trumpf 3000 used for sale

TECHNICAL DATA: Working area 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. sheet thickness structural steel 25 mm Max sheet thickness stainless steel 20 mm Max sheet thickness aluminium 12 mm Machine regularly serviced by TRUMPF! Standard: - Closed machine frame with integrated laser unit - TRUMPF laser TLF 5000 - Laser unit: CO2 laser, high-frequency excited, maintenance-free turboradial blower, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: Gantry drive in combination with linear direct drives - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Plasma sensor inges, PMS - Automatic sheet metal edge detection - Programmable performance cycles - Microweld - Automatic nozzle cleaning - Fast editing with SprintLas - ContourLas for making small ho ...

Make: TRUMPF Type: TRUMATIC L 3030 RotoLas Built: 2002 Working range: 3000 x 1500 mm Laser power: 2000 watts Engine hours: 54,000 Control: Siemens Sinumerik 840D Standard: Closed machine frame with integrated laser unit Laser unit: CO2 laser TLF 2000 high frequency excited, mirror telescope, cooling unit, logbook function Automatic pallet changer and longitudinal conveyor belt Drives: Maintenance-free three-phase servomotors HI-LAS High-pressure cutting Plasma Sensors (PMS) Fast editing with SprintLas ContourLas for making small holes Cutting gas pressure setting programmable Laser cutting head with 5" lens and laser cutting head with 7.5" lens, DIAS III Cutting head quick-change device Position laser diode Automatic focus position setting AutoLas Plus Logbook function Laser Oil spraying device for safe thick sheet processing Auto shut-off Workspace lighting  ...

Used machine in good condition. Available for immediate delivery. - Laser Type: CO2 - Working area (X x Y x Z): 6.000 x 2.000 x 115 mm - Max. workpiece weight: 2.800 kg - Positioning speed X/Y: 200 m/min - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 6 kW - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 15 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 31.581 h - Beam ON Working hours: 13.734 h - Electric consumption entire unit: 33 - 67 kW - Weight: 21.500 kg - Dimensions (long x wide x high): 16.100 x 5.200 x 2.000 mm

Used machine in good condition. Available for immediate delivery. - Max. outside diameter of round tubes: 20-150 mm - Max. outer circle diameter of rectangular tubes: 20-150 mm - Max. finished part length: 6.500 mm - Laser Output: 2.700 kW - Laser Type: CO2 - Maximum material thickness mild steel: 6,4 mm - Control: SIEMENS SINUMERIK 840 D - Dimensions (long x wide x high): 18.000 x 9.000 x 2.800 mm - Weight: 17.700 kg

LoadMaster - Laser Type: CO2 - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 710 kg - Positioning speed X/Y: 60 m/min - Simultaneous positioning speed: 85 X+Y m/min - Laser Output: 4 kW - Maximum material thickness mild steel: 20 mm - Maximum material thickness stainless steel: 15 mm - Maximum material thickness aluminium: 10 mm - Control: SINUMERIK 840D - Machine ON Working hours: 47.940 h - Beam ON Working hours: 25.318 h - Weight: 11.500 kg - Dimensions (long x wide x high): 9.300 x 4.600 x 2.000 mm

- 115mm cutting head. - Conveyor belt on the right. - Nozzle changer. - Pedestal version. - Preparation for connection to LoadMaster. - Warehouse interface - Laser Type: CO2 TruFlow - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 1.800 kg - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 6 kW - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 15 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 64.524 h - Beam ON Working hours: 40.119 h - Weight: 12.000 kg - Dimensions (long x wide x high): 8.800 x 4.800 x 2.400 mm - Electric consumption entire unit: 32 kW

Few hours of use, in combination with the TRUMPF 600L combination machine

1250 x 3000mm TruCoax 2000w

Sold 2 new tables these were only about a week in use danaach was converted on brushes Dimensions: tables 1 box 5 segments 2201080mm 1 Segment 1801080mm Front part 1Segment 5001080mm 2 box 2 tables 28001560100mm Table separate with pneumatics and electric drive 630200mm

with LoadMaster - Laser Type: CO2 TruFlow - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 1.100 kg - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 7 kW - Maximum material thickness mild steel: 30 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 20 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 57.859 h - Beam ON Working hours: 18.000 h - Electric consumption entire unit: 35 kW - Dimensions (long x wide x high): 11.000 x 4.600 x 2.400 mm - Weight: 12.000 kg

with LoadMaster - Laser Type: CO2 TruFlow - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 1.800 kg - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 6 kW - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 15 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 75.000 h - Beam ON Working hours: 18.622 h - Dimensions (long x wide x high): 8.800 x 4.800 x 2.400 mm - Electric consumption entire unit: 32 kW - Weight: 12.000 kg

