turn mill used for sale

Nominal Turning Envelope Faceplate Diameter 4,000 mm Machining Diameter 4,250 mm Machining Heights 2,000 mm Work Piece Weight 20,000 kg X-Axis Ram Carriage From -300 mm To 2,850 mm W-Axis Elevating CrossRail 1.800 mm Z-Axis Ram 1,350 mm WorkTable Diameter 4,000 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 125,000 Nm WorkTable Milling Speed 0.02 to 1.5 rpm Milling Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm 2XRam Size Turning Milling 250X250 mm RAM cross section Tool shank size: ISO 50 Ram Spindle Speed 0 to 3,000 rpm Power Continuous S1 37 kW Torque Continuous S1 2.000 Nm Tool Storage And Interchange Number Of Tool Magazines one ATC for 12 turning and/or milling toolholder Tool Storage 12 X2 Maximum Singular Tool Weight 50 kg Maximum tool long 600 mm X and Z axes thrust Continuous S1 50,000 N X And Z-Axes ...

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Key data: 250 mm, 1000 mm, 380 mm

Hamlet of Commodor AC (Constant cutting speed) Year of construction 2004 Machine no. 3634 Circumferential diameter over bed 380mm Circulation diameter over face carriage 190mm Nominal power 5.5kW Spindle speeds 13-2000 rpm Spindle passage 56mm Center width 1000mm Tailstock MK4 Feed force 10kN Accessories/Equipment: - Three-jaw lathe chuck 200mm - Swivel jaws stepped inside and outside - Multifix B base holder incl. 2 tool holders - Coolant device - 3 axis digital display (hamlet) - Constant cutting speed -Operating instructions - Fixed and rotating bezel - Electrically locked chuck guard - Emergency stop - Multiple bed stops The machine has been technically tested and is in very good condition. The geometry was also checked and found to be very good (measured by the flat web layout) Reversal clearance face carriage 0.15mm Backlash upper slid ...

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Turning length (max.) 1000 mm Circulation diameter (max.) 400 mm Turning diameter over bed 410 mm Turning diameter over slide 280 mm Center width 1000 mm X-axis 250 mm Z-axis 620 mm Number of tools 12 Driven tool stations 12 Spindle speeds 4000 rpm Spindle motor power 26.5 kW Tailstock Yes Bar loader No ------------------- Weight 7500 kg

Key data: 570 mm, 1000 mm

Weiler E50/1 - CNC lathe - 4-jaw face plate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 5 sets of soft top jaws - fixed bezel - Moving center punch tip MK5 - Mulifix B quick-change holder incl. 10 attachments - Switch-on time 32582 h - Built in 1997 - incl. operating instructions and technical documentation Specification Workspace: - Center width: 1000 mm - Center height: 280 mm - Circulation diameter over bed: 570 mm - Circulation diameter via face slide: 340 mm - Circulation diameter in the recess: 600 mm - Bed width: 350 mm - Sliding distance of the face slider: 340 mm - Displacement of the upper support: 140 mm - Slide length: 700 mm - Slide width: 220 mm - Bed slide guide length: 560 mm - Turning chisel cross-section (height/width): 32 x 25 mm Fulcrum shaft: - Spindle head according to DIN 55027: Gr 8  ...

Stack turner Hotung Mini ET; good condition; cleaned and tested; Format 950x660mm; Load capacity 750kg; Max. Stack height 1210mm. Pile turner Hotung Mini ET; good condition; cleaned and checked; Format 950x660mm; lifing capacity 750kg; max.pile hight 1210mm.

