We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
124,112 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Serial No.: 1704 Punching capacity: Ø 28 x 16 Available with special tools: Ø 100 x 4 Year of construction: 1997 Country of origin: Italy
used
- Paper from 80 g/m2, cardboard up to 1.400 g/m2 - Corrugated board up to 4 mm thickness - Sheet format max. 750×1050 mm - Sheet format min. 350 x 400 mm - Punching pressure:300 t / 3.0 MN - Output max. 7.500 sheets/hour - Touch screen panel - Punching, creasing, perforating, embossing
used
unknow GE.570205.0002.00, part of the set-
used
Main Rack
used
BARCO HULPFUNCTIE 16 DIG OUTP
used
BARCO FLOPamp;KBRD INTF MNC95
used
Key data: 55 t
Specifications Model No.: PM-55T Serial No.: 94713 Punching pressure max: 55 tons Punching capacity max.: Ø 22 x 18 mm Diameter x thickness: Ø 50 x 8 mm Engine power (kW): 3.7 Working height: 1050 mm Projection: 310 mm Table size (LxW): 700 x 500 mm Weight: 1620 kg Year of manufacture: 9/1999 Country of origin:Taiwan
used
max. format 26 x 38 cm Built in 1980 Price on request. We deliver and install worldwide!
used
Baier Lifting Punch for labels & die-cut parts - Support width: 25mm to 250mm - Year of construction: 1997 - Embossing force: 100 KN - Heating: 2200 W each - Electricity: 400 V / 50Hz Very well maintained facility The system is technically and visually in good condition
used
Key data: 75 t, 80 mm, 250 1/min
Pressing force: 75t Table: 650 x 560 mm Plunger area: 500 x 300 mm Stroke rate: 50-250 stroke/min Lifting height: 8-80 mm max. installation height: 400 mm Passage between the side stands: 300 mm Feeder: Manufacturer: GSW Type: WV32/80 Band width: max. 320mm Tape thickness: max. 3.5mm Roller diameter: 80mm
used
Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Stroke release via foot switch Assortment of tools is included in the price
used
Iberica JR-105 F Automatic Die Cutting machine Age: 1997 Max. sheet size: 750 x 1050 mm Min. sheet size: 350 x 400 mm Max. Speed: 9.000 impr./hour Max. pressure: 300 tm. Equipment: Varioplan System Automatic Feeder Feeding Table 2x Side Lays pushing and pulling system 4x Front Lays Control Panel The Cutting Unit Stripping Unit with chases and tools Non-Stop delivery Machine is elevated Machine comes with Holder Chases and Cutting Plates
used
Swivel arm punch Sandt, pressure capacity 25 tons
used
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Peddinghaus, profile steel scissors 5-way combined model 210 SUPER 11 -Pressure force: 40 tons -Drive power: 3/2.2 kW 2800/1400 rpm -Applications: punching, shearing, cutting, notching -Footswitch: 2 -Length stop: Electric contact stop, adjustable up to approx. 1 m -Accessories: incl. various. Stamps and dies see photos -Dimensions: 1620/1350/H1740 mm -Weight: 1323 kg
used
Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Stroke triggering via foot switch Large support table WBL Assortment of tools is included in the price
used
Kama DigitalCut 58 automatic punching machine with hot foil stamping The machine has faults. Year of manufacture 2014 Art.Nr. PS5992
used
Roller feed KAISER ZR 12 Belt width - 120 mm Feed length 100 mm Feed angle - adjustable - 90 - 180 degrees Tech. Condition - good, complete With pneumatics. Spare parts Btto 250 kg
used
IRON WORKER (Universal Punching Shear) (Punching capacity) Punching capacity 70 Tons Diameter 28 x 20mm Thickness (Diameter 28 x 20mm thickness) Max cutting thickness in plate 20mm (Max cutting thickness in plate 20mm) Angle cutting up to 130x130x130x13 at 90°. Angle cutting up to 70x70x7 at 45°.
