twin screw press used for sale

A complete unit is offered.

Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: type BS 430 -Final pressure: max. 15.0 bar -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg

Screw compressor, air compressor, compressed air unit, stationary air compressor -Manufacturer: Mannesmann Demag, screw block from compressor type SP-041 -Screw block: Type EK 103NK -Intake unit: Demag type 10483974 with filter -Dimensions: 580/510/H480 mm -Weight: 65 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, trough screw conveyor -Screw conveyor: is unused and has no trough (see photos) -Execution: stable -Screw length: 1965 mm -Screw diameter: 265 mm -Screw pitch: 130/230 mm -Tube diameter: 140 mm -Body: steel -Screw blades: stainless steel VA -Drawing with the photos -Transport dimensions: 2880/265/H265 mm -Weight: 146 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, trough screw conveyor -Screw conveyor: is unused and has no trough (see photos) -Execution: stable -Screw length: 1965 mm -Screw diameter: 265 mm -Screw pitch: 130/230 mm -Tube diameter: 140 mm -Body: steel -Screw blades: stainless steel VA -Drawing with the photos -Transport dimensions: 2950/265/H265 mm -Weight: 146 kg

Screws, hexagonal screws, flange nuts, hex nuts, collar nuts, solar fasteners, socket head screws -Hexagon head screws/cylinder screws: M 10 stainless steel 330 kg -Hexagon head screws: DIN 933 M10 x 100 300 pieces / M10 x 20 4400 pieces. -Cylinder screws: DIN 912 M8 x 35 6600 pieces / M8 x 30 4200 pieces -Material: A2 stainless steel -Price: complete -Transport dimensions: 1200/800/H200 mm -Total weight: 330 kg

Screw Jack with Translating screw BD-125-L-U-3-440-B-SHM ize 125 Worm set Ratio, Lifting screw thread - Low ratio with Single start Lifting screw Direction – Upright Spindle end - Clevis End Stroke length (mm) – 440 Locked against rotation - Stop Nut SM with protection tube Max capacity kN – 500 (50 tons)

Description: No. 746082 Running performance approx. 25,000 b/h with suction regulator, belt pulley, solenoid valve and thermal sensor Screw element comes from BOGE S 75 and fits other BOGE models Approx. Onsite Dimension. (l x w x h): 600 x 400 x 600 mm, weight approx.: 120 kg

Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel.

Extruder with vacuum vertical prepress LVP-35, gearbox overhauled in 2011, screw wings equipped with carbide. Press equipped with DC motor 60 kW (can be converted to 55 kW three-phase motor at an additional cost). Machine is functionally tested and comes with some spare parts.

nominal force:100 t stroke:320 mm no. of strokes:35 /min distance between columns:360 / 250 mm Distance table/ram, max. stroke up, adjustment up:500 mm table surface area:320 x 450 mm table height over floor:660 mm ram surface:250 x 280 mm spindle diameter:125 mm power capacity:3,0 kW weight:4,5 t Dimensions (WxDxH):2,0 x 1,6 x 3,1 m

Technical review: 2017; Printing capacity: 40 / 50 t; Spindle diameter: 95 mm; width between columns: 650 mm; max. height between table and ram: 440 mm; spindle stroke max.: 345 mm; table surface (width x depth): 650 x 550 mm; drop-down hole in the table: 90 mm; tenon hole in ram: Ø 50 mm; machine color: blue / white / red

Used screw compressor / screw press Manufacturer: H&G Type: DWF V11 Year of construction: 04.00 Specifications: Weight: approx. 1,800 kg Speed: 10 1/min. Operating voltage: 3/N/PE AC 400 V Frequency: 50 Hz Rated current: 22.5 A

Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg

AGEO SP 60/1000 Four-column screw press with hydraulic return stroke Ctgywn3w Year of construction 1998 CE marking Compressive force 60 tons Four management pillars Hydraulic return stroke Clear width between the columns 1000mm Groove table 900x700mm Passage max.415mm Dimensions: LxWxH approx. 1.8x1.5x2.5meters Weight approx. 3000Kg

Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg

pressure: 6 t dayligth: 180 mm spindle diameter: 32 mm throat: 115 mm ram stroke: 90 mm table surface area: 300x270 mm weight of the machine ca.: 70 kg dimensions of the machine ca.: 800 x 1350 mm Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t distance between columns: 425 mm dayligth: 380 mm spindle diameter: 50 mm weight of the machine ca.: 200 kg dimensions of the machine ca.: 1,3 x 0,8 x 2 m Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hand screw press, without flywheel PAGUS Pressing pressure: approx. 20 t Table surface: 650 x 250 mm ram stroke max: 230 mm Distance table plunger: 40 - 270 mm Groove width: 19 / 31 mm Groove depth: 20 mm Hole hole: Ø 60 mm Flywheel arm mount: 6-edge profile, diameter Ø 41 mm used, tested ! Dimensions: 830 x 620 x 1600 mm

