ult used for sale

Key data: 900 , 134 , 35

Now fully refurbished and in our stock in Wellingborough, Northamptonshire is this tie-bar-less Engel Victory 330/90 Tech injection moulding machine. Fitted with a 35mm plasticising unit which gives a maximum shot weight of 134 (PS) (g). This is a high specification machine with double core pull, CC100 controller, singe pneumatic core pull and 8 zone hot runner controller built in. It comes complete with system disks to suit the machine. The unique design of these machines allows for large tools to be installed with ease and often much larger than could go in comparable 90T machines with tie-bars. A very versatile machine with proven technology and good support from the people at Engel UK. This machine is now holding maximum lock, has no detectable wear in the plasticising unit and is cosmetically excellent. You can find out more about the work we’ve done to this specific machine by ...

Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nit ...

Ultrasonic banderolier ATS US 2000 LD; good condition; cleaned and tested; Bandwidth 30mm; loop machine; soft voltage; fixed loop size; Sheet width 340mm; Arch height 180mm; Score 437,000. Ultra sonic banding machine ATS US 2000 LD; good condition; cleaned and checked; band width 30mm; loop machine; soft loop; fixed loop; arch width 340mm; arch hight 180mm; counter 437,000.

Fully refurbished Hosokawa Alpine UPZ 100 used system by Alpine Originals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation (N2) Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system in large table fitted with pins (other grinding tools of choice could be offered for an additional price), small feeding hopper with a dosing screw, filter and barrel to collect the fines, blower and piping. Includes a relay control panel. This small size system with an universall mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mil ...

Micro Brewery Braumeister 500 L The Braumeister is the ultimate automated brewing system. For simplicity, ease of use and ease of cleaning it can’t be beaten. A 5 step fully automated control system makes brewing a breeze. The 500-litre system is ideal for a bar or cafe or a highly enthusiastic home brewer. Wheels, a hoist, compact, automated, jacketed for cooling and with a whirlpool operation, this is the ultimate small commercial brewing system. Technical Characteristics Manufacturer: Speidel GmbH Model: Braumeister 500 Litre Manufacturing year: 2016 Capacity: approx. 500 l finished beer / brew Quantity of malt: Max. 120 kg per mash Plato gravity scale: Up to 17 °P Control system: Speidel Gärmeister Heating spiral capacity: 6 x 3000 Watts Cooling jacket area: 1.8 m2 Wort pump: 370 Watts with speed control Electric connection: 18.4 kW / 400V / 50 Hz Material ...

Key data: 1000 , 158 , 40

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 40mm plasticising unit which gives a maximum shot weight of 158 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery undergo  ...

Ultrasonic banderolier ATS US 2000 LD; good condition; cleaned and tested; Bandwidth 30mm; loop machine; soft voltage; fixed loop size; Sheet width 340mm; Arch height 180mm; Meter reading 253,000. Ultra sonic banding machine ATS US 2000 LD; good condition; cleaned and checked; band width 30mm; loop machine; soft loop; fixed loop; arch width 340mm; arch hight 180mm; counter 253,000.

MINK MV 0312 B Dry claw vacuum pump Dry claw vacuum pump BUSCH MINK MV 0312 B DRY VACUUM – QUIET, EFFICIENT AND COMPACT Quiet operation Low noise level thanks to state-of-the-art acoustic solutions, can be installed at workstations Efficiency State-of-the-art claw technology, low energy consumption, minimized operating costs, almost maintenance-free operation, efficient air cooling Compactness Small size SPECIFICATIONS: Nominal flow rate: 290 m³/h Ultimate pressure: 150 hPa (mbar) Nominal motor power: 5.5KW Nominal engine speed: 3000 min⁻¹ Noise level (ISO 2151): 69 dB(A) Weight (approx.): 300 kg Dimensions (L×W×H): 940 x 500 x 650 mm Gas inlet: G 2" Gas outlet: R 11/4" Dimensional Drawing Dry claw vacuum pump BUSCH MINK MV 0312 B Manufacturer's code MV 0312 B Pumping speed Air at 20°C. Tolerance: ±10% Markets & Applications Biogas P ...