CNC SPINNING LATHE MANUFACTURER: M+M MODEL: HF450TT/2S SERIAL NUMBER: 26-2453-00 YEAR: 2000 CONTROL MANUFACTURER AND MODEL: Tracktronic Z-AXIS CENTER HEIGHT: 419mm DISTANCE BETWEEN CENTERS: 1200mm Z -AXIS TOOLING ADAPTER: DIN 55027/ Size 15 Z-AXIS DRIVE POWER: 80kW Z -AXIS DRIVE ZF REDUCTION RATE: 1:4 Z-AXIS DRIVE SPEED: 0-1000 RPM step less variable X - SLIDE TRAVEL: 500mm X - SLIDE FORCE: 100kN X - SLIDE VELOCITY: 400mm/min Y - SLIDE TRAVEL: 275mm Y - SLIDE FORCE: 100kN Y - SLIDE VELOCITY: 400mm/min TAILSTOCK TRAVEL: 600mm TAILSTOCK CLAMPING FORCE: 80kN EJECTOR TRAVEL: 450mm COOLANT: yes POWER 3PHASE / 50-60 Hz / 200 - 500 Volts: 3PH/60Hz/480V existing SPECIAL FEATURES OR ADDITIONAL ITEMS: POWER RATING 204 HP (152 Kw), CONTROL VOLTAGE 110VOLT / 24 VOLT DC MACHINE WEIGHT: 22000 kg CONDITION: EXCELLENT - VERY LIMITED USE

PRECISION HARD TURNING : AN ECONOMICAL ALTERNATIVE TO GRINDING

REM SC 53 Vertical Turning Lathe with Fanuc CNC Control. Technical Data: - Double Column / Double Heads lathe - Max. swing diameter: 5300mm - Max. turning height: 2270mm - Table diameter: 4700 mm - Load capacity: 25000 kg

Inv. Num. : 7468 Type: SL-253BMC/500 Producer: DMG MORI SEIKI Created: 2000 Parameters: Control System: Fanuc MSX-501III Duty cycle: 58953 h Hours: 4810 h Maximum turning length: 485 mm Maximum turning diameter over bed: 254 mm Maximum feed speed axis X: 1260 mm/min Maximum feed speed axis Z: 1260 mm/min Minimum main spindle speed: 35 1/min Maximum spindle speed: 3500 1/min Number of tools: 12 pieces Number of axle: 3 Axis X: 235 mm Z axis: 495 mm Rapid traverse of the X and Z axes: 18000/24000 mm/min Total power requirement: 33.6 kW Length: 2405 mm Width: 1760 mm Height: 1890 mm Weight: 4600 kg Equipment: Driven Tools (X/Z) Kitagawa BB210 Chuck 2018: General overhaul of the control system

Key data: 530 mm, 500 mm, 4000 1/min

Machine Details Stock-No. 1105-04005 Type of machine CNC Lathe Make COLCHESTER Type TORNADO 300 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 530 mm turning length 500 mm control FANUC OT total power requirement 22 kW weight of the machine approx. 3.3 t Additional information GOOD MACHINE CNC CONTROL FANUC OT Cuck Taikstock VDI 40 Turret 12 P Chip Convoyer echnical information Swing over bed 530 mm Swing over cross-slide 330 mm Distance centre tot centre 500 mm Max longitudinal travel Z-axis 20 m/min Max cross travel X-axis 10 m/min Spindle cone A2-8 Dia of spindle bore 90.5 mm Power on the spindle 22 kW Number of speeds 4000 rpm Command Fanuc Total power needed 53 kVa Length 3500 mm Wid ...

Machine Type: CNC Lathe Manufacturer: EMCO Model: EMCOTURN 342 Year of construction: 1993 Condition: excellent Offer Type: Used Machine Specifications: Control: Siemens Sinumerik 810 T Working size: Circulation Ø above bed 340 mm, Circulation over face carriage 158 mm, Spindle passage 53 mm, Passage in drawpipe 42 mm Travel range: Carriage travel longitudinal (z) 300 mm Speed range: 0 – 6000 rpm. Propulsion: 9 / 15 kW Remark: Only 5791 switch-on hours! This machine has never been used for metal processing, only fine wood for instrument making. Sauter 8-speed disc turret VDI 30, pneumatically adjustable tailstock MK3 with hydraulic quill, automatic 160 mm Forkardt three-jaw power chuck, 8 tool holders with tools Weight: 2400 kg The machine is in excellent condition and ready for immediate use and can be viewed and demonstrated by us. We would be p ...

