tos svitava used for sale

Key data: 3000 mm, 1800 mm, 1600 mm

Inv. Num. : 7037 Type: OPTIMA Producer: TOS Created: 2005 Parameters: Duty cycle: 83171 h Hours: 36486 h Work table length: 2500 mm Work table width: 1800 mm X-axis travel: 3000 mm Y-axis travel: 1800 mm Z-axis travel: 1600 mm

Carousel lathe - Single column SKIQ 12 CNC Manufacturer: TOSHulin Year: 1989/ GC: 2010 Control Siemens ... Sinumerik 840 D Max. workpiece diameter ... 1500mm Table diameter... 1250mm Max. table load ... 12000kg Max. workpiece height ... 1570mm Axis Z... 1000mm Average of the grinding piece ... 800mm Number of positions in the tool changer ... 15 Face plate diameter ... 1250mm Max. ram stroke ... 1000mm Max. workpiece weight ... 8000kg Rapid traverse ... 8000m/min Total Power Requirement ... 63kVA Main engine power ... 40kW Machine weight... 22000kg The machine is in good condition, possible to test under electricity.

Inv. Num. : 6079 Type: FSQ 80 CNC Producer: TOS Created: 1990 Parameters: Control system: NS 720 Work table length: 3000 mm Work table width: 800 mm Maximum table load (uniform): 1000 kg X-axis travel: 3000 mm Y-axis travel: 1000 mm Z-axis travel: 1000 mm Total power requirement: 40 kW Spindle speed: 2500 1/min Machine height: 3400 mm Machine length: 7770 mm Machine width: 4360 mm Equipment: Tool Holder

CNC table drill TOS WHN 13 with quill Built in 1991 Control FAGOR 8055 Travel xyzw 3500/1850/1330/600 mm Table size 1800 x1800 mm. Machine immediately available and available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.

core boring: 70-560 mm bore depth: 20000 mm drilling diameter: 70-500 mm core boring capacity in St 60 - reboring: special: 560-1000 mm workpiece diameter: 3200 mm workpiece weight: 200 t faceplate diameter: 2900 mm speed of boring spindle:: 100 - 500 U/min feed range: 3 - 2000 mm/min boring spindle drive: 55 kW spindle head drive: 150 kW workpiece turning speeds: 230 U/min control: Fanuc total power requirement: - kW weight of the machine ca.: - t 2010 Retrofitted equipped with: - Fanuc Control - 4-Jaw Chuck - Oil Pressure Head - Boring Head - Drill Head - 2-Point Rollers Steady Rest (4) - 3 Point Steady Rest (2) - Bar Rest (2) - Coolant & Coolant Piping - Chip Conveyor - Honing Oil Tank & Honing Tool Bars The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drill press, bench drill, column drill, pillar drill -Manufacturer: TOS, high-performance column drilling machine type 40 TF / C -Motor: MEZ 2.2 kW -Speeds: 56 - 2240 rpm -Table size: 400 x 315 mm, travel 600 mm -spindle taper: MK4 -Spindle stroke: 165 mm -Projection: 290 mm -Pillar Ø: 140 mm -Dimensions: 1200/650 / H1990 mm -Weight: 602 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, spindle -Manufacturer: TOS, spindle with nut Z-axis from milling machine FN 32 -Thread: diameter 30 mm -Pitch: approx. 5 mm -Thread length: 450mm -Dimensions: 645/115/50 mm -Weight: 4.1 kg

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: tool grinding machine -Adjustment: SK50 -Tip height: 145 mm -Part head: swiveling, rotatable -Dimensions: 220/220/H285 mm -Weight: 17 kg

Clamping table, clamping angle, T-slot table, rotary table, circular grinding unit, milling machine table -Attachment for a: TOS universal grinding machine -Table surface: 490 x 190 mm -T grooves: 2 -Clamping table: rotatable, pivotable, movable -Dimensions: 490/190/H290 mm -Weight: 31kg

Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 -Admission inside: MK4 -Tip height: mm -Passage: Ø 32 mm -Part head: swiveling -Dimensions: 430/430/H280 mm -Weight: 83 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm -Recording: MK2 -Drawing with the photos -Price: per piece -Number: 2 pieces -Dimensions: 200/75/H145 mm -Weight: 5 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 200 mm -Plating: brass -Tip height: 230 mm -Drawings with the photos -Price: per piece -Number: 1x available -Dimensions: 530/200/H740 mm -Weight: 100 kg

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 31 pieces adapter sleeves -for: TOS high-speed milling head -different sizes: 1-16 mm in 0.5 mm steps -Drawing with the pictures -Sale: only as a package -Weight: 5.3 kg

Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 -Admission inside: MK4 -Tip height: 100 mm -Part head: swiveling -Dimensions: 320/320/H230 mm -Weight: 37 kg

Horizontal boring mill WHO11NC

MAX DIAM 500, MAX MODUL 8 , MAX STROCE 125 , SINUMERIC 840 D

HBM WD 130, new in 1969, repairs 1998

Cylindrical grinding machine BUB 32/2000 NC Manufacturer: TOS Hostivař Year: 2002 Control Siemens ... Simatic OP17 Max. grinding diameter ... 320mm Max. grinding length ... 2000mm Max. workpiece weight ... 350kg L x W x H ... 4600x1980x1760mm Machine weight ... 5300kg The machine is in good condition, possible to test under electricity.

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-axis: 1250 mm w-axis: 800 mm b-axis: 360 ° output: 85 KVA table-size: 1800x1800 mm table load: 12 t spindle taper ISO: 50 table rotation: 360x0,0001 ° spindle motor: 37 kW spindle turning speed range: 1500 U/min feed range: 4-8000 mm/min electrics - voltage/frequency: 400 / 50 V/Hz weight of the machine ca.: 35 t dimensions of the machine ca.: 7x7x6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6969 Type: FSQ-C 80 Producer: TOS Generated:- Parameters: Control system: Mefi CNC 859 Milling spindle speed: 11-2500 1/min Maximum table load (uniform): 2000 kg X-axis travel: 1100 mm Y-axis travel: 960 mm Z-axis travel: 1000 mm Power output: 30 kW Cone: ISO 50 Equipment: Roundtable

Tos W 100 A NC Controlled Table Type Boring Machine Machine is in good working condition Tools are included( 15 pieces BT 50 holder and more) 1650x1250 mm Turning table Heidenhain digital control

I offer those interested a used rotary table from the HP100 horizontal boring machine. The size of the table is 2200x2200 mm, weight 14,000 kg, rotation on a ruler + optically adjustable by 90°, linear measurement in the direction of table movement. Load capacity over 4,000 kg. Motor/manually controlled feed and rotation. Sliding guide in condition according to the photo. Fully functional. We are replacing it with a table with a rotary sensor. Available immediately. (it will be connected until 12/10/2022 and can be demonstrated)

TOS SKJ 12 vertical lathe The machine is technically efficient after replacing the transformer from the table rotation, worn out, requires inspection and feed adjustment Year of manufacture 1987 Documentation in Czech electrical cabinet dmensions 1630x590 mm, weight 675 kg

Grinding diameter: 630 mm Grinding length: 2000 mm Peak height: 320 mm Table speed - without steps: 0.005-5 m / min Longitudinal table movement min./max.: 5/3350 mm Table speed: 8 m / min Grinding headstock-cross movement: 420 mm Workpiece headstock motor: 3,0 kW Grinding headstock-motor power: 22 kW Motor of the internal grinding device: 3 kW Lubricating pump motor: 0,11 kW Machine weight approx.: 15700 kg Space requirement approx.: H1970 / B3100 / L12650 mm

power supply 380 V weight 1520 kg power of the grinding wheel spindle 2.2 kW workpiece spindle power 0.37 kW grinding spindle speed 2100-2800 rpm. Rotation of the grinding wheel headstock 60 ° Table rotation 10 ° Rotation of the headstock of the workpiece 90 ° Maximum diameter of the ground object 160 mm Maximum center distance 320 mm

- With 6 filling valves Dimensions: - Length: 1000 mm - Width: 500 mm - Height: 1000 mm - Weight: approx. 80 kg

turning diameter over bed: 410 mm turning diameter over slide rest: 210 mm turning length: 1500 mm turning diameter in the gap: mm turning speeds: 11 - 2240 U/min centre height: 205 mm spindle bore: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 3,3 x 1,4 x 1,8 m Center Lathe - Fagor digital display - Röhm 3-jaw chuck 250mm - Multifix steel holder with 4 cassettes - Coolant system - Machine light - Feed protection - Chip protection wall - chip tray - Emergency stop facility The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-travel: 1250 mm work spindle diameter: ISO50 mm spindle turning speed range: 10-2500 U/min Control: TNC 430 Heidenhain total power requirement: kW weight of the machine ca.: ca. 38 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TOS-OSO FNK 2R - Tool milling machine Description- Heidenhain PT 855 position indicator - Infinitely variable speed adjustment - pneumatic tool clamp - Coolant device - Task lighting -Vice - incl. instruction manual & documents - Year of construction 2006 Specification - Table dimensions: 250 x 1100 mm - T-slots number x spacing: 4x 50 mm - Middle groove width: 14 mm H8 - Width of additional grooves: 14 mm - Max. permissible table load: 200 kg - Manual table work stroke lengthwise/crosswise/vertically: 840 / 376 / 460 mm - Motorized table work stroke longitudinal/transverse/vertical: 820 / 355 / 440 mm - Number of feed stages: infinitely variable - Feed range long/cross: 28 - 630 mm/min - Feed range vertical (reduction 1:3.3): 8.5 - 196 mm/min - Rapid feed longitudinal/transverse: 1500 mm/min - Rapid feed vertical (reduction 1:3.3): 450 mm/min - Distance from sp ...