Refurbished machine 3000 x 1500mm Laser: 5000w

TRUMPF TruLaser 5030 Year of prod. 2007. Operational hours laser beam: about 22500 h Operational hours / machine on: about 60000 h Technical condition: good+. Machine under constant service care, all spare parts replaced on time. Recently replaced laser mirrors. The machine is still in production. Control: Siemens 840D Laser power: 5 kW. Maintenance-free turbine TruFlow 5000 Working range: 3000 x 1500 x 115 mm Quality sheet cutting: - black steel up to 25mm - stainless steel up to 20mm - aluminum up to 12mm Equipment: - precise sheet metal burning system - linear drives - conveyor for removing small details and sheet metal remnants - lighting of the working space - positioning laser diode - oil mist spraying - PierceLine system: the function of quick burning into the material, adjusting the laser power to the material being processed. Up to 90% shorter piercing time!  ...

Used machine in good condition. Available for immediate delivery. - Working area (X x Y x Z): 2.500 x 1.250 x 115 mm - Laser Type: CO2 - Positioning speed X/Y: 60 m/min - Simultaneous positioning speed: 85 X+Y m/min - Laser Output: 1,8 kW - Maximum material thickness mild steel: 12 mm - Maximum material thickness stainless steel: 4 mm - Maximum material thickness aluminium: 3 mm - Control: SINUMERIK 840 D - Consumption values CO2: 1 l/h - Consumption values N2: 6 l/h - Consumption values He: 13 l/h - Machine ON Working hours: 43.950 h - Beam ON Working hours: 23.696 h - Weight: 7.900 kg - Dimensions (long x wide x high): 7.100 x 5.900 x 2.000 mm

1300 x 3000mm 2000w Automatic Loading & Unloading Siemens 840

Copy and coordinate nibbling machine make TRUMPF type CN 701Machine -No: 1118Technical specifications:Horizontal projection: 1550 mmWorking area: 1250 x 1300 mm: 1250 x 2000 mmSmallest section of a circle for copy nibbling: 12 mmsmallest circular diameter with internal circular guidewhen shearing: 56 mmsmallest circular diameter with internal circular guidewhen nibbling: 65 mmstepless stroke rates: 350-1400 H / minWorking height: 1020 mmDrive power: 2.2 kWExternal dimensions approx .: 2900 x 950 x 2130 mmWeight approx: 2125 kgWith- lots of accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 85 t chamfer lenght: 2000 mm distance between columns: 1750 mm Control: TRUMPF Delem DA 65T total power requirement: 10 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m T R U M P F (Germany) CNC - Controlled Hydraulic Press Brake Model TRUMABEND V 85, year 1996 Serial No. 88 31 52 ______________________________________________________________________ ____________ Pressure, max. 85 to Working width, max. 2.050 mm Working width between columns 1,750 mm Side daylight of each column 410 mm Max. distance between upper and lower tool holder w/o tools 350 mm Adjustment of upper tool holder approx. 300 mm Table width approx 105 mm Height of Table from floor approx. 1.050 mm Max. stroke 215 mm  ...

table length: 3000 mm table width: 1500 mm burner heads: 1 laser capacity in Watt: 2000 table:: 2 x-travel: 3010 mm y-travel: 1510 mm z-travel: 100 mm control: Bosch type: CC320 Trumagraph mm total power requirement: kW weight of the machine ca.: 15,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 0 - Material thickness steel Fe52/Fe37 max: 0 mm - Material thickness aluminium max: 0 mm - Axis speed [X axis] max: 0 m/min - Operating hours: 0 - Material thickness (punching) max: 0 mm - Material thickness max: 0 mm - Material thickness stainless steel max: 0 mm - Simultaneous positioning speed (X / Y): 0 m/min - Punching speed (Hit speed max.): 0 1/min - Number of index tool stations, max: 0 - Tool rotation, max: 0 r/min - Control type: 0 - Compressed air pressure min: 0 bar - Compressed air consumption max: 0 l/s - Turret rotation: 0 r/min - Oil tank capacity: 0 l - Power supply: 0 kVA - Axis speed [Y axis] max: 0 m/min - Working area max: 0 mm - Punching force: 0 kN - Punch diameter max: 0 mm - Max. workpiece weight: 0 kg - Power: installed max: 0 kW - D ...

- 115mm cutting head - Conveyor belt on the left - Nozzle changer - LoadMaster with sheet separator - Warehouse interface - Laser Type: CO2 TruFlow - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 1.100 kg - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 7 kW - Maximum material thickness mild steel: 30 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 20 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 49.815 h - Beam ON Working hours: 27.724 h - Electric consumption entire unit: 35 kW - Dimensions (long x wide x high): 11.000 x 4.600 x 2.400 mm - Weight: 12.000 kg

Cell with welding laser E-TECH TRUMPF TLF4000 Year of construction: 2005 Laser: TLF 4000 Rok produkcji: 2005 Laser: TLF 4000 Receiving robot : Yaskawa Motoman NX100

220 V, 9.6 A, 2000 W MAXIMUM CHAMFER LENGTHS MAXIMUM CHAMFER LENGTH STEEL 400 N/MM² 15 mm MAXIMUM CHAMFER LENGTH STEEL 600 N/MM² 9 mm MAXIMUM CHAMFER LENGTH STEEL 800 N/MM² 6 mm RADII SMALLEST RADIUS 55 mm GENERAL WORKING SPEED 2 m/min STROKE RATE AT NOMINAL LOAD 370 1/min RATED POWER 2600 W SHEET THICKNESS 4 mm - 160 mm WEIGHT WEIGHT WITH HANDLE, WITHOUT CABLE 16.5 kg As good as new. Condition

3000x1500mm

Weld beveller, weld bevel former, weld seam preparation, bevel forming machine, edge milling machine -Bevel length: max. 10 mm -Strength: 40 kg/mm² -220 V 1800 W -470 strokes/min -Weight: 15 kg

Only used for tests Includes: Double table New welding head - Laser Type: CO2 TruFlow - Working area (X x Y x Z): 4.000 x 1.500 (2 x 2.000 x 1.500) mm - Positioning speed X / Y / Z: 100 / 100 / 100 m/min. m/min - Maximum axis speed of B Axis: 90 1/min - Maximum axis speed of C Axis: 90 1/min - Laser Output: 6 kW - Control: SIEMENS Sinumerik 840D - Machine ON Working hours: 31440 - Beam ON Working hours: 3.242 - X Axis travel range: 4.000 mm - Y Axis travel range: 1.500 / 2.000 mm - Z Axis travel range: 750 / 1.000 mm - B Axis travel range: ? 135 ? - C Axis travel range: n x 360 ? - Position accuracy of linear axes (X / Y / Z): 0,08 mm mm - Positioning accuracy of rotary axes B / C: 0,015 ? ? - Dimensions (long x wide x high): n/a mm

Used machine in good condition. Available for immediate delivery. - Laser Type: CO2 TruFlow - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 1.100 kg - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 6 kW - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 15 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 49.715 h - Beam ON Working hours: 18.000 h - Electric consumption entire unit: 35 kW - Dimensions (long x wide x high): 11.000 x 4.600 x 2.400 mm - Weight: 12.000 kg

Manufacturer TRUMPF Type L 3030 Year of construction 2005 Working range 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840D Laser power 2,700 watts Accuracy +/- 0.1 mm Equipment: Rotolas Closed machine frame PCS Automatic pallet changer Longitudinal conveyor belt for small parts/waste Laser Power Control Control Siemens: Open PC-based controller, simple operation, online help, diagnostic functions, maintenance hole book, technological data, teleservice Safety: Multi-beam photoelectric sensors, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust collector, protective cabin DIAS height control Automatic focus position adjustment AutoLas Plus Network connection (RJ45) by installation via teleservice The machine is in good condition. Location Germany, visit by appointment. Errors in the technical data and pri ...

Standard equipment Machine - Working area: 2500 x 4000 mm - Enclosed machine frame integrated in the laser unit - Mobile unit for precise machining - Maintenance-free linear drives in all axes - Enclosed beam guide - Single spindle - Cooler - Automatic pallet changer - Longitudinal conveyor belt - 17 colour touch screen - Work field illumination - Cabinet for machine accessories - Laser positioning diode (on cutting head 1) - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - with LiftMaster - TruTops - 2 heads with LensLine and ControlLine - Working area (X x Y x Z): 2.500 x 6.000 x 105 mm - Laser Type: CO2 TruFlow - Max. workpiece weight: 2.000 kg - Positioning speed X/Y: 173 m/min - Simultaneous positioning speed: 304 X+Y m/min - Laser Output: 3.600 x 2 kW - Maximum material thickness mild steel: 20 mm - Maximum material thickness stainles ...

