1000 offers

maximum number of results exceeded > 1000
please refine your search

New in: 1994
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

For the recycling of lubricants and oil, separator: OTB2, connected load: 0.75kW, output: 400l/h. more

New in: used
Price: used machinery auction RESALE 200 €
Location: Land-de DE Germany, 73230 Kirchheim unter Teck
Seller: Surplex GmbH

Weight approx.: 50 kg Dimensions (l x w x h) approx.: 300x200x300 mm Description: VOGEL MF 5/BW 7 Other Equipment central lubrication 27 bar content: 6 l more

New in: 2004
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

ARBURG 320 K 700-250 Year of construction: 2004 Injection unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Dispensing volume: 106 cc Clamping unit: Clamping force: 70 t Tie bar distance: 320 x 320 mm Size of the clamping plates: 476 x 476 mm Ejector: hydraulic Clamping unit: knee lever Control: SELOGICA Additional equipment: EUROMAP 12 Robot interface Hydraulic core pulling x 1 Central lubrication system Dimensions: Weight: 2350 kg Length/width/height: 3.37 x 1.45 x 1. 99m Drive: Pump/motor: 15 kW Heating capacity: 7.6 kW Total capacity: 22.6 kW Price: On request more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

automatic, working width 420 mm, thickness 10 mm,\r\nlubrication system for the knives\r\n more

New in: 2000
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

ARBURG 320KS 700-250 Year of construction: 2000 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1820 bar Dispensing volume: 144 CC Clamping unit: Clamping force: 70 t Tie bar distance: 320 x 320 mm Size of the clamping plates: 476 x 476 mm Ejector: hydraulic Clamping unit: knee lever Control: SELOGICA Additional equipment: Central lubrication system Dimensions: Weight: 2270 kg Length/width/height: 3.37 x 1.45 x 1. 99m Drive: Pump/motor: 15 kW Heating capacity: 6.1 kW Cylinder heating: 21.1 kW Price: On request more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

table-model with movable table\r\nworking width 400 mm, thickness 10 mm,\r\nlubrication system for the knives more

New in: 1988
Price: request quote
Location: Land-at AT 5580 Tamsweg ( Salzburg ) / Austria // Europe, Nr. 31
Seller: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools

MOTAN drying system mod MDC 200 HT / BJ. 88 / 8 PCs of dry silos of 100 litres / Selvac 2 / air - coolers / 1 E.Technik - 1 G. TEC / good condition fe.gi.maschinen.sbg.at MOTAN drying plant mod. MDC 200 HT / year 88 / 8 pieces dry silos of 100 liters / Selvac 2 / air - recooler / 1 E.Technik - 1 G. TEC / good condition Fe.gi.Maschinen.SBG.at more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

working width 450 mm, thickness 10 mm,\r\nlubrication system for the knives\r\n more

New in: 1996
Price: request quote
Location: Land-de DE 94094 Rotthalmünster, Kaina 2
Seller: Maschinen Stumpf GmbH

Machining center CHIRON GERMANY DZ 12 W manufacturer: Chiron - Werke GmbH & CoKG Tuttlingen Name: CNC - double spindle Centre type: Chiron (high speed) DZ 12W / 12WZ Year of construction: 1996 Control: Siemens Sinumerik 810 M Tool holder: SK 30 Tool capacity: 20 Machine table ever. Lxw: 660 x 400 mm clamping surface: 350 x 600 mm Changing table size approx. 930x660mm Spindle distance: 250 mm Spindle speed. Up to 10 500 u/min x: 300 mm y: 300 mm z: 425 mm Power supply: 52 A; 380V; 50 / 60 Hz Weight: 4200 KG Note: until front short in the work process Extras: each side of the engine table option for hydraulic clamping of workpieces. Accessories: machin ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

Modell 650.460.11.35.20, semi automatic\r\nworking width 460 mm, thickness 11 mm,\r\nlubrication system for the knives\r\n more

