ultra sun used for sale

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -EX: protected -Manufacturer: Nilfisk, ultra-compact industrial vacuum cleaner with side channel blower -Type: CTS22 H Z22 -Connection: 400 volts -Power: 2.2 kW -Number: 3 devices available -Price per piece -Dimensions: 1100/770 / H1270 mm -Weight: 127 kg / piece

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box, burner control, burner management, UV flame simulator -Manufacturer: Honeywell, Ultraviolet Flame Simulator -Type: 203659 7800 series Burner Control -Dimensions carton: 130/90/H80 mm -Weight: 0.2 kg

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Spare part: hydraulic control block comes from an Atlantic press brake type: HPT 13536 -Manufacturer: Rexroth -Valve type: S-4WE 10 F32 CG24/9Z4 C -Manufacturer: Sauer Sundstrand -Valve type: D24 SWH-G02-B2- -20 -Voltage: V -Pressure max: bar -Price: for all 5 pieces of valves -Dimensions: 600/700/H600 mm -Weight: 67 kg

Dowels - anchors, air layer anchors -Anchor: Ø 4 mm -Anchor length: 210 mm -Incl. Dowel: Ø 8 mm -Number per package: 250 pieces -Air layer anchors approved by the building authorities according to DIN: 1053 -(material no.1.4571/1.4401) -Dowel: (Ultramid B3S) -Number of packages: 60 -Price: per package -Weight: 6.5 kg/piece

Switchgear, control, UV light -Honeywell dynamic self- check ultraviolet flame amplifier -Voltage: 220/240 V AC 50 Hz -unused in original packaging: 4 -without original packaging: 1 -Number: 3x available -Price: per piece -Dimensions: 125/90/H50 mm -Weight: 100 g

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Hydraulic control block comes from a TRUMPF punch type Sunimat 400 -Manufacturer: Yuken -Valve type: MSW-01-X-30 -Valve type: FHCG-02-30-N-A100-1004 -Valve type: DSG-01-2B2-A100-5032 -Voltage: V -Pressure: max. bar -Dimensions: 340/290/H360 mm -Weight: 50 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Hydraulic unit: comes from a TRUMPF punch type Sunimat 400 -Motor: 2.2 kW 1440 rpm -Max. Pressure: 45-180 bar -Max. Liter output: 2.1-11.8 l/min -Hydraulic tank: 120 liters -Pressure relief valve: 1 -different valves: -Pressure accumulator: -Dimensions: 660/520/H1000 mm -Weight: 264 kg

Powerful cold light lighting system for macroscopic applications, lamps, lights, lighting -for: ultra high speed movies -Extremely high light output of up to: 2.3 million lux per head (20 cm working distance) -No thermal load: the illuminated objects

wire electrode, welding wire, welding wire -Net weight: 5 kg -Number: 1x packages available -Price: per package -Weight complete: 5.9 kg/package

Dairy Machinery UK officially offers E-SPIN Dairy Centrifuges In the regions of United Kingdom ,Ireland and Greece. We offer sales, installation, maintenance and stock holding of spare parts for quick response to all of our customers. Whenever it is necessary to separate liquids or remove ultra-fine particles, and when traditional filtration methods reach their performance limits, disk stack centrifuges are exactly what you need to achieve the best results…. Trailblazing designs, consistent and innovative research, superior materials and complete sharing of expertise, thanks to a lean and flexible structure: these are the key ingredients in our approach. They allow us to focus directly on our most important objective: maximum machine efficiency performance and total satisfaction for you. Al components are manuractured to the highest quality and safety standards.  ...

