We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Key data: 80
Extruder 1 spindle Brand: Bandera, 80 Ø diám 25L/D, with two speeds, alternating current motor: 55 kw (75 hp) with variable speed drive. Two replacement spindles, one for rigid PVC and one for plasticized PVC. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
used
Key data: 60
Extruder 1 screw: 60 mm Ø, 25 L/D, brand: Flag, motor: 11 KW (15 hp). 6-speed gearbox with electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
used
Key data: 45
Extrusion line for 3D monofilament composed of: - Extruder 1 spindle, brand: Bandera, 45 mm diam 25 L/D, motor: 10 hp. With drying hopper: 100 L, master dispenser. With electrical panel and variable speed drive. - Head for 3D monofilament. - 3 stainless steel bathtubs: 2 m. - Stretch: 4 rollers. With variator. - 2-point monofilament thickness gauge. - Winder: 480x500 mm diam. For large coils. - Large reel unwinder and double rewinder for small reels. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
used
Key data: 65
Extruder 1 Screw 65 Ø diam, 30 L/D Brand: Flag engine: 30 KW (40 hp). With electrical panel. Reference: GT-4706
used
Key data: 60
Extruder 1 screw: 60 mm Ø, 20 L/D, brand: Flag, geared motor: 7.5 hp. No electrical panel.
used
Key data: 120
Extruder 1 spindle (pelletizer). Brand: Flag, 120 mm Ø, 25 L/D, engine: 100 hp. Variable speed drive, hydraulic filter changer: 120 mm, air head cutting, venturi screen and big-bag.
used
Key data: 120
Extruder 1 spindle (pelletizer). Brand: Flag, 120 mm Ø, 40 L/D, engine: 100 hp. Variable speed drive, degasser, hydraulic filter changer: 120 mm, air head cutting, venturi screen and big-bag bagging.
used
Key data: 120
Extruder 1 spindle (pelletizer). Brand: Flag, 120 mm Ø, 25 L/D, engine: 75 hp. Variable speed drive, hydraulic filter changer: 120 mm, air head cutting with pellet cooler, screen, venturi and big-bag bagging.
used
Key data: 60
Extrusion line for the manufacture of 30 and 40 mm tutors composed of: - 1 spindle extruder: 60 mm Ø Plasticization 25 L/D. Brand: Flag, motor: 32 Kw (45 hp) direct current, year: 1998. With variable speed drive, gearbox and electrical panel. - Cooling bath: 3 m, with caliper, water pump: 3 hp, vacuum pump: 4 Kw (5.5 hp). - Track drag trolley: 1300x130 mm, brand: Weber, model: RA302, motor: 5.5 Kw. - Cutting saw brand: Pericolo, diameter: 300 mm, motor: 2.2 Kw (3 hp).
used
Key data: 60
Extrusion line for the manufacture of forest protector 90 mm composed of: - Extruder 1 spindle brand: Flag, 60 mm Ø 25 L/D, motor: 37 Kw (50 hp). With variable speed drive, electrical panel and stainless hopper with master dispenser. - Stainless steel cooling tub: 2 m with 2 vacuum pumps: 4 Kw (5.5 hp) each. - Towing trolley: 1300x130 mm, brand: Cincinati Milacron, engine: 5.5 Kw. - Die-cutting machine and shear with hydraulic group: 4 Kw (5.5 hp), tank: 75 liters.
used
Key data: 60
Extrusion line for the manufacture of 100 mm forest protector composed of: - Extruder 1 spindle, brand: Flag, 60 mm 25 L / D, motor: 30 hp. With variable speed drive and electrical panel. With charger on single-phase hopper. - Stainless steel cooling bath: 4 m. With 2 vacuum pumps: 4 Kw (5.5 hp) each. - Drag trolley: 2100x190 mm - Die cutter and shear with hydraulic group: 4 Kw (5.5 hp). Tank: 75 litres.
used
Refer to code 1046 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1042 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Key data: 60
Extruder 1 spindle: 60 mm Ø, 25 L/D, brand: Flag. No motor, no electrical panel, with 6-speed gearbox.