New in: 2001
Price: request quote
Location: Land-de DE Baden Württemberg
Seller: METEC GmbH

Punch laser combination machine Make: Trump card Type: TRUMATIC 6000L-1600 Year of construction: 2001 Hours of operation: 54.341 h / 12 h 015 Control: Siemens Sinumerik 840 d Laser power: 3200 Watts Punching power: to 22. Work area: 3085 x 1650 mm Maximum sheet thickness: 8 mm Maximum workpiece weight: 230 kg Maximum punching diameter: 76.2 mm Dimensions: Lxwxh = 9100 x 7900 x 2400 mm Weight: 22,500 kg Accuracy: +/-0.10 mm Standard equipment Sturdy C frame Coordinate management with integrated linear magazine Tool places: 17 Clamps: 3 Drives: Maintenance-free three-phase servomotors Programmable presser to set up Sensor-controlled part slides 500 x 500 mm for punch ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

working width 450 mm, thickness 10 mm,\r\nlubrication system for the knives more

New in: 1999
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

BATTENFELD TM 500/210 Year of construction: 1999 Injection unit: Screw diameter: 35 mm Shot weight: 131 g Injection pressure: 1500 bar Dispensing volume: 144 CC Clamping unit: Clamping force: 50 t Tie bar distance: 320 x 320 mm The clamping plates size: 490 x 490 mm Ejector: hydraulic Clamping unit: knee lever Control: Unilog B2 Additional equipment: Hydraulic core pulling x 1 Central lubrication system Dimensions: Weight: 2500 kg Length/width/height: 3.51 x 1.18 x 1.63 m Drive: Pump/motor: 11 kW Heating capacity: 10.4 kW Total: 21.4 kW Price: On request more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

semi automatic, working width 400 mm, thickness 10 mm,\r\nlubrication system for the knives more

New in: 2002
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

BATTENFELD TM 500/210 Year of manufacture 2002 Injection unit: Screw diameter: 35 mm Shot weight: 131 g Injection pressure: 1500 bar Dispensing volume: 144ccm Clamping unit: Clamping force: 50 t Tie bar distance: 320 x 320 mm The clamping plates size: 490 x 490 mm Ejector: hydraulic Clamping unit: knee lever Control: UNILOG B2 Additional equipment: EUROMAP Robot interface Hydraulic core pulling x 1 Central lubrication system Dimensions: Weight: 2500 kg Length/width/height: 3.51 x 1, 18 x 1. 63m Drive: Pump/motor: 11 kW Heating capacity: 10.4 kW Cylinder heating: 21.4 kW Price: On request more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

type Allzweck 80, oil lubrication slicer blade\r\nmoon shaped blade, thickness adjustable approx. 2,5 - 10 mm\r\ncapacity 290 slices/min. more

New in: 2003
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

BATTENFELD TM 750/210 with robot Battenfeld P5 Year of construction: 2003 Injection unit: Screw diameter: 30 mm Shot weight: 96.5 g Injection pressure: 2042 bar Dispensing volume: 106 cc Clamping unit: Clamping force: 75 t Tie bar distance: 370 x 370 mm Clamping plate sizes: 590 x 590 mm Ejector: hydraulic Clamping unit: knee lever Control: UNILOG B4 Additional equipment: Hours of operation: 39.749 EUROMAP Robot interface Hydraulic core pulling x 1 Injection unit cured - bi Central lubrication system Proportional valve on two injection units - the precise injection Robot Battenfeld P5/26797 Year of manufacture: 2007 Weight: 200 kg Dimensions: Weight: 3000 ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

type 28 M / 50 / oil, lubrication slicer blade\r\nmoon shaped blade, thickness adjustable approx. 2,5 - 10 mm\r\ncapacity 220 slices/min. more

