We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Inv. Num. : 6099 Type: 203 Y Producer: Hitachi Created: 2002 Parameters: Hours: 39801 h Max. travel length of the X-axis: 330 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 160 mm Machine weight: 300 kg
used
Inv. Num. : 5124 Type: 254Z Producer: Hitachi Created: 2003 Parameters: Control system: FANUC Table length: 400 mm Table width: 250 mm Maximum workpiece length X: 400 mm Maximum workpiece width Y: 250 mm Maximum workpiece height Y: 210 mm Equipment: Manual control List
used
Key data: 320 mm, 250 mm, 160 mm
Inv. Num. : 7379 Type: H-CUT 203M20 Producer: HITACHI Created: 1995 Parameters: Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 160 mm
new
HITACHI RCUE50CLG Brand:HITACHI Type:RCUE50CLG Stock number:M23-4664 Cooling capacity:145 kW Refrigerant:R407C Refrigerant Content:1 kg Voltage:400 Volts Power consumption:42,4 kW Dimensions:1088 x 935 x 1343 mm Weight:680 kg Year:2009 New/unused Number in stock:1 piece(s) Price:On request I Description: New unused Hitachi split chiller with 1 screw compressor. Mentioned capacity at a water temperature of +12/7°C and a condensation temperature of +45°C. This split chiller is without a condenser. We can offer a suitable condenser on request. Visit our website: used-refrigeration
used
ID2745 Hitachi KH230 year/Year of construction 1994 was overhauled in 2012, engine Deutz BF12L513 (284KW) – changed 3000 hours ago, hydraulic pump for drill, hammer and vibrator drive is a 4-stage constant pump with a capacity of 480 liters at 300bar, basic boom 36 + 2 m extension + 6 m Bär extension, with a choice of 7 t or 9 t BSP hydraulic hammer was overhauled in 2012, engine Deutz BF12L513 (284KW) – changed 3000 hours ago, hydraulic pump for drill, hammer and vibrator drive is a 4-stage constant pump with a capacity of 480 lieters at 300bar, basic boom 36 + 2 m extension + 6 m bear extension, with either 7 t or 9 t BSP hydraulic breaker
used
Hitachi CT Type: Eclos 16 slice with only 119 000 scan / Disassembled / Location : Koblenz
used
Key data: 410 mm, 260 mm, 210 mm
Inv. Num. : 6039 Type: 254Y Producer: Hitachi Created: 2004 Parameters: Control System: MARK-10W Feed length X-axis: 410 mm Feed length axis Y: 260 mm Feed length axis Z: 210 mm Axle U: 200 mm Axis V: 200 mm Wire diameter: 0.25 mm Max. workpiece dimensions: 680 x 520 x 210 mm Max. workpiece weight: 410 kg
used
Key data: 250 mm, 400 mm, 210 mm
Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg
used
Cooling capacity: 412 kW(12/7 — 35°C) Year of manufacture: 2009 Options: with economizer Heat exchanger: Plate Refrigerant circuit: 1 pc. Compressors: 2 pcs. Hitachi (screw) Number of fans: 12 pcs. Type of refrigerant: R407C Dimensions: 5.37 x 1.90 x 2.42 m. Weight: 3550 kg. Condition: Very good Product quantity: 1 pc.
used
Used Hitachi 50ASC-Z screw compressor on Freon with a sight glass and capacity control. The compressor has a displacement of 169,5 m³/h. Running hours compressor 1: 4407 Running hours compressor 2: 4385 Brand Hitachi Type 50ASC-Z Refrigerant Freon kW at +10ºC/+40ºC 171,0 kW at 0ºC/+40ºC 142,0 kW at -5ºC/+40ºC 116,0 kW at -10ºC/+40ºC 94,0 Capacity Control Sight Glass m3 / h 169,5 Remarks | Y.o.b. 2009 Remarks || Capacity based at +5ºC/+40ºC Weight in kg. 440 Amount in stock 2
used
Qty. 1 Second-hand copper rolling mill Material: Copper & Copper Alloy (Pbc, Etc.), Aluminium, Etc. Manufacture: Hitachi(Japan) Type: 4-Hi Reversing Rolling Mill Strip Width: Max 450 mm Thickness: 0.3 mm ~ 4.0 mm (Copper) Line Speed: 100 m/min. Coil Weight: 5,000 kg Manufacturing Date: 1963 1st Revamping Date: 2008 2nd Revamping Date: 2010 3rd Revamping Date: 2020. 05 Revamping: Mill Housing Clean & Painting Improvement of Screw Down System (Ram Cylunder --- Geared Motor) Change of Deflector Roll & Press Plate Right/Left Reel: Increase Capacity Right Reel: 30 kW, 200/500 RPM – 110 kW, 650/1,800 RPM, Left Reel: 30 kW, 200/500 RPM – 75 kW, 400/1,500 RPM Change of Drive for 2-Coil Car: Hydrauric Cylinder – Geared Motor
used
Travel routes: X: 350 mm Y: 500 mm Z: 300 mm Travel (U x H): 200x200 mm FFII Generator Awf Dielectric cooling Water tub X2 Generators
Mfc.: Hitachi Type: 6-Hi reversing mill Built: 1976 Shut down: 2014 Revamped: 2010 Control system – changed DC to AC motors Load cells were replaced in March 2005 & thickness gauge in March 2009 Roll coolant cooler was replaced in July 2009 Control boards of hydraulic screw down & electromagnetic valves were replaced in 2009. Strip width: 610 – 1330 mm Thickness Entry: 1.6-4.5 mm Exit: 0.15 – 2.3 mm
used
HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM
used
Hitachi chain moulder 110 V This article is in good working condition. The chain size is 30 mm and is out of focus. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for fences, sheds, huts, restoration and much more.
