tube heat used for sale

Heating elements / heating rod for quail Piccolo NEW ( 4 pieces )for quail Piccolo transverse insertfor the proofing chamberRound elements 20mm diameter870/770mm230 volt / 600 WattSee picture for details

Heating elements / heating rod for quail Piccolo II NEW ( 4 pieces )for quail piccolo Year of manufacture until 04/2016for the steam / fermentation chamberRound elements 20mm diameter1250/1160mm400 Volt / 1100 WattFor details see picture

Heating elements / heating rod for quail Piccolo NEW ( 4 pieces )for quail piccolo 1-2 year of manufacture from 04-2016for the fermentation chamberRound elements 20mm diameter580/500mm230 Volt / 600 WattDetails see picture

Heating elements / heating rod for quail Piccolo II NEW ( 4 pieces )for quail piccolo Year of manufacture from 04/2016for the steam / fermentation chamberRound elements 20mm diameter1080/1000mm400 Volt / 1100 WattSee picture for details

Heating elements / heating rod for quail Piccolo NEW ( 4 pieces )for quail Piccolo 1-2 year of manufacture until 04-2016for the proofing chamberRound elements 20mm diameter680/580mm230 Volt / 600 WattFor details see picture

nominal power: 29,8 kW; air flow: 2400m³/h; combustion chamber depth: 580 mm; slide-in door: 330 mm x 330 mm; designed for room volumes: ca. 600 m³; aproximate surface to heat up: ca. 120 m²; floor space: 600 mm x 800 mm x 1900 mm; weight: 230 kg; diameter flue pipe: 160 mm; hot air delivery pipes: 2 x 200 mm; modes: automatic and manual; Chimney guideline value: 200 mm;

flue capacity: 125 kW; Conventional yeld capacity: 99 kW; flue diameter: 180 mm; hot air delivery pipes: 2 x 250 mm; flue length: 750 mm; oven width: 560 mm; oven hight: 700mm; air flow: 6300m³/h; power consumption: 1500W; aproximate surface to heat up: 1500m³; area to be heated: 300/350 m²; heater height without hot air conveying pipes: 1980 mm; heater width: 800 mm; heater length: 1280 mm; weight: 415 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic  ...

flue capacity: 175 kW; Conventional yeld capacity: 140 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 250 mm; flue length: 950 mm; oven width: 600 mm; oven hight: 860 mm; air flow: 6300 m³/h; power consumption: 8900 W; aproximate surface to heat up: 2200 m³; area to be heated: 500/600 m²; heater height without hot air conveying pipes: 2200 mm; heater width: 930 mm; heater length: 1700 mm; weight: 615 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special ela ...

flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption hot air fan: 3 kW; power consumption flue gas exhaust: 600 W; aproximate surface to heat up: 5000 m³; area to be heated: 1000 m²; heater height without hot air conveying pipes: 2500 mm; heater width: 1100 mm; heater length: 1900 mm; weight: 850 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery run ...

flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption: 2950 W; aproximate surface to heat up: 8000 m³; area to be heated: 1800 m²; heater height without hot air conveying pipes: 3000 mm; heater width: 1220 mm; heater length: 2700 mm; weight: 1575 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special e ...

flue capacity: 34 kW; Conventional yeld capacity: 29 kW; flue diameter: 160 mm; hot air delivery pipes: 2 x 180 mm; flue length: 500 mm; oven width: 400 mm; oven hight: 590 mm; air flow: 2200 m³/h; power consumption: 400 W; aproximate surface to heat up: 500 m³; area to be heated: 100/150 m²; heater height without hot air conveying pipes: 1560 mm; heater width : 550 mm; heater lenght: 920 mm; weight: 190 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...

Pre- and post-heating coil, air heating element, DN125, 371550, LHE 125 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Dimplex - 371550 - LHE 125 IS Air heating element Electric pre- and post-heating. 0.75 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +30°C, air flow monitor for detecting the smallest air flows at minimum operation and two safety temp ...

Pre- and post-heating coil, air heating element, DN160, 366260, LHE 160 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Unfortunately the type plate has come off - special price Dimplex - 366260 - LHE 160 IS Air heating element Electric pre- and post-heating. 1.5 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +60°C, air flow monitor for detecting the sma ...

 Heating rods / heating elements NEW( 4 pieces )for MIWE furnacePower : 415 WScapacity : 230 Vgestr. Length : 1330 mmof which unheated :2 x 100 mmTube diameter : 8.5 mmPipe casing material : 1.4571 / AISI 316 TiConnection : 500 mm G-strand 1.5mmClosure : SiliconeRHK curved : U-shape center-center 50 mm Fastening: sheet metal 90 x 24 mmSee picture for details

Heater Alfa Laval EH-W15 60kW + panel 4x15kW

Modular tube filler for pharmaceutical, cosmetic, chemical and food products. The modular concept allows it to grow along with customer needs, an initial configuration can be completed with automatic tube loading, device and tube print registration, manual or automatic tube feeding, heat sealing of plastic and laminated tubes. by means of hot jaws, compact operator panel, suitable for memorizing the working parameters. Tube diameter from 28 to 55 mm. Dosing capacity from 3 ml to 240 ml. Characteristics Model: COMBI Year 2002 Width: 1150mm Height: 2300mm Length: 2000mm Tube diameter from 28 to 55 mm Dosing capacity from 3 ml to 240 ml

<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once

<br>Flush cut and kicked end tuber with belt ri's system, 4-ply, photo cell, 0/2 or 4 end button color printer, range perforating system<><br<br>Verf Gbar: at once

Cheese pan / layered cheese pan / curd tub / drain versatile use Dimensions: Length x Width x Height: 61 x 62 x 81 cm Content approx.: 75 litres Expiration NW: 50

DIA. RANGE: 12.7 - 50.8 MM; STRIP WIDTH: 165 MM, THICKNESS: 0.6 - 2.0 MM; COIL WEIGHT: 500 KG, 60 M/MIN., ETC.

The Straw Applicator TSA Tubex 9001 is one of the save application solutions. Heavy structure and a speed up to 7500 units/h are ideal for the use with a TBA 19 Filler. The speed can be set variously.

STRIP WIDTH: MAX. 160 MM; THICKNESS RANGE: 0.5 - 3.0 MM, TUBE OD.: 12 - 50.8 MM, TUBE LENGTH: 3-6 M, TIG-TRICATHODE + LASER ROFIN SINAR 6 KW

Flush cut and stepped end tuber with belt snatching system, 4 plies, foto cell, 0/2 or 4 colour tail end printer, area perforating system Available: at once

Tube length: 55 - 132 (165)cm Tube widht: 30 - 70 (80) cm 4 plies, photo cell, 2 colour tail end printer Available: at once

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg

SAHINLER TUBE OF GRINDERS TYPE PN 90 -Capaciteit 17-90 mm -Roll met 8 -Hoekinstelling -Documentatie PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

Bending capacity: Copper or brass tube: 54 x 4 mm Steel tube: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Hydraulic tube ST35: 54 x 4 mm Furniture construction tube: 54 x 3 mm Aluminium tube: 54 x 5 mm Gas pipe for piping: 1 1/2 " Maximum bending angle: 210° Engine power: 1,1 kW Voltage: 400 V Machine dimensions (W x D x H) without stand: 800 x 300 x 680 mm Approximate weight: 107 kg Scope of delivery: Bending segment 1/4 "G (Ø 13.72 mm) incl. counter rollers and race Bending segment 1/2 "G (Ø 21.3 mm) incl. counter rollers and race Bending segment 1 "G (Ø 33,7 mm) incl. counter rollers and race Bending segment 1 1/4 "G (Ø 42.25 mm) incl. counter rollers and race

4 plies, micro perforating units, web guide system, 2 colour tail end printer, photo cell for preprinted paper, tube packeting station

CESURBEND TUBE OF GRINDERS TYPE PN 90 -Capaciteit 17-90 mm -Roll met 10 -Hoekinstelling -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

3 Qty.1 Second-hand Tube Expander Unit Built: 2012 Model: ABO Tube diameter: 500 mm-2540 mm

Praezision tube Residual bestaend from the production of gas pressure cylinders Stainless steel, probably V2A or V4A Laenge each 6m The following dimensions should be available, exact quantities on request or on order. 3x20 7x23 4x28 1x40 Sale against bid either as a total length or by length or by meter Special price

Beer filler with KK

AYEL-TECH TUBE OF GRINDERS TYPE TT 76 -Capacity 16-76 mm -With 10 sanding roll -Adjustable grinding angle -Documentation -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