New in: 2002
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

BATTENFELD TM 1000/350 / machine in excellent technical condition Year of construction: 2002 Injection unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Dosing volume: 169 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 420 x 420 mm Clamping plate sizes: 640 x 640 mm Ejector: hydraulic Clamping unit: knee lever Control: Unilog B2 Additional equipment: EUROMAP Robot interface Core move x 1 Central lubrication system Auto tool installation height Dimensions: Weight: 3600 kg Length/width/height: 4.18 x 1.33 x 1.86 m Drive: Pump/motor: 15 kW Heating capacity: 10.4 kW Total capacity: 25.4 kW Price: On request more

New in: 1987
Price: request quote
Location: Deutschland
Seller: IMZ Maschinen Vertriebs GmbH

pressure: 4000 kN chamfer lenght: 6000 mm distance between columns: 5500 mm Control: DNC 884 PS/B stroke: 150 mm total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: 7,0x2,5x3,5 m The machine can be used in tandem with No. 1075-6837, and has a cutting length of about 14.5 m Arm length of the holding device: 1200 mm Press table height: 830 mm Operation: Two-hand console 2014 Conversion of the control to DNC 884 PS / B with rotary encoder and linear encoder as a measuring system 2014 Inspection of the mechanical parts and replacement of the defective parts The machine was mainly driven in single-shift operation and has steel plates bent to 5 mm. Machine is ... more

New in: 2002
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

BATTENFELD TM 1300/525 / hours: 31.267 Year of construction: 2002 Injection unit: Screw diameter: 45 mm Shot weight: 289 g Injection pressure: 1659 bar Metering capacity: 318 cc Clamping unit: Clamping force: 130 t Tie bar distance: 470 x 470 mm Size of the clamping plates: 670 x 670 mm Ejector: hydraulic Clamping unit: knee lever Control: Unilog B4 Additional equipment: Hydraulic core pulling x 2 Proportional valve on the injection unit - precise injection Central lubrication system Dimensions: Weight: 4800 kg Length/width/height: 4.65 x 1.43 x 2.09 m Drive: Pump/motor: 18.5 kW Heating power: 14 kW Total power: kW 32.5 Price: On request more

New in: 1987
Price: request quote
Location: Deutschland
Seller: IMZ Maschinen Vertriebs GmbH

pressure: 4000 kN chamfer lenght: 7500 mm distance between columns: 7000 mm Control: DNC 884 PS/B stroke: 150 mm total power requirement: kW weight of the machine ca.: 28 t dimensions of the machine ca.: 8,5x2,5x3,5 m The machine can be used in tandem with No. 1075-6838, and has a cutting length of about 14.5 m Arm length of the holding device: 1200 mm Press table height: 830 mm Operation: Two-hand console 2014 Conversion of the control to DNC 884 PS / B with rotary encoder and linear encoder as a measuring system 2014 Inspection of the mechanical parts and replacement of the defective parts The machine was mainly driven in single-shift operation and has steel plates bent to 5 mm. Machine is ... more

New in: 2014
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

BATTENFELD TM 240/1330 with robot Apex SC950W / hours: 9.125 Construction year: 2014 Injection unit: Screw diameter: 55 mm Shot weight: 594.2 g Injection pressure: 2041 bar Dispensing volume: 653 cc Clamping unit: Clamping force: 240 t Tie bar distance: 570 x 570 mm Size of the clamping plates: 820 x 930 mm Ejector: hydraulic Clamping unit: knee lever Control: Unilog B6P - Control Panel (touch screen) Additional equipment: EUROMAP 67 Robot interface Hydraulic core pulling x 1 Air valve x 2 Control hot-channel x 6 Injection unit cured - bi Central lubrication system Parallel movements 2 x battery with compressed nitrogen (additional charge, which is used for th ... more