Busch MINK MM 1252 AV vacuum pump with 5.5 kW motor (flow rate 250 m3/h) Dry claw vacuum pump INDUSTRIAL VACUUM GENERATION – HIGH EFFICIENCY, LOW MAINTENANCE Busch MINK 1252 AV vacuum pump 250m3/h for CNC Significant energy savings compared to conventional vacuum generators, minimizing operating costs Almost maintenance-free operation Dry and contact-free operation Endurance Proven design for more than 200,000 vacuum pumps in operation Information: Vacuum pump: BUSCH MINK MM 1252 AV 250m3/h for CNC Ultimate pressure: 100hPa (mbar) Normal engine speed: 3000 min-1 ISO2151 Noise Level: 75dB(A) Weight: 240kg Zwnhrefr Dimensions: 101x51.5x45cm Gas inlet/outlet: G 2" / R 1" Motor: 5.5 kW 3 x 230/400 V, 50 Hz Speed: 3000 rpm Bg. 112M B5-250 IP 55 Inlet Side: G2 Check Valve Outlet side: Integrated silencer Inlet filter: with paper cartridge Technical Specif ...

TechnologieCNC Milling Machine CNC 1530 6kW INDUSTRY CNC milling machine 1530 6kW - INDUSTRY version ✅ Professional, industrial CNC milling machine mod. 1530 INDUSTRY with a 150x300cm working table equipped with an ultra-efficient 6kW electrospindle on a full ceramic bearing. The height of the Z axis is 300mm. ✅ The machine is protected by protective light barriers that prevent intrusion into the working area of the machine during operation. ✅ The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Information: Manufacturer: TechnologieCNC Model: 1530 INDUSTRY Electrospindle: 6kW at S1, 7.2kW at S6. 24000rpm on a full ceramic bearing Max. speed in slow travel: up to 33m/min Max. working speed in materi ...

Komori Lithrone LS 529 H-UV Age: 2015 Counter: 70 mio. Impression Format: 53 x 74 cm Substrate thickness: 0.06 – 0.8 mm Printing Performance: 16,000 sheets/h Equipment: 5 color machine Straight machine FAPC (Full Automatic Plate Changer) Komorimatic Dampening System Technotrans alpha.c with alcosmart Ink temperature control Automatic washing devices (Ink roller, Blanket, impression) Komori PQC-S (Print Quality Control System) Komori KHS-AI (KHS Advanced Interface for very short Make readies with minimum paper waste) Komori AMR (Automatic Make Ready) Komori Self Diagnosis Komori Smart Feedback Komori PCC 2.3x Komori PDC-SII (Print Density Control-Spectrodensitometer) Ultrasonic Double Sheet Detector Skeleton Transfer Cylinder Double-sized Impression- and Transfer Cylinder Cardboard Printing H-UV Dryer Baldwin Air Blast Cooler for UV-lamps High Pile Delive ...

Used thermopacking machine from Ulma, model TF-SUPRA. Year of production 2006. The machine uses two types of foil. The lower foil is plastic and, passing through the forming station under the influence of heat and stretching, takes the shape of the mold, creating a package. Once the foil has cooled, it moves to the loading area where the products are placed into the package, this function can be performed manually or automatically using special assistive devices. After filling the molds, the upper foil is placed above the mold and welded to it, it is possible to simultaneously create a vacuum in the package and fill it with protective gas. Ultimately, the cutting station separates the packages into individual or groups that leave the machine in exactly the condition in which the recipient is to receive them.

Key data: 1300 , 177 , 40

Arburg 470C 1300-350 with 40mm plasticising unit. The ‘C’ variant of machines from Arburg is one of our most popular requests (once refurbished). These machines were market leaders for quite some time and proved reliable and good value for money over the years. With a little refurbished magic from the team to bring them back to ‘almost new’, these machines now have a new lease of life. They might not be the most energy efficient, but they are by no means power hungry and when the low upfront cost is considered with low maintenance costs, it’s a very good value option. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cos ...

oil-lubricated rotary vane vacuum pump 220 PBO MT of the Italian manufacturer BGS General 220m³/h at 50Hz, ultimate pressure -0.99 bar 400V 5.5 kW