This 9-axis STAR SR-32J type N swiss type turning machine was manufactured in 2018. It offers a maximum machining diameter of 32 mm, with spindle revolutions up to 7000 rpm and a spindle motor power of 7.5/3.7 kW. Key features include a counter spindle with a maximum grip and pass diameter of 32 mm and a rapid axes advance of 24 m/min. The machine also comes equipped with a bar feeder. Contact us for more information about this swiss type turning machine.

Key data: 420 mm, 1500 mm, 210 mm

well-preserved, used lathe Ramo a42 Built in 1987 Rapid traverse for longitudinal and flat Foot brake Circumferential diameter over bed 420 mm Center width 1500 mm Speed range 25-2000 rpm Center height 120 mm Spindle bore 80 mm Quick-change bracket Multifix Coolant device with chip tray Manual Can be tested under power Prices do not include VAT (domestic). The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved. Mechanische Werkstätte Höbbelmann GmbH Niederkasseler Str. 3a 51147 Cologne Phone: 02203/83584 eMail: hoebbelmannt-online.de

Machine Details Warehouse number 1105-03604 Machine type CNC lathe GILDEMEISTER/gratziano brand Type GP 50 Year of construction 2000 Control type CNC Control FANUC 18 I Storage location FRANCE Country of origin Germany Delivery time by arrangement Freight base from location Technical details Rod diameter 50 mm Chuck diameter 150 mm Turning length 500 mm Speed 6000/5000 rpm Indexing per C-axis, 0.001° degrees Tapping spindle yes/yes Rod diameter 50 mm Speed 5000 rpm Indexing per C-axis, 0.001° degrees Turret head (x-fold) 2x 12-speed VDI 30 Driven tool stations 2x 12 Control FANUC 18 I Coolant emulsion Total power requirement 45 kW Machine weight approx. 6 t Space requirement approx. 4.8 x 2.2 x 2 (+Irco) m Chip conveyor Bürener Maschinenfabrik Addition Energized and ready to demonstrate ya Accessories Tool holder 10 rigid, 3 driven pieces / off Part ...

Machine Details Stock-No. 1105-03607 Type of machine CNC Turning and Milling Center Make MORI SEIKI Type SL 150 SMC Year of manufacture 1997 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight basis ex stock Technical details turning diameter 420 mm turning length 560 mm control fanuc 16 T swing dia. 455 mm rapid power traverse in X-and Z direction 18/24 m/min Travel x/z 220 / 520 mm bar material dia. 45 mm spindle drive 11 / 7.5 kW Spindle RPM 50 - 5000 U/min Spindle Torque 143 Nm spindle nose JIS A2-5 Turret positions 12 supspindel wiht 3 jaw chuck sup spindle Travel 450 mm total power requirement 25 kW Additional information WHIT FANUC 16 T CONTROL SUP SPINDLE C AXIS LIVE TOOLS X 5 PARTS CATCHER COLLECT CUCK OFF MAIN SPINDLE AND 3 JAW CHUCK OFF SUP SPINDLE - coolant equipment SHIP CONVEYOR

table diameter: 350 mm table load: 100 / 50 Kg swivelling range: 0 - 90 manuell Grad turning speeds: 0,5 - 5,0 U/min spindle bore: 30 mm Torque: 75 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with - Footswitch - tilt over winch - Speed continuously adjustable - 500 amps welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers

turning diameter:200 mm swing diameter:260 mm turning height:60 mm

turning diameter:175 mm turning height:70 mm chucking diameter:175 mm

Lathe with 4 tools only for 3-cylinder crank shaft

Available from 01.08.2024

Type: Stanko 1516 Max workpiece height: 1000 mm Vertical caliper max horizontal travel: 950 mm max vertical travel: 700 mm Horizontal caliper max horizontal travel: 630 mm max vertical travel: 1000 mm Crossbar max travel: 660 mm Chuck dia.: 1400 mm Max turningdia -- passage: 1600 mm Power on the spindle: 30 kW Number of speeds: 5 > 2 Long : 3170 mm Wide: 3030 mm Height: 4100 mm Weight: 20 ton

