We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
124,778 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
The machine is in good technical condition, it is possible to test it by agreement. Parameters: Maximum pipe diameter: 40 mm Maximum pipe wall thickness: 2 mm Total power: 4.6 kW Machine height: 1120 mm Machine length: 4450 mm Machine width: 800 mm Machine weight: 1100 kg
used
Pipe cutting machine Length 2950mm. Width 1670mm. Height 2350mm. Control voltage 24VDC 230VAC. Rated current 32A. Total power 18kW. Weight 3000kg. Noise level 75dB.
used
Machine weight: 20500 kg Max. bend length: 5000 (custom extended machine) mm Max. collet diameter: : 102 mm Max. bending capacity:: D 102, Rmax = 400 mm Min. bending inner radius:: 65 mm
used
The machine is fully functional, with a rich set of tools. Pipe bending tools: fi 83 - R300 fi 88.9 - R300 fi 101.6 - R250, R400 fi108 - R450 fi 114.3 - R550 fi 133 - R400 fi 137 - R500 fi 168 - R700 fi 193 - R600 fi 219 - R640, R800
used
Used BLM DINAMO 0 Tube bending machine Visible in Italy Videos available 2002
used
Hydraulic tube bending machine. -4 bending jigs, incl 4 pressure pieces. -Sizes of bending jigs: -Round 20-R67. -Round 22-R67. -Round 25.4-R82. -Round 30-R112. -Mobile.
new
: neu : ca. 12 - 14 Wochen ab Auf : Italien : 64000 € : 1299.2 € : 4535 mm : 1145 mm : 1400 mm : 1488 kg : 18 cm³ : 76 x 3,6 mm : 76 x 2,3 mm : 70x70x3 mm : 70x50x3 mm : 70x50x6 mm : 76 mm : 200 mm : 10 mm : 195 ° : 1,5/3 (50/100Hz) : 3 kW : 50 l Three-phase NC electric-hydraulic mandrel bending machine up to 76 mm with 1 controlled axis (bending axis C) New TCPlus control • 7” colour touch screen • Icons for ease use • Automatic mode, manual mode, programming mode • Advanced OFFSET function • Easy language change • Auto-tuning of the main machine components • Programmable bending speed for each single bend of the program • Unlimited programs possibility (USB port) • Every program can contain up to 30 different bends • Available extensions of 2 meters each (optional) • Tie bar (optional - art. TB80-TI) The data for this ad was created with ModulMWS - the so ...
new
: neu : ca. 12 - 14 Wochen ab Auf : Italien : 35300 € : 723.65 € : 4000 mm : 950 mm : 1250 mm : 850 kg : 10 cm³ : 64 x 3,3 mm : 2 mm : 60,3 x 2,2 mm : 60 x 60 x 2 mm : 40 x 60 x 4 mm : 60 x 40 x 3 mm : 76 mm : 200 mm : 20 mm : 210 ° : 4,2 kW : 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending speed up to ...
new
: neu : ca. 12 - 14 Wochen ab Auf : Italien : 29300 € : 600.65 € : 4000 mm : 950 mm : 1250 mm : 430 kg : 6 cm³ : 50 x 3,31 mm : Ø 1”1/4 mm : Ø 50 x 2,5 mm : 40 x 40 x 4 mm : 25 x 50 x 6 mm : 50 x 25 x 2,7 mm : 60 mm : 200 mm : 20 mm : 210 ° : 1,25 / 2,5 : 3,5 kW : 15 l With mandrel 3 m length Can be used with or withoud mandrel Two bending speeds Programmable bend sequencing and mandrel retraction Independent clamp and pressure die adjustment Micrometer wiper die adjustment Auxiliary system for stabilizing the hydraulic slide pressure Quick tool change system With pneumatic material clamping and DRO system for linear and rotational positioning ALTERNATIVELY: model with mandrel 6 m length price on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The machine is in working order and has many accessories Programmable up to 10 folds. dies up to 50 mm Matrices of: 20, 25, 30 and 50
used
Tubebending machine for tube: dia 6 gt; 48 mm for full material: max 30 mm Max dia tube x thickness: Ø 6 > 48 mm (45 kg / mm²) Max bendingradius: 180° Length: 5500 mm Depth: 1400 mm Height: 1000 mm Weight: 600 kg
used
Hand tube bending device, hand tube bender set, pipe bender DAKO Model 247 Ø 15 5 - 18 - 22 mm maximum bending angle: 180 degrees with 3 bending segments in metal case used, tested ! Dimensions ( metal case ): 675 x 325 x 90 mm
used
Pipe bending tool, 3 parts PAGUS Ø 36 mm 1x 32x25 ( Ø 32 mm ) Dimensions: 212 x 61 x 85 mm 1x 25x2 ( Ø 25 mm ) Dimensions: 140 x 56 x 75 mm 1x Ø 17 mm Dimensions: 90 x 57 x 73 mm mount ( machine side ): Ø 36 mm, Depth: 35 mm used, checked ! Dimensions ( packaging ): 220 x 120 x 100 mm
used
Pipe bending tool, 6-piece PAGUS Ø 32 mm 1x GR 11/2 ( inches ) Dimensions: 205 x 110 x 82 mm 1x GR 1 ( inches ) Dimensions: 145 x 98 x 82 mm 1x GR 3/4 ( inches ) Dimensions: 118 x 90 x 82 mm 1x GR 1/2 ( inches ) Dimensions: 103 x 90 x 82 mm 1x GR 42 ( Ø 42 mm ) Dimensions: 247 x 100 x 82 mm 1x GR 20 ( Ø 20 mm ) Dimensions: 130 x 90 x 55 mm mount ( machine side ): Ø 32 mm, length: 82 / 55 mm used, tested ! Dimensions ( packaging ): 400 x 190 x 150 mm
used
Robotic industrial cell with BLM Dynamo-E tube bending machine Industrial cell consisting of: automatic bar feeder BLM CRMA7, Industrial robot Fanuc M16IB20, Tube bending machine BLM Dynamo-E year of manufacture 2007, machine number 200016, 2 handle conveyors, with photoelectric control, Resistance welding machine, Constructione Italy, PPN83, machine number QM328001, 2 resistance welders, Constructione Italy PPN83, Donation tape. The whole is fenced with networks controlled by Siemens with CE certification Link to the video – https://youtu.be/y5yYJQhkrRw
used
Key data: 60 mm, 2 mm
Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Turret: 12-way adjustment Mandrel length: 4500 mm Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 thorns - Mandrel retraction device - Foot pedal - Bending speed adjustment Country of origin: the Netherlands Motor power: 7.5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg
used
To offer mandrel bending machine with instrumentation. This is the PROVAR 6-90 U-D model Numerically controlled machine, 6 axes: - Y axis (bending): CNC automatic axis with servo drive + encoder - X axis (travel - straight section): automatic CNC axis with servo drive and resolver - Z axis (rotation): CNC automatic axis with servo drive and resolver - Axis B1 (positioner side shift) with servo drive and resolver - Axis B2 (pilot/stem sideshift) with servo drive and resolver - A axis (head travel) on the guide and ball carriage with servo drive and resolver useful length 5,800 mm - movable slider support - anti-crack cap support - early extraction of the stem with quick mounting of the stem carrier - automatic mandrel lubrication - safety mat 3x1m Tooling included. Tooling for pipe fi48.3 x 2.0mm inox RM 2.0 D + rollers Equipment for pipe fi60.3 x 2.0mm inox RM 2. ...
used
HAVEN mandrel bender for fi 65 NC tooling for the pipe fi 48.3 and fi 60.3, automatic lubrication and mandrel extension, length of the feed from the wheel approx. 5 m, excellent condition, used occasionally for bending fi 48.3 x 1.5 easy operation, possibility of setting several different bending angles, fast bending
used
Bending capacity (steel pipe) 100x6.0mm Bending radius range up to 500m Bending angle range up to 190 degrees Mandrel length 3000mm Bending speed up to 12 degrees/sec Bending accuracy +-0.2 degrees Engine power 25HP Machine dimensions 4500x2000x1750 Machine weight 3000kg The machine is used only for tests. It is in perfect condition.
