turbine siemens used for sale

Compounding plant for fiberglass contaminant PE/PP Snail/LD 70/38 Material: PE, PP // Extruder with high-wear process unit (HIP), segmented screws and cylinders of 70 mm / 40D, AC-motor 260 kW,, degassing, continuous rotor, vacuum pump, pressure transducer, 4-fold dosing, 3+1-fold gravimetric dosing, side-dose PSF 46, strand head, water bath, strand granulator, temperature control unit, water cooler, material conveyer, Siemens S7 central control with visualization

Working area Max. swing: 650 mm Swing over cross slides: 465 mm Max. turning diameter: 400 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X/Z) : 30/30 m/min Main Spindle Spindle head (flat flange): 170 h5 mm Bar capacity: ? 65 mm / ? 75 mm Spindle diameter in the front bearing: 130 mm Chuck: 250/315 Drive power (40/100% ED): 17.5 kW/12.5 kW Maximum torque (40/100% ED): 370 Nm/280 Nm Maximum speed: 4000 rpm Tool holder To ISO 230-2 in X/Z axes (indirect measurment system) : 8/8 ?m To ISO 230-2 for C axis: 20 ?m Tool holder Number of toll stations: 12 of which driven tool stations: 12 Shank diameter: 40 mm Drive power (40% ED) at 2000rpm: 4.2 kW Maximum torque (40% ED): 20 Nm Maximum speed: 4000 rpm Controls SIMline withOperate on SIEMENS 840D solutionline Weight: 5800 kg

CNC Double Column Vertical Lathe GORBREX model TKV525( built on the corp of SEDIN Lathe )Manufacturer: GORBREX – PolandModel: TKV525 Machine is new and build on Customer requestCondition : very good, under powerControl: SIEMENS or other - on Customer request Delivery time: 6 - 12 monthsMachine with warranty!Technical details :Table diameter: 2250 mmDistance between table and ram 0 - 1780 mmDistance between table and lower surface of transversal beam 400 - 2140 mmWorkpiece :Max workpiece diameter 2500 mmPictures are of one which was made for our German Customner and delivered to him last autumn.

Working area Circulation diameter over bed web cover: 700 mm Max turning diameter: 410 mm Max turning length: 800 mm Rod passage: 65 (76) mm Chuck diameter: 250 (315) mm Flat stroke: 300 mm Longitudinal stroke: 850 mm Feeds Rapid response X/Z axles: 60/30 m/min Y axis 22.5 m/min Max. spindle motor speed: 6,000 rpm Main Spindle Spindle head (flat flange): 170 h5 mm Spindle diameter in the front bearing: 130 mm Spindle bore: 87 mm Main drive Power of the three-phase main drive 25 kW Torque (100% ED) 280 Nm Speed range 25 - 5000 1/min Drive power rating (100% DC): 35 kW(AC) Counter spindle: ISM 52 ISM 76 synchronous Spindle head (flat flange) : 140 h5 mm 170 h5 mm Spindle diameter in the front bearing: 100 mm 130 mm Spindle bore: 73 mm 87 mm Counter spind ...

The profile perforating machine INTESO S3130T was manufactured in 2011 in the Czech Republic. Technical parameters: - Maximum internal diameter of the sheet metal coil: 80 mm - Maximum length of the finished product: 3000 mm Technical data : - screen control panel: SIEMENS - maximum length of profiles: 3000 mm - maximum cross-section of perforated profiles: 120 x 80 mm; fi 80 mm - automatic linear feed - optical sensor for automatic control of the correct length of the part - linear positioning of the hydraulic cylinder stroke - non-deformation perforation technology - the possibility of perforating profiles of various shapes - memory of perforation programs - two-sided perforation (in one operation) and one-sided perforation - automatic lubrication - maximum pressure of the hydraulic press in the line: 147 kN (15 tons) Tool accessories for the INTESO S3130 T punchin ...