Control Heidenhain TNC 407 Year 1996 Workpiece weight 2200 kg X=1250mm Y=1125mm Z=950mm Machine can be checked under power

TOS W 75

swing diameter: 220 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m for TOS CIRCULAR GRINDING MACHINES of the BUC series 1x steady rest 1x 3-jaw chuck TOS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Swing over bed 840 mm Swing over support 530 mm Center distance 2000 mm Spindle bore 82 mm Spindle diameter in front bearing 160 mm Spindle taper - metric 100 Morse Tailstock 6 Maximum workpiece weight at the lowest speed of 6000 kg Largest blade profile 40 x 40 mm Electric motor for headstock drive 18.5 kW Machine dimensions L x W 3420 x 1880 mm Machine weight (according to the spike distance) 5700 kg

Key data: 130 , 3500 , 2000

CNC SIEMENS 840D X-axis (longitudinal) 3500 mm Y-axis (transverse) 2000 mm Z-axis (vertical) 1250 mm Table length 1800 mm Table width 1800 mm Maximum workpiece weight 12000 kg Spindle diameter 130 mm Maximum spindle speed 800 rpm Magazzino utensili 52 posti Spindle motor 37 kW Year of revision 2005 ------------------- Length x width x height 7200 × 7800 × 4900mm Weight 32000 kg

Tos FA3AV X: 890 - Y: 275 - Z: 400mm Max longitudinal travel X-axe: 890 mm Max cross-travel Y-axe: 275 mm Max travel Z-axe: 400 mm Power on spindle: 4 kW Type of millinghead: ISO 40 Spindlespeeds: 45 - 2800 rpm Table size: 1375 x 300 mm Length: 1900 mm Depth : 1900 mm Height: 1950 mm Weight: 1950 kg ACCESSORIES & TOOLING: yes

Toshiba B-EX4D2 Direct Thermal Label Printer -Printing technology: Direct thermal -Resolution: 203 dpi -Max. print speed: 305mm/sec -Max. print width: 104mm -Max. print length: 1,498mm -

Offer 24001 Specifications: - Working width 3050 mm - Printing capacity 220 t - Passage between uprights 2550 mm - Table width 405 mm - Projection 350 mm - Installation height approx. 240 mm - Plunger stroke 270 mm - Working height approx. 920 mm - Engine power approx. 15 kW - Oil filling approx. 300 l - Space requirement approx. W 4200 x H 2980 x D 2300 mm - Weight approx. 12500 kg - With: - Swivel arm – control panel with CYBELEC control - for 4 axes Y1 + Y 2 , X , Z -Mot. Back gauge with mot. Controlled height adjustment - Crowning - Safety – light barrier - 4-fold universal die + divided. Sharpening tool 3000 mm - Deer foot tools, V – dies 2900 mm - Other tool sections - E.- Footswitch, - Support arms

Tos WHQ 13.8 CNC Heidenhaine TNC 430 Year 2001 X 3500 Y 2000 Z 1200 W800 Table size 1800x1730 Table load 10000 kg Cooling through the spindle – yes Chipconveyor - yes ATC 60 pockets Max spindle RPM - 2800 Tools BT-50

CATALOG NO. 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm in advance: - pawls - sequential pulling shaft - 2 rows of clamps - pulling, sequential input shaft - 500mm planing shaft, 4-knife, 7.5kW engine - clamps - pulling, smooth, output shaft - pressure on the lead from down: - adjustable insertion table + pressure - slip shaft, smooth - 500mm planing shaft, 4-knife, 5.5kW engine - 2 slip shafts, smooth - side pressure in the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - smooth adjustment of feed speed 8-30m/min - electric tabletop lifting - diameters of the exhaust pipe: 2x145mm, 2x160mm - dimensions length/width/height 2050x1700x1700mm - weight 2100 kg ADVANTAGES – ideal for flooring processing – electric tabletop lifting ...