New in: 2018
Price: request quote
Location: Werk
Seller: Sperling Werkzeugmaschinen

saw blade diameter: 400 x 50 mm turning speeds: 3000 U/min : 100 x 110 mm : 250 x 85 mm capacity 90 degrees: round: 130 mm : 110 x 110 mm Capacity 45° rectangular: 160 x 70 mm : 115 / mass. 90 mm work height max.: 970 mm total power requirement: 1,5 kW weight of the machine ca.: 380 kg dimensions of the machine ca.: 900 x 1000 x 1480 mm DESCRIPTION Automatic mitre cutting-off machine for Alumininium / pvc and light metals, with Ø400 TCT ascending blade saw. Easy clamping to 450 / 900 / -450 cutting degrees. CHARACTERISTICS THREE PHASE MOTOR 400Ø Tungsten Carbide TCT saw included / 45° / 90°/ -45° / -60° Lockable degrees and intermediate angles Two Pneumatic vertical and horizontal  ... more

New in: 1990
Price: request quote
Location: Land-uk UK Thornton, Hillhouse Business Park
Seller: Euro Rubber Lines

QTY 1 x Pomini VIC1.8-PX1.6 Tandem Lab mixer, Machine number 9912, date 1990, Modern frame design with unitized fabricated steel base, Anti friction roller bearings with floor lubrication, 22kW DC variable speed motor. Rotor speeds 0-230rpm Torque montioring sensors. Siemens PLC control system with S7-300 CPU (combined with original S5). Desktop computer interface. Left hand mixer: Pomini PX1.6 tangential rotor type, Volume 1.6Litre, 2 wing rotors, FY type bronze dust seals, Jacketed chamber for heating or cooling, Hard Chrome plated chamber and rotors, Chamber sides can manually swing open for cleaning/maintenance (by removing 4 bolts on each side), Pneumatic oil injec ... more

New in: 2012
Price: request quote
Location: ab Standort
Seller: Gebr. Engelfried oHG

Number of spindles: 8 St. Working width: 260 mm Working height: 160 mm Length of the planing table: 2000 mm Feed motor: 7 kW Feed speed: 5-30 m/min. total power requirement: kw Dimensions (L/W/H): mm weight of the machine ca.: kg Control: Weinig PowerCom Weinig Powermat 1000 CNC, year 2012 ------------------------------- Executive Summary: ------------------------------- 8 spindles HSK / powerlock large PowerCom controller Grooved Axial and axial axes CNC controlled Detailed description: ------------------------------- Technical specifications: ------------------------------- Working width max. 260 mm Working height max. 160 mm 1. tool holder ------------------------------- First lower tool  ... more

New in: 2003
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Battenfeld TMS 2100-1330 Year of construction: 2003 Injection unit: Screw diameter: 55 mm Displacement: 653 cc Injection pressure: 2041 bar Shot weight: 594 g / PS Clamping unit: Clamping force: 210to. Clear width between columns: 570 x 570 mm tool clamping plate sizes: 840 x 840 mm Ejector: hydraulic Clamping unit: knee lever Control: Unilog B4 Additional equipment: EUROMAP Robot interface Control hot-channel x 12 Central lubrication unit Automatic adjust of the height of the form Proportionelventil on the injection unit injection unit from bi-metal Enrgeisparennde machine - inverter self-closing nozzle. Dimensions: Length/width/height: 7.06 x 1.74 x 2.21 m  ... more

New in: 2005
Price: used machinery auction RESALE 16.000 €
Location: Land-no NO Norway, 4360 Varhaug
Seller: Surplex GmbH

Weight approx.: 5000 kg Dimensions (l x w x h) approx.: 6000 x 2500 x 2500 mm setting measure approx (l x w x h): 8000 x 2500 x 2500 mm Description: -BIESSE Rover XL CNC Machining Center with 2 Operating Units / Spindles- BASIC MACHINES - ROVER SERIES -Rover 24 XL, Numerically controlled machining center, Working fields: Configuration 1-2: X = 6170 mm, Y = 1395 mm, Z = 180 mm Automatic lubrication system. ATS PANEL SUPPORTS FOR ROVER 24 -10 ATS panel supports - 30 sliding supports for vacuum modules - 10 stops - 2 side stops PIECE REFERENCES -Additional work station at 750 mm (655 mm for EPS panel supports) from the back stops, for a machine with 10 panel supports. -2 Additional ... more

