tube cutting machine used for sale

Aluminium tube rail chain conveyor, dimenisons room: 11000 mm x 3000 mm.

Aluminium tube rail chain conveyor, 15 lanes, dimenisons room: 6500 mm x 12000 mm and 6 lanes, dimenisions room: 8000 mm x 4000 mm.

: 40 mm roll diameter: 137 mm : 7 Upm engine output: 1,1 kW weight: 350 kg dimensions of the machine ca.: 1050 x 530 x 1250 mm Features: 2 rollers powered settings readout on scale easy reach emergency button supplied with standard roller set optional: various roller sets (available on request) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer : Cotuplas Model: S4 Type : Manual sealer for plastic tubes Applications Production of samples for demonstration Market research Production of tubes for small or medium production runs Laboratory testing, internal product compatibility Features S4 unit accepts tubes from 13.5 mm to 60 mm in diameter and up to 230 mm in length Manual production speed of up to 240 tubes per hour Adjustable timer from 0 to 30 seconds to meet sealing requirements The tube is positioned between the sealing jaws by the operator Tube positioning device ensures process repeatability and seal quality (missing parts, planned installation) 3.5 mm high jaws maintain pressure while sealing Spring-loaded jaws open effortlessly with a lever Consumption water : 100 L / h electrical : 400 W

Manufacturer : Aximatic srl Model: Optima 900 Matic Year : 1998 Type : Plastic tube filler Max capacity : 70 units / min Dosing range : 2 ml - 300 ml Max tube length : 280 mm with cap Tube diameter: 10 mm - 60 mm Power : 7 KW Current: 18 A

Manufacturer: Norden Model: NM 250 HA Year: 2003 Type: Hot air plastic tube filler / sealer Max capacity : 25 units / min Transport chain : 14 buckets Empty tube feeding : manual Tube printing centering 20 L hopper HA hot air device Ribbed or smooth sealing 1 side coding: 6 characters Verification check: no tube - no filling Available formats. Cutting recovery: CFM R154V hoover ThermoChill I Recirculating Coolers General information Filling volumes: 1ml - 300ml. Diameter: 10 mm - 50 mm

pressure: 10 t stroke: 200 mm table-size: 450 x 450 mm working speed:: 10 mm/ sec. work height max.: 940 mm toolpiece height max.: 150 mm total power requirement: 1,1 kW : 150 x 6 mm weight: 0,4 t dimensions: 1,15 x 0,5 x 0,9 mm Horizontal bending machine with: - NC control - Dual footswitch - Set of standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vacuum lifting and transport system. Handling equipment for easy transport of boxes, crates, bags, packs, bundles, ... without effort. Gripping tool with 4 suction cups. Maximum weight: 35 kg Vacuum pump with insulating box. Jib crane Liftop brand. Height : 300 cm Maximum lift diameter: 400 cm.

4690 KW Tubetech Air Cooled Condenser ZBW-R-1F-4/1 Condenser from 2018, condenses up to 8 t/h steam, like new, was used as a steam condenser of a 1,500 KW turbine. complete (closed unit with control), 1 available, 4,690 kW, 1 fan. Manufacturer: Tubetech Model No.: ZBW-R-1F-4/1- 6550×2738-DCC63B8-4-1 Serial Number: 1381-1384 Type: Air Cooled Condenser/Steam Condenser Fans: 1 Power [kW]: 4,690 Year of construction: 2018

Manufacturer:-- Model: -- Plastic tube filler Frequency: 50 Hz Price: on request

Cat. No. 07-109-3 in very good condition Standard: Manufacturer NEUMO Type DUPLEX 80/100 Operating/temperature 90C Maximum operating pressure 10 bar Adjustable V2A - Frame Heat conduction inside NW 50 Heat conduction outside NW 100 Product management NW 80 with 7 tubes x 6 m long without measuring technology and connections Dimensions and weight: Length: 620 cm Height: 140 cm Depth/width: 70 cm Weight: 755 kg For inquiries: Tel: 09353 90905-0 Fax: 09353 90 90 5-22 or 0171 651 8248 We also have other winery machines - request our complete catalogue! All prices ex works plus law VAT Intermediate sale reserved! Delivery time: immediately from stock The price quoted is only valid for 1 piece

Automatic tube cutting machine using a SIMEC saw cutter, Mec 120 M CNC model, designed for cutting metal or non-ferrous tubes with a diameter of 12 mm minimum to 100 mm maximum, round, square or rectangular section. Managed by Siemens S7 automaton and industrial PC with Galiléo” software with calculator and cutting optimization (angle or straight). Automatic loader, inclined plane type for bars up to 6.5 M Automatic feed by feed clamp driven by brushless motor: speed: 1M/s Automatic head rotation + - 60° for angle cuts Unloading of cut pieces (max: 2000mm): 2 positions

