turbo separator ag used for sale

Manufacturer: Alfa Laval Type: P3000 Year of construction: 1980 Max. sludge density: 1.25 kg/dm Max. drum speed: 4000 rpm

SPX Bactofuge for Milk Make : SPX Model : SE 355 BX -03 P2 Capacity : 10,000 Litres per hour Y.o.m : 2014 Skid mounted Condition : Very Good Included : Tools , Manual book, control panel HMI touch screen

Cream Separator 8500 l/h to 10,000 litres per hour Make : Westfalia Model : MSE 85 -01-177 Y.o.m : 2008 Condition : Very Good Tools, Control panel, Manual Book , Base Plate Contact us to arrange a visit at our facilities in Derby

Continuous production of fresh cheese (quark) up to 50% fat in Dry Matter. The protein contained in the coagulated milk is separated from the whey in the rotating bowl and is continuously discharged through nozzles. Equipped for CIP cleaning. Machine comes with the bowl, motor (20 kW), motor cover, frame to put the separator on (± 80 cm above the floor), control panel (Allen Bradley PLC and panelview touchscreen panel) and some service tools for maintenance (not all available). Input flow rate for skim milk± 7.200 liter per hour. Output of low fat quark up to 1.500 kg/h (depending on dry matter in the quark, the composition / temperature of the coagulated skim milk and the type of nozzles used inside the quark separator)., Type of Machine: Quark separator, Capacity: 1.500 kg per hour (quark output), Bowl speed: 5.350 rpm, Motor: 20 kW - 380 V - 2.905 rpm - 37,5 A - 50 Hz, Weight: ± 1. ...

Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (15 kW), motor cover, water valves (original Westfalia) and service tools for maintenance including pressing tool., Excluding:, - Base frame with feet., - Control panel., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 5.000 liter per hour, Bowl speed: 6.450 rpm, Motor: 15 kW - 380 V - 30 A - 1.450 rpm - 50 Hz - 3 Ph

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (11 kW), base plate, feet, control panel, water valves, inlet and outlet pipes and service tools for maintenance., Excluding:, - Motor cover., Type of Machine: Cream Separator / Skimmer, Capacity: 5.000 - 7.000 liter per hour, Bowl speed: 6.520 rpm, Motor: 11 kW - 380 V - 50 Hz - 1460 rpm, Weight: ± 1.300 kg

Bactofuge (Bacterial removing separator). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, baseframe with feet, manometer on in / outlet, control panel (upgraded by Centrimax with Siemens S7 PLC and CE labelling) and several service tools for maintenance. It was working till the end of the production of the former dairy., Excluding:, - Water valves., - Sludge tank / cyclone., - Counter pressure valve., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 25.000 liter per hour, Bowl speed: 4.700 rpm, Motor: 37 kW

Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (25 kW), motor cover, desludge cyclone, CPM-valve for the pressure regulation, control panel (original Tetra Pak) and waterbox (original Tetra Pak), interconnecting piping and service tools for maintenance with pressing tool., Exlcluding:, - Base plate., - Legs., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 25.000 liter per hour, Bowl speed: 4.265 rpm, Motor: 25 kW

Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (22 kW), desludge cyclone, base plate, feet, CPM-valve for the pressure regulation, control panel (original Alfa Laval) and waterbox (original Alfa Laval)., Without Service tools for maintenance., Capacity 10.000 - 15.000 liter per hour., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 15.000 liter per hour, Bowl speed: 5.069 rpm, Motor: 22 kW

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, cyclone, motor (18,5 kW), motor cover, base plate, feet, CPM-valve for the pressure regulation, control panel (original Alfa Laval) and service tools for maintenance including pressing tool., Excluding:, - Waterbox, Type of Machine: Cream Separator / Skimmer, Capacity: 15.000 liter per hour, Motor: 18,5 kW - 380 V - 50 Hz - 1470 rpm - 36 Amp - 3 Ph, Dimensions: 200 x 105 x 175 cm, Weight: ± 1.500 kg

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 7.000 liter per hour., Standardization capacity: 10.000 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. The percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 7.500 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special S ...