Hurco TM8 Type of CNC Hurco ULTIMAX Turning length 483 mm Turning Ø 256 mm Ø above the bed 548.6 mm Ø above transversing slide 320 mm Length between centers 584.2 mm X-axis 203.2 mm Z-axis 508 mm Spindle bore 61 mm Number of turrets 1 Number of tools on turret 10 Number of rotating tools 10 Turning speed 4800 rpm Spindle motor power 11.2 kW Tailstock

Description Remnants – GMP POLYNEX UltraBond hot laminating film 8×2 rolls GMP POLYNEX Goss UltraBond gloss 40mic, 305mmx500m OPP film glossy for digital prints, core 77mm The POLYNEX UltraBond hot laminating film has a newly developed special hot glue with particularly good adhesion to toner-based digital prints from e.g. Xerox (except EA toner of DC 240/250/260), Canon, Kodak, Konica Minolta. Particularly suitable for use in systems with automatic sheet separation. Processing temperature: approx. 105 C

This HURCO VMX 50 HS Vertical Machining center was made in 2002. It is equipped with a HURCO ULTIMAX control unit and has 3 axis. The machine has a spindle speed of 10000 rpm.

This Hurco VMX 50 S vertical machine center was manufactured in the year 2006 in Taiwan and has 44000 hours. It is equipped with a Hurco Ultimax control unit. It is equipped with Renishaw.

x-travel: 610 mm y-travel: 405 mm z-travel: 510 mm table surface area: 760 x 400 mm spindle taper: SK 40 spindle turning speed - stepless: 80 - 8000 U/min spindle drive: 7,5 kW max. torque on the spindle: max. 142 Nm feeds: 3,0 - 7600 mm/min rapid motion -longitudinal/cross/vertical: 24 / 24 / 15 m/min distance table / vertical spindle: max. 600 mm table load: 350 kg no. of tools in magazin: 24 workpiece diameter at full load: 80 mm tool length - max.: 300 mm weight of tools max.: 6,8 kg control: ULTIMAX SSM total power requirement: 18 kVA weight of the machine ca.: 4,1 t Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical parameters Laser power 1000 W Laser source type optical fibre Source manufacturer MAX Photonics Length of laser waves 1064 nm Weldidng speed 0-120 mm/s Input current 230V 50Hz Kit includes: - Automatic wire feeder -Cooler 24 month warranty You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. B8a32e7mlf Laser welder LWH-1000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - Automatic Wire Feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 H ...

You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. Laser welder LWH-2000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual pla ...

This Hurco VMX30 Vertical Machining center was manufactured in the year 2000 in Taiwan. It is equipped with a Hurco Ultimax control unit. The machine has a spindle speed of 10-10000 rpm.

This HURCO VMX 24 T Vertical Machining center was manufactured in the year 2007. It is equipped with an Ultimax 4 control unit and has 4 axis.

Used Alfa Laval decanter centrifuge model Aldec 40. New: 2007. The set includes: - decanter centrifuge - Ultromat dosing station - polymer pump - Netzsch sludge pump - centrifuge control cabinet - control cabinet of the compaction installation Technical parameters of the centrifuge: - maximum cake density 1.2 kg/dm3 - temperature 0-100 degrees C - maximum speed 4000 rpm - 2-stage planetary gear - gear max torque 2.5 kNm Gear ratio 1:159 - drum length 1460 mm - drum diameter 353 mm - cover/cover material AISI 316 - inner surface of the AISI 316 cover Centrifuge dismantled. All devices were technically efficient and in operation until dismantling.

Heidelberg XL 105-8-P, Year of man.: 2011, The machine has been equipped to AMS LED UV lamp, DryStar LED UV, Impr.: 159 mil., Perfecting: 8/0 -4/4, Wallscreen, Prinect Press Center, Prinect Inpress Control, AutoPlate XL - simultaneous plate changing, PPF Preset Plus feeder, PPD Preset Plus Delivery, Non-Stop feeder, Alcolor, CombiStar, Program-controlled washup device, Ultrasonic double sheet detector, Antistatic device, feeder and delivery Compact, Perfect Jackets, Delivery (normal X0), Powder WEKO AP 500 Duo, CleanStar, AirStar Pro, Air cooled, Max speed – 18.000 s/h

Vertical CNC machining center Manufacturer Hurco Type VMX 50 Control Ultimax ( all options unlocked ) Year of construction 2006 24 compartment tool changer spindle speed 10,000 rpm Tool holder SK40 IKZ internal coolant supply Travel X/Y/Z 1270/660/610 Conveyor Machine is in a used 100% functional condition.