used
Description: 16 ton HITACHI ZX160 Excavator (3293) Engine: IZUZU Power: 74kw at 1.950/min Maximum Power: 81kw at 2.150/min 22.175 hours PIN: HCMBCC00C00010780 Approx. Onsite Dimension. (l x w x h): 8,640 x 2,490 x 2,880 mm, Motor manufacturer: IZUZU, weight approx.: 16,000 kg
used
Description: 16 ton HITACHI ZX160 Excavator (3292) Engine: IZUZU Power: 74kw at 1.950/min Maximum Power: 81kw at 2.150/min 20.379 ,hours PIN: HCMBCC00T00010613 Approx. Onsite Dimension. (l x w x h): 8,640 x 2,490 x 2,880 mm, Motor manufacturer: IZUZU, weight approx.: 16,000 kg
used
Description: HITACHI ZX280LCN Excavator (3313) Engine: IZUZU Power: 136kw at 1.800/min Maximum Power: 140kw at 1.900/min 17.700 hours PIN: HCMBFK00C00030111  , Approx. Onsite Dimension. (l x w x h): 10,290 x 3,000 x 3,170 mm, Motor manufacturer: IZUZU, weight approx.: 27,800 kg
used
Description: 13 ton HITACHI ZX130 Excavator (3281) Engine: IZUZU Power: 63kw at 1.950/min Maximum Power: 66kw at 2.150/min 20.900 hours PIN: HCMBCB00E00200905 Approx. Onsite Dimension. (l x w x h): 7,610 x 2,490 x 2,890 mm, Motor manufacturer: IZUZU, weight approx.: 12,600 kg
used
Description: 13 ton HITACHI ZX130 Excavator (3294) Engine: IZUZU Power: 63kw at 1.950/min Maximum Power: 66kw at 2.150/min 19.793 hours PIN: HCMBCB00J00200930 Approx. Onsite Dimension. (l x w x h): 7,610 x 2,490 x 2,890 mm, Motor manufacturer: IZUZU, weight approx.: 12,600 kg
used
Description: 13 ton HITACHI ZX130 Excavator (3296) Engine: IZUZU Power: 63kw at 1.950/min Maximum Power: 66kw at 2.150/min 20.237 hours PIN: HCMBCB00V00201143 Approx. Onsite Dimension. (l x w x h): 7,610 x 2,490 x 2,890 mm, Motor manufacturer: IZUZU, weight approx.: 12,600 kg
used
Description: HITACHI ZX280LCN Excavator (3314) Engine: IZUZU Power: 136kw at 1.800/min Maximum Power: 140kw at 1.900/min 18.500 hours PIN: HCMBFK00V00030112 Approx. Onsite Dimension. (l x w x h): 10,290 x 3,000 x 3,170 mm, Motor manufacturer: IZUZU, weight approx.: 27,800 kg
used
Buyer is responsible for the disassembly
used
Description: Composed of: HITACHI RAC-25SXB thermo convector HITACHI air conditioner Remote control Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 50 kg
used
Hitachi RX Label Printer Hitachi RX printer adapted for batch and expiration cup machine.
used
Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Manufacturer: Hitachi, rotary hammer type DH 25V with carrying case -Rated consumption: 600 W -Drilling/impact drilling -Speed: 0 - 800 rpm -Drilling capacity: steel 13 mm / concrete 25 mm -Dimensions case: 445/340/H170 mm -Weight: 10.3 kg
used
Hitachi starter -Voltage: 12V -Type: S114-443 -Teeth: 8 -Weight: 5 kg
used
Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Nominal consumption: 620 W. -Mains connection: 230 V -Drill -div. drill -Suitcase -Weight: 5.5 kg
used
blower power: 19 kW motor: . bucket: Diesel . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.