There is dripping oil problem on piston 85 Ton Folding length : 2500 mm

CNC Lazer TruLaser 3030 Table size : 3000 mm x 1500 mm Maximum load capacity : 900 kg Power : 4000 W Maximum thickness : 20 mm Machine is in very good condition

Co2 laser cutter year 2001 currently working, includes automatic charger.

Punching machine Table 5m Automatic evacuation 8 tool charger 20T strike Perimeter security cell battery of tools

Capacity: 50 t Folding length: 1200 mm CNC Brand: Delem MAKE  Trumpf TYPE    Trumabend V50 YEAR   2005 SPECIFICATIONS Controll    Delem Pressbrake / Folding / Mech. / Hydr.    Pressbrake Hydraulic / Mechanical    hydraulic Bending length    1200 mm Distance between column    800 mm Press force    50 Ton Stroke    215 mm DIMENSIONS Length    2500 mm Width     2000 mm Height    2100 mm

Other Info: Laser Marking MAKE   TRUMPF TYPE     VECTORMARK    YEAR    2002 DIMENSIONS Length   1500 mm Width    1000 mm Height    2000 mm Max. length           : 1064 mm Max. watt              : 15 W Focus          &nbs p;         : 163 mm Laser height         : 0 – 300 Max. area              : 120 x 120

Power = 18t (up to 6.4mm) With the CAM TOPS 2000 software Speed up to 900 strokes per minute

Pressure: 165 t Sheet length: 2070 mm Sheet width: 1280 mm Positions ATC: 0   CNC Brand: _Unknown / Other CNC Model: Trumpf CC 220 SPECIFICATIONS Controll  TRUMPF CC 220 Hydraulic / Mechanical  Hydraulic Capacity Ø x plate thickness   6,4 mm Cutting lenght   X = 2.070 mm Throat  Y = 1.280 mm Press force  165 Kn Ton Working speed  80 / 55 M/Min  

6000 mm x 2000 mm Power : 4 Kw Working hours : 35000 Machine is in good condition

Trumpf V50 1300 mm press brake 50 tons The machine is located in Spain.

Power = 18t (up to 6.4mm) Machine is available and under power. Price is not included tools. Only a few will be available Great condition, regular services from Trumpf. With the CAM TOPS 2000 software

TRUMPF MINIMATIC 100 punching machine. Perfectly functional from 1988. Regular maintenance.

Trumpf TruLaser 3530 Laser Cutting Machine power 4000 W capacity 1500x3000 in active use Maintenance done on time

Trumpf Trulaser 3530 laser cutting machine 3000 mm x 1500 mm Power : 4 KW Machine is in good condition

Metal length : 3000 mm Metal width : 1500 mm 4 KW Double pallet Max thickness : 0.15 - 25 mm Black 0.10 - 12 mm Stainless Steel 0.30 - 8 mm Aluminum 0.30 - 5 mm Galvanized

All maintenance has been done by Trumpf service Machine can be seen in working condition

Version with LIFTMASTER for loading and unloading parts and automatic cross receiver of small parts. Working area 3000x1500 mm. Machine regularly serviced.

Manufacturer: Trumpf Model: Trumatic L 6030 Year of manufacture: 2004 Power: 4 kW Laser: TLF 4000t Table: 6000 x 2000 mm with Rotolab CE Norms

Manufacturer: Trumpf Type: Trumatic 5000 FMC -1300 Year: 2004 Working area: 2535 x 1280 mm Punching force: 22 to Control: Sinumerik 840 D Working hour: 22476 h Max. Sheet thick.: 8 mm Max. Material weight: 200 kg Max. Tool diameter: 76,2 mm Max. Speed: 100/60/116 m/min Positioning accuracy: +/- 0,1 mm Length:6760 mm; Width:6100 mm; Height:2500 mm; Weight:13700 kg;

Trumpf L 3030 Trumatic laser cutting machine metal dimensions: 3000 mm x 1500 mm Power : 2000 W Machine is in good condition

Sheet metal bending machine trumpf TRUMABEND V-130 equipped, is currently in use

In working condition Punch force- 15 t Work area 1000х1000 Max thickness - 4.5 mm Plus:- 2 x Extra Original Side Tables Additional Programme Memory Storage Unit Full Set of Books Safety Optical Guards