tos grinder used for sale

Year of Manufacture/SO/GO: -/-/2004 The machine is in good technical condition. Circulating diameter: 280 mm Spike distance: 630 mm Spike height: 140 mm Grinding length: 630 mm Maximum workpiece weight: 65 kg Power consumption of the grinding spindle: 4 kW Total power: 10 kVA Grinding methods: manual grinding, automatic cycle Grinding programs: slot, longitudinal, face, internal Grooming programs: manual grooming, automatic grooming Control system: CNC control system based on an industrial PC Measuring system: tilting device for measuring the workpiece diameter with automatic corrections Nebula extraction Complete technical documentation of the CZ machine Instructions for using the CNC control system CZ Machine height: 1600 mm Machine length: 3750 mm Machine width: 2300 mm Machine weight: 3000 hp By prior arrangement, the possibility of a tour in progress.

Inv. Num. : 6254 Type: W75 Producer: TOS Created: 1987 Parameters: Work table length: 950 mm Work table width: 950 mm Spindle diameter: 75 mm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 560 mm

Inv. Num. : 7372 Type: WHN 9B NC Producer: TOS Created: 1980 Parameters: Control system: HEIDENHAIN TNC 360 Work table length: 1000 mm Work table width: 1120 mm Maximum table load (uniform): 3000 kg Spindle drive power: 20 kW Maximum spindle speed: 1120 1/min X-axis travel: 1250 mm Y-axis travel: 1000 mm Z-axis travel: 900 mm Spindle diameter: 90 mm Machine weight: 12000 kg

Offer 24009 Specifications: - Center height 200 mm - Center width 1500 mm - Maximum circulation – Ø above bed 400 mm - over face carriage 210 mm - Spindle bore 56 mm - Pick-up cone of the tailstock quill MK 5 - Tailstock quill travel 150 mm - Spindle speeds 11 - 2240 rpm - Feeds longitudinal + flat - Metric thread pitches -Thread - Module thread - Diametrically pitsch thread - Drive 400 V / 7.5 kW - 3 jaw chuck - Space requirement approx. W 3300 x H 1600 x D 1200 mm - Weight approx. 2800 kg

Horizontal boring mill W200H, TOS Axis: X- 8000mm Y- 3150mm Z- 2000mm W- 1600mm

Key data: 1000 mm, 300 mm

Max. grinding length 1000 mm Max. grinding width 320 mm Max. workpiece height 350 mm Main motor power 4 kW Total power requirement 6.8 kVA Machine dimensions L x W x H 4100 x 1750 x 2125 mm Tech. condition - very goes, very little in use Machine weight 3200 kg

Machine in good technical condition, possibility of testing after agreement. Weight: 12000 kg Control: TNC 360. X axis (longitudinal) 1250 mm Y-axis (pricna) 1000 mm Z axis (vertical) 900 mm Table length 1000 mm Table width 1120 mm Workpiece weight 3000 kg Spindle diameter 90 mm Max. shaft speed 1120 rpm Shaft motor power 20 kW

turning diameter: 0 mm turning length: 3000 mm swing diameter over bed slide: 710 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: SPECIFICATIONS Character: Tos Type: SU 50 A Distance between centers: 1250 mm Center height: 250 mm Turning diameter above the bed: ø500 mm Turning diameter above the base: ø270 mm Door outlet: ø55 mm 3-jaw chuck Approx. Onsite Dimension. (l x w x h): 3,300 x 1,300 x 1,500 mm, weight approx.: 3,000 kg

Description: 'SPECIFICATIONS Character: Tos Type: SUI 80 Distance between centers: 2,000 mm Height between centers: 400 mm Turning diameter above the bed: ø800 mm Turning diameter above the base: ø540 mm Door outlet: ø80 mm 4-Jaw chuck' weight approx.: 5,440 kg, Approx. Onsite Dimension. (l x w x h): 4,200 x 1,800 x 1,800 mm

Key data: 130 mm, 3500 mm, 2500 mm

1x used CNC table boring mill manufacturer: TOS VANSDORF TYPE: WHQ 13.8 CNC Year of construction: 2000 Control: TNC 430 Heidenhain Tool changer: yes 40 places Chip conveyor: yes Spindle hours : 30000h Controlled axes: 5 x-axis:3500mm Y-axis:2500mm Z-axis:1250mm W-axis: 800mm B-axis:360° Table clamping surface : 1800x2200mm Load capacity table: 12000kg Spindle mount: 130mm ISO 50 Spindle rotation: 2500rpm

Description: Work table dimensions: 1400 x 360 mm Maximum speed of the vertical spindle: 1400 1/min Travel of the X-axis: 1000 mm Travel of the Y-axis: 300 mm Travel of the Z-axis: 420 mm Approx. Onsite Dimension. (l x w x h): 2,000 x 1,900 x 2,300 mm, weight approx.: 2,760 kg

This TOS Optima Horizontal Machining center was manufactured in the year 2005 in Czech Republic and has 83171 production hours, of which 36511 are spindle hours. It is equipped with a HEIDENHAIN iTNC 530 control unit and has 4 axis. The machine has a spindle speed of 6000 rpm.

Cylindrical grinding machine BU 28/630 with accessories

Cylindrical grinder BU 28/1000 with accessories

Cylindrical grinder 2Ud/700 with accessories.