Material: PS, PE, PP, PA, // Details: DC motor 145 kW, screw revolutions: up to 600rpm, screw diameter 70 mm, L/D 32, segmented screws and cylinders, degassing (optional vacuum pump), control: Siemens S7 with visualization. incl. strand nozzle with water bath and strand granulator, motor up to 265kW possible. For extra charge: underwater granulation, or water ring granulation

SIEMENS PLC Pulling force : 80kN Broaching stroke (max.) : 1250mm Spindle feed stroke (max.) : 500mm Spindle length: 650-1400mm Table width: 400mm Broaching speed (max.): 1-10m/min Return stroke speed (max.): 1-15m/min Weight of the machine: 4300 Kg Weight of electric cabinet: 400 Kg Power: 25kW

SIEMENS PLC Pulling force : 80kN Broaching stroke (max.) : 1250mm Spindle feed stroke (max.) : 500mm Spindle length: 650-1400mm Table width: 400mm Broaching speed (max.): 1-10m/min Return stroke speed (max.): 1-15m/min Weight of the machine: 4300 Kg Weight of electric cabinet: 400 Kg Power: 25kW

Working area Circulation diameter over bed web cover: 700 mm Max turning diameter: 410 mm Max turning length: 800 mm Rod passage: 65 (76) mm Chuck diameter: 250 (315) mm Flat stroke: 300 mm Longitudinal stroke: 850 mm Feeds Rapid response X/Z axles: 60/30 m/min Y axis 22.5 m/min Max. spindle motor speed: 6,000 rpm Main Spindle Spindle head (flat flange): 170 h5 mm Spindle diameter in the front bearing: 130 mm Spindle bore: 87 mm Main drive Power of the three-phase main drive 25 kW Torque (100% ED) 280 Nm Speed range 25 - 5000 1/min Drive power rating (100% DC): 35 kW(AC) Counter spindle: ISM 52 ISM 76 synchronous Spindle head (flat flange) : 140 h5 mm 170 h5 mm Spindle diameter in the front bearing: 100 mm 130 mm Spindle bore: 73 mm 87 mm Counter spind ...

Turning diameter: 1420 mm Turning length: 3000 mm Turret positions: 8 CNC Brand: Siemens CNC Model: 840 D-SL Krewema - HDFM 55 x 3000 CNC Lathe Ø 1420 x 3000 mm C-Axis Live Tools = Mach4metal 6986 4 chuck 1600 mm 4 chuck 900 mm 3 chuck 630 mm ( bore 310) Sauter 8 position revolver Vdi 60 tool system Internal coolant tool holder Radial live tool holder Axial live tool holder Chip conveyor Internal coolant tool holder Swing over bed Ø: 1.420mm Swing over cross slide Ø:920mm Swing in the gap Ø: 2.050mm DBC Turning Length: 3000/4000 mm Gap length: 1.000mm Spindle bore: 155mm Spindle power: 51kW Bed width: 750mm Tailstock spindle Ø: 160Ø Stroke pinole: 300mm Spindle taper: MET 80 Mk Speeds / ranges: 1200Rpm Feed rate X-Axis: 8.000mm/min. Feed rate Z-Axis: 6.000mm/min. Length: 9.000 mm Width: 3.500 mm Height: 3.200 mm

Hollow-chamber plate system Material: PC, PP Extruder: Breyer Screw diameter: 120 mm, L/D: 33 Engine: 200 kW with degassing, Siemens "Simatic OP17" PLC control, vacuum station with water ring pump and condensate pots, sieve changer Gneuß SF75, melt pump Maag 56/56, calibrator OMIPA 2400 mm, 10-fold multi-roll extractor OMIPA, 2 roll extractor OMIPA, protective film laminating station, hot-knife longitudinal separation, OMIPA cross saw 2400 mm R

Machine Details Warehouse number 1105-03592 Machine type lathe - cycle controlled FAT brand Type TUR 630 MN Year of construction 2011 Control type CNC Control Siemens 810D MANUAL TURN Storage location FRANCE Country of origin Poland Delivery time immediately Freight base Freely loaded from location Technical details Turning diameter 370 mm Turning length 3000 mm Top height above bed 630 mm Circulation diameter max. via face slider 370 mm Spindle bore 105 mm Spindle speeds: 2 stages 2 - 2500 rpm Tool holder REVOLVER VDI 40 Control Siemens 810D MANUAL TURN Total power requirement 18.5 kW Machine weight approx. 6 t Information Equipment: REVOLVER 8 COMPARTMENT VDI 40 Chip protection wall automatic coolant device RS 232 interface 3-jaw chuck diameter 315 mm HOLLOW SPINDLE THROUGH. 105 MM automatic lubrication system Brochure LUNETTEN 1 STUCCO

Material: PE, PP, PS, ABS + talc, fibers / Details: twin-screw extruder PLAMA ZSP 70, segmented screws and cylinders, DC motor 260 kW, degassing, vacuum pump, side feed, low temperature control unit SINGLE, 4+1 gravimetric dosing BRABENDER incl. working platform, screen changer GNEUSS RSF 150, start-up crossover, underwater granulation GALA MAP6 with cutting rotor, water system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization SIEMENS Multi Panel 270B Touch. Power: approx. 600 - 800 KG/hr