ADIGE TT640 automatic tube cutting machine Adige saw model TT 640. Straight cuts only, for steel or non-ferrous tubes with a diameter of 15 to 80 mm. Equipped with an automatic strap loader for bars up to 6m50. Unloading for lengths 2000mm max. In perfect working order. Delivery and installation possible

Paper tube length/ diameter: 1000-1600/ 20-160mm, connected load: 1.5kW, length: 4600mm, width: 1500mm, height: 1400mm, weight: 680kg, with instruction manual.

Used Trumpf TLF2400 tube laser cutting machine In perfect working order, still in production possibility to see it under power

• Tube advance by pressure rollers, adjustable feed speed from 0 to 200meter / minute • Automatic loading by inclined plane Lg 6000mm • Double clamping jaws adjustable in pressure • Automatic sprinkler lubrication • Chainsaw head mounted on a double column, with possible backlash adjustment (head redone in 2019), with manual rotation of the cutting head. • Blade rotation speed 50/100 revolutions / minute or 25/50 revolutions per minute. • Maximum blade diameter 350

Working hours laser on: 32824 h Working hours beam on: 28572 Laser power: 3000 kW Max. steel: 8 mm Max. stainless steel: 5 mm Max. aluminium: 6 mm Max. copper: 4 mm Max. brass: 4 mm Length: 18000 mm Width: 9000 mm Height: 2800 mm Machine weight: 21000 kg max. tube length: 6500 mm max. length finished parts: 4500 mm max. tube diameter: 152 / 170 mm min. tube diameter: 12 mm max. tube weight: 25 kg/m

Bending semi-automatic, tube bending machine, mandrel bending machine MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Fabr. No. 056 Year of manufacture 09/2004 - for simultaneous bending of two steel pipe sections up to 12 mm bending angle max. 90 Tube diameter max 12mm Mandrel length approx. 65 mm Nominal power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Mains connection 400 volts, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STOBER Controlbox Series 4000/5000 - Control SIEMENS S7-200 with display TD200 - Machine without bending tools and without tool bearing bolt 25 x 183 mm - only 1 bending mandrel available (see pictures). Space requirements L x W x H 1000 x 1000 x 1500 mm Weight 390 kg good condition; used

Brush deburring machine, tube deburring machine ERINI type 250 Year of manufacture approx. 1995 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm. Power 2.2 / 2.8 kW Mains connection 380 volts, 50 Hz - Material support - new deburring brush - Extraction connection 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition; used

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg

SAHINLER TUBE OF GRINDERS TYPE PN 90 -Capaciteit 17-90 mm -Roll met 8 -Hoekinstelling -Documentatie PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

Bending capacity: Copper or brass tube: 54 x 4 mm Steel tube: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Hydraulic tube ST35: 54 x 4 mm Furniture construction tube: 54 x 3 mm Aluminium tube: 54 x 5 mm Gas pipe for piping: 1 1/2 " Maximum bending angle: 210° Engine power: 1,1 kW Voltage: 400 V Machine dimensions (W x D x H) without stand: 800 x 300 x 680 mm Approximate weight: 107 kg Scope of delivery: Bending segment 1/4 "G (Ø 13.72 mm) incl. counter rollers and race Bending segment 1/2 "G (Ø 21.3 mm) incl. counter rollers and race Bending segment 1 "G (Ø 33,7 mm) incl. counter rollers and race Bending segment 1 1/4 "G (Ø 42.25 mm) incl. counter rollers and race

CESURBEND TUBE OF GRINDERS TYPE PN 90 -Capaciteit 17-90 mm -Roll met 10 -Hoekinstelling -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Outside diameter maximum: 42 mm Inside diameter maximum: 6 mm Pipe length maximum: 3000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm Tracto Technik - TUBOMAT 642 Tube bending center Ø 6 - 42mm bending / cutting / deburring / flairing MACH - ID 6326 Make: Tracto Technik Type: TUBOMAT 642 Max.Tube Ø    42 mm Min. Tube Ø     6 mm Max. Wall thickness       3 mm Max. Bending radius     180 mm Min. Bending radius      10 mm Max. bending length       3.000 mm Deburring attachment      Yes Sawing attachment          Yes Flair attachment               Yes Power                               1, ...