Manufactured: SIDEL SBO 16/20 Universal Eco2 Predis ultra clean YOM: 2011 Nominal capacity: 32.000 bph Current capacity: 25.600 bph in 2.0 L rect. Number of molds: 16 Equipped: with Sidel ARS air recycling system Neck personalization: 38 mm Unit complete with: •Preform tipper, hopper and feeder •Preform disinfection •Sidel ultra clean Predis

Qty. 1 Second-hand slitting line – still on foundation! Mfc.: SUNDWIG Built: 1990 Materials: Cold rolled steel coil, Hot rolled steel coil, galvanised steel coil Strip width: 400 – 1,700 mm Thickness: 0.4 – 3.0 mm Coil weight: 32,000 kgs Tensile strength: max. 600 N/mm² Final strip width after slitting: 50 – 1,600 mm Coil ID (uncoiler): 508 / 610 mm Coil OD (uncoiler): 550 – 2,100 mm Coil ID (recoiler): 508 / 610 mm Coil OD (recoiler): max. 2,100 mm Hydraulic pressure: 120 bar Feeding speed at straightener: 15 m/min. Feeding speed: 30 m/min. Operation speeds: 30-150 m/min & 30-300 m/min.

Used ultrafiltration station made by APV PCI A19 membrane type. New 1996. Previously worked on juice. Capacity 10000 liters/h. Temperature 50 C. Pressure 5,5 Bar. 24 KW motor. 19 membrans dia. 12,5mm

Used Mabex ultrafiltration. New: 2004. Capacity 18,000 L / h. 12BX. 50 C.

sheet width: 0150 mm coil weight: 2 x 0,50 t coil internal dia.: 250 - 650 mm coil outside - diam. ca.: 1600 mm 0: 1-10 U/min engine output: 2 x 0,75 kW, insgesamt 2 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Spreading manually via hand crank - Separate control panel - Drive infinitely variable via SEW motors and converters - Rear contact washer, front limiting ring - Loop control via ultrasonic transmitter loops Side guide including loop tensioning switch - Reel can be moved transversely +/- 50mm via ratchet - 4 protective bars for securing the coil Machine was only in operation for a short time The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0500 mm coil weight: 2,00 t coil internal dia.: 350 - 550 mm coil outside - diam. ca.: 1400 mm expansion: hydraulisch total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Hydraulic spreading - 6 pieces of clip-on arms for lateral band limitation - Frequency-controlled drive - Loop control via ultrasonic transmitter - Free-standing control cabinet - Pneumatic pressure roller from above, can be moved laterally - Engine brake - Swivel hand control panel - Reel can be moved hydraulically - Loading chair can be swiveled 90° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0600 mm coil outside dia.: 1500 mm weight max. in kg: 4000 kg width of sheet max. ca.: 3,60 mm sheet thickness - min.: 0,80 mm diam. of the rolls ca.: 80 mm nomb. of straightening rolls: 7 feed rolls: 2 speed: 5-30 m/min range of expansion ca.: 475-535 mm expansion: hydraulisch pinch roll: hydraulisch total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler type MS 4000 - Hydraulic spreading - Hydraulic pressure roller from above - Swivel-in limit roller at the front, contact disc at the rear - Auxiliary drive - Reel movable - Coil lifting table Straightening machine type MR 58 Rollers hardened and ground. - Pneumatically ventilated feed roller - Straightening rollers adjustable as a block - Lateral belt guidance at the inlet - Hydraulic band insertion aid - Straightening head can be opened - Large roll basket and transfer table at t ...

sheet width: 0150 mm coil weight: 2 x 0,50 t coil internal dia.: 250 - 650 mm coil inside-diam. ca.: 1600 mm 0: 1 - 10 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Spreading manually via hand crank - Separate control panel - Drive infinitely variable via SEW motors and converters - Rear contact washer, front limiting ring - Loop control via ultrasonic transmitter loops Side guide including loop tensioning switch - Reel can be moved transversely +/- 50mm via ratchet - 4 protective bars for securing the coil Machine was never in production - it is like a new one ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used ultrafiltration station made by Hugart. New 2000.

