KUPER used machine for sale

Tried-and-tested veneer spacing machine, veneer sewing machine from Kuper FW/M 630 T Projection 630mm Power supply 230V Shifting via foot pedal 3 spools of glue thread Threader Release The machine is set. You can get started right away. Operating instructions The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Proven veneer spacing machine, veneer sewing machine from Kuper FWJ920 Veneer thickness approx. 0.3 - 2mm Feed speed approx. 15 m/min Projection 920mm Power connection 380V / 0.45kW Automatic start via contact brush, interruption via foot pedal 1 spool of glue thread Threader Release Operating instructions The machine is set. You can get started right away. Original paint, only a few paint spots touched. Pressure reducer and all V-belts renewed Dimensions approx. 1350 x 500 x 1750mm (LxWxH). Weight approx. 185kg. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Code: 0240 Brand: KUPER – GERMANY Model: FW 1150 Veneer splicer Technical data : Throat depth mm 1150 Feed speed variator 10/30 mt/min Power kw 1,5 Veneer thickness 0,3 - 3 mm Current three-phase v 380 Compressed air 6 atm Overall dimensions mm 2100 x 700 x 1800 h Weight kg 530

Fabr: Kuper Type: FW Machine No: 0371 Year: 1966 Stand projection: 1150 mm Throughput speed: approx. 10 - 30 m min. Propulsion: Brake motor 0.55 kW 380 V, optionally 220 V three-phase current Total connected load: 1.8 kW Heating: 7 V 120 W Weight: 630 kg Space requirement: 2300 / 800 mm Crate dimensions: 2450 / 1450 / 900 mm Ship space: 3.2 m³

veneer assembler Modsell FW/M 630 year 95

Tried-and-tested veneer spacing machine, veneer sewing machine from Kuper FW/M 630 T Projection 630mm Power supply 230V Shifting via foot pedal 1 spool of glue thread Threader Release The machine is set. You can get started right away. CE Mark Operating instructions The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Veneer splicing machine Kuper type FW 1200 E Specifications: • Adhesive medium: glue thread

Veneer splicer Kuper FM Mini 630 T The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

SPECIFICATIONS: Min. length of veneer strip: 350 mm Min. width of veneer strip: 45 mm Veneer thickness: 0.3 - 1.5 mm Working height: 970 mm Temperature control: 0 - 200° C

Veneer splicing machine from KUPER, type FWM 630 max. veneer thickness : 2 mm min. veneer thickness : 0.4 mm Composite material : Glue thread with piston heating Machine type : Tabletop model Feed speed : 7 m/min Feed Type : Fixed Column projection : 630 mm #4716 Net prices plus VAT

SPECIFICATIONS Max. working length mm: 1150 Operation with wire

Fabr: Kuper Machine type: ST/I-1200 Machine number: 7560 Year: 1991 Power: approx. 51kW Working width: 1200mm PROVIDER

Used veneer gluing machine COW with or without tables Attention Item location: 58368 Werne The machine can be viewed. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to make an intermediate sale. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities. Company names and trademarks ar ...

see photos

Veneer assembly machine model FW 1100,

Veneer assembly machine model FWL 1200, Joining, gluing, thread and white gluing

Veneer gluer Kuper Stand unloading 630mm Feed approx. 7m/min Drive electric motor 25Watt, 190Volt Connection voltage 220Volt

Manufacturer: KUPER Type: FWQ 1800 Techical data of the overall machine: Overall dimension: 3150 x 1750 x 2100 mm (height) Max. working width in grain direction: 1900 mm Min. working width in grain direction: approx. 550 mm Veneer strip width across the grain: from approx. 65 mm Veneer thickness: approx. 0,4 - 2,5 mm Working speed of transport aggretate 2 settings: approx. 40 or 75 m/min. Infeed speed of transport belt: approx. 25 m/min Working height taken from floor: 900 mm Operating voltage, standard: 380 V, 3 Ph, 50 cycles Total connection value, incl. stacker: approx. 8 kW Power consumption, effective: approx. 2 kW Air pressure connection: 7 - 14 bar Operating power: 7 bar