Type: Stanko 1512 Max workpiece height: 1000 mm Vertical caliper max horizontal travel: 775 mm max vertical travel: 700 mm Horizontal caliper max horizontal travel: 630 mm max vertical travel: 1000 mm Crossbar max travel: 660 mm Chuck dia.: 1120 mm Max turningdia -- passage: 1250 mm Power on the spindle: 30 kW Number of speeds: 5 > 250 rpm Long : 2750 mm Wide: 2975 mm Height: 4100 mm Weight: 16,5 ton

weight max. in kg:3000 kg weight:330 kg Dimensions (L/W/H):800x320x430 mm

weight max.:ca. 30 t gear diameter:320 mm weight of the machine ca.:3 x 950 kg dimensions of the machine ca.:3 x 2020 x 870 x 1100 mm

Codice: 0222 - AI

Conventional Vertical Lathe UMARO SC 53 faceplate diam - 4700mm max turning - 5300mm max height of workpiece - 2270mm max. workpiece weight - 25T

Vertical Turning Lathe EMSIL HVTL 60/80. faceplate diam - 6000 mm max turning - 12000 mm max height of workpiece - 6500 mm max. workpiece weight - 100 tons With C-axis

Vertical Lathe EMSIL VTL 60/63. faceplate diam - 6000 mm max turning - 6300 mm max height of workpiece - 3500 mm max. workpiece weight - 150 tons With C-axis

MAIN TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.300 2. Min. machining diameter mm 200 3. Max. height of the part to be machined mm 2.000 4. Max. load on the table to 18 5. Table diameter mm 3.000 6. Table speed range rpm 1 ÷ 100 7. Main AC motor kW 100 8. Vertical stroke of the cross rail mm 1.500 9. Cross rail feed mm/min 400 10. Driving motors kW 7.5 11. Ram vertical stroke (Z axis) mm 1.250 12. Ram cross section mm x mm 225x225 13. Horizontal stroke (X axe) mm 1.850 14. Feed range (X and Z axis) mm/min 1 ÷ 6000 15. Rapid traverse (X and Z axis) mm/min 10.000 16. Feed motors torque (X and Z axes) Nm 22 CNC Equipment 1. Equipment type Fanuc 18iTb Overall Dimensions 1. Floor space m 7.1x 6 2. Max. height m 6.3 3. Machine weight (excluding special accessories) to 54

I. Working capacity -Faceplate diameter 2000 mm -Workpiece max. diameter 2200 mm -Workpiece max. height: -under the cross rail 1850 mm -Workpiece max. weight 20 tons II. Movable cross rail : - Stroke on the column 1600 mm - Rapid moving speed 400 mm/min - Slow moving speed 10 mm/min III. Faceplate main drive in the turning mode. -Main drive motor power 60 kW -Faceplate speed range 250 rev/min IV. Working support: -Ram stroke (Z axis) 1500mm -Ram section 250x250 mm -Ram/taper ISO 50 -Tool magazine, tool number 16 (left tool magazine with milling tools and right tool magazine with turning tools or mixed) -Milling shaft drive motor power 37 kW -One tool holder max. Weight 30-70 Kg -Milling spindle speed 1 - 2000 rev/min V. Feeds -X, Z axes working feeds 1 – 6.000 mm -C – axis feeds (faceplate-milling mode) 0,001 + 2, 7 rev /min -Rapid feeds 10.000 mm/min  ...

