unk used for sale

Used tank stainless steel, vertical tank, capacity 25.000 l. These are specialized tanks for holding warm chocolate. External coil heating or cooling (depends on medium fed into the coil). Tanks equipped with agitators for dense liquids. The tanks look like new, perfect condition, french production (of good steel), very shortly used (liquidation of the plant in France). Height 7m. diameter 2.7 m. 4 pieces available.

length:250 mm width:200 mm height:400 mm Base plate dim:400 x 400 mm

table length:1400 mm table width:1400 mm table height:740 mm weight of the machine ca.:1 t

Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

The Breaker device is used to form a foil on a roll, it enables the insertion of an opening-closing tape. The machine is powered by 380V.

The rewinder / perforator is used to rewind the foil from the thimble to the thimble with the control of the foil rewinding length. It also allows you to make perforation at a certain length. Thanks to this machine, it is possible to make very long pieces of foil, used in industry or agriculture. The machine is powered by 380V.

approx. 70 stubs from 0.5 - 8.0 mm, 1/10 mm rising Total length approx. 59 mm Head diameter approx. 19.2 mm Head height approx. 9 mm Shank length approx. 46 mm Shank diameter approx. 12.5 mm Thread approx. 12.4 x 1.3 mm (measured) Threaded length approx. 14 mm Colraces are slotted 3x

Conveyor belt with cleat belt, stainless steel, approx. 3.90 m long. Strap width approx. 62 cm.

Knife vegetable peeler carrot parsley cucumber. Carrot machine not for asparagus is very different. Carrots dont peel well on asparagus. Capacity 300 - 500 kg per hour Attention, a machine with a belt feeding the product to the knives - significantly improves and increases the efficiency of peeling. Machine without photocells and sensors, etc. simple, easy to clean and operate. Catalog and parts available. Completely different quality on the nose than on corundum

V195 1 electric steamboiler Loos/Germany EUR 1.500,- loaded year 1990, 6 bar, 164°C, capacity 115 kg/h, 81 kW, 380V/50 Hz, volume 85 ltr. EUR 1.500,- loaded ex works V196 1 electric steamboiler Roucka-Slatina/Czech. EUR 1.500,- loaded year 1993, 9,5 bar, 177°C, capacity 120 kg/h, 90 kW, 380V/50 Hz EUR 1.500,- loaded ex works

Description Brand Caselli ID 7208 Status Active Price 3.700 € + VAT Year of manufacture 2014 Location Oradea (RO) Wood drill for chair assembly Caselli manufactured in 2014 with 4 drill heads and motors. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

KF Pasteuristationsanlagen Capacity 6600 liters per hour Control technology of the revised 2007 -Full documentation -Fully serviced

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Ter Braak Type: depowder drum for mogul plants electrical: 380V, 3ph We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau unpacked

Technical data Units: horizontal: 3

Technical data Voltage 50 Hz 3x: 380 Volt Weight: 120 kg Dimensions: Length: 1200 mm Width: 630 mm Height: 1800 mm

Technical data Max. diam. of external gear: 600 mm Module max.: 20 mm Module min.: 0.5 mm Table load max.: 250 kg Distance between centres (min.): 25 mm Distance between centres (max.): 500 mm Error increase: 1:: 250 1:: 500 1:: 1000 Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1000 mm Width: 1000 mm Height: 2200 mm

Technical data Weight: 30 kg Dimensions: Length: 400 mm Width: 600 mm Height: 700 mm

Technical data Circulary table diameter: 400 mm Overall dimensions machine: Length: 700 mm Width: 600 mm Height: 1800 mm

Technical data Execution: barrel-burnishing Number of tanks: 2 Polishing bell Behältergrösse: hexagon up: 400 mm Charging hole:: 2 x Length: 150 mm Width: 150 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 2.2 / 1.6 kW Overall dimensions machine: Length: 900 mm Width: 800 mm Height: 1300 mm

Technical data Execution: one wheel Max. wheel diameter: 280 mm Voltage 50 Hz 3x: 380 Volt

Technical data Quantity delivered: 60 l/min Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 90 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 500 mm

Technical data Table length: 900 mm Table width: 530 mm

Technical data Table length: 700 mm Table width: 350 mm

Technical data Voltage 50 Hz 3x: 380 Volt Dimensions: Length: 1200 mm Width: 800 mm Height: 1200 mm Various accessories: Magnetic separator Paper filter facility

Technical data Screw diameter: 45 mm Pressure: ca 4 to Execution: Double column Table size: Length: 150 mm Width: 110 mm Slide stroke: 45 mm Distances: table to slide: 95 - 135 mm between the columns: 120 mm Overall dimensions machine: Length: 650 mm Width: 530 mm Height: 1350 mm

Technical data Taper in spindle: 50 ISO Machine´s weight about: 70 kg Overall dimensions machine: Length: 700 mm Width: 300 mm Height: 500 mm

Technical data Units: horizontal: 4 Number of positions: 4 Number of work stations max.: 4 Work-piece clamping: with device Voltage 50 Hz 3x: 400 Volt Overall dimensions machine: Length: 1800 mm Width: 1400 mm Height: 2000 mm