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 10.000 liter per hour., Standardization capacity: 15.000 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, ma ...

New whey clarification separator (clarifier / cleaner) for removing curd fines from the whey, so that the subsequent skimming process is more efficient. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. The best performance is achieved if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Whey clarification capacity: 15.000 liter per hour., The new offered whey clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substance (collected in the periphery of the bowl in the sludge chamber) periodically automatically eje ...

New whey clarification separator (clarifier / cleaner) for removing curd fines from the whey, so that the subsequent skimming process is more efficient. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. The best performance is achieved if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Whey clarification capacity: 12.000 liter per hour., The new offered whey clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substance (collected in the periphery of the bowl in the sludge chamber) periodically automatically eje ...

New whey clarification separator (clarifier / cleaner) for removing curd fines from the whey, so that the subsequent skimming process is more efficient. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. The best performance is achieved if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Whey clarification capacity: 10.000 liter per hour., The new offered whey clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substance (collected in the periphery of the bowl in the sludge chamber) periodically automatically eje ...

New milk clarification separator (clarifier / cleaner) for removing impurities from milk and reduces the level of leucocytes and bacteria. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Product: Fresh cows milk (≤ 48h from milking). It can be carried out using both hot and / or cold milk, but the best performance is acheived if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Milk clarification capacity: 15.000 liter per hour., The new offered milk clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substan ...

New milk clarification separator (clarifier / cleaner) for removing impurities from milk and reduces the level of leucocytes and bacteria. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Product: Fresh cows milk (≤ 48h from milking). It can be carried out using both hot and / or cold milk, but the best performance is acheived if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Milk clarification capacity: 12.000 liter per hour., The new offered milk clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substan ...

New milk clarification separator (clarifier / cleaner) for removing impurities from milk and reduces the level of leucocytes and bacteria. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Product: Fresh cows milk (≤ 48h from milking). It can be carried out using both hot and / or cold milk, but the best performance is acheived if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Milk clarification capacity: 10.000 liter per hour., The new offered milk clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substan ...

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 10.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, ma ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. Ther percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 15.000 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. Ther percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 10.000 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special ...

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 5.000 liter per hour., Standardization capacity: 7.500 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless AISI 304., - Bowl with disc stack, made out o ...

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 6.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 8.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

ID3197 Wolf TSP 124 year/Year of construction 2020 1850 kg Bucket separator, excavator class: from 18 t, wheel loader class: from 10 t, cutting width: 1200 mm, volume: 1.5 cbm, screening area: 1.10 m², throughput/hour: 52-77 cbm/hour, working pressure: 280-300 bar, oil requirement: 150-200 l, max. pressure: 320 bar, with Lehnhoff MS21 quick coupler bucket separator, excavator class: from 18 t, wheel loader class: from 10 t, cutting width: 1200 mm, volume: 1.5 cbm, screening area: 1.10 sqm, throughput/hour: 52-77 cbm/h, working pressure: 280-300 bar, oil requirement: 150-200 l, pressure max.: 320 bar, with quick coupler Lehnhoff MS21

Vertical centrifugal separator, for the clarification of the oil, eliminating the small particles of low density that may remain in suspension in it and separating the remains of water that the oil contains. Power: 7.5kW

Sigma floor-standing refrigerated centrifuge 8 KS, water-cooled, GMP version, inert gas device. The Sigma 8KS laboratory centrifuge has a low access height for easy loading and unloading, is pleasantly quiet in operation and has low power consumption. It can be used for all tasks in blood banks, medicine and research. The capacity is 12l for production. Technical data: Max. Speed [min-1]: 10,500 Max. Gravity field [x g]: 20,954 Max. Capacity [ml]: 12,000 ml Temperature range: -20°C to +40°C Memory locations: 60 Accessories: 1 pc. Swing-out rotor for 6 cups 6 pcs. Double beakers 2x1000 ml (clean room) 36 pcs. Stainless steel bottle 1000 ml with cap