Main data Direct main drive -maximum diameter to be processed mm. 2630 -plate diameter mm. 2500 -plat speed rpm. 0.1-60 -vertical stroke of the left HEAD Z1 mm 1,100 -vertical stroke of the right HEAD turret Z2 mm 570 -working speed X1-sled left mm./min. 1-6000 - working feed rate X2-right sledge mm./min. 1-6000 - working feedrate Z1 - left slide mm./min. 1-6000 - working feed speed Z2-right slide mm./min. 1-6000 - fast forward speed - X1, X2, Z1 and Z2 mm./min. 8,000 - traverse travel speed mm / min 400 -main drive motor - turning Fanuc 100 kW power Nominal speed rpm 4000 - axle drive motors -Fanuc: Nominal torque Nm 22 Nominal speed rpm. 4000 Bil0rcq8 CNC FANUC 18 itB 4.PRECISION The positioning accuracy is: Positioning accuracy -axis X1,2 and Z1,2 mm 0,040 / 1000 Positioning repeatability -axis X1.2 and Z1.2 mm 0.025

3 m VTL 33 CNC 2 heads and magazines - REM SC 33 CNC 2MS Technical data: 1. Capacities - Maximum turning diameter with either Vertical Head 3300 mm - Maximum machining height under Cross Rail, at least 2000 mm - Maximum weight of the workpiece 20 tons 2. Table - Table diameter 3000 mm - Speed (inf. Variable) 1- 110 RPM - Main motor drive (AC) 100 KW - 4 jaw chuck with reversible jaws 3. Vertical Heads - Straight Ram vertical travel (250X250 mm cross section) 1300 mm - Horizontal and Vertical travel by means of 10 mm pitch ball screws 4. Cross Rail - Vertical Travel 2000 mm - Cross Rail elevating motor 7.5 KW AC 5. Feeds - Feed ranges 0.1 – 5 mm/rev - Rapid traverse feed 8000 mm/min 6. Overall Sizes Miwie7iv - Dimensions (approx.) L x W x H 6600 x 5.300 x 5.400 mm - Weight (approximate) 60 tons GEOMETRICAL TESTS (ISO 3655, ISO 230 ...

VTL 33 CNC exceptional height 3600 UMARO Table diameter: 3000 mm Maximum machining diameter: 3300 mm Maximum working height: 3600 mm Maximum work piece weight: 18 tones

CNC VTL ,2 heads ,2 disc magazines REM SCR 50 CNC 2S

Vertical Turning center SCR 45 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.500 Machining Diameter 4.600 mm Machining Heights 1.800 mm Work Piece Weight 20,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Work Table WorkTable Diameter 4.500 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 by 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines two ATC for 12 turning ...

For sale CNC Vertical Turning Lathe. Technical Details: Faceplate Diameter: 4.000 mm Max. Turning Diameter: 4.400 mm Machining Height: 2.050 mm Max. Work Piece Weight: 18 tons Siemens CNC Control

Nominal Turning Envelope Faceplate Diameter 4,000 mm Machining Diameter 4,250 mm Machining Heights 2,000 mm Work Piece Weight 20,000 kg X-Axis Ram Carriage From -300 mm To 2,850 mm W-Axis Elevating CrossRail 1.800 mm Z-Axis Ram 1,350 mm WorkTable Diameter 4,000 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 125,000 Nm WorkTable Milling Speed 0.02 to 1.5 rpm Milling Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm 2XRam Size Turning Milling 250X250 mm RAM cross section Tool shank size: ISO 50 I09rgztr Ram Spindle Speed 0 to 3,000 rpm Power Continuous S1 37 kW Torque Continuous S1 2.000 Nm Tool Storage And Interchange Number Of Tool Magazines one ATC for 12 turning and/or milling toolholder Tool Storage 12 X2 Maximum Singular Tool Weight 50 kg Maximum tool long 600 mm X and Z axes thrust Continuous S1 50,000 N X  ...

