We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,108 used machines on RESALE, but how to find them? Machine Search
used
Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1996, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Wight approx. kg: 1400, Year :1996
used
Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1999, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Compressed air bar: 155, Wight approx. kg: 1400, Year :1999
used
Manufacturer: Trepel Hebebühne, Type: EH40/13/1, Year: 1996, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Year :1996
used
Manufacturer: Trepel, Type: Hydraulikhubtisch, Year: 1972, Lifting power kg: 1000, Length mm: 2900, Width mm: 1700, Total hight mm: 300, Carriage: yes, built-on roller conveyor: no, FREE TEXT: ohne Schaltschrang inkl Hydraulistation, Year :1972
used
Manufacturer: Trepel, Type: EN 10/10/0, Year: 2002, Lifting power kg: 1000, Length mm: ca 1400 , Width mm: ca 800, built-on roller conveyor: no, Year :2002
used
Electronic Scissor Lift Fabr. TREPEL Type M-Boy 4Machine -No: 30706872, built in 1985Load capacity: 500 kgOperating pressure max.:160 barTable size: 710 x 600 mmHeight retracted: 470 mmMax. Extension height: 920 mmOperating pressure: 160 barDrive power: 1.1 kWExternal dimensions retracted: 650 x 900 x 470 mmPower connection: 380 V / 50 HzWith- Remote control with 3.0 m cable- freely installable limit switchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydr. Scissor lift table TREPEL - L. A. VAN EIJLE & Co. Year of construction approx. 1980 Load capacity approx. 5 ton. Platform size 1700 x 1100 mm Stroke max. 515 mm Construction height Table bottom with rail castors 535 mm Height Table bottom without rail castors 480 mm Table height raised with rail rollers max. 1050 mm Table height raised without rail rollers max. 995 mm Travel speed Rail chassis approx. 8.5 meters/min. Motor power 4 kW Mains connection 400 Volt, 50 Hz - Manual switch for up and down on the cable - Safety limit switch - Hydraulics with tank mounted in the underframe- Lifting shears with two lifting cylinders - The table was movable on rails, 4 rollers on the base, 200 mm - Drive of the rail rollers via SEW Gear motor with chain Space requirement L x W x H 2070 x 1350 x 1050 mm net weight approx. 1.3 ton. good condition; used
used
Scissor lift table with roller conveyor TREPEL Type: E 5 / 8 / 0 ( E5/8/0 ) Load capacity: 500 kg track length: 1300 mm web width: 950 mm number of rollers: 13 roller diameter: Ø 89 mm height ( retracted ): 800 mm motor ( hydraulic power pack ): 0.75 kW 230 / 400 V 3AC used, tested ! Dimensions: 1335 x 1100 x 810 mm
used
Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999
used
Manufacturer: HSM , Type: Rotationsquerschneider, Year: 2012, Control: Siemens, Längenogabe: yes, Stückzähler: yes, Cross cutting guillotine: yes, Cutting lenght mm: 1.500 - 2.620, Schnittbreite min-max mm: 600 - 2.100, Abstapelung der Funierblätter: für Folien, Hebebühne: yes, machine ready for demonstration: yes, FREE TEXT: Anlage wurde um einen UV Strahler und ein Kühlaggregat erweitert/ Vorschub max.40 Meter, Year :2012
used
Manufacturer: Hebebühne, Lifting power kg: 3000, Length mm: 4000, Width mm: 1250, Total hight mm: ca.400, Safety strip: yes, built-on roller conveyor: no, Total power kW: ca.3,