tube heat exchanger used for sale

little used pipe punch Italian production 10 HP power.

Mingori bending table mounted on a trolley, to make it mobile on site, can bend DN 15 and DN 20 pipe in lengths of 3000 mm. very little used material. (a few months after its purchase in 1990)

The machine includes a large number of tools and spare parts - a list on request. The technical documentation in CZ / EN / DE language is a matter of course. Tour possible by prior arrangement.

LANG 85 bending machine Instrumentation on fi 60.3, additional wheel on fi 80, In constant use, very good condition, added hydraulics of the pipe holder, the mandrel extends automatically, which improves the quality of bending

Akyapak 38 mm tube bending machine Max. tube diameter : 38 mm Tools are included(10 pieces)

BLM 63 Tube Bending Machine Machine is in good condition

Outside diameter maximum: 0 mm Wall Thickness: 0 mm Pipe length maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Manual bending device: Tube: Diameter: 42 mm Wandstärke: 2 mm Max. bending angle: 185 ° Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 500 kg Overall dimensions machine: Length: 3060 mm Width: 1025 mm Height: 1078 mm

Pipe shaping machine 6 automatic steps Complete with dies for both straight and curved head machining For copper pipes diam 14-18-22

Inv. Num. : 5725 Type: A 89 TNCB Producer: CSM Created: 2014 Parameters: Maximum bending angle: 180 pcs Total power requirement: 15 kW The largest profile: 60x60x6 mm bending radius in the middle of the tube: 350 mm bending radius in the middle of the profile: 300 mm Machine height: 1200 mm Machine length: 4700 mm Machine width: 1200 mm Machine weight: 2500 kg

OSTAS ROUND BENDING MACHINE TYPE SMR 1070 x 96 - Capaciteit 1070 x 3 mm - Conisch walsen - Wegdraaibare bovenrol - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Yoghurt Filling and Capping Machines, In our machine, where you can choose two options, full automatic and manual, the cups are automatically dropped into the molds at the first station. Then, it is filled in by adjusting the weight in the setting weight field, it automatically puts foil on it, the foil is being sealed at top of it.

tube bending machine The machine is located in Spain. Year manufactured is 2005

Unbek. Type, YOC ca. 1990, Revision 2002 Specifications: - Bending capacity at 45 kg / mm² up to approx. Ø 25 x 3 mm - Bending angle left + right selectable - Hydr. Double-sided bending function - Hydr. Delivery ° - Drive 400 V / 11 kW - Space requirement approx. W 1750 x H 2200 x D 2300 mm - Weight approx. 1600 kg - with - bending angle adjustment - Hydr. Voltage - Bending tools

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 0 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id   3982 MAKE      SPIRO TYPE       1600 S YEAR       80 er SPECIFICATIONS Maximum sheet thickness Steel   1,3 mm Maximum sheet thickness  Alu    1,3 mm

Outside diameter maximum: 0 mm Inside diameter maximum: 4 mm Pipe length maximum: 6000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm CNC Brand: _Unknown / Other MACH-id  353 MAKE  BLM Italia TYPE   63 CNC YEAR   90 er SPECIFICATIONS Controll  CNC Control Hydraulic / Mechanical   Hydraulic Capacity Ø x plate thickness  63 x 4 ,0 mm mm Cutting lenght  L = 6000 mm DIMENSIONS Length   8500 mm Width   2 500 mm Height  1700 mm

Outside diameter maximum: 42 mm Inside diameter maximum: 6 mm Pipe length maximum: 01 mm Angle degrees maximum: 0 Wall Thickness: 0 mm SPECIFICATIONS Capacity Ø x plate thicknessTube 6 - 42 mm mm- incl. internal & external deburring- incl. sawing unit- incl. large tooling package  

MAX. OUTER TUBE DIA. 85 MM

Akyapak ABM 76 CNC Tube Bending Machine Machine never used Max. tube Ø : 76 mm

32mm x 2mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2002 Tube Diameter 10mm – 32mm Wall Thickness: 0.7mm – 2mm Speed: 180 mpm Direction: R-L Coil Weight: 3 ton Entry Coil Car Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 50Kw Motor & Drive Finn Passes with 35Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 50Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls

42mm W/E HF Tube Mill Make: Won Engineering (Korea) Year New: 2008 Diameter: 10mm – 42.7mm Square Sizes: 12mm x 12mm – 18mm x 18mm Pipe Length: 5m – 8m Line Speed: 120 meters per minute Dual Mandrel Uncoiler Cage Type Accumulator Forming Mill with 100Kw DC Drive 150Kw High Frequency Welder Cooling Section Sizing Mill with 100Kw DC Drive Flying Cut-Off Saw with 7.5Kw Motor Run Out Table Dumping Table Electrics, Hydraulics, Controls, Lots of Tooling