Description: Ventilated benchtop centrifuge Mega Star 600, brand VWR Condition: Excellent, Year of purchase: End 2018. Price Characteristics: Benchtop centrifuge ideal for a wide range of applications such as the research in the pharmaceutical and biotechnology industry and research university. Auto-Lock 3 rotor locking system: Rotor change without tools at the touch of a button; users can quickly change the rotors and easy access to the rotor chamber for cleaning. ClickSeal aerosol-tight bucket sealing system: user-friendly one-handed gloved opening/closing, no need for screw caps or complex clips. SMARTSpin technology optimises acceleration, residual braking and residual load imbalance for maximum safety, regular analysis and reproducible separations. The pulse function saves time for short analyses. Intuitive controls and a large, bright LED display make operation easy. and  ...

System separator, non-return valve, check valve HONEYWELL BA298 Type BA DN 1 1/2 ( DN65 ) PN 10 V: 5,76 m3/h Installation dimension: 540 mm with male threaded grommets, nominal diameter: 1 1/2 inch Material: Stainless steel ( housing ), gunmetal ( fittings ) used, tested ! Dimensions ( system separator ): 540 x 280 x 110 mm Dimensions ( packaging ): 550 x 3000 x 150 mm

We sell here a separator from the manufacturer Baader, type 601 in a very good used and functional condition. The machine runs on 400 volts, 3 kW, built in 2000, soft separator with 3 and 5 mm drum, workshop tested, ready for immediate use, dimensions W/D/H 102/84/130 cm, others on request.

Basket centrifuge made by ZVU, A.S. Czech Republic, model KLVN 500, perforated stainless steel basket diameter 500mm, 245mm deep, diameter of the holes (apertures) 6mm, thickness of wall of basket 4mm, equipped by additional inside screen, overall drum is from cast-iron stainless steel lined, driven by el. motor explosive proof (EXdII BT4) 50HZ/380V, 4kW, drive is mounted under the overall drum, electrical break, top loading and unloading, maximum charge 40kg of suspension, maximum revolutions 1420 rpm, total weight of the machine 590 kg.

Alfa Laval SRPX 614 HGV-74C Used Used tools

Inv. Num. : 6127 Producer: Camfil Created: 2017 Parameters: Filter included.

Inv. Num. : 6026 Type: NA K-3600 Producer: ESTA Created: 2012 Parameters: Supply voltage: 400 V Air flow rate: 3125 m³/h Current consumption: 10.9 A Machine dimensions: 950x950x3510 mm Machine weight: 510 kg

EDDY CURRENT SEPARATOR BRAND : ERIEZ MODEL : REV X - E ST22-40'' TOTAL WIDTH : 1000 MM 1500KG / HR

STADLER BALLISTIC SEPARATOR BRAND : STADLER CONDITION : USED IN EXCELLENT CONDITION

Approx. Onsite Dimension. (l x w x h): 400 x 400 x 700 mm, weight approx.: 40 kg

Cream separator (Skimmer). Self cleaning. Machine is mounted on a stainless steel frame and comes with the bowl, motor (22 kW), motor cover, feet, CPM-valve for the pressure regulation, control panel (original Alfa Laval, SattCan05 Slimline), waterbox (original Alfa Laval), all inlet/outlet pipes and service tools including pressing tool for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 20.000 liter per hour, Bowl speed: 5.069 rpm, Motor: 22 kW - 380 V - 50 Hz, Weight: ± 1.700 kg, Dimensions: 240 x 225 x 215 cm

Maintenance toolset for an Alfa Laval 518 HGV separator / skimmer. Including pressing tool with adapter., Type of Machine: Toolset , Pressing tool: Yes

5x new discs for an Alfa Laval 518 HGV separator / skimmer. Part number of Tetra Pak: 6-54174180, Bowl disc., Type of Machine: Bowl disc, Number of pieces: 5x, Part number of Tetra Pak: 6-54174180

Manufacturer: Guinard Centrifugation (Andritz) Model: D5LP50HBIL Year: 1993 Type: Decanter / centrifugal separator   Previous use: sludge Nominal speed: 2700 rpm - Maximum: 3200 rpm Nominal diameter : 520 :mm Power : 45 KW   Second screw available: new / reconditioned by manufacturer Output extraction / pumping system Inspection report 12,000 H : available (29/01/2021)

Manufacturer: GEA Westfalia separator Model : ca 220-110 Year : 1985 - 2004 Type : Gas-tight centrifuge / decanter, for operation under normal atmospheric pressure : low cone bowl.   Atex : (Ex) d3nG4 Electrical cabinet : year 2004 Danfoss frequency controller (prod + CIP use) Automatic lubrication Hydraulic flow: 7,000 litres/h Bowl diameter: 220 mm Bowl length to diameter ratio L/D: 2.65 Bowl rotation speed: maximum 5,500 min-1 Centrifugal acceleration z: maximum 3,700 g Bowl moment of inertia GD2: 1.0 kg/m2 ADF motor power: 11 KW Motor speed: 3,000 rpm Net weight of machine (without motor and accessories): 650kg

Description: Output: max. 3,150 m³/h Negative air pressure: max. 2,250 PA Voltage: 3 x 400 V Motor power: 3 kW Waste container volume: 72 l Compressed air consumption: 73 Nm³/h Suction nozzle: 1 x 160 mm / 1 x 200 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 1,100 x 2,700 mm, weight approx.: 260 kg

Technical data single-deck ballistic separator for three separation fractions: Manufacturer Lubo Screening & Recycling Systems B.V. Type Elliptical 10EBB05 Year of construction 2015 Screening area 12.5 m², consisting of 6 screen paddles 400 x 5000 mm Weight 7,100 kg Note on the separation process: The Lubo Elliptical is a state-of-the-art ballistic separator. It separates the material stream into three fractions, heavier 3D fractions such as tin cans or PET bottles, lighter 2D fractions and screened fines. This ensures high separation quality for various waste streams such as mixed waste, packaging, mixed paper, film and cans. Condition of the machine: The Elliptical 10EBB05 ballistic separator is still in use at a large recycling company separating mixed waste until the 18th calendar week, when it will be replaced by a larger machine with a higher throughput capacity. The machine is in ...

Westfalia Revolution / minute: 10000 More then 300 machines new and second hand on our seema .de

Schaltschrank und Ventilsteueranlage Leistung ca.15.000 - 20.000 ltr / Stunde, abhängig vom Produkt. automatische Selbstaustragung (Englisch: self cleaning disc separator) Hydrohermetischew Dichtung (für Bier,Kvas und andere sauerstoffempflindliche Produkte geeignet Westfalia Separator SA 60-47-076 Selbstaustragend 3000 -15000 l/h Schaltschrank und Ventilsteueranlage More then 300 machines new and second hand on our seema .de

Aluminium angled conveyor belt incl. substructure horizontal area 1,500mm Rising area 2,100mm Angle in bend 35° Feed height: 200mm Discharge height 1,500mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm Centrally welded T-40 cleats - approx. 400mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm Accessories: Design for the suspension of the overbelt magnetic separator Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300 ...

Complete solution for the transport of bulk materials such as shredded material, wood chips, wood pellets, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm (customizable) Rising area 5,000mm (customizable) Angle in bend 35, 40 or 45° Feed height: horizontal (individual) Drop height individually adjustable Construction: height-adjustable (to be moved) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Propulsion: Motor 1.1KW ( adjustable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 cleats - 400mm pitch 2-ply particularly transversely stable Permanently mounted overbelt magnetic  ...

Permanent Overbelt Magnetic Separator TYPE DMPM800 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite mag ...