New in: 2005
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Angel E-motion 440/180 / Elektrsiche machine Year of construction: 2005 Injection unit: Screw diameter: 40 mm Injection pressure: 1930 bar Dispensing volume: 220 cc Clamping unit: Clamping force: 180 tonnes Tie bar distance: 0 x 0 mm Clamping plate sizes: 970 x 750 mm Ejector: hydraulic Clamping unit: knee lever Control: EC 200 - touch screen Additional equipment: Tie machine Electrically driven machine with Servomotoeren; energy-saving, hochtoruge and quiet Control with hydraulic core pulling Control hot-channel x 24 Injection unit cured - bi Central lubrication system The integrated system for quality control of pressure by Mark Kistler - control of tool pressur ... more

New in: 2011
Price: used machinery auction RESALE 4.900 €
Location: Land-de DE Germany, 82140 Olching
Seller: Surplex GmbH

Weight approx.: 1500 kg Dimensions (l x w x h) approx.: 1700 x 1200 x 1800 mm Description: Steuerung: SIEMENS Max. working diameter: 12 mm Max. working lenght: 135 mm Spindle speed: 400 - 800 rpm/min Spindle hole diameter: 15 mm Spindle center height: 1000 mm Motor power: 2,2 KW Max. drilling diameter: 7 mm Max. threading: M6 mm Equipment and accessories: Cooling: Cooling unit, coolant tank capacity 75 L, Central lubrication, Working light Additional technical Data please have a look at pictures of the Manual! ATTENTION: No CE-Konformity of the machine! Transport dimensiosn: Machine: 1.600 x 1.200 x 1.800 mm, approx. 1.500 kg Cooling unit + Accessoire: 1.200 x 800 x 1.200 mm more

New in: 2000
Price: request quote
Location: Land-pl PL 91212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Demag Ergotech system 3500-840 Year of construction: 2000 Injection unit: Screw diameter: 45 mm Shot weight: 320 g Injection pressure: 2402 bar Dispensing volume: 358 cc Clamping unit: Clamping force: 350 t Tie bar distance: 720 x 650 mm Size of the clamping plates: 1040 x 950 mm Ejector: hydraulic Clamping unit: knee lever Control: NC 4 Additional equipment: EUROMAP Robot interface Hydraulic core pulling x 1 Injection unit made of bimetal Parallel movements Central lubrication system Built-in printer to print out the machine history Auto tool installation height It is possible to change the injection unit for a larger injection unit with screw diameter 50 mm,  ... more

New in: new
Price: request quote
Location: Spanien
Seller: GK Werkzeugmaschinen GmbH

turning diameter:805 mm turning length:3000 mm control:Fanuc 0i TF max. swing over slide:515 mm bed width:425 mm spindle taper:A2-8 spindle speeds:0-1700 1/min. spindle bore:105 mm transmission ratio:2 tailstock quill diameter:96 mm tailstock quill stroke:215 mm taper of tailstock quill:6 MK max. length of work piece:3000 mm rapid traverse x/z:10/10 m/min power requirement:17 kW weight of the machine ca.:7560 kg dimensions of the machine ca.:5530x1800x2230 mm automatic tool changer:8-fach European electric: CNC controller:Fanuc 0i TF CE-design: tools:1 Satz Machine work light: coolant system: automatic lubrication system: electric handwheel: servo spindle motor: Machine semi-cover: : 3 chip  ... more

New in: 2001
Price: request quote
Location: Land-pl PL 91212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

Demag Ergotech system 4200-840 Year of construction: 2001 Injection unit: Screw diameter: 45 mm Shot weight: 320 g Injection pressure: 2402 bar Dispensing volume: 358 cc Clamping unit: Clamping force: 420 t Tie bar distance: 800 x 710 mm Clamping plate sizes: 1200 x 1100 mm Ejector: hydraulic Clamping unit: knee lever Control: NC 4 Additional equipment: Hybrid machine EUROMAP Robot interface Control air valve Hydraulic core pulling x 2 Auto tool installation height Central lubrication system Built-in printer to print out the machine history It is possible to change the injection unit for a larger injection unit with screw diameter 50 mm, 60 mm, 70 mm Dimensi ... more