Outside diameter maximum: 50 mm Inside diameter maximum: 6 mm Pipe length maximum: 4500 mm Angle degrees maximum: 0 Wall Thickness: 3 mm Transfluid - DB 648K Tube bender Ø 50 x 4500 mm MACH - ID 6314 Make: Transfluid Type: DB 648K YOP: 1998 Max.Tube Ø   50 mm Min. Tube Ø    6 mm Max. Wall thickness     3 mm Max. Bending radius    125 mm Min. Bending radius     10 mm Max. bending length     4.500 mm Power      1,5 kW Number of tools      2 Dimensions Length      5.600 mm Width         800 mm Height     1.550 mm Weight     700 kg

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 0 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5428 MAKE        ROUNDO KUMLA SWEDEN TYPE          r-6 / z-60 YOP            1993 SPECIFICATIONS Horizontal and vertical          H + V Shaft Ø      100 mm Number of rolls       3 Resistance moment         56 CM³ Capacity flat         125 X 20 mm Capacity Tube        115 X 6 Ø x mm Capacity HEA-Profile       240 mm Working speed         7 mm/min. Control         PS/R DIMENSIONS Length        2000 mm Width  ...

Outside diameter maximum: 42 mm Inside diameter maximum: 6 mm Pipe length maximum: 3000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5390 MAKE        Tracto Technik TYPE          TUBOMAT 642 YOP            2008 SPECIFICATIONS Max.Tube Ø        42 mm Min. Tube Ø        6 mm Max. Wall thickness         4 mm Max. Bending radius       84 mm Min. Bending radius        2 mm Bending length           3000 mm Deburring attachment          yes Sawing attachment          yes Flair attachment       yes Power                  ...

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 0 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5001 MAKE         COMAC Italia TYPE           3055 YEAR          1990 SPECIFICATIONS Power       15 kW Horizontal / Vertical / or H + V        H + V Shaft Diameter ø     120 mm Roll diamter ø       400 mm Resistance moment Cm      333 Cm3 Capacity IPN      240 x 106 mm Capacity  HEB        120 x 114 mm Capacity Tube walltickness x Ø  139 x 5 mm Capacity Flatt         125 x 25 mm Hydraulic / Mechanical       Hydraulic Working speed M/Min.2.5 + 7.5  ...

Outside diameter maximum: 105 mm Inside diameter maximum: 0 mm Pipe length maximum: 300 mm Angle degrees maximum: 0 Wall Thickness: 60 mm CNC Brand: _Unknown / Other MACH-id   4141 MAKE       PBT Swiss TYPE         25 YEAR       1999 - 635 uur SPECIFICATIONS Hydraulic / Mechanical         Hydraulic Horizontal / Vertical / or H + V        Horizontal Shaft Diameter ø    105 mm Shaft length            300 mm Working speed M/Min.        1 - 24 M/Min Capacity IPN          120 x 2000 mm Capacity HEB      140 x 3500 mm Capacity Tube walltickness x Ø    60 x 1000 mm Capacity Flatt        80 x 8 x 1000 mm Power  &n ...

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 2000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm CNC Brand: Elgo MACH-id   4106 MAKE       Stierli Bieger Swiss TYPE         300 CN C YEAR        2001 SPECIFICATIONS Controll     ELGO Hydraulic / Mechanical      Hydraulic Throat      300 mm Press force         30 Ton Stroke       2000 mm Table size Length x Width    1250 x 850 mm Working speed      600 Hour DIMENSIONS Length       2785 mm Width        1600 mm Height       1400 mm- ex. SIEMENS very littl ehours- incl. universal tool package- incl. hand opperator button- incl ...

AYEL-TECH TUBE OF GRINDERS TYPE TT 76 -Capacity 16-76 mm -With 10 sanding roll -Adjustable grinding angle -Documentation -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

AYEL-TECH TUBE OF GRINDERS TYPE DD 90 -Capacity 17-90mm -With 10 sanding roll -Adjustable grinding angle -Documentation -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Technical data: -Bending performance mandrel bending -maximum Rohrdrm at 45 kg / mm² Ã? 60.3 x 3.2 mm -min tube diameter 20 mm -maximum bending angle 180 ° -Bending direction left + right -Modulus 7,8 cm³ -min. bending radius mid-tube 40 mm -maximum bending radius mid pipe 200 mm -Lift length 5000 mm -maximum bending speed infinitely adjustable up to 3 U/min -Drive 400 V / 4 kW -Space requirement approx. B 1400 x H 1500 X 8000 mm -Weight approx. 1200 kg -Automatic. Bending angle before eligibility - hand positioning adjustment, creep speed control

