12 offers edelhoff

Category: 106 presses
Latest update: 08.12.2022 add to watchlist
ankerimg
item-No.: 160386697
used
Seller: country-de Innovac GmbH
Location: Deutschland

Connected load: 17kW.

Category: 109 other metal working machines
Latest update: 08.12.2022 add to watchlist
ankerimg
item-No.: 160386089
New in: 1997
used
Seller: country-ch ProdEq Trading GmbH

CONTROLS   electronic controls PRESS DESIGN   drive system: eccentric / crank   frame design: C-frame, single sided PRESS FORCES   total force (nominal): 160 to PRESS TABLE   table surface (left-right): 1200 mm   table surface (front-back): 790 mm   opening in bed (left-right): 550 mm   opening in bed (front-back): 150 mm SLIDE   slide force: 160 to   table surface (left-right): 880 mm   table surface (front-back): 500 mm   stroke: 52 mm   stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS)   slide adjustment: 100 mm TOOL ASSEMBLY DIMENSIONS   shut height table-downholder (stroke down, adjustment up): 184 mm   distance table - slide max.: 284 mm DECOILER   sheet width max: 300 mm   max. weight of coil: 3 to &n ...

Category: 107 sheet metal working
Latest update: 08.12.2022 add to watchlist
ankerimg
item-No.: 160386815
New in: 1989
used
Seller: country-de Innovac GmbH
Location: Deutschland

Distance between the columns: 1280mm, installation height: 690mm, ram stroke: 20-160mm, nominal force: 160kN, table dimensions: 850x1250mm, including Electro Hydraulic Roller Feeder ALBA GGVHY 400 and machine cards, the ram adjustment is defective, available in spring 2023.

Category: 106 presses / Eccentric Presses
Latest update: 25.04.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158794575
used
Seller: country-de WAHO Werkzeug- und Maschinenhandelsges. mbH

Eccentric press make EDELHOFF type AZR / H638997 built in 1988Max. Press force: 63 tStroke adjustment: 10 - 90 mmRam adjustment: 55 mmRam strokes: 70 hpM.Table size: 800 x 800 mmDrive power: 4.0 kWWith- large table- 2 damping cylinders- Two-hand release- hydraulic clutch- Additional brakeused, in first-class conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 106 presses / Eccentric Presses
Latest update: 25.04.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158794583
used
Seller: country-de WAHO Werkzeug- und Maschinenhandelsges. mbH

Eccentric press make EDELHOFF type DEPSR 63Year of construction 1980Technical specifications:Printing capacity: 63 tSlide adjustment: 100 mmStroke adjustment: 60 mmStrokes: 150 HpM.Drive power: 5.5 kWWeight approx: 5500 kgWith- BVK 422 feed unit Feed max. 200 mm Band width max. 200 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 106 presses
Latest update: 08.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 154476069
New in: 1952
used
Seller: country-de
Price: 3.950 €

Eccentric press, single column press, automatic punching machine -Safety cage fully closed -pneumatic viewing window with finger protection -Pressure force: 35 to -Projection: 190 mm -Adjustable plunger: 50 mm -Stroke adjustable: 15-70 mm -Table size: 540 x 310 mm -Projection: 180 mm

Category: 106 presses / Hydraulic Presses
Latest update: 25.04.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158794593
used
Seller: country-de WAHO Werkzeug- und Maschinenhandelsges. mbH

Hydr. Double Column Press Fabr. EDELHOFF Type HZP 45Fabr. -No: 8420 built in 1978Max. Punching force: 45 tMax. Ram stroke: 200 mmTable size: 580 x 550 mmInstallation height: 400 mmDistance between the uprights: 600 mmClamping pin hole diameter: 40 H 7Dimensions L x W x H approx. 1200 x 1000 x 2700 mmWeight approx. 3000 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 106 presses
Latest update: 08.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157076733
New in: 1980
used
Seller: country-de Ambold Pressen GmbH
Location: Schmölln

pressure: 100 t distance between columns: - mm stroke: 350 mm table size: 1150 x 700 mm total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Single Column Presses
Latest update: 08.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160004349
New in: 1984
used
Seller: country-de Heinz Sanders GmbH
Location: D - 49779 Niederlangen

pressure: 100 t throat: 320 mm stroke: 250 mm clamping surface (upper): 430 x 800 mm base plate surface area: 600 x 855 mm table fall through hole: 200 X 200 mm total power requirement: 11 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 2 x 1,3 x 3,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 08.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159014339
New in: 1987
used
Seller: country-de Maschinen Schwartpaul GmbH
Location: Lager Plettenberg-Siesel

pressure: 35 t throat: 200 mm stroke: 5-75 mm no. of strokes: 130 Hub/min ram - range of adjustment: 50 mm table surface area: 500x380 mm ram surface: 260x200 mm hole in the table: 130x110 mm table height: 750 mm tool hole in ram: Ø 35 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x1500x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 08.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 155986147
New in: 1973
used
Seller: country-de Maschinen Schwartpaul GmbH
Location: Lager Plettenberg-Siesel

pressure: 35 t throat: 200 mm stroke: 5-95 mm no. of strokes: 160 Hub/min ram - range of adjustment: 50 mm table surface area: 500x370 mm ram surface: 260x190 mm hole in the table: 130x100 mm table height: 800 mm tool hole in ram: Ø 35 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Latest update: 08.12.2022 add to watchlist
ankerimg
item-No.: 160385549
New in: 1988
used
Seller: Vögtle Service GmbH
Location: Lager Eislingen, Baden-Württemberg

Pressure:063 t throat:250 mm stroke:10 - 100 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:380 mm table surface area:700 x 500 mm hole in the table:180 x 140 mm table height over floor:700 mm ram surface:360 x 275 mm ram adjustment:60 mm power requirement:5,5 kW weight:3,8 t Dimensions (WxDxH):1,9 x 1,7 x 2,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online