used
Key data: 30 t, 100 1/min
Specifications Pressing force 30 t Stroke rate 100 – 600 mm Plunger stroke adjustable up to 40 mm Installation height 300 mm with built-in clamping plate
used
Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 70 mm -Dimensions: 220/320/H115 mm -Weight: 32 kg
used
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Peddinghaus, profile steel scissors 5-fold combined model 210/13 on a rotating machine base -Pressure force: 70 tons -Drive power: 4/5 kW 1450/2900 rpm -Throat: 610 mm -Applications: punching, shearing, cutting, notching -Accessories: incl. various. Stamps and dies see photos -Dimensions: 1865/1205/H1990 mm -Weight: 3580 kg
used
Offer 23481 Specifications: - Printing capacity 30 t - max. sheet thickness 6 mm - Max. punching diameter 105 mm - Stroke 42 mm - Projection 700 mm - Maximum stroke rate 200 H/min - Table dimensions W 1500 x D 1100 mm - Table height 1000 mm - Drive 400 V / 4 kW - Space requirement approx. W 1600 x H 2000 x D 2200 mm - Weight approx. 3400 kg - With: - Bulletin table with adjustable stops - Quick-change punch device - Foot switches; - Emergency stop button - Various punches + dies in separate workbench
used
Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool scraper -Holes: Ø 13 mm -Threaded hole: M15 -Dimensions: 150/100/55 mm -Weight: 1.8 kg
used
Druckplattenstanze - Plate Punch Bacher 2032 Serial-No. 12544r Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Plattenstanze - Plate Punch Bacher 2032 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Kalenderstanze - Calender Punch Machine Renz Super 520 Year 1967 - Serial-No. 3659 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Universelle Stanzmaschine - Punching machine PRINTEX 75261D1 Serial-No. 75261D1- Fuer Platiktueten - Folien - Papier - Karton For Platic Bags - Foils - Paper - Karton 2 Hand-Ausloesung 2 Hand release -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Universelle Stanzmaschine - Punching machine PRINTEX 10097 Serial-No. 10097- -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Stanzautomat / Punching Machine Plastograph PZ 599 Baujahr / Year 1998 Arbeitsbreite / Working width 120 - 600mm Papierlaenge / Paper length 100 - 550mm Arbeitsbreite min. 95mm - max. 600mm Hubzahl einstellbar / number of Strokes adjustable 30 - 120/min. Flachstapelanleger / Flat Pile Feeder 5 Stanz-Formen / 5 Punching Tools: Types Wire-O 2:1 / 3:1 - Plastik-Effekt / 3:1 4x4mm / 3:1 4x6mm Werkzeug 4x4mm mit Daumenstanzung / Tool 4x4mm with calender hole punch Auslage Ruettler / Delivery Jogger Panel Operation and Controls Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Universelle Stanzmaschine - Universal Punching machine SKAG SP347 Serial-No. SP347 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Universelle Stanzmaschine - Punching machine Masfeld ZEL 1903 Serial-No. 1903 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Universelle Stanzmaschine - Punching machine Krause 101073 Serial-No. 101073 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Universelle Stanzmaschine - Punching machine Saechische 32214 Serial-No. 32214 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Vollautomatische Hochleisungsstanze - Fully Automatic Punching System Kugler 340-2R Baujahr / Year 1998 - Serial-No. 1941-340-2R Arbeitsbreite / Working width max. 340mm Format / Sizes min. 120 x 105mm Format / Sizes max. 340 x 340mm Stanzstaerke / Punching thickness max. 3mm Mechanische Taktleistung pro Minute / Mechanical cycles per minute 80-100 Cycles Anlegesystem fuer kontinuierliches Arbeiten / Paper feeding for continuous running Kastenauslage mit Ruettler / Paper output with Jogger Inkl. Handbuecher / Incl. Manuals Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Schlitzmaschine / Slot machine Krause-Y-32-UM-2-69 Schlitztiefe / slot depth max. 32cm Normal Schlitzbreite / Normal slot width 3mm Hub des Druckstueckes / stroke of the pressure piece ca. 30mm Stanzhuebe / punch strokes per minute ca. 84 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Eckenausstanz- und Schlitzmaschine / Corner Punching and Slot machine Stroebel ES-SM Schlitztiefe / Slot depth 220mm Hub 30mm Eckenausstosstiefe / corner ejection depth 220mm Kraftbedarf / power requirements 1PS Gewicht / Weight ca. 300Kg -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Kalenderstanze - Perfoartion- & Nutmaschine / Calender Punch - Perforiertion - Creasing Machine W. Kroll Gartenberg K80 Serial-No. 63511 Arbeitsbreite / Working width max. 800mm Kalenderstanze 3:1 4x4mm mit Daumenlochung Calender Punch 3:1 4x4mm with thumb cut calendar punch Nut- und Perforierwerkzeug / Creasing and Perforation tools Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Druckplattenstanze - Plate Punch Heidelberg NELA AS Stanze 41118 Year 1996 - Serial-No. 1826/24 for GTO52, SM52.. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Plattenstanze - Plate Punch Heidelberg NELA AS Stanze 41118 Year 1996 - Serial-No. 1349/05 for GTO52, SM52.. -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Eckenausstanz- und Schlitzmaschine / Corner Punching and Slot machine Krause ES-SM Schlitztiefe / Slot depth 220mm Hub 30mm Eckenausstosstiefe / corner ejection depth 220mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Arbeitsbreite / Working width 550mm Stanzwerkzeug 4x4 3:1 Daumenloch fuer KUGLER-WOMAKO ProPunch 50-110 Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Druckplattenstanze - Plate Punch Bacher RP22 Serial-No. 2646 For Heidelberg GTO -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
More details upon request
used
Platen Size: 114x165cm, Format: 106x157cm, Speed: 800~1000, Pressure: 380 Ton, Weight: 12000 KG
used
Platen Size: 114x165cm, Format: 106x157cm, Speed: 800~1000, Pressure: 380 Ton, Weight: 12000 KG
used
Rebuit in 2019, Format: Min. 300x300 mm, Max. 1000x1420 mm, Suitable For Waves: B-C-E-EB-BC, WKZ Knife 28.8 mm x 1.05 mm Thickness, Single Strock, Timed Operation, Continuous Operation
used
Movement Specifications: X-Axis Movement: 4000 mm after reposition Y-Axis Movement: 1270 mm Plate Size: Maximum Y plate size: 1500 mm Technical Data: Embossing Force: 300 kN Max. Plate Thickness: Steel: 5 mm Stainless Steel: 2 mm Tooling: Number of Index: 2 Number of Stations: 34 Max. Material Thickness: Steel: 5 mm Stainless Steel: 2 mm Machine Dimensions: Width: 4250 mm Depth: 5065 mm Height: 2132 mm Machine Weight:22000 kg
used
Format: Max. 740x540mm, Min. 279x210mm, Product Format: 720x520mm, Thickness of Product: 1,8mm, Sheet Side needs for Gripper max. 10mm, Carton Thickness: 100-1500 g/m2
used
Brand New / Unused, With Auto Feeder