used
Hydraulic cnc mandrel bender for pipes and profiles The rasi numerical bender for pipes and profiles ensures bending without deformation, distortion or change in diameter. The bent pipes retain their shape and the fitted mandrel prevents the formation of folds and deformations. Possibility of 3D mandrel bending from pipes with a diameter of 10 to 60 mm and profiles from 10x10 mm to 40x40 mm. Bending tools included: cylindrical: -profile 20x10 -profile 40x20 - pipe fi 10 - pipe fi 20 - pipe fi 30 - pipe fi 40 pin: -profile 20x10 -profile 40x20 - pipe fi 10 - pipe fi 20 - pipe fi 25 - pipe fi 30 - pipe fi 40 - pipe fi 17.2 - pipe fi 21.3 - pipe fi 26.9
used
SAHINLER HPK Series bending machines meet the requirements for bending profiles: rolled, extruded, extruded, drawn... whether they are steel, stainless steel, brass, aluminium... These machines provide high level performance with high precision and repeatability, consistently, for the entire duration of their use, requiring very little maintenance. This results in: structural oversizing of the parts subject to stress, the precision of the mechanical parts and the use of high quality off-the-shelf components. - set of 3 rollers made up of 12 flanges & spacers - three-way side corrector cylinders with hydraulic adjustment - 1 mobile console grouping together all the command and control devices. - 1 manometer. - Handling shackle — service keys - Use and maintenance manual in which the manufacturers EC declaration of conformity is inserted - Shaft diameter (mm): 160 - Diameter ...
used
130 pipe bending machine There are 8 types of molds for pipes and profiles, cnc 3 axis, 6 meters pipe processing capacity, 2008 model, self-winding brand, very solid and alive machine [130 mm diameter 5 mm thickness Can bend 60x60 10 mm profile can be bent easily
used
Specifications Ø tubes / radius in mm: Ø 22 / 67 Ø tubes / radius in mm: Ø 10 / 36
used
The bending machine is intended for bending installation pipes of all varieties: light, medium, heavy with diameters: 1 ½”; 2”, 2 ½”; 3, 3 ½; 4. Range of bending angles - up to 1800. Arches are bent cold. The bending cycle is semi-automatic, which facilitates high efficiency. The GH-4 bending machine has a hydraulic drive for the working movement and auxiliary movements. The bending of the pipe takes place on a cam while filling the most deformed pipe cross-section with a mandrel. The bending machine consists of the following mechanisms and assemblies: 1. driving mechanism 2. guiding mechanism 3. control panel mechanism 4. hydraulic installation 5. electrical installation assembly 6. frame assembly 7. pin feed mechanism Bending machine weight: 2450 kg Dimensions: length – 4620 mm; width – 1240 mm; height – 1420 mm; Installed power – 5.5 kW. bending ca ...
used
Posiadane oprzyrządowanie: 1. Profil płasko - owalny 90 x 55 x 2,6 - standard + zmienny - promień wewnętrzny 145 mm (łatwy sposób gięcia) 2. Profil płasko - owalny 60 x 30 x 2- standard + zmienny - promień wewnętrzny 135 mm (gięcie łatwy sposób) 3. Rura 60,3 x 2,9 - standard + zmienny - promień wewnętrzny 150 4. Rura 76,1 x 2,8 - tylko standard - promień wewnętrzny 152 W sumie posiadamy 7 kompletów matryc do gięcia i walcowania rur i profili. Charakterystyka: 5 osi sterowanych elektrycznie: Y= Gięcie X=Przesuw Z=Rotacja B1=Przesuw boczny zacisku B2=Przesuw boczny pilota Y Max. szybkość gięcia 0/1” – 150 Y Tolerancja +/- 0 – 0,1 X Max. szybkość posuwu mm 1” – 1.000 X Tolerancja +/- mm – 0,1 Z Max. szybkość rotacji 0/1”- 450 Z Tolerancja +/- 0 – 0,1 Max. średnica rury - 90X4 mm Max. średnica rury dla promienia zmien ...