50mm x 4mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2003 Tube Diameter, 12.7mm – 51mm Wall Thickness: 0.8mm – 4mm Speed: 160 mpm Direction: L-R Coil Weight: 5 ton Entry Coil Car Double Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 70Kw Motor & Drive Finn Passes with 45Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 70Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls

63mm x 2mm AEF / Thermatool ERW Tube Mill Make: AEF (American Electric Fusion) Tube Diameter: 15mm – 63.5mm Material Thickness: 0.5mm – 2mm Tube Length: 6 meters Double Mandrel Uncoiler Entry Shear & End Welder TIG Power Supply Vertical Accumulator Make: Kent Driven Entry and Exit Pinch Rolls Strip Guiding Unit Forming Mill Individual Gear Boxes Universal 50HP DC Motor Six (6) Forming Stand Five (5) Side Stands Welding Section Make: Thermatool Type: Vacuum ERW Design Power: 200Kw Mechanical Welding Head Beat Removing Head with Winder Cooling Tank & Pump

63mm x 3mm Oto Mills HF Tube Mill Make: Oto Mills, Model: 552, Tube Diameter: 10mm – 63.5mm, Material Thickness: 0.8mm – 3.2mm, Line Direction: Left to Right. 10,000Lb Double End Uncoiler & Coil Car, Automatic Coil Joiner, Vertical Accumulator, Coil Straightener, Forming, Fins, Sizing Sections, 70mm Shaft Diameter, Three (3) 100HP Motors and Drives, Coolant Section, 30Kw Thermatool HF Welder, Three (3) Turk Heads, Spare Rafted Stands, Run Out and End Tables, Tooling

76mm x 6mm Oto Mills HF Tube Mill Year New: 2005, Tube Diameter, 12mm – 76mm, Wall Thickness: 1mm – 6mm, Speed: 140 mpm , Direction: L-R, Coil Weight: 10 ton. Entry Coil Car, Double Mandrel Uncoiler, Automatic End Joiner, Vertical Accumulator, Coil Straightener, Forming Mill with 110Kw Motor & Drive, Finn Passes with 70Kw Motor and Drive, 300Kw Thermatool HF Welder, Cooling Section, Sizing Mill with 110Kw Motor & Drive, Turk Head Stands, Flying Cut-Off Saw, Run Out Conveyor and End Table, Tooling for Round and Profiles, Electrics, Hydraulics, Controls

8″ x .220″ GSI HF Tube Mill Year: 2000, Diameter: 1.5″-8″, Wall Thickness: .050″-.220″, Shaft Diameter: 125mm, Speed: 20-40 meters per minute, Coil Width: 148mm-990mm, Coil Weight: 5,000Lb, Product: Round, Square, Rectangular. Double Mandrel Uncoiler, Shear & End Welder, Cage Type Accumulator, Forming Mill with 210Kw DC Motor, 300Kw High Frequency Welder, Sizing Mill with 125Kw DC Motor, Two (2) Turk Heads, Flying Cut-Off Saw, Run-Out Table & Conveyor. Lots of Tooling, Electrics, Hydraulics, Controls

Manual pipe clinker make ALMI type A 2for notching tools of 1 = 34.8 mmWith- Hand leverusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Automatic tube filling and sealing machine for PE and laminate tubes including: - Format set D.19 and D.35 - Tube magazine for empty tubes - automatic tube orientation - Hot air sealing unit Leister - Coding device on the tube fold on one side - water-cooled sealing jaws - cooling of the weld seam with cold air gun - Siemens PLC - 50L product hopper

Specifications: - Bending performance - Pipe at 45 kg / mm² Ø 6 - 48 mm - Solid material up to approx. 30 mm - bending angle 180 ° - Bending radius 2 x D - Drive 400 V / 1.5 kW - Space requirement approx. W 4500 x H 1400 x D 1000 mm - Weight approx. 600 kg - with - Digital bending angle display + bending angle fine adjustment - Mandrel bending device 4.5 m. with hydr. Retreat - Bending tools 16 , 25 , 20 , 33.7, 38 mm - Bending blade 3000 mm

Hand-hydraulic tube bending machine with hinged bending frame for pipe Ø: 3/8 - 3"