Powder mixing plant Ytron Dr. Karg, built in 2012 and with Flow tank. Capacity up to 10 to/h The powder was treated via pipes into the flow vessel. The whey or milk powder mixture was via the plate heater and hot water Cycle in batch operation with the basic tanks set and then released for further processing. With frame and staircase a.) With a GEA plate heater for treatment the powder water solution. Hersteler FA. GEA TDS GmbH, Sarstedt Type: VT 20 CD-9-C-16 170/7412 No. 3600 4074, year of construction 2012 b.) With wall-mounted control cabinet system Siemens S 7 for process technology, CIP tank system and Control of cleaning paths c.) With 1 CIP system for the standing tank as a 1-tank cleaning system for the Batch operation and for the powder mixing plant Self. Content CIP tanks 15,000 l insulated, deformed inwards in the upper area with valve no ...

Material: PE, PP, PS, ABS / Details: three-phase motor 215 kW, segmented screws and cylinders, continuous rotors, screw diameter 50 mm, L/D 40, power: approx. 400 - 800 KG/hr, degassing, SIHI vacuum pump, gravimetric belt scale K-Tron WF 300 with stubble, strand nozzle, continuous cooling belt, cooling tank, squid granulator Scheer SGS 100, moisture measuring unit, control unit Siemens S7 with visualization.

A 7-stage GEA Wiegand evaporation plant with mechanical vapour compression, Made of V4A material with 2 identical high concentrators and one Vapour compression system for 2 Hoko systems. Capacity: 50,000 litres per hour Year of manufacture 2007 Product enema: 52,000 kg or 38,500 kg/h Concentrate: 12,240 kg or 18,900 kg/h for truck transport Steam consumption Low pressure steam : 300 kg/h with Live steam: 1,000 kg/h, when heating the system max. 2,300 kg/h further energy data can be found in the plant With a concentrate supply tank and with a complete cleaning system, location ground floor with complete tank piping to 2 x 50,000 l tanks and with complete control in Siemens S 7, as well as for the Entire electrical supply with 5 wall control cabinets for pneumatic cabling housed in 5 control cabinets, with various smaller frequency converters and 1 frequency con ...

Turning diameter: 900 mm Turning length: 4500 mm Turret positions: 0 CNC Brand: Siemens CNC Model: Siemens Sinumrik Front and Rear chuck 885 mm Multi fix tool system Max. turning Ø:900mm X-Axis:        590mm Z-Axis:        4500mm Spindle bore:  355mm Speedrange:    500Rpm Spindle power: 45kW Pinole taper:  6Mk Stroke pinole: 300mm Quill Ø:       140mm Length:        6900mm Width:         2600mm Height:        2200mm Weight:        10500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitut ...

Siemens Vertix 3D built 2010, refurbished 2019 The offer includes the following components: 3D ceiling stand with integrated cassette holder for ENT recording Grid wall 3D hydraulic multixtable Polydoros LX 30/50 Generator with touchscreen control panel Dose area productmeasuring device Agfa CR 85X Memory Film Scanner Transportation €860.00 Installation €2500.00 Optional: Full body grid wall AGFA CR Easylift, new X-ray tube, C-bow Ziehm Vista 6 months warranty When ordering by 01.03.2020 10% discount

Capacity: 250 t Table length: 2500 mm Table width: 1000 mm Stroke: 1000 mm CNC Brand: Siemens CNC Model: Siemens TOUCH Railway presses Hegenscheidt MFD - PR 250 / 1000 Rebuild in 2010 with SIEMENS TOUCH Rebuild cost EUR 200.000 Distance measuring device with double taster Big package with pressing tools in several diameters Centre height:      550mm Max. wheel tread Ø: 1100mm Max. wheelset length:2500mm Max. pressing force:250T Max. cylinder stroke:500mm Cylinder Ø:         300 Working speed:      10 - 80mm/min. Pinole feed:        1300mm/min. Return speed:       1300mm/min. Length:             6100mm Width:              5730mm Height:             3750mm Weight:&nbs ...

Universal and variable X-ray system. Mobile C-bow with 80 kW power iruund compact design. Particularly suitable for vascular diagnosis and surgery, cardiology, neurology, orthopedics, etc. Very good image quality through CCD Camera, image postprocessing, DICOM etc.