Car wash VAIOCS 1G Max. tool dimensions ... 530x320x200mm Max. workpiece weight ... 70kg Machine weight... 3000kg L x W x H ... 2800x1750x2400mm Cleaning process - solvent immersion degreasing alternatively with ultrasound -Immerse - Intermediate drying - Steam degreasing - Vacuum drying Electrical power: Heating capacity 33 kW Motor power 13 kW Cooling capacity approx. 15 kW Power consumption approx. 51 kW / 90 A Operating voltage 400 V / 50 Hz / 3/N/PE Compressed air approx. 6 bar

Bowl Cutter Seydelmann K 40 Ultra 40 liters bowl volume Operation via knee lever switches DGA control Noise reduction cover central point of lubrication Knife head with six knives Two knife speeds Two bowl speeds Two mixing speeds forwards

TORNOS MICRO-8 CNC turning centre built in 2008 in Switzerland is distinguished by its extensive machining capabilities, sturdy design made of the highest quality cast iron and compact size. The machine designed for ultra-precise machining of workpieces with a maximum diameter of 10 mm is equipped with two reliable spindles to maximise production efficiency in any production facility, even during the most demanding challenges. The main spindle and counter spindle with integrated thermal control, retractable collet and ceramic ball bearing run on guides with increased rigidity. Both spindles are powered by reliable FANUC motors, ensuring that the necessary power is supplied for the versatile use of all the cutting tools located in the 20-position linear magazine. The arrangement of the tools in the magazine has been made in such a way as to allow simultaneous machining on the main spin ...

VARIDAMP alcolor dampening CX equipment (additional equipment for cardboard until 1.2 mm) Ultrasonic double sheet control IR Dryer (Delivery) UV Dryer (Delivery) Logistics System Automatic format setting Automatic plate change Automatic washing device Chromed cylinders ALV 2 Double extension delivery Blower ionization on feeder CIPLink Ink profile presetting via CIP3 data ErgoTronic console with ColorTronic "19" TouchScreen Raise 630 mm complete ( feeder ,delivery and gallery) Grafix Hitronic S powder sprayer It's very well maintenance by KBA It's very good condition Available immediately

Sachman T10 HS milling machine, fully functional, with recirculating roller guides, Step-Tech ISO40 electrospindle, Colombo Filippetti 32-place tool changer, casing and sunken chip unloader, etc. To facilitate programming operations in the NC Selca 30345 can be interfaced with a CAM that is very simple to use but equally effective.

Extrusion line for blowing polymer films of type ABA, MODEL 2L800 Manufacturer RUIAN AOXIANG PACKAGING MACHINERY CO., LTD 2017 onwards Specifications 1. Film thickness: 0.01 - 0.1 mm; (Thickness: 8%) 2. Maximum film width: 800 mm 3. Recyclable materials: LDPE + CaCO3, PND + CaCO3, linear LDPE; CaCO3 content - maximum 40% 4. Maximum performance: 100 kg / h; 5. Dimensions (L x B x H): 6000 x 3700 x 6500 mm; 6. Weight: 4.5 t; 7. Main power: 70 kW; 8. Certification: CE European Compliance Certificate, SGS Independent Examination Certificate, National Compliance Certificate of China GB4455 Data sheet 1. Extruder (2 sets) 1.1 auger diameter: 55 mm 1.2 Ratio of length to diameter: 30: 1 1.3 Maximum screw rotation speed: 100 rpm. 1.4 Type of screw: mixed type, with a barrier 1.5 The material of the auger of the cylinder: 38CrMo (American certificate of protection of inventions  ...

Rotary mill M-SP-MIL-4 Producer IL SUNG Type The main technological model M-SP-MIL-4 Producer IL SUNG Year of release: 2003 1. Purpose Grinding large fractions of raw materials (semi-finished products) Main technical features Parameter value Shaft rotation speed 0-3000 rpm Power supply 380V / 50 Hz Resource consumption 4.7 kW Perforated sizing mesh No. 1, mesh diameter 2.5 mm Perforated sizing mesh No. 2, mesh diameter 2 mm Perforated sizing mesh No. 3, mesh diameter 1.5 mm Perforated sizing mesh No. 4, mesh diameter 1.2 mm 2. Special requirements for installation and assembly Installed horizontally on a vibration-resistant foundation 3. Power lines Power supply 380V / 50 Hz 4. Supply line points Three-phase power socket 5. Resource consumption 4.7 kW 6. Equipment performance 100 kg / h