New in: used
Price: used machinery auction RESALE 60 €
Location: Land-de DE Germany, 66914 Waldmohr
Seller: Surplex GmbH

Weight approx.: 200 kg Dimensions (l x w x h) approx.: 1400 x 800 x 1600 mm Description: With lubrication device for drilling gears, mounted on wheels more

New in: 2006
Price: request quote
Location: Land-pl PL 91212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

HAITIAN HTF 86 X year of build: 2006 injection unit: Screw diameter: 40 mm Shot weight: 165 g Dispensing volume: CC 181 Clamping unit: Clamping force: 86 t Tie bar distance: 360 x 360 mm Size of the clamping plates: 534 x 535 mm Ejector: hydraulic Clamping unit: knee lever Control: KEBA Additional equipment: EUROMAP Robot interface Core move x 2 Hot channel control Central lubrication system Auto tool installation height Dimensions: Weight: 3450 kg Length/width/height: 4.50 x 1.25 x 1.90 m Drive: Pump/motor: 13 kW Heating capacity: 6.2 kW Cylinder heating: 19.2 kW Price: On request more

New in: 1986
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Cylindrical grinding machine, external cylindrical grinding machine, CNC wave grinding machine, CNC cylindrical grinding machine - peak height / width 140 x 1,000 mm -Control, Fabr. Siemens Type 840 D -Abilt spindle -Reitstock, hydr. -Measuring device type Marposs T25 -ca 20x different grinding wheels -Machines lighting -Cabin -Cooling lubricant device -Oil mist suction more

New in: 2006
Price: request quote
Location: Land-pl PL 91212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

HAITIAN HTF 86 X year: 2006 Injection unit: Screw diameter: 40 mm Shot weight: 165 g Dispensing volume: CC 181 Clamping unit: Clamping force: 86 t Tie bar distance: 360 x 360 mm Size of the clamping plates: 534 x 535 mm Ejector: hydraulic Clamping unit: knee lever Control: KEBA Additional equipment: EUROMAP Robot interface Core move x 2 Hot channel control Central lubrication system Auto tool installation height Dimensions: Weight: 3450 kg Length/width/height: 4.50 x 1.25 x 1. 90m Drive: Pump/motor: 13 kW Heating capacity: 6.2 kW Cylinder heating: 19.2 kW Price: On request more

New in: used
Price: 1.650 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Screw pump, oil pump, screw pump, dosing pump, screw pump, low pressure pump, screw pumps -Pump for lubricating oil, fuel oil, vegetable oil, hydraulic oil, glycols, polymers, emulsions -Pump is unused -Manufacturer IMO -Type ACF110N4IRBO -max capacity 1.4 m³ / min -max pressure 16 bar -Motor power KW -Speed 1 / min -Waves diameter 55 mm -Flange DN 200 / DN 150 -1x pumps available -Prize piece -Dimensions 830/400 / H520 mm -Weight 209 kg / piece more

New in: used
Price: request quote
Location: Land-it IT 00198 Rome, Via Alessandria 208
Seller: Alcon SRL

Complete of: Infeed unit with belt – Transport clamp to cutting unit – Pressing device – Three-knife-cutting unit – Cutting tables – Central lubrication more

New in: 1990
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Metal band saw, band saw machine, 2 column guided hydro miter band saw -2 Column-guided hydraulic miter band saw Semiautomatic -1x roller conveyor 1000 mm with stop -1x roller conveyor 2000 mm -1x roller conveyor 1000 mm -Section area: -round 90 ° 400 mm -Flat 90 ° 400 x 725 mm -Square 90 ° 400 mm -round 45 ° 400 mm -Flat 45 ° 400 x 400 mm -Vault opening max. 725 mm -Drive 4 kW -Sägeband speed 17-110 m / min -Schnittdruck regulation hydr. infinitely variable -Coolant system -Minimum lubrication spray device -Dimensions Machine 3300/1750 / H2150 mm -Dimensions Roller conveyor mm -Weight 3000 kg more