Head machine Kemper Soft Star -6 in a row -with plastic dough hopper -with Siemens Touch Panel control -Built 09/2007

Turning diameter: 950 mm Turning length: 5370 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 4   CNC Brand: Siemens CNC Model: SIEMENS 840D Max. turning Ø:   950mm X-Axis:           900 (+860 and -40)mm Y-Axis:           500mm Z-Axis:           5370mm B Axis:           195 (+90 and -105)° Spindle bore:     165mm Speedrange:       1600Rpm Spindle power:    145kW B-Axis Toolsystem:Sandvik C8 B-Axis Speedranges:4000Rpm B-Axis power:     25kW Pinole taper:     6Mk Stroke pinole:    200mm Quill Ø:          180mm Length:           14500mm Width:            450 ...

CATALOG NO. HZ017 PRODUCT FEATURES The manufacturer guarantees the quality of treatment The use of technology Viber shaking off Power is another milestone in the production of high-performance exhausts sawdust, which aim to provide the same fixed parameters during the entire extraction cycle. Lashing equipment in the electronics and engine technology Power Viber allows you to constantly monitor the status of dust The automatic vibratory cleaning the filter cloth - during the break, and during operation of the filter allows for constant monitoring of correct operation. The filter used in our odciągach was built from the filter elements of the expansion element, in which you enter the pipe. It is intended to produce a large expansion of air and, consequently, will result in free fall all sawdust and other waste containers / bags. Reliability confirmed by the factories every day s ...

Turning diameter: 400 mm Turning length: 500 mm Turret positions: 12 CNC Brand: Siemens CNC Model: SIEMENS 840D Max. turning Ø: 400mm X-Axis:         267mm Z-Axis:         500mm Spindle bore:   91mm Speedrange:     4000Rpm Spindle power:  18kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:5,5kW Chip conveyor:  Yes Tool eye:       Yes Pinole taper:   4Mk Stroke pinole:  120mm Quill Ø:        120mm Length:         3500mm Width:          2300mm Height:         2100mm Weight:         5000kg

Filling device electrically heated agitator tank approx. 90 litres capacity heated Mouvex ring piston pump, electric heating, control cabinet with Siemens PLC and FU for pump and agitator, in mobile stainless steel frame.

Machine will be complete refurbished with new parts width: 1200 mm PLC: Siemens S5 Diameter: 2-10 mm Pull out unit: MVL5

Hiwell batter mixer II, Hiwell DJJ100-II batter mixer utilizes ingenious mixer to evenly combine water and batter. This stainless steel mixer is applicable for high viscosity batters such as Tempura batter., Advantages, 1. Our parry battering machine involves utilization of cutting-edge control system, thus realizing repeatable operation cycles of high-speed mixing, low speed mixing and alarm on application of batter. Therefore, batter is prevented from sedimentation., 2. Mixing tank in this fruit battering equipment is endowed with separation layer, which is aimed to keep batter temperature between 10-20℃ by ice or cold medium., 3. Our batter mixing equipment comes with batter output pump, which offers excellent connectivity to battering equipment to form batter feeder., 4. Thanks to reliable protection system and Siemens electronic components, thisfruit processing equipment is operat ...

Multi-chamber diving system make ROLL type RVT 48/32/20/1Komm.-Nr. 3308 built in 1986, with retrofitted drying com. -No: K 3627 built in 1988Basket size L x W x H: 480 x 320 x 200 mmCycle time: according to program, time is preselectedDrying: hot air, negative pressureset temperatures pool ca.:70° CExhaust air volume: 13 cbm / min. at 1800 PaCompressed air consumption: depending on the programCooling water consumption: depending on the program or throughputHeating hot air: 18 kWOperating pressure min.:6 barOperating vacuum approx. 100 mbarTotal connection value including cleaning system K 3308Heating: 46 kW, 70 AMotors: 12.3 kW, 34 A:Dimensions: 3600 x 1800 x 2600 mmWeight approx: 1500 kgWith- Control Siemens S5-115- In 1989 converted to aqueous alkaline detergentsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by ...