Pipe end notching machine make PEDI type Gr. IIITool receiving width: 280 mmmax. pipe diameter 90 °: 90 mmwith notch 45 °: 50 mmCurrently equipped with maximum number of tools: 3 toolsTool size: 50 to 50 mmTool size: 45 to 50 mmTool size: 3/4 to 3/4 Diameter of the eccentric shaft: 70 mmDrive power: 2.2 kWWeight: 750 kgExternal dimensions L x W x H: 800 x 1000 x 1650 mmWith- additional tools:46 to 50 mm, 1 to 1- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

TUGRA ROHRAUSSCHLEIFER TYP TT 170 -Capaciteit 40-170 mm -Met 10 roll -Traploos adjustable snelheid -Hoekinstelling -Documentatie -400V DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)

OSTAS ROUND BENDING MACHINE TYPE SMR 1070 x 96 - Capaciteite 1070 x 3 mm - Conisch walsen - Pathdraaibare bovenrol - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Original MINGORI® Model OB40 - Mobile hydraulic tube bending machine with manually operated hand pump, suitable for bending pipes according to DIN, API and ASA standard, as well as coated PE-HD pipes. The machine works in the compression bending process. The greatest surmountable material resistance torque that can be overcome with the machine is about 28 cm³. Maximum bending force 18 tons Maximum bendable pipe diameter 88.9 mm Smallest possible bendable pipe diameter 17.2 mm Smallest bending radius depending on the radius of the bending punch from 46.5 mm to 330 mm Smallest bending angle 110° (this machine also available for bending angles up to 180°) Weight of the basic machine approx. 140 kg The machine is delivered in a storage chest – Dimensions of the chest approx. 102 x 32 cm x H 41 cm Weight basic machine 140 kg With electrically operated hand pump (as mo ...

Technical data: - Bending capacity - steel pipe of 20 - 60 x 4 mm - - stainless steel pipe of 20 - 50 x 3 mm - max. resistance moment 6.2 cm - max bending angle 180° - max radius 125 mm - Bending speed 8 sec - Drive 400 V / 3 kW - Space requirement approx. L 2400 x H 1600 x D 1000 mm - Weight approx. 1400 kg - with: - Bending angle control via potentiometer with digital display - 6-fold bending angle preselection - Indoor + external pipe deburrer - Bending tools Rx2.5D x 38 ; • 50 , 65 ;

Tube filling and closing machine for metal tubes incl. - Empty tube magazine - Automatic tube orientation - Closing stations for single or double folds - 1 pc. format parts for Tube D.40 - mechanical capacity up to max. 80 tubes / min. Machine has to be refurbished self-directed.

Key data: 32 mm, 2 mm

Inv. Num. : 6997 Type: CMH 32 NC Producer: Cansa Generated: Parameters: Maximum tube diameter: 32 mm Maximum pipe wall thickness: 2 mm Maximum bending angle: 1900 st Power consumption: 4.4 kW Mandrel length: 2000 mm Max pressure: 120 bar Equipment: Hydraulic clamping Hydraulically controlled mandrel Hydraulic collet Colour touch screen Display of the current position of the pipe on the monitor (displacement and rotation) Display of the daily production on the screen of the control system Display error messages on the control system screen Saving created programs in the memory of the control system Ability to store up to 100 bending programs

Unipac Silver 80 automatic plastic tube filling machine. The machine is well suited for packaging pharmaceutical, chemical, cosmetic, food, etc. products. Manufacturer: Unipac srl Italy Type: Silver 80 Year of production: 1988 Automatic cassette-type feeder for tubes Material: Stainless steel Funnel with stirrer Tube sealing (hot jaw) Various exchange format sizes Electricity: 380 years, 50 Hz Weather: 6 bar The machine is in good working order

Tube filling and sealing machine for PE, laminate and metal tubes Power up to 3,700 tubes /hr depending on

Crippa tube bending machine 955LE CNC tube CNC tube bender Ø30 x 2 mm (max. Ø55 mm) - Tube wall thickness – 2.0 mm (max. 2.5 mm) - Tube material - steel - Bend radius 72, 90, 100, 150 mm (max. 250 mm) - 3-axis bending It was never working – new, but the production year ca. 2015

Semi-automatic tube filling and closing machine for metaltubes including: - Tube D.35 format set - Coding device on one side - Tube feeder and tube alignment by hand

Tube filling machine,stainless steel. 375 ml.

Tube filling machine,stainless steel,Gasti,for metal tubes,with variable speed,0-100 ml.

Tube filling machine,stainless steel,IWKA TU 60,for plastic and metal,tubes max 350 ml dosage.