us motors used for sale

Clamping force kN 2400 Mould thickness mm 460-800 Opening stroke mm 0-510 Distance between tie-bars V/H mm/mm 630/630 Stroke, injection unit mm 550 Nozzle contact force KN 78 Screw diameter mm 60 Injection pressure bar 1534 Max. injection volume cm3 565 ø centring ring mm 160 ø mould release bar (=standard) mm M16-M20 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M20 Robot Yes

Clamping force kN 2000 Mould thickness mm 200-500 Minimum mould diameter mm 315 Opening stroke mm 200-480 Distance between tie-bars V/H mm/mm 510/430 Stroke, injection unit mm 470 Nozzle contact force KN 75 Screw diameter mm 55 Injection pressure bar 1751 Max. injection volume cm3 465 ø centring ring mm 125 ø mould release bar (=standard) mm M16-M20 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M16 Robot Yes

Centering ring diameter on the plate is 160 mm (not the standard 125 mm) This machine was regularly maintained and has CE norms. Type of used material: PBT GF 30 ABS/PA PP Service history: 3.2015 – Replacing the CF card reader with a floppy disk drive 5.2013 – Machine calibration 5.2009 – Machine calibration

MIR SPA brand RMP 830 model Year 1998 Current status In operation Overall dimensions 11830 x 2225 x 2820 mm Weight 42000 Kg Tonnage 830 Column passage 930 x 930 mm Screw diameter 90 mm Calculated injection volume 2735 cm3 Min/Max mold thickness 350-1000 mm Robot interface Euromap 12 YES Jack YES Moving floor stroke 1030 mm

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Calibration - Ergocheck 1.2016 — Replacement of a faulty hydraulic system pressure sensor. scheme 1.2015 – repair of the nozzle rod. units 2.2014 — Replacement of the chamber, auger and tip 1.2013 — Replacement of the screw and tip 6.2012 – Repair, re-sealing of the injection cylinder. units 11.2010 — Repair of proportional valve 4.2008 — Replacing the control panel display 3.2008 — Replacing the proportional valve 3.2008 — Calibration — Ergocheck 12.2007 — Replacing the tip

For Sale: Complete Extruder Line Manufacturer: Union Type/Model: Ø 120 LD 42 Year: 1998 Motor: 147 kW DC variable speed Condition: in good working condition Water ring palletizer Screw diameter: 120 mm, Screen changer: OMP PREALPINA Year 2013 like new Screen changer type: hydraulic, Ø 300 mm Degassing System: atmospheric degassing Capacity of 300÷500 kg/h, depending on the type of material and MFI Pelletizing line suitable for the recycling of grinded rigid plastic materials PE, PP, PS, ABS Spare parts: 3 screws second-hand Control panel

Complete extrusion line with support for sale, dispense, extrude, granulate and SAG Extruder: Feddem FED 72 MTS, 2000., 2012 general overhaul. 600-1000 kg / h with PBT, PA6, PA66, GF and impact resistant modified products. Thyssen TGE 3-72-DOS-4 transmission, 314 kW Compexmotor, 4 degassing zone with 3 vacuum degassing, 3 body parts open side feeder, Dosage: Dosage: 6 Brabender dosing scales with control, multiple pellets/Flake car, 2 powder scales, a fiberglass scales, Transitube support for glass fibers Side feeder: Feddem/Flender Vacuum pump: A439697 Integrated Granulation: IPS SG120/7.5, 2000, 9 kW Complete solid steel frame for the feeders and water bath brushes, bagging Tower for granules with S + S all metal separator, Transitube glass fiber/material high to promote

Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 A439697 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.