New in: 2000
Price: request quote
Location: Land-uk UK Berkswell
Seller: Parkes Machine Tools Ltd

Used Bihler MC42 multislide wire/strip punching and forming machine. Year of mfg 2000. German origin. Bihler P-CNC 400 control. Complete with GSE 4.2 tapping, B1000 welding system, 2 x transformers 70 KVA, Raziol lubrication, various forming slides (radial & linear type) and press station. more

New in: 1977
Price: request quote
Location: Leipzig 4
Seller: WMW AG

pressure: 160 t,stroke: 500 mm,Table dimensions: 700 x 700 mm,die-cushion pressure: 5,5 MP,dayligth: 500 mm,diameter of piston: 320 mm,operating pressure: 200 bar,weight of the machine ca.: 8 t,space requirements of the machine approx.: 1100x1120x3760 BxTx H mm,BGV till 2007 2 machines available. Presses were used together as a line with stockNo. 0700342 and 0700349 All the presses are connected to a central oil pump which supplyes lubricant. price basis as is. without accessories i.D. more

New in: 2012
Price: request quote
Location: Land-de DE
Seller: Sprenger Machinery - René Sprenger

Brand MAN Model 41/480 Euro 5 Type concrete pump Year 2012 first register year 2012-04 Mileage 232000 km Climatisation: No. climatisation Driving cab: Local traffic 43mSX swing P2525 3406 hours New delivery line Eater twin 700 End tube mill High pressure cleaner Central lubrication system and much more at facilities on MAN 41480 TGS 8 x 4 Manual gearbox Baujar 2012 Machine is in good condition and within 14 days available offer and prices are net ex location Reserved, errors or misrepresentations subject to prior sale, no guarantee or warranty, as seen, lying or standing __________________________________________________________________ A reproduction, re-use, publish ... more

New in: 2014
Price: request quote
Location: Nord-Italien
Seller: GK Werkzeugmaschinen GmbH

internal diameter:250 mm grinding depth: mm swing diameter:460 mm workpiece diameter:455 (max.) mm workpiece length - max.:1000 mm table rotating:-4/+8 ° table speeds:0-4000 mm/min max. workpiece weight:80 kg workhead - center taper:5 MK Rotation speed of workhead :0 - 400 1/min workhead motor:4 kw 3-jaw chuck:250 (selbstschließend) mm grinding motor:4 kW coolant pump:2,2 kW Weight approx.:2,4 t machine dimensions:3200 x 2100 xx CNC controller:Siemens 840 D servo motors: autom. sensing device for grinding wheel:Option : linear scales and ballscrew:in allen Achsen grinding wheel dresser: : fully enclosed: : technical documentation in German language: CE-design: signal lamp: face grinding at ... more

New in: 2005
Price: 12.000 €
Location: Land-de DE 97816 Lohr a. Main, Stoltestr. 4
Seller: Mattis Maschinenhandels- u. -verwaltungs GmbH & Co.KG

Engine No. 304017 Year of manufacture 09/2005 Material diameter: 5 mm to 250 mm The machine has separate coolant reservoir - a central lubrication system - chip brush - with dust box - Electr. Connecting a roller conveyor - Simatic S7-200 control - variable blade speed Enter of the length of the section. The machine is calculated the feed (Errors and omissions in the technical data and prices and subject to prior sale!) more