AYEL-TECH TUBE OF GRINDERS TYPE DD 90 -Capacity 17-90mm -With 10 sanding roll -Adjustable grinding angle -Documentation -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Technical data: -Bending performance mandrel bending -maximum Rohrdrm at 45 kg / mm² Ã? 60.3 x 3.2 mm -min tube diameter 20 mm -maximum bending angle 180 ° -Bending direction left + right -Modulus 7,8 cm³ -min. bending radius mid-tube 40 mm -maximum bending radius mid pipe 200 mm -Lift length 5000 mm -maximum bending speed infinitely adjustable up to 3 U/min -Drive 400 V / 4 kW -Space requirement approx. B 1400 x H 1500 X 8000 mm -Weight approx. 1200 kg -Automatic. Bending angle before eligibility - hand positioning adjustment, creep speed control

Outside diameter maximum: 42 mm Inside diameter maximum: 6 mm Pipe length maximum: 3000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm Tracto Technik - TUBOMAT 642 Tube bending center Ø 6 - 42mm bending / cutting / deburring / flairing MACH - ID 6326 Make: Tracto Technik Type: TUBOMAT 642 Max.Tube Ø    42 mm Min. Tube Ø     6 mm Max. Wall thickness       3 mm Max. Bending radius     180 mm Min. Bending radius      10 mm Max. bending length       3.000 mm Deburring attachment      Yes Sawing attachment          Yes Flair attachment               Yes Power                               1, ...

Outside diameter maximum: 50 mm Inside diameter maximum: 6 mm Pipe length maximum: 4500 mm Angle degrees maximum: 0 Wall Thickness: 3 mm Transfluid - DB 648K Tube bender Ø 50 x 4500 mm MACH - ID 6314 Make: Transfluid Type: DB 648K YOP: 1998 Max.Tube Ø   50 mm Min. Tube Ø    6 mm Max. Wall thickness     3 mm Max. Bending radius    125 mm Min. Bending radius     10 mm Max. bending length     4.500 mm Power      1,5 kW Number of tools      2 Dimensions Length      5.600 mm Width         800 mm Height     1.550 mm Weight     700 kg

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 0 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5428 MAKE        ROUNDO KUMLA SWEDEN TYPE          r-6 / z-60 YOP            1993 SPECIFICATIONS Horizontal and vertical          H + V Shaft Ø      100 mm Number of rolls       3 Resistance moment         56 CM³ Capacity flat         125 X 20 mm Capacity Tube        115 X 6 Ø x mm Capacity HEA-Profile       240 mm Working speed         7 mm/min. Control         PS/R DIMENSIONS Length        2000 mm Width  ...

Outside diameter maximum: 42 mm Inside diameter maximum: 6 mm Pipe length maximum: 3000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5390 MAKE        Tracto Technik TYPE          TUBOMAT 642 YOP            2008 SPECIFICATIONS Max.Tube Ø        42 mm Min. Tube Ø        6 mm Max. Wall thickness         4 mm Max. Bending radius       84 mm Min. Bending radius        2 mm Bending length           3000 mm Deburring attachment          yes Sawing attachment          yes Flair attachment       yes Power                  ...

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 0 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5001 MAKE         COMAC Italia TYPE           3055 YEAR          1990 SPECIFICATIONS Power       15 kW Horizontal / Vertical / or H + V        H + V Shaft Diameter ø     120 mm Roll diamter ø       400 mm Resistance moment Cm      333 Cm3 Capacity IPN      240 x 106 mm Capacity  HEB        120 x 114 mm Capacity Tube walltickness x Ø  139 x 5 mm Capacity Flatt         125 x 25 mm Hydraulic / Mechanical       Hydraulic Working speed M/Min.2.5 + 7.5  ...

Outside diameter maximum: 105 mm Inside diameter maximum: 0 mm Pipe length maximum: 300 mm Angle degrees maximum: 0 Wall Thickness: 60 mm CNC Brand: _Unknown / Other MACH-id   4141 MAKE       PBT Swiss TYPE         25 YEAR       1999 - 635 uur SPECIFICATIONS Hydraulic / Mechanical         Hydraulic Horizontal / Vertical / or H + V        Horizontal Shaft Diameter ø    105 mm Shaft length            300 mm Working speed M/Min.        1 - 24 M/Min Capacity IPN          120 x 2000 mm Capacity HEB      140 x 3500 mm Capacity Tube walltickness x Ø    60 x 1000 mm Capacity Flatt        80 x 8 x 1000 mm Power  &n ...

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 2000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm CNC Brand: Elgo MACH-id   4106 MAKE       Stierli Bieger Swiss TYPE         300 CN C YEAR        2001 SPECIFICATIONS Controll     ELGO Hydraulic / Mechanical      Hydraulic Throat      300 mm Press force         30 Ton Stroke       2000 mm Table size Length x Width    1250 x 850 mm Working speed      600 Hour DIMENSIONS Length       2785 mm Width        1600 mm Height       1400 mm- ex. SIEMENS very littl ehours- incl. universal tool package- incl. hand opperator button- incl ...