Complete retrofitted line consisting of: Processable material: plasticized PVC and polyphenyl composition passive pay off Bandera 3025 extruder overhauled with Toshiba inverter 2 extrusion screws (1 for PVC 1 for polyphenyl) cable and profile extrusion head 4 meter stainless steel tank double flywheel drive (interface on line with inverter) double reel winder for 400 reels

Kautex KB 15/10-S60/25 Blowmoulding machine From 1992 Type: continuous extrusion Clamping force : 200 kN Closing stroke for moulds: 2250 mm Max volume for the part: 30 L Cylinder diameter: 90 mm Die diameter: 140;170;190 mm Max package for tools: 700600(2300) mm Parison control: Yes Installed power: 125 kVA

Oil bottling line complete with labeller and case packer. Volumetric machine Sabry series 12 valves capper for plastic pressure cap. Complete with safety protections. Machine suitable for filling oil and other liquids in pet, glass bottles and tin cans packaging for bottles from 250 ml to 5 liters. Vibrating tank for capsules for aluminum caps. Cap descent channel with gripping head + photocell for aluminum caps. Machine equipped with a set of accessories for packaging from 1 to 5 - 0.75 - 0.50 liters. Bottle support table, conveyor belt. Mono pump 900-4500 lt / h 2cv. Machine composed of labeller and case packer.

The machines we are presenting to you are the models Geset 221-CC (labelling system) and Linx 8920 (printing system) from Bluhm Systeme GmbH. The machines are approx. 2 years old, but have only been in operation for a few months.

Used VMI s.a.s. Saturno 2 Teste Labeller Labeller allows you to automate labeling on products of different formats. Preserved in perfect condition Below is more technical information on the machine: Maximum label length: 300 mm (standard) Minimum label length: 10 mm Spool Inner Diameter: 38mm Max coil external diameter: 300 mm Variable speed Label stop accuracy: 0.5 mm Motorisation: step/step Start with photocell or microswitch Weight: 120 kg Supply voltage: 220V 50/60Hz Year of construction: 2009 CE conformity

- System connected and ready for testing - 4-point aggregate - Can work with F,E,B,C,BE,EB flute - Can make 4 glued corners/ Servo jaws are installed. - Number of gluing points : 1,3,4 points - 3 point gluing is possible Plant is dismantled Price includes dismantling and loading. Generally good condition, not overhauled. Was in production until dismantling

2 Industrial GAS AUTOCLAVES for food sterilization (mushrooms and canned foods). In excellent condition. They are gas powered with an industrial sterilization system, little has been used for the sterilization of mushrooms. The dimensions are 130cm wide by 160cm high. The general conditions are very good. Equipped with vertically removable stainless steel basket Approximate capacity between 200 and 250 liters

Used CILAS Particle size analyzer 1064 Analytical instrument Original software - Software: Size Expert V8.04 (year 2005)and Windows XP computers Software: Size Expert V8.04 (year 2005) Possibility to also supply the CPU Expire of last Calibration Revision: 2017 The device is suitable for both dry and liquid. The seller supplies the user manual, calibration manual, original installation CD and computer together with the machine. For any problem or maintenance, the customer can contact CILAS France or the Italian company that carries out the calibrations on behalf of Cilas.

Analytik-Jena AAS flame + graphite furnace (with Zeeman effect) AS 52S flame autosampler capacity 49 samples Fornetto MPE 60 autosampler 89 samples 6-post hollow cathode lamp tower Hydride system HS60 WINAAS software version 3.17.0 for Windows XP environment Without PC and without water cooler.

Hyperbaric oxygen therapy (HBOT) is a vital treatment modality used in various medical conditions, including wound healing, decompression sickness, and more. These hyperbaric chambers offer a controlled environment for delivering high-concentration oxygen under increased atmospheric pressure. The 2019 and 2021 models cater to the diverse needs of patients and healthcare professionals, providing top-quality treatment and comfort. Key Technical Specifications: Chamber Dimensions: Both chambers are 90cm in diameter, providing ample space for patients while ensuring efficient pressurization. Software Operation: The 2021 model boasts the latest software operation, offering enhanced control and precision in treatment. TV Systems: Equipped with TV systems, patients can comfortably pass the time during treatment sessions. Oxygen Concentrators: Included oxygen concentrators ensure a stea ...

