MUELLER used machine for sale

Offer 24163 Technical data approx.: - Compressive force 135 t - Projection 350 mm - Table size approx. 1000 x 680 mm - Through-hole in the table mm - Maximum installation height approx. 460 mm - Plunger area 350 x 280 mm - with lateral cantilever, left + right, 125 x 200 mm - Tenon hole in the ram 50 mm - Plunger adjustability 65 mm - Stroke adjustment 20 - 180 mm - Stroke rate approx. 50 /min - Movable shielding, retrofitted in 1991 - Pneum. Actuated rotary wedge coupling - Drive 400 V / 7.5 kW - Space requirement approx. W 1500 x H 2550 x D 1800 mm - Weight approx. 9000 kg

4 MüLLER jacquard needle looms for labels and trimmings with woven soft selvedges, composed of: 1 MÜLLER type MVC2 200 14/36 768/448, year 1998, taffeta machine 1 MÜLLER type MVC 200 15/30, year 1995, satin machine 1 MÜLLER type MVC 200 20/20, year 1994, satin machine 1 MÜLLER type MVC 150 8/46, year 1991, satin machine

Enquiry number 390298 Machine type: Müller sharpening machine UR4-4 Working range wires and rods: from Ø 4 to Ø 22 mm / tubes: Ø 4 to Ø 44 mm Make Heinrich Müller, type: Rotary kneading machine UR4-4 Year of construction 2004 Location: Solingen Country of origin: Germany Delivery time Immediately possible

Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons

ID2753 Müller MS16 HFV year/Year of construction 1999 approx. 3900 hours/hours 3.5 t Vibrator, with hydraulic unit MS-A360V, clamps MSU140 for steel sheet piles and 30 m of hydraulic hoses Vibrator, with hydraulic power unit MS-A360V, clamps MSU140 for steel sheet piles and 30 m of hydraulic hoses

Hydraulic Press 400 ton Nominal Power 400 ton Slide Stroke 800 mm Slide dimension 1300 x 1600 mm Table dimension 1300 x 1600 mm Cushion Stroke 350 mm . ELECTRICAL SYSTEM COMPLETELY REBUILT IN 2020

Inv. Num. : 6682 Type: PDE 100 RF-HK Producer: Müller Created: 2000 Parameters: Control system: SIEMENS SIMATIC Compressive force: 1000 kN Stroke length: 330 mm Maximum stroke rate per minute: 55 1/min Adjustment of the plunger: 100 mm Main engine power: 11 kW Machine height: 2600 mm Machine length: 2200 mm Machine width: 2000 mm Machine weight: 7500 kg Equipment: Technical Documentation

Mueller Label Weaving Machine (Used) Model MBJ3 Year 2007 Jacquard 1152 Hooks 5800 yarns. Accessories on the machine: - 6 weft feeders 2 beams 2 cloth rollers new harness Droppers.

1 MÜLLER label cut and fold machine type LCFR2, year 2017

Horizontal band saw / Müller HBS 230G /miter Cjkvx8b8yz with roller conveyor front/rear Cutting area - approx. 230mm Cutting area - square 230x230mm Cutting area - flat / portrait 250x230mm Cutting area - flat/flat 280x170mm At 45 degrees miter approx. 175mm At 45 degrees square 165x165mm at 45 degrees / flat / portrait 145x230mm At 45 degrees /flat 175x170mm at 60 degrees / miter round 170mm At 60 degrees /square 90x90mm At 60 degrees / tray / portrait 90x90mm At 60 degrees /flat 110x80mm Main engine / power 1,1 KW Speed range 30 - 60 m/min Band saw blade size 2700x27x0,9mm Dimensions: LxWxH 1400x800x1500mm Weight approx. 300Kg

1 MÜLLER air jet label loom MÜJET 2S type MBJL 2S 115, specification SPE5 1536/1152 T, year 10-2001, commissioned in 2002, tafeta machine, 8 colours, 740 rpm, MÜDATA 300, machine delivered with 3 weft feeders, 1 warp beam, 1 cloth roller, 20 thermal cutters

Specifications: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Diarrhea hole in the table approx. 300 x 200 mm - maximum installation height approx. 360 mm - Stösselfläche approx. 340 x 160 mm - Cone hole in the plug 40 mm - Plug adjustability 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - 2 hand operation - Pneumatic connection 6 bar - Flywheel drive / speed infinitely adjustable - Rotary wedge coupling - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 4500 kg - mechanical clamp feed MABU type ZPL 11 with 3 roller straightener

a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.

CNC Engraving Machine MÜLLER LCF - 2 Travel: X 375 mm Y 570 mm Z 90 mm Technical0.321020121002 Data: Table size 700 mm x 480 mm Weight: 50 kg Exterior dimensions: Length: 700 mm Width: 500 mm Height: 350 mm Accessories: Computer Screen Keyboard Mouse Software Control Kress cutter Vacuum pump Valve Spray Mist With this, versch. Collet and cutter - NEW

Mueller milk cooling tank Model: RHS200 Serial: 31886 800L stainless tank, RHS milk coolers are designed for small quantities of milk, R12 refrigerant, top mounted stirrer, can also be used to heat a fluid or simply to keep isolated and warm/cold.