Multiple Medifriger Biochrom Spekol B353POL Unicen food industry laboratory equipment for sale - Medifriger BL-S digital control refrigerated centrifuge. It works, it has hardly been used, so despite the possible years it has been here, it is almost new. - Biochrom® Asys Expert 96. Microplate reader. It works, has hardly been used. Preowned. - Analitik Jena Spekol 1500 UV/Vis spectrophotometer. It works and has been used continuously to this day. It is being sold as a replacement for a new one. - B353POL, Laboratory polarizing microscope, X-LED. It works, it has been used occasionally in the face of a high workload. It is being sold as a replacement for a new one. - Unicen 21 centrifuge. It works and has been used continuously until today. - P selecta ultrasound code: 3000617. It works and has been used occasionally. - Thermostatic bath, BAE model by Raypa. It works and has b ...

This high-quality laboratory freezer is a must-have for any lab that requires ultra-low temperature storage. With a spacious interior and sturdy construction, this freezer is perfect for storing a variety of items in a safe and secure environment. It is designed to maintain a constant temperature, ensuring that your samples remain fresh and protected at all times. Ideal for use in physical, emergency, dental, medical, microbiological, and biological laboratories, this freezer is made by PHCBI and is of the highest quality. It is a Type freezer, specifically designed for use in labs, and is branded PHCBI. Dont miss out on the opportunity to own this exceptional piece of lab equipment. Power Draw:0.81kWEcological Features:Designed and constructed for peak performance and reliability while maintaining efficient operating costs. Type:Upright Capacity:360l Insulation type:VIP High energy effi ...

The Milestone UltraWAVE microwave mineralizer is a unique device. Structurally and ideologically completely different from classic mineralizers with closed vessels. UltraWAVE works in SRC (Single Reactor Chamber) technology - a single reactor chamber. The said reactor is made of a thick stainless steel jacket, capable of maintaining extreme conditions inside: temperature up to 300 ° C and pressure up to 200 bar. This allows the full mineralization of the heaviest samples in an even shorter time. Inside the chamber, we can place several types of vessels (Teflon, glass, quartz) in a 22-position holder. The dishes are immersed in water. Thanks to this, we have an absolute guarantee that all samples are in the same conditions. The individual vessels (test tubes) are not closed or screwed, only the lid is put on, which greatly facilitates and speeds up the entire process and significantly  ...

For sale Merck water distillation set, Milli-Q Integral 3 with a 60l tank and a Q-POD dispenser. The following filters are installed in the set: Quantum TEX, Progard TS2, Millipak 40. In addition, I add a water level sensor and a Quantum filter. The device was purchased in 2017 but launched in 2021. Specification: - Supply water: drinking water from the tap - Flow: 3 liters per hour - Volume of water produced: 60L/day - Conductivity of produced water: 0.056 uS/cm - Resistance of the produced water at 25°C: - Ultrapure water: 18.2 MegOhm-cm - Pure water: >5 MegOhm-cm - Voltage: 100-240V/50-60Hz - Operating weight: 24 kg - Dimensions: - Depth: 48.4 cm - Height: 50 cm - Width: 33.2 cm Q-POD® ultrapure water dispenser Specification: - Resistance: 18.2 Mo.cm at 25C - TOC: 0.22um)

