universal tool grinding used for sale

max. grinding diameter: 300 mm grinding length: 500 mm workpiece length: mm Number of axles: 6 St. centre height: 220 mm centre distance: 500 mm x-axis: 500 mm y-axis: 320 mm z-axis: 320 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m Height of centres 200 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis (B axis) 300 ° Grinding head tilting (C axis) +/- 30 ° Speed range of R axis 0 - 50 rpm Grinding spindle speeds, approx. 5,000 - 10,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features SCHÜTTE CNC ...

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Universal tool grinder DECKEL S 11 with accessories & tool cabinet -Grinding stroke 190mm -Grinding stroke for twist grinding 190mm -Longitudinal adjustment grinding spindle approx. 5mm -Vertical adjustment grinding head approx. 320mm -Transverse adjustment tool carriage approx. 100mm -Adjustment ranges: -Grinding head carrier approx. 800mm -Tool carrier approx. 215mm -Universal / part head approx. 330mm -Swivel angle / grinding head carrier 360 degrees / grinding head 360 degrees / tool carrier 360 degrees -Clamping surface tool carriage approx. 500x180mm -Max workpiece diameter between the tips 130mm -Max. workpiece diameter / flying clamping (universal parting head) 620mm -Digital display -Measuring optics -Other accessories ( SEE PICTURES) -Documentation -Tool cabinet

Ger RHC1500 Universal Rectifier. Indoor head. Distance between points: 1500mm. Maximum part diameter: 355mm. Point height: 180mm. Tooth diameter: 400mm. Power: 7.5hp. Weight: 4500Kgs.

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Foto von Kürzlich gelieferten  ...

grinding diameter: 350 mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 5,48 x 2,0 m Foto von bereits gelieferten Maschine (600mm Spitzenweite) mit gegebenenfalls anderen Optionen. Geometrisch überholt und neu lackiert. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Dre ...

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrisch überholt und ne ...

grinding diameter: 99999 mm grinding length: 99999 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m We offer the overhauling of your Kellenberger U-machine. Mail serial number and foto of the machine and you will get an offer. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrically overhauled with ...

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m Overhauled with geometric KELLENBERGER protocoll -2-axis DRO -Paper filtration Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erford ...

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Geometrisch überholt und neu la ...

grinding diameter: 350,450 mm grinding length: 600 mm centre height: 175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Foto von bereits gelieferter Maschine m ...

Prior sale reserved - errors possible Internal Reference Number: D-1143-2

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 1100 mm table speeds: 0,02-6 m/min : 130 kg cross travel: max. 270 mm : 130 inkl. Spannung kg : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service  ...

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-40 mm/Ø : 0-40 mm/Ø : ±6,5 ° longitudinal feed of the table: 1530 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service fo ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

Grinding machine for machine tools, especially small lathes, etc.

grinding diameter: 350 mm grinding length: 600 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±10 ° longitudinal feed of the table: 1100 mm table speeds: 0,02-6 m/min : 130 kg cross travel: max. 270 mm : 130 inkl. Spannung kg : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service  ...

Grinding spindle for turning steel quick-change systems for machine tools, especially for small lathes, etc. Delivery handling according to picture no. 3.

SAACKE UW I D CNC universal grinding machine was manufactured in Germany in 2020. The extremely powerful machine is designed for the fully automatic wet grinding of a wide range of tools, such as knives, cutters or drills. Machining is performed in a single work cycle, which significantly increases production efficiency, saves time and reduces costs. The SAACKE CNC tool grinding machine allows the use of a chain or pallet system for automatic tool feeding and machining of workpieces within it with a maximum diameter of 250 mm and a length of 480 mm. Precision tool grinding is performed in five numerically controlled axes (X,Y,Z,A,B) using grinding wheels housed in a 6-position magazine separated from the workspace with an automatic grinding wheel changing system. In order to guarantee high travel speeds and positioning accuracy, the X,Y and Z axes of the UWID CNC tool grinder are m ...

Ref. -No.: 10159 Manufacturer: KELLENBERGER Year of construction: 1974 Storage location: Halberstadt Country of origin: Schweiz Grinding Length: 1000 mm Grinding Diameter: 250 mm

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m Overhauled and modernized machine -DRO in x and z-axis -New BEMA tailstock with 0,1mm cylinder compensation -Park position for the tailstock -New automatic switch off when diameter is reached -Automatic switching from rough to finish grinding -Finish grinding feed electrical infinitely variable from 0-100% -Modernized infeed handwheel like on the new machines -swiveling operator panel -Splash doors -coverd x-axis with possibility to set an exhauster on top -New internal grinding device like on the new model -new hydraulic aggregate -New electric cabinet -Scontrol voltage 24V instead of 220V Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrS ...