Kettenstemmer Müller Wall mounting L x W x H: 60 x 40 x 170 cm Weight approx. 270 kg Built in 1973 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Description: Extruder Müller ELK 60-28 Manufacturer: Müller Type: ELK 60-28 Year of construction: 1995 Condition: very good Type of offer: second-hand machine Location: D - North Rhine-Westphalia Technical data: Müller extruder machine 40,000 h Runhour type: ELK 60-28, profile extruder control:-year: 1995 injection unit screw diameter mm: 60 other ELK 60-28 d 57 KW

New machine editing by: wood, plastic, PVC, Fiberglass, Plexiglas, non-ferrous metals such as aluminum, brass, etc. Technical data: Auflöstung: 0,0018 mm X-Y-Z of precision trapezoidal thread spindles 12 x 3 mm All drive spindles are without triple play ball bearings Table size: 506 mm x 320 mm Traverse paths: x 215 mm, y 375 mm, z approx. 90 mm Passage about 78 mm Prices and further sizes on request

Max. working width: 2000mm, min. cutting width: 10mm, core diameter: 76/ 152mm, circular knife diameter: 100mm, max. wall thickness: 10mm, with documentation, the machine was hardly used.

Pressing force: 100t, throat depth: 300mm, stroke speed: 60/min, stroke adjustment: 10-100mm, motor power: 7,5hp.

Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation.

Description: Press line consiting of, 6x MÜLLER Hydraulic double column deep draw presses Type: (2x) ZE 630 Year of manufacture: 1962 and 1963 Capacity: 630 ton Ram weight: 19.000 kg Max. punch weight: 47.000 kg Max. tool dimensions: 2460 x 1900 mm Min. installation height: 710 mm Max. installation height (only for cutting tool): 1060 mm Machine dimensions: approx. 4000 x , 2000 x 5500 mm Machine weight: approx. 150.000 kg  , Type: (4x) ZE 400 Year of manufacture: (2x)1971, 1965 and 1960 Capacity: 400 ton Ram weight: (3x) 12.000 kg and (1x) 8.200 kg Max. punch weight: 16.400 kg Max. tool dimensions: (3x) 2460 x 1400 mm and (1x) 2040 x 1300 mm Min. installation height: 610 mm Max. installation height (only for cutting tool): 910 mm Machine dimensions: approx. 4000 x , 2000 x 5000 mm Machine weight: approx. 120.000 kg 7x Pick- and Place robots Manuf ...

pressure:40 t throat:285 mm stroke:500 mm Distance table/ram, stroke up:630 mm table surface area:560 x 560 mm pressure of drawing cushion in table:16 t stroke of drawing cushion in table:200 mm die cushion area:425 x 425 mm table height over floor:800 mm ram surface:450 x 450 mm power requirement:11,0 kW weight:4,0 t dimensions (WxDxH):1,15 x 1,8 x 2,85 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 light guard:Sick

pressure:315 t distance between columns:1290 mm stroke:700 mm distance table/ram, max. stroke up, adjustment up:950 mm table surface area:1250 x 1100 mm pressure of drawing cushion in table:125 t stroke of drawing cushion in table:300 mm die cushion area:900 x 900 mm Capacity of ejector in ram:20 t Stroke of ejector in ram:250 mm table height over floor:800 mm ram surface:1250 x 1100 mm oil volume:1200 l power requirement:40,0 kW weight:22,0 t dimensions (WxDxH):2,6 x 1,6 x 5,2 m height over floor:4,05 m drawing cushion in table:hydraulic ejector in ram:hydraulic cutting impact cushioning:hydraulic

plunger adjustable 40mm, stroke adjustment 4 - 60 mm, impact force 130 1/min, max load 100Kn, unloading 160mm, equipped with: clamping table 320x900mm, edge slide clamping tool, automatic lubrication system, external hydraulic unit, control box,

Pressure:315 t distance between columns:1350 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1200 x 1300 mm table height over floor:1245 mm side window:1250 mm ram surface:1200 x 1300 mm speed down:750 mm/s speed up:680 mm/s working speed:180 mm/s oil volume:2000 l power requirement:150,0 kW weight:35,0 t Dimensions (WxDxH):3,3 x 3,3 x 5,5 m height over floor:5,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact cushioning:motorisch verstellbar ram interlocking:hydraulisch

pressure:200 t throat:360 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:780 mm table surface area:740 x 720 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:200 mm die cushion area:530 x 530 mm table height over floor:920 mm ram surface:560 x 560 mm slide drill hole x depth:70 mm power requirement:35,0 kW weight:10,0 t dimensions:1,3 x 2,0 x 3,4 m

pressure:250 t distance between columns:1125 mm stroke:250 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1100 x 900 mm pressure of drawing cushion in table:63 t stroke of drawing cushion in table:100 mm die cushion area:700 x 400 mm table height over floor:960 mm side window:700 mm ram surface:1080 x 900 mm oil volume:1000 l power requirement:35,0 kW weight:23,0 t Dimensions (WxDxH):2,5 x 2,3 x 4,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick foundation pit:not necessary

pressure:100 t distance between columns:1060 mm stroke:700 mm distance table/ram, max. stroke up, adjustment up:1250 mm table surface area:1000 x 700 mm pressure of drawing cushion in table:40 t stroke of drawing cushion in table:200 mm die cushion area:Ø 250 mm table height over floor:950 mm side window:580 x 750 mm ram surface:1000 x 700 mm oil volume:700 l power requirement:47,0 kW weight:13,0 t Dimensions (WxDxH):2,2 x 1,8 x 5,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical; motoric adjustable ram interlocking:SITEMA

pressure:315 t distance between columns:1620 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1600 x 1100 mm pressure of drawing cushion in ram:20 t stroke of drawing cushion in ram:100 mm drawing cushion area in ram:300 x 300 mm side window:600 x 1100 mm table height over floor:750 mm ram surface:1600 x 1100 mm oil volume:1500 l power requirement:110,0 kW weight:35,0 t dimensions (WxDxH):4,65 x 2,61 x 5,5 m height over floor:5,05 m height beneath floor:0,45 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in ram:hydraulic ram interlocking:pneumatic cutting impact cushioning:hydraulic