new
: neu : ca. 8 Wochen ab Auftragse : Italien : 14020 € : 287.41 € : 76 mm : 370 mm : 680 mm : 910 mm : 193 kg : 15 cm³ : 76 x 3 mm : 2 x 5,4 mm : 76 x 3 mm : 70 x 4 mm : 76 x 1,6 mm : 76 x 4 mm : 76 x 6 mm : 76 x 6 mm : 76,3 x 3,25 mm : 50 x 4 mm : 45 mm : 75 x 15 stehend, 75 x 30 mm : 380 mm : 10 mm : 10 mm : 1/2 U/min : 3,5 kW digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders (40 and 50 mm accurate counterbending die positioning foot pedal users manual Maschinen-Kit mit Werkzeugen: Art.No. machine tube radius Price in EURO MG 030V2T K2D MG 030V2T gas inch 2 x Ø 16.100,-- tools: Ø 1/2", (21,3 mm), R46 Ø 3/4", (26,9 mm), R56 Ø 1", (33,7 mm), R67 Ø 1", 1/4 (42,25 mm), R90 Ø 1", 1/2 (48,25 mm), R100 Ø 2", (60,3mm), R150 Art.No. machine tube radius Price in EURO MG 030V2T K3D MG 030V2T gas inch ...
new
: neu : ca. 4 Wochen ab Auftragse : Italien : 10900 € : 223.45 € : 60 mm : 595 mm : 363 mm : 900 mm : 130 kg : 10.5 cm³ : 60 x 3 mm : 2Gas x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 4 mm : 60 x 4 mm : 64 x 4 mm : 64 x 4 mm : 60 x 4 mm : 50 x 4 mm : 35 mm : 60x30x4 stehend, 60x40x5 mm : 300 mm : 10 mm : 10 mm : 1,25 / 2,50 U/min : 1,5 kW digital read out for bending angle manual clamping material spring back compensation digital read out and zero setting for clamping point 2 speeds overload protection mobile by rolls and handle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 4 Wochen ab Auftragse : Italien : 9340 € : 193.34 € : 48 mm : 570 mm : 410 mm : 1000 mm : 110 kg : 6 cm³ : 48 x 3,5 mm : 11/2 x 3.68 mm : 54 x 1,5 mm : 50 x 4 mm : 48 x 2 mm : 48 x 2 mm : 60 x 3 mm : 64 x 2 mm : 64 x 2 mm : 60 x 2 mm : 50 x 4 mm : 32 mm : 45 x 16 stehend, 45 x 25 mm : 300 mm : 10 mm : 10 mm : 2/3 U/min : 1,5 kW 3 phase digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders accurate counterbending die positioning portable with base wheels footswitch users manual alternatively also available as folowing model: SB 48M (single phase, 2 r/min)EURO: 8.820,-- Model with TCPlus control on request machine-kit with tools: Art.Nr. maschine tube radius price SB 48M K2D SB 48M Gas inch 2 x Ø 10.640,-- SB 48T K2D SB 48T Gas inch 2 x Ø 11.160,-- tools: Ø 1/2", (21,3 mm), R46 Ø 3/4", (26,9 mm), R56 Ø ...
used
: gebraucht : 2022 : 9632 : prompt, Zwischenverkauf v : Italien : 2900 € : 1 : 38 mm : 245 mm : 300 mm : 320 mm : 23 kg : 19 cm³ : 38 x 1,5 mm : 38 x 1,5 mm : 35 x 3 mm : 30 x 2 mm : 35 x 1,5 mm : 42 x 1,5 mm : 42 x 1,5 mm : 50 x 2 mm : 50 x 2 mm : 50 x 4 mm : 20 mm : 10 x 25 mm : 25 x 20 (stehend), 25 x 1 mm : 180 mm : 36 mm : 10 mm : 2,8 U/min : 0,9 kW / einphasig kW DEMO MACHINE - MINT CONDITION digital adjustment of the bending angle from 0 - 180 ° single phase motor 220V / 900W electric engine brake indicator light for indicating overload basement made of cast iron, suitable for mounting a tripod (tripod not included) 90° bend in 6 seconds foot pedal without tools (sample photo) OPTIONAL EQUIPMENT: tripod € 220,- ALTERNATIVELY ALSO AVAILABLE AS FOLLOWING MODELS: (Time of delivery approx. 6 weeks) MD 071M (faster version) € 4.140,- MACHINE KIT WITH TOOLS: (time of delivery a ...
new
: neu : ca. 8 Wochen ab Auftragse : Italien : 39500 € : 801.85 € : 127 mm : 850 mm : 1200 mm : 850 mm : 720 kg : 80 cm³ : 127 x 7,1 mm : 4 x 8,56 mm : 127 x 7,1 mm : 114,3 x 5,6 mm : 114,3 x 5,6 mm : 139,7 x 8,8 mm : 139,7 x 8,8 mm : 64 x 6 mm : 88,9 x 3,65 mm : 50 x 4 mm : 90 mm : 130 x 25 stehend, 130 x 6 mm : 700 mm : 36 mm : 10 mm : 0 - 0,75 U/min : 3.5 kW digital read out for bending angle 4 hexagonal tool holders (40, 50 80 and 110 mm) Possibility to bend left and right Users manaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : 2023 : 9704 : prompt, Zwischenverkauf v : Italien : 7780 € : 161.05 € : 1 : 1 : 42 mm : 400 mm : 570 mm : 1000 mm : 80 kg : 4 cm³ : 42 x 3 mm : 48 x 1,5 mm : 42 x 4 mm : 42 x 2 mm : 42 x 2 mm : 50 x 3 mm : 54 x 2 mm : 54 x 2 mm : 60 x 2 mm : 50 x 4 mm : 30 mm : 40x20 (liegend), 40x12 (s mm : 260 mm : 10 mm : 3,3 U/min : 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal alternatively also available as folowing models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min) IMMEDIATELY AVAILABLE DEMO-TOOLS: Brass die 1 1/4gas (42,25mm) € 170,-- castiron former 1 1/4gas (42,25mm) R112 € 420,-- MASCHINE-KIT WITH TOOLS (PRICES ON REQUEST): Time of delivery approx. ...
new
: neu : ca. 8 Wochen ab Auftragse : Italien : 29100 € : 590.73 € : 100 mm : 500 mm : 1200 mm : 850 mm : 480 kg : 43 cm³ : 100 x 6 mm : 3 1/2 x 4 mm : 100 x 6 mm : 100 x 3,6 mm : 100 x 3,6 mm : 114,3 x 6,3 mm : 114,3 x 6,3 mm : 114,4 x 6,3 mm : 88,9 x 3,65 mm : 100 x 5 mm : 70 mm : 100 x 25 stehend, 100 x 5 mm : 400 mm : 36 mm : 10 mm : 0 - 1,3 U/min : 3.5 kW quick-change tooling system digital display of bend material spring back compensation remote control of bend, return and emergency stop functions accurate counterbending die positioning footswitch 3 hexagonal tool holders heavy-duty steel gear case users manaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 8 Wochen ab Auftragse : Italien : 12460 € : 255.43 € : 60 mm : 500 mm : 760 mm : 1000 mm : 186 kg : 10 cm³ : 60 x 4 mm : 2 x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 3 mm : 60 x 6 mm : 64 x 6 mm : 64 x 6 mm : 63 x 4 mm : 50 x 4 mm : 35 mm : 35 x 35 mm : 60 x 20 stehend, 60 x 35 mm : 380 mm : 10 mm : 10 mm : 1,5 / 3 U/min : 1.5 kW quick-change tooling system digital display of bending angle material spring back compensation foot pedal for hands-free operation accurate counterbending die positioning users manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max tube diameter 76 mm Max thickness 3 mm Max bending degree 180 Bending radius max 260 mm
used
3 Axis CNC Electric Wire/Tube Bender Year of manufacture: 2010 Wire / tube capacity: Ø 4 to 16 mm / thickness 2 mm Driven axes: • C axis: bending stroke 195° - Repeatability 0.05° - speed 67 rpm • Y axis: tube linear feed stroke 790 mm - repeatability 0.05 mm - Speed 120 m/min • Axis B: tube orientation unlimited stroke - Repeatability 0.05 mm - Speed 60 rpm Other movements: • Tightening: tube, jaws, ruler • Accompaniment ruler • Collet clamping • Head horizontal movement SIEMENS-CNC
max. tube Ø: 6 - 48.3 mm Max. bending angle: 0 - 360° electr. Connection: 400 V, 1.8 kW Dimensions: 4200 x 1300 x 700 mm Weight: approx. 300 kg
used
The machine is in very good technical condition, approx. 60-80 engine hours worked, inspection possible by agreement. Technical data: Sheet thickness without pre-bending - 6mm Working length - 3100mm Diameter of the upper cylinder - 200mm Diameter of the side cylinder - 190mm Motor power - 4kW Description: The side cylinders can be tilted from the control panel Hydraulic motors are located directly on the cylinders without transmission The cylinders are hardened and ground The machine is adapted for conical bending The smallest rounded diameter is equal to 1.1 times the upper cylinder
used
Type: A89 TNCB Parameters: Manufacturer: CSM Taiwan Year of production / SO / GO: 2014 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Main parameters: Max bending angle 180 °. Largest profile 60x60x6. Max bending radius at the center of the TUBE: CLR 350 mm. Max bending radius at the center of the PROFILE: CLR 300 mm. Working mandrel range 3600 mm. Weight 2500kg. Dimensions: 4700x1200x1200 mm. Power consumption: 15 kW.
used
Type: DOROBEND DOB 32/90 Manufacturer: VEENEX v.o.f., The Netherlands Year of production: 2000 Location: Czech Republic Description: The machine is in good technical condition. Number of tubes bent at one stroke at a time: TR 32x2 mm: 1 TR 26x2 mm: 2 TR 22 x 1.5 mm: 3 TR 18 x 1.5 mm: 4 Bending Head Distance Range: 220-2000mm Possibility to operate 1 or 2 bending heads Power: 5.5 kW Connection voltage: 3 x 380 V, 50 Hz Bending unit drive: hydraulic Oil filling: 120 l Number of bending heads: 2 Hydraulic pressure for controlled deformation of bent material: yes, 2x Orientation bending radius: 3 x tube diameter Max. bending radius: 200 mm Min .. bending radius: 40 mm Max. bending angle: 100 ° Min. bend distance: 220 mm Max. bend distance: 2000 mm One cycle time (90 °, including backward movement): 5 sec. Machine dimensions: LxWxH: 2700 x 110 x 1400 mm Machine we ...
used
Inv. Num. : 5648 Type: XOTM 60 Producer: UNIT Created: 2004 Parameters: Minimum tube diameter: 20 mm Maximum tube diameter: 60 mm Machine length: 4900 mm Machine weight: 130 kg
used
Tube bending machine, with base PAGUS ROKABI ( tube cold bender ) tube diameter: approx. 25 - 61 mm motor: VEM ZG1 KMR71 G 4 0,75 kW 63 rpm 220 / 380 V 3AC 50 Hz IP44 with accessories used, tested ! Dimensions: 1200 x 830 x 1000 mm
used
Inv. Num. : 5262 Type: XOTH 40 Producer: Unicorn Generated: Parameters: Maximum tube diameter: 40 mm Maximum pipe wall thickness: 2 mm Total power requirement: 4.6 kW Machine height: 1120 mm Machine length: 4450 mm Machine width: 800 mm Machine weight: 1100 kg
used
Inv. Num. : 5263 Type: DB 642 ST Producer: Transfluid Created: 1999 Parameters: Minimum tube diameter: 6 mm Maximum tube diameter: 42 mm Maximum bending angle: 190 h Machine height: 1150 mm Machine length: 4000 mm Machine width: 650 mm
used
HYDROIL CHA 80 mandrel bender. This machine has been completely refurbished with change of all hydraulic pipes, pressure gauge, joints and screws + epoxy paint Description: - delivered with 15 complete sets of tools ranging from diameter 17.2mm to diameter 50mm, including certain diameters with 2 different radii (new market value of a single tool: €2,500) - hydraulic clamping vice - hydraulic tightening of the follower guide - hydraulic feedback from the mandrel at the end of bending to facilitate extraction of the tube - mandrel holder rod length 2 meters (so reduced bulk) - possibility of increasing the mast, therefore the working length - maximum capacity: diameter 50mm, thickness 2 mm in steel - maximum bending angle amplitude: 180° - rotation speed of the bending roller: 28°/sec. - torque available at maximum pressure: 654m daN - electric motor: 5.5HP, 1500 rpm - ...