CRIPPA CNC YEAR 2007 LOW WORKING HOURS INCLUDED TOOLINGS AND EQUIPMENT WE ORGANIZE FOR CLIENT AS WELL TRANSPORT

190° maximum 114.3x3.6mm/3.5 max. tube 30kw L1, L2, L3 + N +PE Dimensions: 10 x 1.7 x 1.8 m Weight: approx. 14 tons Oil: 400 liters of GALP HIDROLEP 46 type oil Various tools on request (1/2,3/4,1 and 2) Good condition

Automatic inspection machine 100% inspection for the groove, length, hole (ex. Diameter 9,5mm,ID, length 51,5mm Including rotary feeder Manual available Machine is available to see running Video available

- Guide tube MWM 12135199 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies an ...

Tube filling machine,stainless steel,manual,max 3300 ml.

Used BLM PR 35 D Tube bending machine with drilling units Year 1995 visible in Italy

The machine is in working order and has many accessories Programmable up to 10 folds. dies up to 50 mm Matrices of: 20, 25, 30 and 50

Grinding diameter: Ø20 - Ø76.1 mm Grinding angle: 30º – 90º Belt speed: 30 m/s, 2800 rpm. Belt dimensions: 100 × 2000 mm Operation: Lever and manual wheel operation Included roll: Ø48.3 mm Motor: 3 kW Country of origin: Netherlands Machine LxWxH: mm Machine weight: 210 kg This machine is unused!

Machine in good technical condition, after agreement possibility of testing. Weight 1530 kg.

The machine is in good technical condition, it is possible to test it by agreement. Parameters: Maximum pipe diameter: 40 mm Maximum pipe wall thickness: 2 mm Total power: 4.6 kW Machine height: 1120 mm Machine length: 4450 mm Machine width: 800 mm Machine weight: 1100 kg

Pipe cutting machine Length 2950mm. Width 1670mm. Height 2350mm. Control voltage 24VDC 230VAC. Rated current 32A. Total power 18kW. Weight 3000kg. Noise level 75dB.

Machine weight: 20500 kg Max. bend length: 5000 (custom extended machine) mm Max. collet diameter: : 102 mm Max. bending capacity:: D 102, Rmax = 400 mm Min. bending inner radius:: 65 mm

AEG / AVITEQ vibrating tube ( only 3 pieces ) 2 x : Length 3000 mm - Diameter 500 mm with two vibration motors of 1.3 kW each 1 x : Length 5900 mm - Diameter 500 mm with two vibration motors of 2.3 kW each

The machine is fully functional, with a rich set of tools. Pipe bending tools: fi 83 - R300 fi 88.9 - R300 fi 101.6 - R250, R400 fi108 - R450 fi 114.3 - R550 fi 133 - R400 fi 137 - R500 fi 168 - R700 fi 193 - R600 fi 219 - R640, R800

Used BLM DINAMO 0 Tube bending machine Visible in Italy Videos available 2002

IWK FP10 TUBE FILLING MACHINE. CAPACITY 70 TUBES PER MIN tooling supplied d25 x 170 setup for metal tubes as new condition

Approx. Onsite Dimension. (l x w x h): 250 x 200 x 700 mm, weight approx.: 3 kg

New glass bottle depalletizer type: tube gripper including bottle table, discharge conveyor, rack, vacuum pump and elevator Top condition

Fully automatic high speed tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. The high number of cycles with up to 75 cycles per minute is achieved, among others, by using a timing belt drive instead of a timing chain. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Stamping characters for e.g. batch printing are integrated into the sealing jaw. Mitsubishi PLC, Weinview touch screen. - Specifications: max. speed of the machine in neutral: 75 cycles/minute (corresponds to: max. 150 tubes/minute) | filling range (one of the three ranges selectable): a) 5-25ml, b) 15-150ml, c) 30-200ml | accuracy: +/-1 ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun cream etc. Suitable for plastic and laminated tubes with prefabricated, closed lids. The filling machine has a no-tube-no-filling function. The dosing unit is included and is selected according to the product characteristics. Stamping characters for e.g. batch printing are integrated into the sealing jaw. Mitsubishi PLC, Weinview touch screen. - Specifications: max. speed of the machine in neutral: 50 cycles/minute (corresponds to: max. 100 tubes/minute) | filling range (one of the three ranges selectable): a) 5-25ml, b) 15-150ml, c) 30-200ml | accuracy: +/-1% | max. length of the tube: 200mm | tube diameter: 10-50mm (whereby one mould is required per tube diameter) | number of filling heads: 2 | storage hop ...

There are 40 identical tube fans available.