Very high quality mass spectrometer Voyager DE PRO AB Sciex AB Sciex Serial No.6381 / Model Voyager DE PRO  the date of manufacture in October 2004. The mass spectrometer was in operation in the Scanbec laboratory until it was dismantled. Last service check was 02/2016 We therefore strongly recommend that a current service check is carried out before the mass spectrometer is put into operation! The mass spectrometer has already been properly disconnected for sale and made ready for transport. This means that the mass spectrometer can be handed over to the buyer promptly, i.e. within approx. 24 hours, at our premises (DE 06774 Muldestausee). Unfortunately, a side panel is missing, but can be purchased.

Spectrometer for scientific use QEPRO-CUSTOM#HC-1 Characteristics:  Dimensions: about 182mm x 110mm x 47mm, weight about 1,18Kg;  Hamamatsu detector S7031-1006 2D 1044 x 64 pixels;  Integration time: from 8ms to 60min;  Maximum quantum efficiency: 90% , quantum efficiency at 250nm: 65% ;  Signal-to-noise ratio: 1000:1;  HC-1 composite diffraction grating, suitable for the range 200-1100 nm; Slit width: 25µm;  Interchangeable slits (not included), available in 5, 10, 50, 100 and 200μm;  Resolution (FWHM): about 2.0 nm with 25μm slit;  Thermoelectric cooling;  Direct interface with PC via USB;  Standard SMA 905 fiber optic connector. 2. Interchangeable slits cod. SLIT-XX Available in sizes 5, 10, 25, 50, 100, 200 μm. 3. Operating software cod. OCEANVIEW Characteristics:  Includes the necessary drivers for spectrometer control; ...

Ametek APOLLO X Analytical instrument System Components The system is comprised of: o A 10 mm2 or 30 mm2 detecting unit assembly. o A DPP3 PCB fitted inside the PC workstation (or EDAM analyzer) that amplifies, digitizes and processes the detector signal. o A support box to provide power and the ThermoElectric Cooler (TEC) controls to the detector. o A signal cable is used to connect the detector assembly to the DPP3 PCB. o A detector power / TEC1 control cable is used to connect the support box to the detector. o A TEC2 control cable is used to connect the support box to the detector. o A PC Workstation with Genesis software version 6.03 or greater Space requirements Apex2 configuration Workstation dimensions: 17.7 x 6.7 x 18.0 in (44.9 x 17.0 x 45.7 cm) Workstation weight: 33.0 lb. (14.97 kg) Detector Support box: 7 1/8 x 10 1/4 x 3 3/8 in (18.1 x 26.0 x 7.6 cm) D ...

Used washing machine for sale. It has been used for about 50 hours. Brand new condition. For washing production parts. Does not meet our expectations in terms of rinsing. Year 2020. Documentation and videos in the advertisement

Sigma floor-standing refrigerated centrifuge 8 KS, water-cooled, GMP version, inert gas device. The Sigma 8KS laboratory centrifuge has a low access height for easy loading and unloading, is pleasantly quiet in operation and has low power consumption. It can be used for all tasks in blood banks, medicine and research. The capacity is 12l for production. Technical data: Max. Speed [min-1]: 10,500 Max. Gravity field [x g]: 20,954 Max. Capacity [ml]: 12,000 ml Temperature range: -20°C to +40°C Memory locations: 60 Accessories: 1 pc. Swing-out rotor for 6 cups 6 pcs. Double beakers 2x1000 ml (clean room) 36 pcs. Stainless steel bottle 1000 ml with cap

Automatic non-contact liquid dispensing system Scienion sciFLEXARRAYER S3 for production of custom microarray for research and diagnostic applications. Components: automatic spotter, enclosing box, pump, computer with running software. Size: spotter 85x76x64 cm; pump 27x46x60 cm