used
Strainer Bandera 150mm with 75kW motor. This machine has been overhauled by Deguma and little used after that. More info as attachment.
used
Mono-plate system Material:PE, PP, PS, ABS. Built: 1985, last modification: 2003 Screw diameter: 100 mm, L/D 36 Extruder with degassing, vacuum pump, melt pump, hydr. Screen changer, nozzle 1350 x 1.0 - 6.0 mm, 3 rolls smoothing unit 1350 x x 350 mm with single drives, 3 temperature control units for roller temperature control, cooling section, side cut, printwith 2 rubber rollers, top and bottom protective foil lamination, cross saw 1,350 mm, switch cabinets with air conditioning, separate control panel
used
CALIBRATION TUNNEL COOLING TUNNEL LOADING TUNNELS EQUIPPED FOR DIAM TUBES. 20 TO 160 MM HOURLY PRODUCTION: 280-300 KG/HOUR
used
Description Cutter for pipes
used
used
used
used
Complete retrofitted line consisting of: Processable material: plasticized PVC and polyphenyl composition passive pay off Bandera 3025 extruder overhauled with Toshiba inverter 2 extrusion screws (1 for PVC 1 for polyphenyl) cable and profile extrusion head 4 meter stainless steel tank double flywheel drive (interface on line with inverter) double reel winder for 400 reels
used
Twin-screw extruder complete with gravimetric dispensers, water refrigeration system and bigbag weighing and filling system Sale of production line consisting of: ⢠A BANDERA model 55LD42 twin-screw extruder; ⢠A dispenser called âKYARAâ positioned upstream of the extruder, in the part closest to the motor. The Kyara consists of four granule hoppers that mix up to four different materials. The mix obtained is then managed by a single main dispenser (DOS 1) positioned naturally also upstream of the twin-screw line. The charge of the four KYARA hoppers is completely automatic and managed by a blower positioned on the ground. The latter is connected with four lances which must each be inserted into a different bag of material that has been chosen mix. The mixture proportions are set by an operator directly on the panel control dedicated to the dispenser; â ...
used
Bandera Extruder Tr 60 - Diam 28 Ld Year 1991 Material Pp - Pe 12 Zone Control Panel Cear Mlf 180 K engine DC Drive Motor Vecc130 Hp 40 -- 75 - 2500 Rpm
used
Bandera 60 extrusion line 25 kW, 400 V Year 1961 Diameter 60 L / D ratio 20 Variable V gearbox With electrical panel Gauge holder bench with vacuum pump and variable speed track drive, Pagani brand
used
Complete retrofitted line consisting of: Processable material: plasticized PVC composition active pay off passive pay off Bandera 4020 extruder retrofitted with Toshiba ivnerter cable and profile extrusion head 4 meter stainless steel tank double flywheel drive (interface on line with inverter) double reel winder for 600 reels
used
Extrusion line consisting of: - Bandera 45 extruder - year 1960 - 15 kW, 400 V - diameter 45 - ratio L / D 20 - mechanical gearbox - Gauge holder bench - towing - disc cutting and overturning - Pagani brand
used
Entire coextrusion line consisting of: - Bandera extruder 80 - 20 L / D - 60 kW, 400 V - year 1969 - variable V gearbox - Bandera extruder 80 - 20 L / D - 60 kW, 400 V - year 1965 - mechanical gearbox - 700 mm coextrusion table - Towing cutter, oven, Tecnofar exit tunnel with hydraulic variators - Omipa calender width 1000 mm with hydraulic variators - year 1976
used
Extrusion line consisting of two extruders: - Bandera 60 extruder - year 1960 - 30 kW, 400 V - diameter 60 - ratio L / D 20 - variable V gearbox - Union extruder 60 - 30 kW, 400 V - diameter 60 - ratio L / D 20 - mechanical gearbox - 400 mm coextrusion table - Towing, cutter, oven, Pagani exit tunnel - Tecnofar calender width 450 mm
used
Maximum Diameter: 25 mm // Minimum Diameter: 12 mm