New in: new
Price: request quote
Location: Nord-Italien
Seller: GK Werkzeugmaschinen GmbH

internal diameter:300 mm grinding depth: mm swing diameter:300/350 mm workpiece length - max.:2300 mm table rotating:-2/+6 ° table speeds:0-4000 mm/min max. workpiece weight:400 (fliegend, 150mm von der Spindelnase) kg workhead - center taper:6 MK Rotation speed of workhead :0 - 400 1/min workhead motor:4 kw 3-jaw chuck:250 (selbstschließend) mm grinding motor:11 kW coolant pump:2,2 kW CNC controller:Siemens 840 D oder SPS von Siemens servo motors: autom. sensing device for grinding wheel:Option : linear scales and ballscrew:in allen Achsen grinding wheel dresser: : fully enclosed: : technical documentation in German language: CE-design: signal lamp: face grinding attachement:Durchmesser 1 ... more

New in: used
Price: request quote
Location: Land-de DE 65193 Wiesbaden, Kettelerstr. 5
Seller: TÖRNER CNC Maschinen

CNC bed milling machine CORREA ANAYAK HVM-3800-P built in 2013 HEIDENHAIN iTNC530HSCI Procedures: X: 3,200 mm Y: 1,500 mm Z: 1,500 mm Spindle speed 4,000 rpm Tool magazine with 40 tool positions Automatically indexable milling head, 1 ° b 2.5 ° in A NC rotary table Ã? 1,000 mm x 1,000 mm integrated in the rigid table Maximum table load 5000 kg NC rotary table with tailstock 81355 H / V Ã?500 mm, manual feed Ã?400 mm Max weight 750 kg, with tailstock 1,500 kg M & H touch probe, radio waves Hydralische brake Hydralisches counterweight Automatic lubrication oil and air Automatic central lubrication system VCR Cleartec visor Wheel HR410 Chip convey ... more

New in: new
Price: request quote
Location: Nord-Italien
Seller: GK Werkzeugmaschinen GmbH

internal diameter:250 mm grinding depth: mm swing diameter:455 mm workpiece length - max.:1200 mm table rotating:-4/+8 ° table speeds:0-4000 mm/min max. workpiece weight:80 kg workhead - center taper:5 MK Rotation speed of workhead :0 - 400 1/min workhead motor:4 kw 3-jaw chuck:250 (selbstschließend) mm grinding motor:4 kW coolant pump:2,2 kW Weight approx.:2,4 t machine dimensions:3200 x 2100 mm CNC controller:Siemens 840 D oder SPS von Siemens servo motors: autom. sensing device for grinding wheel:Option : linear scales and ballscrew:in allen Achsen grinding wheel dresser: : fully enclosed: : technical documentation in German language: CE-design: signal lamp: face grinding attachement:Du ... more

New in: 1985
Price: request quote
Location: Land-de DE 63165 Mühlheim am Main, Carl-Zeiss-Str. 8-10
Seller: H.-G. Zach Werkzeugmaschinen GmbH

Type of machine: tool milling machine Manufacturer: Mikron, Model: WF 3 SA, Year of construction: approx. 1985. Condition: very good,. Type of offer: used machine, , Specifications:,. Table: 800 x 450 mm, Paths:. x = 500 mm, y = 500 mm,. z = 380 mm. Spindle speed: 50-2240 rpm,. Spindle retainer: SK 40, Spindle drive: 1.8 / 2.6 kW. Comment:. with 3-axis HEIDENHAIN active digital display,. Coolant system, Central lubrication system, Weight: 1650 kg , The machine is in a very good shape and ready for operation. It can be visited and demonstrated at our location., , We will be pleased if you take an interest in our offer., more

New in: used
Price: request quote
Location: Leipzig 4
Seller: WMW AG

pressure: 20 t,stroke: 400 mm,Table dimensions: 300 x 300 mm,dayligth: 380 mm,weight of the machine ca.: 2 t,space requirements of the machine approx.: 560x380x1775 BxTxH mm,DOCUMENTATION available 4 machines available. Presses were used together as a line with stock No.s 0700342 und 0700353. All the presses are connected to a central oil pump which supplyes lubricant. more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: