MEP used machine for sale

Key data: 350 mm

From insolvency: Light Alloy Circular Saw Mep Cobra 352 MA Year of construction 2018 Saw blade diameter 350mm 2 pneumatic material clamps I2qszckei Coolant system Roller conveyor left 1800mm Stop right 600mm 2 sawing speeds 1700 / 3400 rpm Mitre cuts li + re 40/45° Shifter cuts up to 45° 380 volts 2.2KW + 1 pc newly ground saw blade Replacement stop jaws Capacity Cutting range ROUND 0°: 120 mm Cutting range AROUND 45° left: 120 mm Cutting range AROUND 45° right: 110 mm Cutting area SQUARE 0°: 105 mm Cutting area SQUARE 45° left: 100 mm Cutting area SQUARE 45° right: 95 mm Cutting area FLAT 0°: 180 x 70 mm Cutting area FLAT 45° left: 135 x 60 mm Cutting area FLAT 45° right: 135 x 60 mm Cutting range inclined ROUND 45°: 50 mm Cutting range SQUARE 45° inclined: 50 mm Cutting area FLAT 45° inclined: 160 x 35 mm / 180 x 20 mm

Weight: 1240 kg Equipment: - 1 roller conveyor (3 m) - Roll width: 34 cm (with 1 length measuring device) - 1 roller conveyor (5 m) - Roll width: 62 cm

Article number: 19-03-027 Manufacturer: Mep Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1991 L x W x H: ca.700x900x1100mm Weight: approx. 150kg Saw blade dimensions: approx. 400x3,6x40mm Saw blade speed: approx. 2800 rpm Accessories  Pneumatic clamping  Saw blade  Miter-adjustable back stop Other accessories on request Price and other technical data on request

Specifications: - Saw blade dimensions 275 x 2 x 40 mm - 2 saw blade spindle speeds 44 + 88 rpm - Cutting range at 90° around 90 mm - flat 110 x 60 mm - Mitre adjustable up to 45 ° - Material vice - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Space requirement approx. W 600 x H 1400 x D 900 mm - Weight approx. 200 kg

Key data: 200 mm

Sawing Capacity: 160 mm round 160 mm square 160 x 200 mm Rectangular Sawing capacity 45 degrees: 130 mm Round 120 mm square 60 x 140 mm Rectangular Sawing capacity 60 degrees: 80 mm Round 60 mm square 60 x 80 mm Rectangular Sawing speed: 33/66 mtr./min. Saw band: 2375 x 20 x 0.9 mm 2375 x 19 x 0.8 mm Equipped with: - Coolant system - Emergency stop - Material stop 840 mm Country of origin: Italy Motor power: 1.9 Kw Machine weight: 310 kg Machine LxWxH: 1100 x 800 x 1500 mm

Inv. Num. : 7326 Type: FORMAT 16 3D HS Producer: MEP Created: 2012 Parameters: Bending steel: 6-16 mm Equipment: Unwinder

Key data: 350 mm, 115 mm

Speeds 15, 30, 45, 90 rpm Swivel -45 to +60 ° Cutting capacity - rectangle 180 x 95 mm Cutting capacity - Round 115 mm Cutting performance - square 95 mm Cutting range at 45 degrees: approx. 110 mm Total power requirement 3.1 kW Machine weight approx. 375 Kg Space requirement approx. 0.9 x 1.1 x 1.9 m

one used MEP Format S stirup bending machine • Single strand processing wire diameter cold drawn, hot rolled, smooth or ribbed wire from Ø 6 to Ø 12 mm from #2 to #4 fy = 600 N/mm² • Double strand processing wire diameter cold drawn, hot rolled, smooth or ribbed wire from Ø 6 to Ø 10 mm from #2 to #3 fy = 600 N/mm² – ft = 700 N/mm²

Bend Saw Automatic MEP SHARK SX DUTY used machine in good working condition . Price on request

Machine Details Stock-No. 1105-03834 Type of machine Cold Circular Saw Make MEP Type TIGER 350 Year of manufacture 1996 Type of control conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base free truck Technical details saw blade diameter 350 mm Cutting diameter 250 mm stroke 170 mm Capacity 90 degrees: flat 235 X 70 mm capacity 45 degrees: flat 85 X 70 mm Cutting Speed 26/ 52 m/min total power requirement 3 kW weight of the machine approx. 700 KG Additional information VERY NICE

Semi-automatic metal band saw Cutting performance: 0° Round 300 mm, square 260 mm, width x height 330 x 260 mm // 45° left: round 260 mm, square 250 mm , width x height 270 x 200 mm, // 60° left: round 180 mm, square 170 mm , width x height 170 x 170 mm // 45° right: round 200 mm , square 180 mm , width x height 200 x 160 mm ,