TUGRA ROHRAUSSCHLEIFER TYP TT 170 -Capaciteit 40-170 mm -Met 10 roll -Traploos adjustable snelheid -Hoekinstelling -Documentatie -400V DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)

Stepped end and flush cut tuber, 4 plies, 3 colour tail end printer, photo cell for preprinted paper, web guide units

OSTAS ROUND BENDING MACHINE TYPE SMR 1070 x 96 - Capaciteite 1070 x 3 mm - Conisch walsen - Pathdraaibare bovenrol - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

219mm x 15mm Nanjing API Pipe Plant Year: 2021, Pipe Diameter: 101mm – 219mm, Wall Thickness: 2.75mm – 15mm, Pipe Length :4.2m – 16m, Yield Strength: 63.4Kg/cm2 (max), Line Speed: 10 – 30 meters per minute, Direction: Right to Left, Continuous Operation with Accumulator, Approximate Annual Production: 127,000 ton / year. Coil Car, Uncoiler, Straightener, Shear & Welder, Horizontal Accumulator, Forming Mill with Universal Drives, Individual Gear Boxes, 1,000Kw High Frequency Welder, Outside and Inside Bead Removal with Scrap Winder, Ultrasonic Tester, Cooling Section (Air and Water), Sizing Mill with Universal Drives, Individual Gear Boxes, Turk Heads, Flying Rotary Cut Off Saw, Run Out Conveyor, Straightening Machine, End Facing Machine, Automatic Packaging Line, Tooling, Spare Parts

3″ x .125″ Oto Mills – Someron HF Tube Mill Make (Entry Section): Oto Mills, Make (Forming & Sizing): Somenor, Maximum Pipe Diameter: 76mm, Wall Thickness: 0.8mm – 3mm, Shaft Diameter: 60mm Direction: Right to Left. Abbel Jib Crane, Mandrel Uncoiler, Weight Capacity: 10,000Lb, Powered Mandrel Expansion. Automatic Shear & End Welder, Hydraulic Shear, Automated Torching Head, Vertical Otto Mills Accumulator with DC Motor Drive, Driven Entry & Exit Guiding Rolls, Driven Entry Pinch Rolls, Adjustable Edge Guides, 5-Roll Coil Flattener. Forming Mill with Six Forming Stands, Seven Side Stands, Individual Gear Boxes, Universal Drive, Complete Set of Second Rafted Forming Stands, Motor: 60HP DC Drive. Welding Section with Emmedi 200Kw High Frequency Welder, 3-Roll Mechanical Squeeze Box, ID Scarfing Head, Powered Bead Re-Winder, Extended Cooling Section. Sizing Mill with Four (4) Sizi ...

76mm x 6mm Oto Mill HF Tube Mill Make: Oto Mill, Year New: 2005, Tube Diameter: 15mm – 76mm, Wall Thickness: 1mm – 6mm, Shaft Diameter: 100mm, Speed: 140 mpm, Direction :R-L. Double End Uncoiler with Coil Car, Crop Shear & TIG End Welder, Vertical Accumulator with 80Kw DC Drive, Forming Mill with Seven Forming Stands, and Seven Fin Passes, 110Kw DC Drive, and 70Kw DC Drive, Welding Section with 350Kw HF Thermatool Welder, Adjustable Sqeeze Box, Inside and Outside Scarfing Head, Bead Re-Winder, Cooling Section, Sizing Mill with Four Sizing Stands, and Four Fin Passed, Four Double Sided Turk Heads, 110Kw DC Motor, Friction Type Flying Cut-Off Saw with 74Kw DC Drive, Run Out Conveyor, and Table. Updated Electrics, LCD Display Controls, Hydraulics

Pipe end notching machine make PEDI type Gr. IIITool receiving width: 280 mmmax. pipe diameter 90 °: 90 mmwith notch 45 °: 50 mmCurrently equipped with maximum number of tools: 3 toolsTool size: 50 to 50 mmTool size: 45 to 50 mmTool size: 3/4 to 3/4 Diameter of the eccentric shaft: 70 mmDrive power: 2.2 kWWeight: 750 kgExternal dimensions L x W x H: 800 x 1000 x 1650 mmWith- additional tools:46 to 50 mm, 1 to 1- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools