Fanuc Oi-TF turning diameter over bed slide:300 mm max. swing over slide:190 mm bed width:250 mm spindle taper:A2-5 spindle speeds:0-4000 1/min. spindle bore:42 mm tailstock quill diameter:58 mm tailstock quill stroke:180 mm taper of tailstock quill:4 MK max. length of work piece:1000 mm rapid traverse x/z:15/12 m/min power requirement:7,5 kW weight of the machine ca.:1200 kg dimensions of the machine ca.:2250x1115x1630 mm automatic tool changer:8-fach CNC controller:Fanuc Oi-TF tools:1 Satz foundation bolts:1 Satz New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TD Made in Europe For more information please see the attached documents

turning diameter:1010 mm turning length:4000 mm control:FANUC OI TF max. swing over slide:718 mm bed width:500 mm spindle taper:A2-15 spindle speeds:0-1400 1/min. spindle bore:130 mm transmission ratio:2 tailstock quill diameter:120 mm tailstock quill stroke:300 mm taper of tailstock quill:6 MK max. length of work piece:4000 mm rapid traverse x/z:10/10 m/min power requirement:22 kW weight of the machine ca.:9500 kg dimensions of the machine ca.:6557x2202x2487 mm max. workpiece weight between centers:8600 kg automatic tool changer:8-fach CNC controller:FANUC OI TF tools:1 Satz coolant system:6 bar New CNC lathe KRAFT ST 500/3000 with FANUC OI TF Made in Europe For more information please see the attached documents

Distance between centers: 1625 mm Max swing over bed: 520 mm Bed length: 350 mm Swing over longitudinal carriage: 470 mm Swing over cross carriage: 320 mm Swing in the gap: 770 mm Spindle hole diameter: 68 mm Main motor power: 7.5 CV Equipped with: 3-jaw universal chuck: Ø 310 mm Turret: Yes

Description: PINACHO Mustang CNC Lathe machine number: 41101 control unit: Steuerung Fagor 8055 TC tecnical details: center height: 200 mm distance between centers: 1000 mm permitted diamter over guide travel: 400 mm permitted diameter over longitudinal slide: 370 mm permitted diameter over cross slide: 210 mm bed width: 300 mm headstock bore hole main spindle: 65 mm main spindle Nase Camlock no. 6 DIN 55027 morse taper of main spindle: 5 spindle speed 2 constant cutting speed 1st step 0 - 700 rpm, 2nd step 700 - 3000 rpm feeds working range Z, X: 0 - 7000 mm/min. rapid traverse Z, X: 10 m/Min. tailstock shaft diameter: 58 mm tailstock shaft path 155 mm morse taper tailstock: 4 motors: power main motor: 7.5 kW power direct current motor Z-axis in Nm: 12 Nm power direct current X-axis: 4 Nm power of motor pump: 0.57 kW further details: without clamping jaw chuck, with foot switch seri ...

: gebraucht : 1999 : 1676 : prompt, Zwischenverkauf v : Spanien : 10500 € : 1 : 335 mm : 750 mm : 165 mm : 42 mm : 175 mm : 250 mm : DIN55022-5 Nr. 4 : 60-2000 (9) 1/min : 0.05 - 0.75 mm/U : 0.025 - 0.375 mm/U : 0.5 - 7.5 mm : 60 : 245 mm : 120 mm : 48 mm : 3 MK : 140 mm : 2.2 kW : 1900 mm : 850 mm : 1485 mm : 880 kg 3-Jaw chucks Röhm Dm. 300 mm 4-fold steel holder with 4 inserts Chuck protection Cranking length 120 mm Sliding rotary guard with integrated machine lamp Rear chip splashboard Cooling equipment Lead screw and draw screw cover Foot brake User Manual in English COMPLIES WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FAGOR 8055TM CNC Description: - Distance between points: 1,000mm - Point height: 260mm - Diameter over bench: 530mm - Diameter admitted on longitudinal carriage: 475mm - Diameter admitted over cross slide: 315mm - Bench width: 350mm - 2 spindle speed ranges: from 0-625 rpm and from 625 to 2500 rpm - Work advances Z and X axes in mm/min.: 0-7000 - Rod pitch: 72mm - DUPLOMATIC turret with 8 tools It has all the manuals for both the lathe and the Fagor cnc. All tool holders and chuck jaws seen in the photographs are included. In 2021 a retrofitting was carried out. - Bench grinding - Preset spindles and axis nuts + change of axis balls - Change bearings axles + belts

Distance between centers: 1650 mm Centers height: 225 mm Max swing over bed: 440 mm Swing over cross slide: 260 mm Swing over gap: 640 mm Spindle hole diameter: 52 mm Gap length: 160 mm Spindle speeds: 12, 32-1800 rpm Motor power: 5.5 CV Equipped with: 3-jaw universal chuck: Ø 250 mm Set of jaws: 1

- Distance between points: 1,000mm - Point height: 260mm - Diameter over bench: 530mm - Diameter admitted on longitudinal carriage: 475mm - Diameter admitted over cross slide: 315mm - Bench width: 350mm - 2 spindle speed ranges: from 0-625 rpm and from 625 to 2500 rpm - Work advances Z and X axes in mm/min.: 0-7000 - Rod pitch: 72mm - DUPLOMATIC turret with 8 tools It has all the manuals for both the lathe and the Fagor cnc. All tool holders and chuck jaws seen in the photographs are included. - Bench grinding - Preset spindles and axis nuts + change of axis balls - Change bearings axles + belts

Ref. -No.: 10314 Manufacturer: PINACHO Year of construction: 2005 Type of control: Konventionell Storage location: Halberstadt Country of origin: Spain Travel quill: 180 mm Turning Diameter: 630 mm Turning Length: 3000 mm Turning Diameter Over Bed: 620 mm Cross Movement. (X-Axis): 365 mm Tailstock Quill Diameter: 72 mm Turning diameter over cross slide: 880 mm

Type: S90/285-155 double chuck lathe! Distance between centers: 2000 mm Swing over bed: 830 mm Swing over cross-slide: 525 mm Diametre of main spindle bore: 155 mm Power on main spindle: 7,5 kW Number of speeds: 12 > 750 rpm Digital screen: yes Length: 3100 mm Width : 1000 mm Height: 1800 mm Weight: 3 ton

Equipped with SK-kit: - auto toolchanger 8 positions - VDI-type - hydraulic chuck - hydraulic counter-point - hydraulic center Swing over bed: 620 mm Swing over cross-slide: 580 mm Distance centre tot centre: 2000 mm Dia of spindle bore: 80 mm Power on the spindle: 11 kW Number of speeds: 1 > 2500 rpm Command: Fanuc Toolchanger: yes Number of tools: 8 positions

Metall lathe manufactured by PINACHO type L-1/165Masch. -No: 11782Technical specifications:Tip height: 165 mmDistance between centers: 750 mmTurning diameter over bed: 330 mmTurning diameter in the crank: 480 mmSpindle bore: 42 mmSpindle mount: DIN 55022/518 spindle speeds: 30 - 2000 rpm.20 feeds: 0.047 - 0.86 mm / rev20 cross feeds: 0.021 - 0.39 mm / rev20 metric threads: 0.5 - 916 WW threads: 56 - 4 Gg / 1 20 module thread: 0.25 - 4.5 MDrive power: 2 / 3.8 HPDimensions: 1645 x 820 x 1260 mmWeight approx .: 800 kgWith- Three-jaw lathe chuck 200 mm- Multifix steel holder with multiple inserts- moving center pointused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regar ...

Pinacho Rayo 180 Ø 360 x 1000 mm CNC Swing over bed: 360 mm Swing over cross-slide: 198 mm Distance centre tot centre: 1000 mm Dia of spindle bore: 42 mm Power on the spindle: 5,5 HP Number of speeds: 100 > 4000 rpm Command: Heidenhain Length: 2870 mm Width: 1510 mm Height: 1550 mm Weight: 1,5 ton

Center height: 165 mm Center distance: 750 mm Spindle bore: 58 mm CNC Brand: Fanuc CNC Model: Oi Mate MACH-id    5214 MAKE        Pinacho Spain TYPE          SMART 6 YOP            2009 SPECIFICATIONS Max. turning diamter Ø     335 mm DBC Turning length        750 mm X-Axis         700 mm Y-Axis          250 mm Spindle bore      58 mm Main Spindle speed     4000 Rpm Control        FANUC Oi MATE - TC Hours          700 H DIMENSIONS Length     2100 mm Width      1400 mm Height      1600 mm

Center height: 225 mm Center distance: 1150 mm Spindle bore: 65 mm CNC Brand: Fagor CNC Model: 8055 PINACHO - MUSTANG 225 Cycle Teach-In lathe 450 x 1150 mm MACH - ID 6349 Make: PINACHO Type: MUSTANG 225 Control: Fagor 8055 YOP: 2004 Swing over bed Ø   450 mm Swing over cross slide Ø    260 mm DBC Turning Length      1.150 mm Spindle bore       65 mm Spindle power    8 kW Bed width           300 mm Tailstock spindle Ø     58 Ø Stroke pinole    115 mm Spindle taper    4 Mk Speeds / ranges     3000 Rpm Feed rate X-Axis    7.000 mm Feed rate Z-Axis     7.000 mm Dimensions Length     3.400 mm Width      1.800 ...

Type: Smart Turn 5/260 Swing over bed: 560 mm Swing over cross-slide: 315 mm Distance centre tot centre: 3000 mm Dia of spindle bore: 80 mm Power on the spindle: 11 kW Number of speeds: 1 > 2500 rpm

turning diameter: 520 mm turning length: 1625 mm control: FAGOR 800 TG greates pass round over bed: 530 mm swing diameter over slide rest: 475 mm centre height: 260 mm bed width: 350 mm main spindle bore: 68 mm turning speeds: 1500 U/min rapid traverse: 5 m/min Drive: 10 kW total power requirement: kW weight of the machine ca.: 1,87 t dimensions of the machine ca.: 2,8x1,4x1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.