Circular saw Manufacturer: MEP Type: Tiger 350

Sawing capacity: 280 mm round / 330 mm square Sawing capacity 45º: 250 mm round / 250 mm square Sawing speed: 40/80 mtr.min. Band saw blade: 3,320 x 27 x 0.9 mm Saw angle: 0 - 60º Equipped with: - Cooling system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm

Fully automatic circular saw with miter cut - up to 300 sawing programs - single stroke 1,000 mm, repeatable as desired - Saw blade: HSS 370 x 32 x 3 mm - Blade speed: 5 - 150 1/min - Vice opening 190 mm

MEP Multimatic SA8, year of construction 1995 Straightening and cutting system for reinforcing steel, fully automatic, complete functional system, immediately available Plant still in operation and can be demonstrated.

COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. BEST PRICES IN EUROPE FOR MEP MACHINES! ASK FOR A QUOTE

SHARK 512 SXI evo, semi-automatic electro-hydraulic sawing machine with 4640x34x1,1 mm band, to cut pipes, profiles and beams up to 510×320 mm at 0°. Extremely versatile machine, for cuts between 60° left and 60° right. CUTTING CYCLE: after having positioned the bar, starting the cycle the following operations are performed: vice closing – motor start – head descent for cutting – motor stop – head return – vice opening. CYLCE DOWN UP: Operating in semiautomatic cycle , the new function DOWN makes the head and blade motor stop once the cut is finished with the vice closed, by pressing the UP button the head raises back to its starting point and the vice opens. ASK FOR EVERY MODEL OF MEP MACHINES, WE HAVE THE BEST PRICES IN EUROPE

SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE

Technical data: -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm or square 80 mm -Pneumatic chucks -Material supplies automatic position control -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

Cutting range: 90° round: 210mm, 90° square: 200x200mm, 90° flat: 270x200mm,45° round: 180mm, 45° square: 180x180mm, 45° flat: 180x190mm.

Capacity round maximum diameter: 330 mm Angle degrees maximum: 330 Capacity square: 3320 mm Workpiece height: 1 mm Workpiece width: 1 mm Capacity rectangle: 1 mm Band sawMepp - SHARK 330 NC evo MACH-ID 8508 Make: Mepp Type: SHARK 330 NC evo Year: 2007 Capacity 90°:      300° Cutting 90°:       330 x 250 Cutting speed Vario:15 - 100 Circle blade size: 3320 x 27 x 0,9mm Power:             2,2kW Length:            2200mm Width:             1950mm Height:            2050mm Weight:            1200kg

Description: cutting diameter: 250 mm cutting belt length: 2835 mm belt speed: 36 - 72 m/min 45 degree capacity: flat 210 mm 45 degree capacity: round 220 mm 45 degree capacity: 210 mm square cutting width: 310 mm table height: 850 mm total power requirement: 2.2 kW manual material clamp foot control cutting diameter: 250 mm, band dimensions: 2,835 mm, cutting range at 45°: flat mat.: 210 mm, cutting range 45 degrees: round: 220 mm, cutting range 45 degrees: square: 210 mm, weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 1,000 x 1,750 mm

Description: Blade: 350mm Bore diameter 32mm Blade thickness: 2.5mm Manual stop 3000mm Cutting speed: 15/30/45/90 rpm cutting capacity (for Ø 350 mm) Section  , , , , , , , ,Round tube  , , ,Square tube  ,Rectangular tube 0°  , , , , , , , , , , ,&nbs p, , , , , ,120  , , , , , , , , , , ,&nbs p, , , , , , ,100  , , , , , , , , , , ,&nbs p, , , ,180x100 45° right  , , , , ,110  , , , , , , , , , , ,&nbs p, , , , , , ,100  , , , , , , , , , , ,&nbs p, , , , ,125x100 45°left  , , , , ,&nb ...

Description: speed 36/72 m/min blade size 2950x25.4x0.9 mm start/end of shift 60/10 bar weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 900 x 1,500 x 1,700 mm

Description: Technical documentation and instruction manual not available. weight approx.: 165 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 600 x 1,400 mm

Description: Roller feed 1500 x 370 mm, , Roller outfeed 1500 x 370 mm, with stop 1680 mm Includes metal replacement saw blades band dimensions: 2950x27x0,9 mm, cutting range 90 degrees: flat: 280x200 mm, cutting range 90 degrees: round: 250 mm, cutting range at 45°: flat mat.: 180x180 mm, cutting range 45 degrees: round: 190 mm, cutting range 45 degrees: square: 180 mm, weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 1,600 mm

Capacity: 280 x 220 mm Double sided miter Mist lubrication

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 485 kg dimensions of the machine ca.: 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.