Manufacturer Angelantoni ACS Model DY 110 Operating condition Used (as good as new) Year of construction2021 Value added tax Deductible DescriptionClimate test chamber ACS DY110 - Year of construction 2021 - Acquisition January 2022 - approx. 500 operating hours - Sale due to completion of product development / testing Technical data: - Test chamber dimensions: 548 x 447 x 447 mm - Test chamber volume: 110 litres - Working range temperature tests: -40 to +180°C - Working range of climate tests: +10 to +95 °C and 10 to 95 % relative humidity - Rated power 3 kW, connection to 1/N/PE AC 230V 50Hz via CEE Qualifications: - 2006/42/CE Machinery Directive - 2014/35/UE Low Voltage Directive - 2014/30/UE Electromagnetic Compatibility Directive - IEC 61439-1/2 Low-voltage switchgear and controlgear assemblies - IEC-60204-1 Safety of machinery - Electrical equipment  ...

Operating Instructions FMB Machining Center / Version 9. June 2011. Machining centres Software from Schüco installed Software design Special machines Operating instructions 7. technical data 7.1Machine dimensions Total length mm 9,750 Total depth / with LS mm2.750 / 3.300 Total height max. mm4.100 7.2 Axle travel X-axis mm approx. 7,100 Y-axis mm approx. 1,480 Z-axle bucket 710 V-axis (optional)mmca 6,980 A axis (optional)degrees180 ° Gajs30zga C axis (optional)degree360 ° W-axis (optional)mm 7.3Working spindle Spindle drive kW7.5 Spindle speedmin-120.000 Spindle mounting HSK E40 7.4Tools Mounting HSK E40 Wkzg positions 6 (more optional) 12 Wkzg maximum diameter mm 35 Saw blade Ø for milling spindle mm 400

TRAUB TND 400 CNC Lathe, used - machine no.: 192 - operating voltage: 380 V - frequency: 50 Hz - control voltage: 22 V - valve voltage: 24 V - coupling voltage: 24 V - total nominal current: 102 A - total connected load: 48 kW - read off operating hours: 48739 - control system: TRAUB SYSTEM TX 8F - spindle passage: 65 mm - clamping chuck diameter: 200/250 mm - turning diameter over cross slide: 240 mm - turning diameter over bed: 480/170 - turning length: 800 mm - tool holders in turret: 12 pieces for cylinder shaft 40 x 63 mm - slide travel cross: 220 mm - slide travel length: 850 mm - rapid traverse cross: 10000 mm/min - rapid traverse longitudinal: 20000 mm/min - speed at drive wheel: 4000 rpm - ttailstock quill diameter: 85 mm - quill stroke: 140 mm - holder MK5 - press force of quill at 20/60 bar: 3300 N/10000 N - the machine is equipped with one tailstock, ...

adjustment range X 400 mm, Y 250 mm, W (grinding head) 250 mm, feed X and Y 0 to 1800 mm/min, W 0 to 3000 mm/min, table 600 x 380 mm, maximum table load 200 kg, grinding spindle speeds with electric motor 9 to 45000 rpm, with air turbines up to 100000 and 160000 rpm, planetary rotation stepless 5 to 300 rpm, stroke speed of grinding spindle sleeve with quick stroke 0,5 to 12000 mm/min, stroke of grinding spindle sleeve 110 mm, diameter of grinding spindle sleeve 100 mm, NEW control: ADCOS CNC 800 (Swiss made) - RETROFIT ! read operating hours 64940, spindle hours 7633, with dressing spindle system: KAISER C 42 DC, magnetic clamping plate , with fire extinguishing device: Kraft Bauer Oil MIST collector: LTA industrial Air Cleaning complete documentation: Hauser and Adcos