SPECIFICATIONS: working length mm: 630 Dimensions of the workbench mm: 700 x 380

Kuper Veneer Zigzag Veneer Composition Machine, Type FW/ 1200-E Year of manufacture 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely adjustable zigzag width of the glue thread cutting device veneer thickness : 3.0 mm min. veneer thickness : 0.3 mm Glued thread with hot air heating Compressed air generation Discus for transporting the veneer over the veneer table Control via foot pedal Feed Speed: 35-60m/min Voltage: 400 V, 50 Hz Total power 1.35 kW Working height 915mm Bzunfcilke Weight approx. : 440 kg Dimensions : 2,12m x 0,73m x 1,55m

functional machine with minor defects

Longitudinal Splicer Manufactured by Kuper Model: FL/Rapid

Longitudinal Splicer Manufactured by KUPER Model: FL/I-1000 - FL/INNOVATION

Veneer splicer KUPER model FW1150 used

Description: Upright projection 1250 mm, minimum veneer strip length approx 350 mm, minimum veneer strip width approx 45 mm, veneer thickness approx 0.3 to 1.5 mm, feed speed approx 20 to 50 meters per minute, heating zone length 1200 mm, working height 970 mm, total connected load approx 9.3 kVA, drive 2.2 kW, voltage 400 Volt, with CE certificate, additional accessories: support table right, cooling unit, replacement hinge, belt chain Approx. Onsite Dimension. (l x w x h): 4,500 x 2,400 x 1,800 mm, weight approx.: 2,300 kg

Description: Projection: 900 mm Veneer thickness approx. 0.4 - 2 mm, Feed approx. 15 m/min, Drive motor 0.18 kW, total connection 0.5 kW, Space requirement LxWxH 1280mm x 580mm x 1470mm, Weight 166 kg. - NO CE certification! - PRICED IN RECONDITIONED CONDITION - SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly pointed out that this lot only corresponds to the scope of the lot description. If objects can be seen in the photo that are not expressly listed in the lot description, these are not part of the sale. part of the sale. This naturally also applies to tools, additional equipment, accessories, software, equipment, etc. (in relation to the photo and lot description). , Approx. Onsite Dimension. (l x w x h): 1,350 x 820 x 1,660 mm, weight approx.: 166 kg

Description: For assembling smooth veneers in the thickness range from approx. 0.4 to approx. 1.5 mm lengthwise. A special PVAc glue and the tried and tested Kuper special glue thread are used as the bonding medium. Kuper special glue thread is used in a super-thin quality (high yield). Min. veneer strip length: approx. 400 mm Veneer strip width: from 40 mm Material feed for butt gluing: approx. 15 m/min. Drive motor 0.55 kW, total connection 2.5 kW Air consumption: approx. 300 NL/min. Space requirement LxWxH 1700mm x 1020mm x 1600mm, Weight approx. 650 kg. SOLD IN FUNCTIONALLY TESTED CONDITION SOLD AS SEEN - WITHOUT WARRANTY ! Known defects: Sliding clutch bearing extremely loud. Heating for white glue defective. Discs for white glue application broken out Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly poin ...

Description: Projection: 900 mm Veneer thickness approx. 0.4 - 2 mm, Feed approx. 15 m/min, Drive motor 0.18 kW, Total connection 0.5 kW, Space requirement LxWxH 1280mm x 580mm x 1470mm, Weight 166 kg. SOLD AS SEEN - WITHOUT WARRANTY ! - NO CE certification Approx. Onsite Dimension. (l x w x h): 1,280 x 5,800 x 1,470 mm, weight approx.: 166 kg

Feed speed: , m/min. Dimensions (L/W/H): , mm total power requirement: , kw weight of the machine ca.: , kg Year: , 0 Arm length: , mm 1 KUPER veneer splicing machine FW Junior 920 --------------------------------- with air heating system. For sale on behalf of the customer in the IS condition! For assembling veneers with thicknesses of approx. 0.4 - 2.0 mm. A special glue thread is used as the adhesive medium and is zigzag or Wavy line is applied by a heated thread guide. Guaranteed tight joint, high adhesion and tear resistance even with very wavy surfaces Veneer. During subsequent pressing, the glue thread is placed inside. Sanding the adhesive medium is therefore not necessary. Easy to use and efficient way of working Method that has now been proven 1000 times over. Specific features: - Torsion-free C-stand construction made of steel - Resistant PUR paint - Discus disc system with to ...

Number of spindles: 7 St. Working width: min. 18 - 230 max. mm Working height: min. 8 - 150 max. mm Length of the planing table: 2000 mm Feed motor: 7,5 kW Feed speed: 7-36 m/min. Kuper planer and moulder SWT 23 XLS-7 ------------------------------------------------------ Machine still in use and can be viewed Furnishing: 7 spindles each with 7.5 kW motor 40mm diameter Working width: max. 230 mm, min. 18 mm Working height: max. 150 mm, min. 8 mm Feed table: 2,000 mm Spindle arrangement: 1. Spindle down, 6,200 rpm 2. Spindle right, 6,200 rpm, axial NC controlled 3. Spindle on the left, 8,000 rpm, axially and radially NC controlled 4. Spindle right, 8,000 rpm 5. Top spindle, 6,200 rpm, axially and radially NC controlled 6. Top spindle, 8,000 rpm, axially and radially NC controlled 7. Spindle down, 8,000 rpm Siemens PLC control large touch display Feed motor 7.5 KW speed 7-36 m/min Height a ...