Teigabwieger Trima TA dough divider -with disused belt -1 Piston engine -with Siemens Touchpanle control -Weight range of 250- 2800 grams -Power of 650- 1500 pieces / hour -Stainless steel hopper -can be used on wheels

Bread machine Fortuna Premium K with Magnus head machine -6 in a row -Stainless steel -with Siemens Touch control -Cutting rolls and Kaiser rolls -Built in 2010

CNC lathe fabr. SCHERER-FEINBAU type SNC 80Machine -No: 8079 Year 1995Distance between centers: 350 mmCircumference diameter over bed: 320 mmCircumference diameter over support: 160 mmPath Z + X: 250 mmSpindle mount: DIN 55021 / A 3Speed range up to: 6000 rpm.Feed infinitely variable: 0.1 - 10000 mm / min.Rapid traverse: 10 m / min.Quill stroke: 125 mmDrive power: 7.0 kWWeight approx: 2.0 tOutside dimensions approx: 2100 x 1500 x 1900 mmWith- Siemens control 810 T- power chuck- Linear turret with 4 tool holders- Cooling deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Glass bottle washer, MAG Schymanski Enomeco, year: 2000, complete stainless steel, Siemens S7, for 330 ml + 500 ml and 500 ml bottle with swing stopper clip lock, capacity up to 7,000 bph.

Machine details Location 1105-02917 Machine type Machining Center - Vertical Make DECKEL-MAHO DMG Type DMC 63 V Built 2001 Control type Cnc Location France Origin Germany Delivery JULY 2020 Freight base from stock, freely loaded Price On request Technical details x-Way 630 mm y-way 500 mm z-way 500 mm Table size 800 x 500 mm Spindle mount ISO 40 Range 0 - 8000 rpm Feeds - longitudinal/transverse/vertical 1 - 30000 mm/min Rapids - longitudinal/transverse/vertical 30 m/min Number of tool magazine slots 24 Tool diameter at full assembly 80 mm Tool diameter at 2 free spaces 140 mm Tool length max. 300 mm Tool weight max. 7 kg Table load 500 kg Spindle motor 9 / 13 kW Control Siemens 810 D Total performance requirements 30 kVA Machine weight approx. 4.2 t Information Tested machine ready for demonstration under current YEAR OF ...

year: 1996 capacity: approx 350 cycles / h with 8 heads (long side leading) single lane with Siemens S5 PLC incl. 6-lane infeed conveyor (with one drive station) Presently equipped for handling of 6 x 4 = 24 x 0,2l glass bottles / crate.

3000 x 1500mm 3200w Siemens 840

CNC lathe make MONFORTS type DNC 5Year 1995 with C-axis and driven tool stationsCircumference diameter: 560 mmNumber of revolvers: 2Travel distance Z1 / Z 600/600 mmTravel X1 / X 260/260 mmMax. Spindle distance: 1460 mmSpindle passage: 85 mmSpindle flange: A8 / A8feed drivesRapid traverse Z1 / Z 15/15 m / minRapid traverse X1 / X 12/12 m / minFeed force Z1 / Z 11900/11900 NFeed force X1 / X 6600/6600 NNumber of revolvers: 2Number of tools per turret: 12Straight shank: 40 mmTurning tool shank: 25 x 25 mmSpeed range: 5 - 4000 rpm.Drive power: 18/24 kWWith:- CNC control SIEMENS 840 C- C axis- 2 tool turrets with driven tool stations- without driven tools- 2 opposite spindles- 1 set of tool holders- Chip conveyorSingle-layered run!usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors except ...

year: 1996 capacity: approx 350 cycles / h double lane with Siemens S5 PLC with 14 heads (long side leading) incl. infeed conveyor with one drive station incl. 2 magazines Presently equipped for handling of 3 x 4 = 12 x 1,0l PET bottles / crate. Including 1 additional set of heads for 10 x 1,5l PET bottles / crate.

Siemens MAMMOMAT INSPIRATION, built in 2009 with detector from 2007 in very good technical and optical condition

CNC lathes make SPINNER type TC 65 CMachine -No: 050023 built in 1996Technical specifications:Distance between centers :600 mmSwing diameter over bed: 400mmMax. turning diameter: 310 mmAdjustment path X-axis: 200 mmAdjustment path Z-axis: 500 mmAdjustment path Q-axis: 500 mmC-axis adjustment range:360°max. rapid traverse: 20 m/min.Feed: 0 - 15 m/min.Main spindle passage: 65 mmMax. spindle speed: 4000 rpm.Counter spindle passage: 26 mmMax. spindle speed: 6000 rpm.Quill diameter: 80 mmQuill stroke: 100 mmNumber of turret stations: 16-foldMain spindle motor: 14 kWTotal connection value: 20 kWWeight approx.: 4500 kgDimensions approx.: 1700 x 2200 x 1700 mmwith- Control Siemens 820 T- 16-fold revolver- counter spindle- C axis- 8 powered tools- Parts catcherused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment. ...