SC ECOPELET-BRICHET SRL sells the industrial pellet press, with the following characteristics: - year of production 2023; - motor 37 kw in 8 poles; - electric panel; - with ring mold; - capacity 1000 kg/hour softwood pellets, 700 kg/hour mixed pellets (50% beech, 50% fir); - pellets with a diameter of 6 mm. The machine produces wood pellets which is a biomass fuel used by the customers who use pellet heat

The 2017 Mikformen TM800/3 is a versatile plastic thermoforming machine designed for sale. With a weight of 13,000 kg, this robust and precise machine offers a compact design, measuring 11.50 meters in length, 2.75 meters in width (including the electrical cabinet), and 2.85 meters in height. It is specifically designed for plastic thermoforming processes, with a maximum sheet width of 840 mm (with a 60 mm stretch) and the ability to handle sheet thicknesses ranging from 0.2 mm to 3.0 mm. The TM800/3 features a maximum product height of 130 mm in both positive and negative directions, and it achieves a cycle speed of 75 cycles per minute during dry-run operations. Equipped with powerful pressure forces of 60,000 daN for the forming station, 75,000 daN for the punching station, and 80,000 daN for the cutting station, this machine delivers precise and efficient results in plastic thermofor ...

The thermoforming machine is designed for producing deep-drawn formed parts using heated plastic film. The machine features a controlled unwinder to feed the plastic film from a roll and a toothed conveyor belt for automatic transportation through the machine. The film is heated from above and below in the heating station, then vacuumed and compressed air is used to pull it into a mold for deep-drawing. After cooling, the outer contours are trimmed, and the individual blanks are held in place by retaining collars. In the stacking station, the product blanks are pressed out of the film and stacked on a conveyor belt, which transports them out of the machine once a set amount is reached. The entire process is automated based on programmed specifications, except for the manual removal of finished workpieces at the outlet. The trimming and stacking stations can be adjusted for different prod ...

Used in Oil and gas exploration and Petroleum Refinery. The liquid flows through the bundle of tubes in a chamber where the exchange of heat occurs. It is mostly suited for high pressure applications. Two fluids flow through the chamber with different temperatures one through the tubes and other flows inside the chamber. A heat exchanger is a device used to transfer heat between two or more fluids. There are different categories of tubular heat exchangers; one of the most common is the shell and tube exchanger. A shell and tube exchanger consists of a number of tubes mounted inside a cylindrical shell. Two fluids can exchange heat: one fluid flows over the outside of the tubes while the second fluid flows through the tubes. The fluids can be single or two phases and can flow in a parallel or a cross/counter flow arrangement. The shell and tube exchanger consists of four major  ...

Salvador Superpush 200 Optimizer. Year: 2018 Condition bardo good, works only one shift. Regularly serviced. Possibility of loading and delivery.

Manufacturer: Trepko 2 lane filler Cup/tray dimensions 84 x 95 mm 2 lane filler 2 format sets for cups/trays 80 x 95 mm and 80 x 115 mm Applicable for yogurt, soft cheese, spreadable butter, etc. The offer includes some spare parts

Glatt model GS100 conemill, this machine is suitable for milling agglomerates back to initial size, granulating or reduction of oversized particles of wet and dry products to a specified particle size. Outputs of 20 to 150 kg per hour can be achieved depending on the product characteristics. The machine is manufactured entirely from polished Stainless Steel. Ex pharma.

The price is for the entire, complete line. It is possible to purchase individual devices separately. Used KRONES carbonated bottling line - capacity: about 7 000 bottles / h - Bottle formats: 330 ml, 500 ml, 700 ml, 750 ml, 900 ml, 1000 ml - The line worked with cider, sparkling wine and champagne. - Possibility of bottling beer in a returnable / non-returnable bottle - Possibility to check, run the line before purchase. Available on hand. The line includes: 1. bottle unloader for returnable bottles Kettner 1989 ( Kontipack E). 2. returnable bottle washer Krones 1988 Type 150/10-110 3. filling machine Krones VKV40/SV10/KK from 1988 - 40 pourers with ALCOA capper 4. capper Krones 5. bottle capper ADELSKI PP2010, 2007 (Adelski). 6. manual capping machine 7. installation for Velcorin 8. machine for putting on wire (Nortan, Minerva 80-120, 1995). 9. machine for app ...