Hand screw press Compressive force: probably approx. 6000 kg Table surface: 390 x 250 mm Spindle diameter: Ø 40 mm ram stroke max: 25 mm distance table ram: 55 mm Projection: 100 mm Dimensions: 440 x 390 x 510 mm

Hand screw press, Balance SPM YB-3 Pressure max: 20.000 kg width between stand: 380 mm stroke: 200 mm greatest height: 320 mm table bore: Ø 76 mm Balance diameter: Ø 1450 mm table: 1120 x 1120 mm Dimensions: 1450 x 1450 x 2110 mm

Hand screw press PAGUS ram stroke max: 22 mm Projection: 55 mm spindle diameter: Ø 12 mm female spindle thread: M6 distance table tappet: 43 mm table surface: Ø 30 mm tool holder in table: Ø 12 mm used, tested ! Dimensions: 185 x 70 x 220 mm

Hand screw press PAGUS ram stroke max: 24 mm projection: 125 mm spindle diameter: Ø 12 mm female spindle thread: M6 distance table tappet: 58 mm Table surface: Ø 32 mm Tool holder in table: Ø 17 mm used, tested ! Dimensions: 260 x 120 x 290 mm

Hand screw press PAGUS ram stroke max: 25 mm Projection: 95 mm spindle diameter: Ø 10 mm female spindle thread: M6 distance table-tappet: 40 mm table surface: Ø 40 mm tool holder in table: Ø 12 mm used, tested ! Dimensions: 200 x 80 x 260 mm

Hand screw press PAGUS ram stroke max: 21 mm Projection: 95 mm spindle diameter: Ø 12 mm distance table tappet: 32 mm Table surface: Ø 40 mm tool holder in table: Ø 12 mm used, tested ! Dimensions: 200 x 80 x 260 mm

Hand screw press PAGUS ram stroke max: 17 mm Projection: 140 mm spindle diameter: Ø 11 mm female spindle thread: M6 distance table tappet: 44 mm Table surface: Ø 25 mm tool holder in table: Ø 8 mm used, tested ! Dimensions: 280 x 210 x 300 mm

Hand screw press PAGUS ram stroke max: 50 mm Projection: 60 mm Spindle diameter: Ø 20 mm female spindle thread: M12x1.0 with adapter to male thread M5 distance table ram: 95 mm Table surface: Ø 70 mm Tool holder in the table: Ø 20 mm used, tested ! Dimensions: 270 x 160 x 390 mm

Hand screw press PGH METALL ram stroke max: 13 mm Projection: 85 mm spindle diameter: Ø 12 mm female spindle thread: M6 x 1.25, depth: 20 mm distance table ram: 36 mm Table surface: Ø 40 mm Tool holder in the table: Ø 12 mm Base plate for clamping in a vice: 117 x 99 x 30 mm used, tested ! Dimensions: 260 x 120 x 290 mm

Hand screw press, screw press, rotary mandrel press, mandrel press PAGUS Type: M56 stroke: 27 mm Projection: 60 mm stroke: max. 59 mm ( after removing the limiting sleeve ) distance ( table - tool holder ): 90 mm table diameter: Ø 65 mm, central bore: Ø 20 mm spindle diameter: Ø 20 mm, Tool holder: M12 x 1.75, length: 8 mm used, tested ! Dimensions ( ready for use ): 290 x 160 x 380 mm

Hand screw press, Balance METALWAG YB-1 Pressure max: 10,000 kg width between stand: 320 mm stroke: 120 mm Balance diameter: Ø 1200 mm table: 300 x 300 mm Press stamp is missing used, checked ! Dimensions: 1200 x 1200 x 1700 mm

Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Nominal force, kN 1600 Slider stroke, mm 320 Distance between table and slide, mm 320 Distance between table and slide, mm 320 Main drive motor power kW 16 Table size width / length mm 580/650 Machine dimensions Length Width Height (mm) 2560_2020_3840 Weight kg 11000

Hand screw press, mandrel press, screw press, hand screw press, printing press, balance printing press, 2-column press, column screw press -Manufacturer: Ageo, manual column screw press type 28/510N with solid base frame -Printing capacity: max. 28 tons -Stroke: 315mm -Intermediate size: 510 mm -Table size: 400 x 510 mm, groove width 22 mm -Pitch: 48 mm/rev. -Dimensions: Ø 1600 x H2040 mm -Total weight: 1024 kg