Key data: 299 mm, 620 mm, 150 mm

Technical data of the machine: - Workpiece headstock: MK5 - Tailstock: MK3 - Center height: 150 mm - Center width: 680 mm - Grinding length: 620 mm - Grinding wheel left: 350 x 50 x 127 - Grinding wheel right: 250 x 25 x 127 . Geometry: The machine is completely dismantled up to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the Z and X axes are scraped by hand and restored to a like-new condition. After completion, the machine receives a measurement report according to the manufacturer's specifications Equipment of the machine (standard): • 1 workpiece headstock MK5, swivel • 1 tailstock MK3 • 2 grinding wheel holders • 1 abrasive headstock Ø 127, swivel • 1 hydraulic power unit • 1 set of operating tools and instruction manual The machine and equipment shown in this il ...

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Version R: Maschine hat Zentral ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

VOUMARD CNC 300 S/N: 300030 Used - Excellent Year: 2007 DESCRIPTION: Machine type: BU 1000 T L7400 Was recently removed from power due to routine upgrades and was making good parts with full functionality. Siemens 840D CNC Control. Manuals included. Has grinding capability for: Internal diameters External diameters Front faces Back faces Internal tapers External tapers Profiles Drive spigots Face keyways Cams Bilobes and trilobes Internal threads External threads Bearing tracks Located at our warehouse in Preston, Idaho. We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers. Included specifications are gathered from various sources such as firsthand inspection, owner or operator interviews, manuals, and OEM research. All machinery specifications, condition and detail ...

A Studer CNC universal cylindrical grinding machine in need of repair is offered. Mains voltage/frequency: 380V/50Hz, control: Siemens SINUMERIK System 3, drive system: Siemens SIMODRIVE, measuring system: Marposs E5. Including various accessories. Documentation available. An on-site inspection is possible.

Universal cylindrical grinding machine for external and internal grinding with accessories Features: - Automatic grinding cycles - X/Z axes electrically controlled - Table can be swivelled up to 30° - Swivelling grinding head - Short changeover times from external to internal grinding - Easy to use - Compact design Hours: 12936 Weight: 2300Kg Technical data: see picture Further details on request

grinding diameter:300 mm grinding length:540 mm centre height:175 mm total power requirement:20 kVA centre distance:1000 mm

Digital Grinding diameter 250 mm Grinding length 650 mm Accessories

Control Siemens Sinumerik 840D Max. workpiece diameter: 250 mm Max. workpiece length: 1500 mm Max. workpiece weight: 150 kg Internal grinding device Paper Belt Filter Centering tip Diamond dressing tile Grinding wheel change aid

Key data: 318 mm, 648 mm

JONES & SHIPMAN SUPREMA EASY 650 UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER (2010) Table: Swing:... 12.5" Distance Between Centers: 25.5" Table Travel 29.5" Max. Traverse Speed . 472" IPM HPG Increments .. 0.00005", 0.0005", or 0.005" Table Swivel 18 Deg. CCW, 16 Deg. CW Wheelhead: Total Infeed Travel:. 10.236"" Max. Speed .. 236" IPM Minimum Programmable Increment .. 0.00005" HPG Increments .. 0.00005", 0.0005", or 0.005" Swivel Range 190 Degrees CW 45 Deg. CCW External Grinding Wheels: Grinding Wheel Size, L.H. Standard:.. 14" x 2"W x 5"B R.H Standard: .. 12" x 1"W x 5"B Spindle Speeds (3):.. 1773, 2069 & 2400 RPM Motor Power: 5.5 H.P. Headstock: Swivel:.. 15 Degrees CW 90 Deg. CCW Speed, Infinitely Variable:.. 30 to 450 RPM Centers, Standard/Reduced ... #5 MT/#3 MT Approximate Weight: . 11,000 Lbs. Equipped With Internal grinding wheel attachm ...

Key data: 585 mm, 4064 mm

JARBE Universal Cylindrical Grinder Year: 1981 Technical Specifications & Features: • Swing Over Table: 23″ Distance between centers 160” • Hydraulic Table Traverse • Swiveling Table for Taper Grinding • Universal Workhead • Universal Wheelhead • Grinding Wheel Capacity: 20″ • Includes 2 Workrests • Equipped with Coolant System • Electrics: 440 Volt

Name: CNC cylindrical grinder Machine type: Preise TT60-20L-C1 Machining size range - diam.: 600x2000mm Controller: Fanuc Series Oi Mate-MD

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m Overhauled with geometric KELLENBERGER protocoll. Pictures of a similar 1000mm machine. Standard with: -New electric cabinet -New motor for the workpiecespindlehead -2-axis DRO Fotos of a delivered (1000U) machine with following optiones against extra ch ...

grinding length: - mm grinding width: - mm workpiece height: mm control: Fanuc total power requirement: kW weight of the machine ca.: 1550 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8860 Type: BUAJ 30 CNC Producer: JUNKER Created: 2002 Parameters: Control System: FANUC Series 210i-T Maximum grinding diameter: 400 mm Max. sanding length: 630 mm Weight: 2800 kg

KELLENBERGER 600U Universal Grinder Machine No. 721/441 Distance between centres 600 mm Centre height 125 mm Table orientation 11 degrees Grinding wheel for cylindrical grinding 400 x 50 x 127 mm Motor power 3 kW Spindle speed 1500 / 1700 / 2200 rpm Orientation of grinding wheel holder headstock 270degrees (3 x 90) Grinding wheel speeds 3600 rpm Boring for internal spindle 70 mm Workhead swivel 360 degrees Workhead speeds 20 - 400 rpm Wheelhead motor power : 3 kW Workhead head motor power : 0,9 kW Dimensions 2580 x 1680 x 1670 mm Weight 2200 kg

STUDER Favorit CNC grinding machine

Inv. Num. : 8949 Type: BUAJ 9 NC Producer: JUNKER Created: 2005 Parameters: Maximum sanding length: 320 mm Grinding diameter: 160 mm Tip stroke: 85 mm Drive power of the grinding wheel spindle: 2.2 kW Maximum speed of the grinding wheel spindle: 3600 1/min Machine height: 1700 mm Machine length: 2300 mm Machine width: 1800 mm Machine weight: 1400 kg

PONAR TARNÓW RUP-28 universal grinding machine was built in 1979 in Poland by the Fabryka Obrabiarek Specjalizowanych Ponar-Tarnów. The machine is used for precise grinding of both external and internal cylindrical surfaces in order to achieve the appropriate class of surface roughness and the desired shape. The grinding process is performed on a large work table by means of a grinding wheel that reaches a speed of 45 m/s. The machine’s design has been developed to ensure the highest stability and accuracy of the performed operations during many years of intensive use. All this makes the offered RUP 28 cylindrical and internal grinding machine an excellent choice for production plants, tool shops or workshops specialised in the reconditioning of machine parts. The total weight of the machine is 2600 kg. Technical specifications of the PONAR TARNÓW RUP-28 cylindrical grinding mach ...

The machine is in good technical condition, after prior agreement it is possible to test it. We offer the grinder separately, without extraction and track. For straight round or oval pipes.

The machine is in good technical condition, testing is possible by prior arrangement.

BERNARDO URS 1000 N universal grinding machine was built in 2021 in Austria by PWA Handelsgesellschaft m.b.H. It is an extremely versatile machine for precision grinding of both cylindrical and internal surfaces with a maximum length of 1000 mm. The best machining results during even the most intensive challenges are guaranteed by the precisely aligned work head with stable grinding wheel spindle. The grinding wheel spindle features adjustable sliding bearings consisting of three segments. It is adjusted hydraulically or manually according to the operator’s needs. Movement in the X and Y axes, in turn, takes place on precision, hand-grooved guides, ensuring high accuracy and smooth movements. The BERNARDO URS 1000 N also stands out for its sturdy, heavily ribbed construction with large panels, which is resistant to temperature fluctuations and deformation. The work table can be tilt ...

Haas UHS 1980 FL Universal Hand Lever Flat Grinder - Tip height 125 mm - Center width 450 mm (optional up to 600 mm) - Grinding length 350 mm - Table clamping area 800 x 115 mm - Max. workpiece weight: approx. 40 kg - Longitudinal movement (X-axis) 350 mm - Transverse movement (Y-axis) 180 mm - Height adjustment (Z-axis) 250 mm - Swivel (horizontal) 360° - Tiltability (vertical) ± 15° to 20° - Spindle speeds 2,800 / 5,600 rpm (gradual) - Drive power 0.75 kW - 1.1 kW - Grinding wheel holder cone 1:10 (standard) - Connection 400 V / 50 Hz - Magnet LxW 255 x 150 mm LxWxH 0.9x1.0x1.4 meters / Weight 650 kg

Internal grinding machine: grinding diameter: 300 mm grinding depth: 300 mm Travel distance - Z1: 470 mm Travel distance - X1: 200 mm Tilt angle - B2: 1/1000 ° power capacity: 3,5 kW External and face grinding unit (Z2/X2): Travel distance - Z2: 470 mm Travel distance - X2: 325 mm Drive power – External grinding spindles: 16,5 kW : 120 mm grinding diameter - cylindrical: 400 mm sanding belt length: 400 mm grinding wheel size: Ø 500 x 50 x Ø 127 mm Workpiece spindle unit: Travel distance - U: 470 mm Tilt angle – B1 with longitudinal adjustment: -1/+12 ° Tilt angle - B1 with workpiece spindle unit: -20/+30 ° Manual longitudinal adjustment of the workpiece sp: 470 mm Drive power – workpiece spindle: 3,8 kW turning speeds: 1-895 U/min Load capacity - Spindle head: 200 kg Centre height above the swing bridge: 200 mm total power requirement: 47 kW weight of the machine ca.: 10 t  ...

A universal external and internal cylindrical grinding machine Tachella, refurbished in 2021, is available. Center distance: 600mm, center height: 120mm, max. grinding diameter: 240mm, max. grinding length: 600mm, X/Z travel: 600mm/250mm, max. workpiece weight: 100kg/40kg. Machine dimensions X/Y/Z: approx. 2700mm/1900mm/1700mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.

grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Sch ...