W+H MATADOR Paper bag making machine (Flat & Satchel) Bag width: 50 – 310 mm Cut off length: 120-320 mm – 330-1560 mm Gusset depth up to 80 mm Max web width: 960 mm Speed up to 700 bags/min Counter of the number of paper bags Modernized electric system with push button control

Used Pedrazzoli SUPER BROWN SPECIAL Sheet metal machine The machine is mainly made up of: – Sheet metal pedestal. – Swivel head support ring to allow inclined cuts. – Pneumatic vice with locking handwheel equipped with anti-burr. – Machine base in cast iron. – Head with crown screw reduction. TECHNICAL DATA Three-phase motor 2 speed kW 0.75 ÷ 1.1 Blade holder shaft revolutions n/1 3 7 ÷ 7 4 Maximum blade diameter 250 mm. Minimum blade diameter 200 mm. Maximum vice opening 110 mm. Jaw height 60 mm. Refrigerant pump flow rate (m 1 head) 22 litres. Tank capacity 3 litres. Dimensions: B x H x D – 520 x 1770 x 1130 mm. Weight 150 kg

Used ONA ARICUT 250 Wire cutting edm machine Visible in Italy

Weinig Dimter Opticut 200 Classic optimizer - after the technical review - year of production 2004 - declaration of conformity, DTR - German production TECHNICAL PARAMETERS: min./max. entry length of the element 800/3500 mm min./max. entry width of the element 80/200 mm min./max. element input thickness 12/80 mm type of wood hard / soft dash cutting wood classification max. feed speed 120 m / min acceleration 5 m / s saw blade diameter fi 500 mm saw hole diameter 30 mm saw spindle speed 4600 U / min duration of 1 cycle 0.7 - 1.2 sec a powered conveyor at the entrance and a marking station with side tables for two markers conveyor belt total power 15 kW length measurement - fluorescence camera for 3 qualities receiving station - conveyor belt full optimization total length 8300 mm stub diameter 80 and 120 mm OptiCom Direct control power supply 400 V / 50 Hz

Optimizer PAUL 11 MKL - German production - year of production 2001 - full optimization - cutting cycle time 0.4 s main engine power 5.5 kW cutting width max. 180 mm cutting height max. 90 mm blade diameter 500 mm cutting cycle time 0.4 s max. material length 3500 mm min. material length 300 mm feed speed max. 200 m / min acceleration of 25 m / s2 automatic feeding system seven ejectors 4000 mm long cross chain feeder length of the receiving table 11500 mm stub diameter 2 x 125 mm

Optimizer GreCon Dimter OPTICUT 204 R with 3 ejectors - year of production 1998 - full optimization - cutting to a dash - width measurement - possibility of cutting aluminum TECHNICAL PARAMETERS: max. cutting length 4,000 mm min. element 200 mm max. cutting height 100 mm max. cutting width 260 mm blade diameter 500 mm engine power 9 kW feed speed max. 160 m / min acceleration 2 m / s2 optimization for length and value pneumatic pressure of the material three ejectors discharge tables Rotary table total length 2000 cm transport dimensions (length / width / height) 1,300 / 245/220 cm weight 3500 kg

Weinig GreCon Dimter OptiCut 101 R optimizer - German production - full optimization - year of production 1998 max. length of the cut material 3000 mm max. width 360 mm max. height 100 mm automatic length measurement blade diameter 500 mm main engine power 6.25 kW Graf-Syteco control optimization for length and value pneumatic side and top pressure 1600 mm receiving table total length 7000 mm transport dimensions (length / width / height) 560/240/200 cm weight 1800 kg