used
We offer directly on behalf of the owner : Bending press, second-hand Make : Graebener Maschinentechnik (Gräbener) Type : GRNM Year of construction : 2005 Flexural force max.: 16.000 kN ( 1.600 t ) Tool length : 1,600 mm Data at 520 N/mm2 Pipe diameter max.: 1,524 mm Tube diameter min.: 457 mm Sheet thickness max.: 40 mm Max. pipe length: 13.2 m Pipe length min.: 6m Pipe weight max.: 25 t Total power requirement approx.: 245 kW / 400 V / 50 Hz Approx. space: 27 x 3 m Total weight approx.: 90t / basic machine approx. 65t Further technical data and details on request or see data sheets in photos / PDF The machine was built in 2005, worked until 2021 and was professionally dismantled and packed for transport.
used
Description: Operating voltage: 220 V Frequency: 50 Hz Rated current: 5 A Connection: 0.75 kW weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 920 x 720 x 1,170 mm
used
The Siemens 840D sl CNC manages the 15 axes that drive the machine with full electric technology, ensuring maximum precision during the bending phase. Equipped with latest generation absolute servomotors with integrated feedback and diagnostics, this impressive tube bender boasts a large vertical excursion (950 mm) which allows the accommodation of multiple levels of equipment. Rigidity and precision make it capable of bending very thick pipes (6/8 sch.80). Despite its imposing size, the 225HE has extremely low energy consumption, thanks to the Green Power philosophy and the Full Electric technology of its components. Its ergonomic configuration guarantees the operator maximum comfort in carrying out his tasks. The machine is equipped with three-dimensional graphics software on a 19 LCD Touch screen, through which the operator can program it intuitively. The UII User Iso Interface also ...
used
Baujahr/ year: 2000/ überholt/ overhauled 2020 CNC: Transfluid bending collision software "T Project Professional" Incl. License key Transfluid bending soaftware "T Project Proffessional Anti collision" with license key Pipe diameters/pipe diam.: 40 168 mm Wall thickness / wall thickness: max. 11.5 mm Bending speed / bending speed: 7°/ sec Aufzugslänge/ arbor length 6000mm Radius/radius: min. 150mm Weight: approx. 26.5 t Connected load: approx. 35 kW Specifics Set of bending tools / set of tools for: Radius 2 x D 78 – 168.3mm bending mandrels Machine was completely overhauled in 2017 and equipped with a new control system equipped. / in 2017 machine fully overhauled and new control
used
Description: Set of 5 manual tube bending machines Different sizes New and unused weight approx.: 40 kg, Approx. Onsite Dimension. (l x w x h): 900 x 500 x 500 mm
used
Hand - Swivel bending machine KRAMER type AMS 650 x 1.5 Hand swivel bending machine, bending bench Year of construction approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper cheek opening approx. 60 mm Bending cheek adjustment approx. 0-25 mm Bending angle 0-180- Upper cheek adjustment via hand crank - Pre-screw rail for the bending clamp - one-piece sharpening rail 135 Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg good condition; used