Key data: 1520 mm, 760 mm, 610 mm

machine details Stock-No. 1105-03957 Type of machine Machining Center - Vertical Make LEADWELL Type V 60 Year of manufacture 2006 Type of control CNC Storage location FRANCE HAGUENAU Country of origin Taiwan Delivery time CALL ME Freight basis EX WORK Technical details x-travel 1520 mm y-travel 760 mm Z-Travel 610 mm Dist. Milling Spindle - Table Surface 150 - 760 mm Table dimensions 1680 X 750 mm table load capacity 1200 kg Spindle motor 15 kW Spindle Speed: 10000 rpm spindle taper BT 40 Rapid traverse 20 m/min tool change unit 24 places Weight of tools max. 14 kg CNC Controller: Fanuc 18 imb total power requirement 30 KVA weight of the machine approx. 9 t Additional information - In Excellent condition - With machien documents - Rigid taping -WITH GOLDEN SUN 5 AXIS

Coextrusion Blow film line 3 layers CMG 55/75/55LHE – SW 2200 TA Year of production 2018 1. Extruder A – Single screw extruder 5530/LHE - Screw diameter 55 mm - L/D ratio 30/1 - Extruder drive – 66 kW AC - Nominal output in LDPE MFI 1.0 130 kg/h - Lever type screen changer 2. Extruder B – Single screw extruder 7530/LHE - Screw diameter 75 mm - L/D ratio 30/1 - Extruder drive – 118 kW AC - Nominal output in LDPE MFI 1.0 275 kg/h - Lever type screen changer 3. Extruder C – Single screw extruder 5530/LHE - Screw diameter 55 mm - L/D ratio 30/1 - Extruder drive – 66 kW AC - Nominal output in LDPE MFI 1.0 130 kg/h - Lever type screen changer 4. 3-Layer Blow film co-extrusion die CBH500 F/3S-IBC with D 275 mm, LDPE, gap 1,6 mm 5. Internal bubble cooling system - Introduction air fan 7,5 kW with heat exchanger battery - Extraction air fan 7.5 kW - ...

sheet width: 0400 mm coil outside dia.: 460 - 530 mm weight max. in kg: 2 x 2000 kg plate thickness: 0,40 - 3,00 mm coil outside - diam. ca.: 1500 mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm speed: 0-40 m/min total power requirement: 15 kW weight of the machine ca.: 5,20 t dimensions of the machine ca.: m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Floor cleaners, floor preparation products, floor coating -Manufacturer: Multi Clean, floor cleaner, floor preparation agent -Types: Ultra Brite II Ultra Primer -Type/Quantity: see photo parts list -Price/tax: complete -Transport dimensions: 1200/800/H400 mm -Total weight: 138 kg

Stephan MCH10/2 Microcut, continuous cutter, colloid mill, coial mill, ultrafine shredder Machine in neat condition Voltage: 400V Power: 4000/4500W Speed: 1415/2920rpm neat and smooth running Machine must be thoroughly cleaned before use Cutting gap: 1.3mm The machine was operated "inline" by the previous owner, so there is no circulation device, but this can be easily built with DN50 milk thread screws. Video about test run available

sheet width: 0260 mm coil outside dia.: 1200 mm weight max. in kg: 2 x 1000 kg sheet thickness - max.: 2,00 mm nomb. of straightening rolls: 19 diam. of the rolls ca.: 18 mm speed: 0-60 m/min run-in height: 1200-1400 mm sheet thickness - min.: 0,30 mm working direction left - right: ja/yes range of expansion ca.: 360 - 430 + 460 - 530 mm total power requirement: 13 kW weight of the machine ca.: 2,50 t dimensions of the machine ca.: 5,50 x 1,80 x 2,10 m - Speed control ultrasonic via belt loop - Digital measuring device - Motorized roller mill adjustment - Drive motor 8 kW - Hydraulic reel expansion - Pneumatic reel brake - Quick change device for the straightening rollers and support rollers - SIEMENS S5 control - Press inlet height 1200-1400 mm - Electrical plans in the control cabinet - Instruction manual available Dimensions: - Straightener with reel 3.00 x 1.80 x 2.10 m - Tape guide  ...

Awaiting refurbishment by our team at STV Machinery in Wellingborough, Northamptonshire is this 2002, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller and 36mm plasticising unit. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free op ...

Reference Num.: 3021 Brand: MAN Roland Type: Ultra RZU 4 Construction year: 1967 Size: 780 x 1,120 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 475 x 525 mm, max 780 x 1,120 mm Printing speed: max 7,800 sheets/hour Printing units: 2 Machine size: Length: 6,915 mm, Width: 4,090 mm, Height: 2,300 mm Total weight: kg 19,200 / lbs 42,329

Karl Schnell process machine with lifting device and loading trolley. Automatic process: FV175-200 Type 046 Hoist: 200 Type 601 Nominal volume 200 l, total volume 250 l Dimensions: L x W x H (mm): 2900 x 1850 x 2400, Weight: 1705 kg Platform dimensions: L x W x H (mm) : 1600 x 650 x 1800, unscrewable Performance and capacity: pre-crushing, ultra-fine crushing, agitator, vacuum pump. Max. steam temperature: 120 °C. Max. operating temperature: 110 °C. Max. vapour pressure: 2 bar. CIP cleaning: 2 bar, 85 °C. Year of construction: 2020 Newly purchased for product development, only approx. 900 operating hours. Very neat condition, like new. CE Mark: Yes Condition: Like new, meticulously maintained and ready to use. Availability: On request

Key data: 55 t

Specifications Model No.: PM-55T Serial No.: 94713 Punching pressure max: 55 tons Punching capacity max.: Ø 22 x 18 mm Diameter x thickness: Ø 50 x 8 mm Engine power (kW): 3.7 Working height: 1050 mm Projection: 310 mm Table size (LxW): 700 x 500 mm Weight: 1620 kg Year of manufacture: 9/1999 Country of origin:Taiwan

The MX-20 is a high-throughput planar radiography system that allows researchers to monitor animals quickly and affordably. This digital system can scan two to three animals at a time, depending on their size, and scans typically last 12 to 15 seconds. KV and exposure time settings can be easily changed using the computer screen or push buttons on the front of the unit. The MX-20 has geometric magnification capabilities up to 5X to provide ultra-high resolution images of small animals and specimens. The MX-20 has an energy range of 10-35KV and a tube current of 300uA. The focal spot size is

ULTRAFOCUS DXA is a high-resolution X-ray Dual Photon Absorption (DEXA) imaging and measurement system. The entire system comprises an X-ray unit and a workstation, and can be installed on the laboratory bench or directly in the vivarium to protect the integrity of the colony. With its 10 x 15 cm CMOS detector and energy range from 10 to 100 kV, ULTRAFOCUS DXA is ideal for imaging a wide range of samples and for true DEXA analysis. The microfocus tube and geometric magnification - up to X 6 - provide images with a resolution of 8 μm. In DEXA mode, the system automatically calculates lean and fat mass (BMD - BMC) with percentages. Data for the whole body and the area of interest (ROI) are presented. Used under GMP conditions, it has been out of service since November 2023.

WELEX SHEET CO-EXTRUSION LINE, running with ABS and PS, extruder 115 mm screw diam. 30 L/D, degassing system, 225 kw drive, 190 rpm screw speed, hydraulic screenchanger, hydraulic pack and accumulator, Maag gear pump 56/56, water cooled, gravimetrical blenders, Motan dehumidifying dryers, + Covema co-extruder with 60 mm screw diam. 24 L/D, 175 rpm, electrically heated, air cooled barrel, 18,5 kw drive, 1.650 mm EDI R75 ultraflex die., Flex range on the top lip of up to 1.9 mm. Mounted gap is ca 2.6 mm., Bottom lip is removable and has slotted bolt holes, adjustable to achieve a wider thickness range., One spare bottom lip available - thickness to be checked, 1650 x 400 mm Ø rolls, Static mixer, ABA co ex block with plate type inserts, 1.650 mm 3 roll polishing stack model 18x65 LHSL. 450 mm diameter rolls. Chain driven through selector gearbox. circa 5 hp dc motor. Upstack configuration ...

Line for extrusion of XPS polystyrene foam boards with ultra-low density 20 kg/m3 and compressive strength 250-300 kp using technology patented in Ukraine with a set of additional innovative devices. Board parameters: width up to 1200 mm, thickness up to 200 mm, length is not limited. Extruder 180/235mm L/D 28-40 manufactured by the Korean company MYUNG-IL FOAMTEC Foaming gases - CO₂, DME, HFC, HFO, propane-butane, isobutane. Pumping equipment set Capacity up to 50m3/h (1000kg/h) Weight – 60t. Line length -90m, width 6m. Power consumption – 650 kW The extruders operated for a year and a half after the plant was sold to another owner, and the rest of the time the line was in storage.

Challenge C4 inserting system, 9 stations with inline fold and alignment section For formats DIN C6 / C5 to DIN C4 Colour touch screen display Stat. 0 - Envelope station on Bsiss RB Stat. 1 - free station position Stat. 2 - Sep. motor for feeder Stat. 3 - Friction/sliding feeder Stat. 4 - Friction feeder (top feed) Stat. 5 + 6 - In-line folding unit incl. alignment section Stat. 7 - Vacuum round sheet feeder, drum diameter 145 mm Stat. 7 - Ultrasonic double sheet control Stat. 7 - Double deck for feeder C4 Stat. 8 - Vacuum round sheet feeder, drum diameter 145 mm Stat. 8 - Ultrasonic double sheet control Stat. 8 - Double deck for feeder C4 Stat. 9 - Vacuum round sheet feeder drum diameter 145 mm Stat. 9 - Ultrasonic double sheet control Stat. 9 - Double deck for feeder C4 - 3 transport chains - Cross transp ...

Heidelberg CD 102-4 Age: 2011 Size: 72 x 102 cm Counter: 156 mio. impression Performance: 15,000 sheets/hour Equipment: 4 color offset printing machine Straight machine Heidelberg Sheetfed Control Prinect PressCenter Intellistart Software Software package Color fast solution PresetPlus Feeder with ramp Ultrasonic detectors Autoplate Program controlled washup device for Inking roller Blanket cylinder washup device Plate Cylinder washup device Alcolor Vario Technotrans CombiStar Preset Delivery Sheet decurler Powder Star AP262 Static Star compact plus / Preset Air Star

Ultraviolet Document Coater Coating speed 11 - 20 m/min. Max. speed 4440 sheets / hour Paper thickness/weight 120 - 350 g/m2 Min. sheet size 216 × 270 mm (A4) Max. sheet size 508 × 710 mm (B2) Automatic setting for coating rollers from 120 up to 350 g/m2. Ait fixing for low weight paper, touch control panel for the operator. Automatic cleaning system.

Portable Leybold Helium Leak Detector Ultratest UL100Plus

Finger jointed line Grecon Ultra - Made in Germany - year of production 2001 - for softwood and hardwood -DTR TECHNICAL PARAMETERS: length of elements min/max 150/1000 mm element width min/max 40/205 mm height min/max 20x80 ratio min. length / max. width 2:1 initial length min/max 3000/6100 mm disc motor power 5.5 kW blade spindle diameter 30 mm cutter motor power 22 kW spindle diameter 50 mm total length 11500 mm width 5300 mm total power consumption 39 kW air pressure 8 bar air consumption 660 NL/min stub diameter 250 and 100 mm extraction requirement 6150 m3/h 30m/s transport dimensions 1300 cm x 220 cm x 200 cm weight 6700 kg

Blowing machine SIDEL SBO 16 / 20 capacity: approx. 25.000 bph - by 2,0 ltr. PET bottles year of manufacturing: 2011 working hours: 37.000 max. capacity: 32.000 bph neck type: 38 mm widemouth neck includes: - preform tipper - preform hopper / elevator - Sidel AGR preform disinfection - Sidel Predis Ultra Clean - vulcanic water/oil thermoregulator - electrical cabinet - control panel - Sidel PCC The machine is in an excellent conditon.