Weinig Dimter OptiCut S90 optimizer - after the technical review - German production - year of production 2005 max. length of the cut material 4500 mm max. width 360 mm max. height 160 mm automatic length measurement optimization in 4 quality classes total power 13 kW blade motor power 7.5 kW pneumatic side and top pressure disc diameter max. 500 mm OptiCom Assist control receiving conveyor 5600 mm two ejectors total length 13 m printer for marking elements cutting accuracy +/- 0.5 mm transport dimensions (length / width / height) 600/240/190 cm weight ~ 1800 kg

Features of the machine: 1. 4 compartment sealing for better stability of the bags 2. date stamp 3. valve applicator 4. 2 different moulding tools (e.g. for 250g and 1000g content) 5. conveyor belt loading 6. unloading conveyor belt 7. 4 head linear weigher 8. electronics from Schneider The machine is assembled and can be tested and demonstrated. Specifications: Voltage: 220V / 3Ph (380V) Film type: OPP/CPP OPP/CE MST/PE PET/PE Film thickness: 0.04 - 0.08 mm Film width: 140 - 520 mm Diameter Film roll: 320 mm outer and 75 mm inner Max. Bag Size: 80-160 mm (Front), 40-80 mm (Side), 80-400 mm (Length) Speed: 5-40 Bpm Weight: 750 kg Power: 7KW Horiz. Jaw heater: 4400W 220V Vert. jaw heater: 4600W 220V Air pressure: 0,65MPa Consumption: 0,6m³ / min Dimension: L 1400 x W1800 x H2020 Dismantling and transport must be organised by the buyer. It is 3 years old, h ...

ULMA Atlanta HI-TECH horizontal flowpack machine Including : - A feeding belt - One Atlanta Flowpack Options: Double roll holder Motorised film unwind Printed film detection cell Conveyor suitable for transporting trays and bare products (peppers) (possibility to add a top side) Used to pack fruits and vegetables. Maximum output: 80 bags / minute The removal will be at the expense of the buyer and the machine will be taken back without any return/guarantee from our side.

Used PFM Compact - Multipacking Flowpack produced by the Italian company PFM. Year of construction 2014. Year of commissioning 2015. The machine has been designed to hermetically package products of various types and also different sizes, using a cellulose plastic film. Equipped with SMART DATE X60 printer. The insertion of the products into the forming tube takes place via a lateral pusher which takes the products from the pockets of the belt and pushes them inside the tube, to then return back and allow both the subsequent reloading movement and the closing of the bag itself. The envelope has a closure on all 4 sides as well as obviously on the top and bottom. Aesthetically perfect. The machine was used to create multi-pack packages of pasta (5 packs of 50g each = 250g final weight of the package) 2 fixed tubes are supplied

Ricciarelli VS 70 packaging machine complete with Ricciarelli 10-head multihead. The packaging machine was completely redone 6 months ago and has been used very little since then, it is practically perfect. Selling due to switching to another type of packaging.

GNA MOBULA Flow Pack packaging machine. Inox. Year 2020. Film width up to 750mm. Packs baskets/trays up to 30x50 boxes. Ditto bulk product vegetables, celery, iceberg, Roman lettuce, broccoli, cabbage, etc., fully automated in the creation of customized product packaging. Flat/concave loading belt as required. Translating head, high speed. Double axis Top Reel, Box Motion Sealing System, Trays less packaging system, up to 70 packs/min

Flowpack Mondial Pack Macan S (DM Packaging Victoria 600) due to non-use. 330 mm sealing bars, 600mm band, 1 conformer 150x50mm, 1 conformer 220x30mm, 1 adjustable conformer, electrical predisposition for notch pitch reading, complete with some spare parts (resistors, collectors, etc.) Machine end of 2018, stopped since 2020, has worked little, is functional, but definitely needs fine-tuning.