For sale REM Vertical Turning Lathe SC 43/44 with DRO. Technical Details: Faceplate Diameter: 4.000 mm Max. Turning Diameter: 4.400 mm Bqyuqbw8uq Machining Height: 2.050 mm Max. Work Piece Weight: 18 tons DRO Control

Maximum turning diameter: 10000 mm Maximum turning height over table: - Standard: 3150 mm TABLE: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,4÷40 RPM Table speed range –milling mode: 0,001÷2 RPM Power of main drive motor: 100 kW CROSS RAIL: Cross rail vertical travel: 2500 mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 250 x 250 mm Travel on Z axis: 1600 Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM WEIGHT OF MACHINE TOOL: 180000 kg OVERALL DIMENSION OF MACHINE TOOL: – Length x Width x Height: 13000 x 16000 x 10500 mm

Heavy Duty 1 column Vertical Lathe UMARO SCM 60/100 Technical Specifications: Faceplate diameter: 4770mm Max. turning diameter: 6300mm Max. height of workpiece: 3500mm CNC Control Max. workpiece weight: 150 tons

Technical Details: Maximum turning diameter: 10000 mm Maximum turning height over table: - Standard: 3150 mm - Option: 3500; 4000; 4500 mm TABLE: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,4÷40 RPM Table speed range –milling mode: 0,001÷2 RPM Power of main drive motor: 100 (option: 130) kW CROSS RAIL: Cross rail vertical travel: 2500 (option: 3000; 3800) mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 360 x 360 mm Travel on Z axis: 1600 (option: 1800; 2000; 2300) Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM Power of RAM tool spindle drive motor: 37 (option: 41; 51)kW Machine tool tape: ...

CNC Vertical Lathe IM Roman, UMARO w/ 2500mm dia Technical Data: Faceplate diameter: 2500mm Max. turning diameter: 2650mm Max. height of workpiece: 1900mm CNC Control Max. workpiece weight: 15 tons

Maximum turning diameter: 8000 mm Maximum turning height over table: - Standard: 3150 mm - Option: 3500; 4000; 4500 mm TABLE dimensions: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,6÷45 RPM Table speed range –milling mode: 0,05÷2 RPM Power of main drive motor: 100 (option: 130) kW CROSS RAIL: Cross rail vertical travel: 2500 (option: 3000; 3800) mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 360 x 360 mm Travel on Z axis: 1600 (option: 1800; 2000; 2300) Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM Power of RAM tool spindle drive motor: 37 (option: 41)kW Machine tool tape: ISO 50 WEIGHT ...

5.5m CNC VTL w/ Two turning heads The machine is New, available due to a postponed order. Technical Characteristics CNC equipment Siemens 840Di Work piece diameter: 5.500 mm Bludhcom Max. height: 3.200 mm Work piece weight: 60 to Table diameter: 4.500 mm Table speed: 0.2 - 30 rpm Power of main drive: 100 kW Hydrostatic bearing for the table Cross rail vertical travel: 2.600 mm Ram vertical travel: 1.800 mm Ram horizontal travel: 3.150 mm Ram cross section: 300 mm x 300 mm

Vertical Turning Lathe with Double Columns UMARO SC 53 Technical Data: Table diameter: 4500mm Max. turning diameter: 5000mm Max. height of workpiece: 3000mm Conventional Control Max. workpiece weight: 30 tons Working table range of rotation speed: 0.85-25.4 r/min Working table step of rotation speed: stepless Horizontal travel of tool post: 2650mm Crossbeam travel: 2150mm Power of main motor: 75 kW Weight of machine (approx.): 80tons

CNC Vertical Lathe REM SC 27-CNC-2S with 2 heads for sale in our stock. Technical Data: Faceplate diameter: 2500mm Max. turning diameter: 2650mm Max. height of workpiece: 1900mm CNC Control Max. workpiece weight: 15 tons