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

year: 1992 capacity: approx 300 cycles / h - with 7 heads (crates short side leading) - single lane - with Siemens S5 PLC Presently equipped for 3 x 4 = 12 x 0,7l GdB glass bottles / crate. Including 1 additional set of handling parts consisting of 6 heads for 3 x 4 = 12 bottles.

CNC lathes make SPINNER type TC 108 MCMachine -No: 040199/98215 built in 1998Technical specifications:Distance between centers: 1000 mmSwing diameter over bed: 520 mmMax. turning diameter: 358 mmAdjustment path X-axis: 296 mmAdjustment path Z-axis: 1090 mmMax. rapid traverse X-axis: 18 m/min.Max. Z-axis rapid traverse: 24 m/min.Bar Capacity: 107mmSpindle speed: 2500 rpm.Quill diameter: 110 mmQuill stroke: 100 mmNumber of driven stations:12Connected load: 50 kVAWeight approx.: 6500 kgDimensions approx.: 3590 x 1750 x 1890 mmwith- Control Siemens 810Dused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical console milling machine make HECKERT type FSS 315 SMachine -No: 314212/2 Year 1992Table longitudinal path X-axis: 950 mmKonseol vertical path Y-axis: 450 mmTransverse Z-axis: 500 mmCross slide cross travel: 270 mmTable size W x L: 430 x 1600 mmNumber of clamping stages: 4Table load: 1000 kgSpindle mount: ISA 4018 speeds: 28 - 1400 rpm.18 feeds lengthwise: 16 - 800 mm / minxa0xa0xa0 vertical: 5 - 250 mm / minRapid traverse longitudinal and transverse: 3150 mm / minRapid traverse vertical: 1000 mm / minDrive power: 1.5 kWConnected load: 8.0 kWDimensions: 2800 x 2800 x 1995 mmWeight approx: 3000 kgWith- swivel spindle head- tableau control- Control cabinet SIEMENS- Central lubricationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be plea ...

year: 1992 capacity: approx 300 cycles / h - with 7 heads (crates short side leading) - single lane - with Siemens S5 PLC Presently equipped for 3 x 4 = 12 x 0,7l GdB glass bottles / crate. Including 1 additional set of handling parts consisting of 6 heads for 3 x 4 = 12 bottles.

Labeling machine Krones Contiroll Capacity: 15-18 000 b / h. After extensive renovation and modernization, control the latest Siemens S7 1500 series. A simplified version of the central computer control. 18

Hydraulic press brake make HM type JONO 20.075Machine -No: 1143, built in 2002Press force: 75 tWorking length: 2000 mmStop length: 180 mmWorking speed / down: 10 mm / sWorking speed / high: 19 mm / sHydraulic motor: 11 kWSupply voltage: 3x400 VAC / 50 Hz + N + PEControl voltage: 24 VAC + 24 VDCMax. Pressure: 180 barOil quantity: 125 lWeight: 5.5 tExternal dimensions: 2340 x 2205 x 1965 mmWith- Control SIEMENS SIMATEC OP 7xa0xa0xa0 for X + Y- shared reef foot tool- Univ. die- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

21 x 3m power rail U - 400 VAC 3 x power rail U - 400 VAC 4 x Sockets 16 A 11 x Sockets Red small 16 A 5 x Sockets Red large 32 A 15 x Fuse box /distributor 63 A 2 x Box 16 A 1 x main power distributor for rails All in mint condition

The extrusion line was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system  ...

Eccentric press make RUHRMANN type ASR 45Ser. -No: 14326 Year 1996Press force: 45 tRam adjustment: 100 mmadjustable stroke: 20 - 200 mmPusher strokes: 40 - 160 per minuteTable size: 900 x 800 mmPlunger surface: 600 x 400 mmlargest distance table - ram: 800 mmInstallation height: 790 mmDiarrhea hole: 400 x 600 mmMax. Tool weight: 500 kgMotor power: 7.5 kWWeight approx: 7800 kgExternal dimensions approx: 1400 x 1600 x 3100 mmWith- Control Siemens Simatic OP 7- transverse shaft- swiveling control panel- Electric control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

NERI SL 200 3T labeler, with 3 labeling heads for front, back and neck labeling with 3 label dispensers. Suitable for containers from 20 to 80mm diameter, label height from 10 to 120mm, label length from 13 to 190mm. Fitted with overhead container support. Output up to 100 containers per minute. Siemens S7-300 PLC controller with Simatic OP7 operator interface. All stainless steel construction.