Inv. Num. : 7260 Type: WHN 13.4 A Producer: TOS Created: 1986, GO 2003 Parameters: Control system: MEFI CNC 859 Work table length: 1800 mm Work table width: 1600 mm Maximum table load (uniform): 12 t Maximum spindle speed: 1098 1/min X-axis travel: 3000 mm Y-axis travel: 2000 mm Z-axis travel: 800 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Cone: ISO 50 Machine height: 3900 mm Machine length: 6200 mm Machine width: 5930 mm Machine weight: 32 t

Key data: 180 mm, 360 mm, 14 U/min

Center height 180 mm Center width 750 mm Circulation diameter over bed 360 mm Spindle bore 41 mm Spindle speed range, stepped 14 – 2,800 rpm Machine weight 1.9 t Connected load 6.5 kW

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table-size: 800x400 mm quill stroke: ca. 100 mm turning speed - milling spindle: 40-2000 U/min feed range: X, Y: 8-400 mm/min feed range: Z: 4-200 mm/min rapid travel - x-direction: 2000 mm/min rapid travel in y-direction: 2000 mm/min rapid traverse cross: 1000 mm/min vertical head swivelling: +/- 90 Grad weight of the machine ca.: 2 t dimensions of the machine ca.: 2,1x1,7x1,7 m Universal milling machine with DRO for 3 axis, sviweable vertical milling head and horizontal milling spindle. -incl. knee and milling 3 arbors for milling discs -incl. 9 tool holder ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7266 Type: WH 13 Producer: TOS Created: 1972 Parameters: Work table length: 1800 mm Work table width: 1600 mm X-axis travel: 1250 mm Y-axis travel: 2200 mm Z-axis travel: 1700 mm Equipment: 4x extensions in the length of 4x1 m 8x tracks for 1000 mm extension Turntable New ball screws and bearings Tools & Equipment

Inv. Num. : 7273 Type: WH 10 NC Producer: TOS Generated:- Parameters: Work table length: 1120 mm Work table width: 1000 mm X-axis travel: 1000 mm Y-axis travel: 900 mm Z-axis travel: 630 mm

BHB 40 CNC cylindrical grinding machine Control: Marposs Servo motors: Indramat Producer: Czech Republic TOS The machine is new, it has never been used. You need to upload a program to the grinder or use a new control. The machine was started 7 years ago and after uploading a simple program, everything starts. There is everything for the machine tool, starting from a complete set of covers, through control cabinets, hydraulic systems, and manuals. Machine stored, not connected. Technical specifications: - distance between centers: 1000 mm - grinding diameter: 400 mm - wheel dimensions: 750 mm x 100 mm x 305 mm - maximum workpiece weight: 500 kg - cone: MK 5 - weight: about 10 tons

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 quill stroke: 100 mm spindle turning speed range: 40 - 2000 U/min voltage: 380 V Table dimensions: 800 x 400 mm weight: 1,9 t total power requirement: 3,0 kW dimensions of the machine ca.: 1,90 x 1,80 x 1,90 m digital readout, 3-axis: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck, scroll chuck -Manufacturer: TOS, three-jaw chuck Chuck size Ø 80 mm -Passage: Ø 16 mm -Bolt circle: Ø 70 mm -Weight: 1.2 kg

Inv. Num. : 7302 Type: SV 18 RA Producer: TOS Created: 1977, GO 2023 Parameters: Maximum turning length: 1250 mm Maximum turning diameter over bed: 380 mm Maximum turning diameter over support: 215 mm Maximum workpiece weight: 250 kg Equipment: Digital Measurement

TOS W100 Horizontal Boring Mill DRO Spindle 100 mm Spindle speeds 7.1-1120 rpm X/Y/Z/W Axis- 1600/1120/1250/900 mm Table size 1250x1250 mm Max table load 3 ton Table type rotary Facing chuck diameter 600 mm Slide travel 210 mm Max facing diameter 900 mm Facing chuck speed range 7.1 - 224 rpm Total power 15 kW Dimension 6020x3000x3500 Weight 14000 kg Remarks: faceplate is available, under a fixture

CNC tool milling machine TOS Žebrák Manufacturer: Intos Žebrák Type: FNG 50 CNC E Year of construction 2001 Control system: Heidenhain TNC 426 Spindle taper: ISO40 (SK40) Spindle speed: 0-3150 rpm Axle travel: X-700mm Y-500mm Z-500mm Machine weight:2550 kg Rotatable head: -90° ~ +90° Accessories: Documentation Riding bike Cooling Tool holder see photo