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Description: lichte Weite zwischen den Säulen ca. 500 mm Neigung vor der Drehung ca. 48 km , Druckkapazität 28 Tonnen table surface area l x w : 500x400 mm, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,600 x 1,900 mm, weight approx.: 350 kg

nominal force:315 t stroke:300 mm no. of strokes:36 /min distance between columns:540 mm distance table/ram, max. stroke up, adjustment up:750 mm table surface area:530 x 630 mm blow die to die:630 t Allowed max. force:500 t ram surface:450 x 560 mm spindle diameter:180 mm power capacity:18,0 kW weight:13,0 t Dimensions (WxDxH):2,5 x 2,0 x 4,0 m

nominal force:160 t stroke:140 mm no. of strokes:85 /min distance between columns:400 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:400 x 450 mm table height over floor:800 mm Allowed max. force:230 t ram surface:400 x 320 mm spindle diameter:125 mm power requirement:7,35 kW weight:5,0 t dimensions (WxDxH):1,7 x 1,2 x 2,9 m

pressure:400 t stroke:280 mm no. of strokes:56 Hub/min distance table/ram, max. stroke up, adjustment up:680 mm table surface area:560 x 750 mm allowed max. force:600 t blow die to die:800 t spindle diameter:200 mm ram surface:560 x 560 mm height over floor:4,1 m power requirement:37,0 kW weight:12,0 t dimensions (WxDxH):2,2 x 2,0 x 4,25 m

Permanently permissible maximum force: 320 ton Screw diameter: 140 mm Stroke: 190 - 320 mm Number of strokes: 30 s.p.m. Daylight: 350 mm Table surface area : 600 x 550 mm Slide area: 530 x 500 mm Free frontal opening L-R: 610 mm Free lateral opening F-B: 510 mm Table height over floor: 670 mm Required power: 22 kW Height over floor approx.: 3650 mm Dimensions L x W x H: 1400 x 1200 x 3650 mm Weight of machine approx.: 6,2 ton

Permanently permissible maximum force: 400 ton Screw diameter: 140 mm Stroke: 190 - 320 mm Number of strokes: 30 s.p.m. Daylight: 350 mm Table surface area : 600 x 550 mm Slide area: 530 x 500 mm Free frontal opening L-R: 610 mm Free lateral opening F-B: 510 mm Table height over floor: 670 mm Required power: 22 kW Height over floor approx.: 3650 mm Dimensions L x W x H: 1400 x 1200 x 3650 mm Weight of machine approx.: 6,5 ton

General SKU235U236 LocationBarneveld MakeIlchmann TypeDTSF 2x200x1.857mm Mach.No.CRO0349 Main Features Motor3 KW Length1857 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4571 (316Ti) Horizontal conveyor screwcheck Double shaftcheck Diameterdia. 200 mm (2x) Length1875 mm Between inlet and outlet1460 mm Shaft diameter200 mm Pitch200 mm Inlet350x350 mm Outlet385x220 mm Motor3 kW, 220-230/380-400 Volt Screw speed31 rpm Information Year of construction2014 Total height0,48 m CEcheck Floorspace3,33x0,5 m Weight650 kgHorizontal screw conveyorsIlchmannConveying systems > Horizontal screw conveyorsBrand > Ilchmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...

General SKU292T670 LocationBarneveld MakeVan Tongeren kennemer BV TypeZ43430 Mach.No.T4404 Main Features Motor3 KW Length7000 mm Inlet diameter430 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304), Stainless steel 1.4401 (316) Horizontal conveyor screwcheck Tube-typecheck Diameter420 mm Length7000 mm Shaft diameter260 mm Pitch200 mm Inletdia. 430 mm Outletdia. 221 mm Max. temperature100 °C Motor3 kW 219-241/380-420 Volt (Ex) Height between in- and outlet5890 mm Information Year of construction2015 CEcheck Floorspace0,7x8,9 m Total height0,9 m ATEX compatiblecheck Extra Specificationsoil sealed vacuum pumpHorizontal screw conveyorsVan TongerenConveying systems > Horizontal screw conveyorsBrand > Van Tongeren What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready f ...

General SKU232U228 LocationBarneveld Makeunknown: missing type plate Main Features Motor0.37 KW Length4500 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Trough-typecheck Diameter350 mm Length4500 mm Between inlet and outlet4400 mm Shaft diameter130 mm Pitch93 - 300 mm Inlet160x350 mm Outlet350x280 mm Motor0,37 kW 220-240/380-415 Volt Screw speed9,2 rpm Outlet height1430 mm Height between in- and outlet1030 mm Information Floorspace5,2x1,1 m Total height1,9 m Weight550 kg Extra SpecificationsCapacity: 4256 Ltr/hHorizontal screw conveyors-Conveying systems > Horizontal screw conveyorsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...

General SKU292T672 LocationBarneveld MakeVan Tongeren kennemer Mach.No.Z43752 Main Features Motor1.1 KW Length1900 mm Inlet diameter175 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screwcheck Tube-typecheck Diameter360 mm Length1900 mm Shaft diameter170 mm Pitch255 mm Inletdia. 175 mm (2x) Outletdia. 140 mm Motor1,1 kW 219-241/380-420 Volt With coverscheck Information Year of construction2015 Total height0,6 m CEcheck Floorspace3,2x0,55 mHorizontal screw conveyorsVan TongerenConveying systems > Horizontal screw conveyorsBrand > Van Tongeren What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

screw for PE and PP much more screws (some are new) available