Vertical CNC machining center Manufacturer Hurco Type VMX 30 Ultimax Control Year of construction 2008 spindle speed 10,000 rpm Chip conveyors Travel X/Y/Z 760/510/610 24 compartment tool changer All control options unlocked Machine is in good condition Delivery not yet known because new machine is only being ordered

Automatic pyramid tea bag forming and filling machine including volumetric dosing unit. Generally it is suitable for common rectangular tea bags or pyramid tea bags. Bag forming method: ultrasonic welding. Tag and thread must already be incorporated into the film. - Specifications: max. speed of the machine in neutral: 50 cycles per minute | dosing volume: 5~40 cm? | tea bag capacity: 1.5-10g | tea bag dimensions: pyramid bag: 50 / 60 / 70 / 80 mm, rectangular bag: LxW: 50x50 / 60?58 / 70?65 / 80?72 mm | roll width bag material: 120 / 140 / 160 / 180 mm | suitable bag material: P.E.T / nonwoven / nylon fabric | power supply: 220V, 50/60Hz | power consumption: 1.2kW | compressed air required: 0.6 MPa | compressed air consumption: 100l/min | machine dimensions LxWxH: 944x1130x2100 mm | weight: 420kg.

Automatic liquid filling and capping system. Suitable for various liquids and oils from the food industry (water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as from non-food (perfumes, cosmetic oils, detergents, etc.). The liquid filling system has 2 filling heads moving in vertical and horizontal direction, which allow continuous filling and thus a higher number of cycles. Automatic detection of the position of the bottles and of the neck diameter of the lid. The Advantage is less adjustment work and sensor settings (within a certain range) have to be carried out. The change to different bottle dimensions is considerably facilitated, which ultimately results in lower machine downtime due to the time savings. Easy adjustment to different bottle width and height without the need for additional format sets. After filling, the bottles are conveyed by a conveyor belt to the au ...

Automatic Polyamide Triangular Tea Bag Packaging Machine, including volumetric cup filler. Discontinuous feeding Controlled by step motor. Bag forming method: Triangular seals by two sets ultrasonic sealing units. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | dosing system weighing scale (standard device): 1-5g | accuracy = ?0.2g | packing material: polyamide, PET mesh, non-woven fabric, any material can be sealed by ultrasonic | tea bag dimensions: triangular bag: 50-80mm | flat pouch: W(60-80) x L(40-80)mm | film width: 120mm, 140mm, 160mm | power supply: 220V, 1.2kW | weight 600kg | machine dimension: L1200xW900xH1800mm (subject to the final design). Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock.  ...

Basket size LxWxH:550 x 300 x 350 mm No. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °C Ultrasonic cleaning unit with high alloybasket - Ultrasonic frequency 28 kHz - automatic breakdown for heating and ultrasonic for low level water

Packaging system for fully automatic dosing, filling and packaging of tea in tetrahedron tea bags. Dosing of the tea by an 8 head linear weigher included in the price. The tea bag packaging machine uses ultrasonic sealing technology to produce traditional tea bags or tetrahedron (pyramid shaped) tea bags. The tee bags are finally packed in an outer bag, 3-side-seal bag or center-seal bag. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | number of weighing heads: 8 | weighing range: 1~10g | accuracy: ?0.1g/bag | tea bag dimension: tetrahedron tea bag: 50-80 mm per edge, traditional tea bag: W(60-80)xL(40-80) mm | suitable film type: nylon, non woven, PET, PLA | film width: 140 mm, 160 mm, 180 mm | outer bag dimensions: W(80-120)xL(90-120) mm | power: 220 V, 1.5 kW | product contact parts from SUS304 | air pressure: 6 bar | dimensions of the packaging system: depe ...

Water treatment plant Manufacturer BWT Type Septron Line 40 VAL Year of construction 2013 Capacity: 900 L/h ultrapure water Inlet pressure: 6 bar(g), raw water pressure 4-6 bar, raw water flow 1300 l/h Maximum temperature: 50°C Various electrical individual connections

Heating output: 2000W, ultrasonic frequency: 40kHz, weight: 275kg.

Machine Details Stock number 1105-037895 Machine type machining center - vertical Brand HURCO Type VMX 40 Year of construction 2000 Control type CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight base from site Technical details x-travel 1060 mm y-travel 508 mm z-travel 650 mm Working surface 1200 X 610 mm Motor power (30 min. ED) 15 kW Distance between table and spindle 150 - 760 mm Torque 600 Nm rpm 30 min ED 22 Tool changer 30 times Ultimax 4 Control Machine weight ca. 6 t Information HURCO VMX 40 BORN 2004 CNC ULTIMAX 4 Synchronous.Thread 8000 rpm SPAENEFOERDEREr

Working width: 3500mm, with circumferential unwinding, fettling box, accumulator, inspection table, ultrasonic cutting unit, fettling box and circumferential rewinding.

Size max: 738 x 1100 mm Size min: 210 x 297 mm Longest fold: 560 mm Shortest fold: 35 mm (58 mm at pocket 1) Paper thickness: 40 - 250 g/m2 Staplehight: Palet feeder: 1200 mm - PFU-74F pallet feeder - Touchscreen Monitor - Automatic setting - 1. Station 6 folding pockets 2. Station 1 knife plus folding pocket left 3. Station 1 knife - Downstream slitter shafts in the first and second folding unit - electron. Ultrasonic-double sheet control - Creasing and perforating device - PSX-56 High-Perfomance Package Delivery

The SolidC UltraPure pump is an efficient and economical centrifugal pump, which meets the requirements of industries pharmaceuticals. It treats products gently and is resistant to chemical agents., Pump: centrifugal pump, dn (mm): 34 , engine type: WEG, Engine power: 380V 50Hz 7.5kW, Link to manufacturer: https://www.alfalaval.fr/produits/transfert-des-fluides/pompes/pompes- centrifuges/solidc-ultrapure/

Key data: 900 , 252 , 48

Our team are currently working on this 2008, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller, 48mm plasticising unit with bi-metallic barrel and single core pull and two 16A sockets. It has only 35,000 recorded run hours. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault  ...

CNC 5-axes Universal Machining Center HURCO mod. VTX U Manufacturer: HURCO Type: VTX U YOM: 2005 Control: Ultimax 4 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 510 mm C-axis: 360° A-axis: -30°/+110° Spindle speed: 12.000 rpm Spindle motor power: 18 kW Spindle taper: BT 40 Distance between spindle and table: 660 mm Max weight loadable: 260 kg Cooling tank capacity: 380 l Tool magazine stations: 32 Electric connection: 380 V Dimensions (LxWxH): 3720x2700x2900 mm Weight: 13.200 kg

Parts cleaning system Manufacturer: LPW Type: Programat FW670/1 Year of construction: 1996 Medium: Water Heating capacity dryer: 12 kW Exhaust air: 500 m3 / h 400 V 90 A 50 Hz Capacity: 0.6 m3 Heating capacity other bathrooms: 12 kW Connected load electr.: 50 kW Ultrasonic device Rated power: 4 kW Length without table: 3000 mm Length with table: 3700 m Width: 1600 mm Height: 2500 mm Weight approx.: 3 to

Process paths (X/Y/Z): 300mm/320mm/100mm, 3-axis interpolated, 16 inputs and 16 outputs, programming control panel, memory card, with CE. ULTRASAVER dosing kit: pressure range: 0-7bar, viscosity: low to high. Cartridge holder for automatic dispensing systems: Holder size: 3cc, 5cc, 10cc, 30cc or 55cc, with spacers. JR-1001 mechanical zero point correction.

Volume flow: 250m³/h, ultimate pressure: 250bar, weight: 220kg.

- Hersteller: HURCO - Model/Typ.: BMC4020HT/M - Baujahr: 1997 - MFG.No.: 029 Verfahrwege: - X-Achse: ~ 1020 mm - Y-Achse: ~ 510 mm - Z-Achse: ~ 610 mm - Steuerung: Ultimax 3 Hauptspindel: - Hauptspindel: max. Drehzahl 8.000 U/min - Hauptspindel Leistung: 15 kW - Werkzeugaufnahme: SK 40 Arbeitstisch: - Tischaufmaße 1220 x 510 mm - max. Tischbelastung ca. 700 kg - Werkzeugwechsler: - Anzahl der Werkzeugplätze 24 Stück - max. Werkzeugdurchmesser 100mm - max. Werkzeuglänge 300mm - max. Werkstückhöhe 250mm (bei einer Werkzeuglänge von 300mm) - max. Werkzeuggewicht 7,0 kg - Maschinengewicht ca. 5,6 to - Standort: demontiert, am Lager D-32825 Blomberg

diameter: -- mm workpiece length: -- mm work piece width: 15 mm range of angles: 15-50 ° plate thickness: 6-40 mm total power requirement: 1,5 kW Feed speed: 3,5 m/min. dimensions: 530 x 395 x 860 mm weight of the machine ca.: 94 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from a ...

This Fortus 450mc has been used very little. The number of operating hours is approx. 260h and the last maintenance was carried out in 07/2019., operating hours: approx. 260 hours, Installation: 02/2021, Installation space in mm (x/y/z): 406×355×406mm, software: Control Center™, GrabCad Print (Download), Insight Software License, network connection: LAN (Ethernet), operating system: Microsoft Windows Server 2012 R2, Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM, building material: ABS-ESD7™, ABS-M30, ABS-M30i, Addigy® PA6/66-GF20 FR LS, Antero 840CN03, Antero™ 800NA, ASA, FDM HIPS, FDM Nylon 12CF, FDM Nylon 12™, Kimya Kepstan® PEKK-SC , Kimya PC-FR, PC, PC-ABS, PC-ISO™, ST-130, ULTEM® 9085 Resin (colored), ULTEM™ 1010 resin, ULTEM™ 9085 resin, Victrex AM™ 200, Layer thickness: 0,127mm, numb ...

USED CENTRIFUGAL MOLECULAR DISTILLATION SYSTEM Manufacturer: MYERS VACUUM, Inc. Model: PILOT 15 LAB Throughput Capacity 10 - 80 lbs/hr (4.5 – 36.3 kg/hr) Type Continuous Pumping system ultimate pressure: 2 X 10-4 Torr Operating Pressure 10 -3 Torr to Atmosphere Mechanical Forepump >11 CFM High Vacuum Pump 320 L/sec of air at 250C. Power: 10-15 KW/ hour 3 phase wye” 115/208 V, 5 wire 50/60 HZ Available for 230, 415 or 460 Volt. Water: (20°C) 2 gal/min (7.6 L/min) Liquid nitrogen consumption: 0.5 liters/ hour (Utility consumptions may vary depending on process conditions) Dimensions: Height 69 Inches (1.75m), Width 34 Inches (.86m), Depth 59 Inches (1.5m) Net Weight 1300 lbs. (590kg) Centrifugal molecular distillation is a purification technique, which has gained wide acceptance in the chemical, food processing, pharmaceutical, and petroleum industries as well as t ...

Key data: 300 , 49 , 28

Now fully refurbished is this four tie-bar BOY 30 tonne clamp machine with Dipronic controller . The Dipronic controller fitted to this machine and other ‘D’ series has stood the test of time and is now even demanding a premium. The controller and setup of the machine is straightforward, easy to problem solve and great for learning. Without expensive computer controlled systems, the cost of any repairs are often very low and easily carried out. The machine offers excellent platen dimensions and tie-bar clearance for the footprint, these machines are some of the most popular in the market for their niche. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machi ...

Stephan MCV12 Microcut, continuous cutter, colloid mill, koial mill, ultra-fine shredder Voltage: 400V Speed: 2900rpm Power: 8800W Stainless steel funnel Spout with DN50 milk thread, thus the possibility of retrofitting a circulation device for product circulation neat condition smooth running should be thoroughly cleaned before use Video about test run available

Capacity: 250 hl/h , Measuring range: 20 °Plato (ultra sonic) , CO2-content: 5 g/l, Operation / Control: Fully automatic / Simatic S7, Features: Water deaeration and Blending unit (PLATO Monitor, Controller and ultra sonic device type MP-25), membrane water deaeration (water line, membrane module, CO2-line, vacuum-line, plate heat exchanger, pressure booster pump) Control cabinet, plug-in construction with 2x 6 static mixers