Surface grinder BPH 320A/1000

Centerless grinding machine BB 6

Center Height : 150 mm Max. Job Diameter : 290 mm Max. Job Length : 1000 mm Grinding Wheel Size : Diameter 400 mm x 50 mm Width Work-Head Speeds : 22.4 rpm to 710 rpm Wheel-Head Speed : 2050 rpm

Used DAL TOSO Filling Machine up to 4500 Lt h Introduction to the Filling Machine DAL TOSO The used DAL TOSO filling machine constructed in 2011 emerges as a perfectly reliable option for bottling operations Boasting a nominal speed of approximately 4500 liters per hour this system therefore proffers consistent performance and unparalleled versatility for an array of products Description of the Machinery The machinery comprises a filler with 20 taps each outfitted with a 22 mm diameter straw Furthermore all components in direct contact with the liquid are meticulously crafted from stainless steel 316 thereby ensuring maximum hygiene and resilience against corrosion A dedicated pump efficiently channels liquid to the filler while the inclusion of false bottles facilitates the thorough cleansing of taps The bell adjustable in height via electric drive confers adaptability in accommodating  ...

spindle diameter: 63 mm taper MK: 5 facing slide: ja digital: ja : ja weight of the machine ca.: 7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 350 mm weight of the machine ca.: 50 KG tool adaptor: MK5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Furnishing: - 3-axis digital display - Rapid traverse - Coolant system - Good condition x-travel 500 mm y-travel 400 mm z-travel 320 mm Speed 40 - 2000 rpm Spindle holder 40 SK Quill stroke 50 mm Table: 700 x 300 mm Total power requirement 4.5 kW Weight 1.3kg Space requirement approx. 1.5 x 1.2 x 1.95 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 1,950 mm, weight approx.: 1,300 kg

The machine is in good technical condition, fully functional, possibility of testing, loading provided. Measuring Heidenhain Positip 855 including controlled axes. Machine weight: 1725 kg Table clamping area: 800x400 mm Table longitudinal movement - x-axis: 600 mm Transverse table movement - z-axis: 400 mm Vertical table movement - y-axis: 400 mm Machine dimensions d x w x h : 1830 x 1645 x 1735 mm

Machine in good technical condition, after agreement possibility of testing. Weight of the machine: 5300 kg Max. grinding diameter: 320 mm Distance of tines: 1000 mm Max. workpiece weight: 350 kg Machine dimensions d x w x h : 4600x1980x1760 mm mm.

The machine is in excellent technical condition, after agreement possibility of inspection. Circular diameter . 295 mm Distance between tines . 1000 mm. The grinder has a fortuna and a wealth of accessories, discs, pliers..

Toshiba BTD-13F-R22 Horizontal Machining Center X : 3000 mm Y : 2300 mm(2000 mm) Z : 1600 mm W : 700 mm Spindle diameter : 130 mm Spindle speed range : 2500 rpm Table working surface : 1800 mm x 2200 mm TOSNUC 888

spindle diameter: 100 mm x-travel: 1600 mm y-travel: 1120 mm z-axis: 1250 mm : 900 mm : 1.250 x 1.250 mm : 360 ° turning speeds: 7,1 - 1.120 U/min table load: 3,0 t : 50 : 2,8 m/min feed: 18- 900 mm/min power capacity - milling spindle: 11 kW transmission ratio: 23 max. torque on the spindle: 3.350 Nm faceplate: Ø 600 mm radial face slide travel: 215 mm faceplate turning speed range: 7,1 - 224 U/min total power requirement: 15 kVA : 14 t range L-W-H: 6,0 x 2,6 x 3,0 m conv. hori. borer in good condition with facing plate - facing plate - 3 axis digital scale - turning table - table support - coolant system - some equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: serial number: 174311 grinding length: 320 mm center height: 60 mm max. grinding wheel speed: 1295 rpm total power requirement: 24 kW machine is in good technical condition, by prior agreement the possibility of testing. grinding wheel turning speeds: 1,295 rpm, weight approx.: 4,600 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 2,000 x 1,500 mm

Description: serial number: 173397 grinding length: 320 mm center height: 60 mm max. grinding wheel speed: 1295 rpm total power requirement: 24 kW machine is in good technical condition, by prior agreement the possibility of testing. grinding wheel turning speeds: 1,295 rpm, weight approx.: 4,600 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 2,000 x 1,500 mm

Description: sanding length: 615 mm sanding spindle speed: 250 rpm machine is in good technical condition, by prior agreement the possibility of testing grinding length: 615 mm, grinding spindle speed: 250 rpm, weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,500 x 1,550 mm

Description: serial number: 56-0213 projection: 365 mm stroke: 10 - 250 mm max. table load: 1000 kg drive power: 6.6 kW machine is in good technical condition, by prior agreement the possibility of testing. total power requirement: 6.6 kW, weight approx.: 2,850 kg, Approx. Onsite Dimension. (l x w x h): 1,425 x 2,270 x 2,500 mm

z-motion: 850 mm, x-motion: 3,000 mm, Distance spindle - table max.: 840 mm, Drive power milling head: 22 kW, Accessories included: No, Coolant type: cooling lubricant, NC rotary table: No, y-motion: 800 mm, control: Heidenhain TNC 407, table surface area l x w : 3000 x 800 mm, tool taper: ISO 50, turning speed range: 9 - 2000 rpm, feed range: 3,000 mm/min, rapid motion: 8 m/min, weight approx.: 16,000 kg, Approx. Onsite Dimension. (l x w x h): 7,770 x 3,500 x 2,870 mm

grinding diameter:250 mm grinding length:630 mm centre height:125 mm control:Siemens S7 swing diameter:280 mm centre distance:630 mm grinding head swivelling:90 ° table swivelabel +/-:+10/-7 ° grinding wheel dia. x width x bore:400 x 40 x 127 mm grinding wheel dia. according abrasion:250 mm max. grinding wheel width:63 mm swing in open rest:70 mm swing in closed rest:70 mm taper bore of workpiece spindle:4 Morse taper of tailstock quill:4 Morse stroke tailstock centers:30 mm clamping force tailstock center:50-1500 s grinding head swivellable +/-:+15/-45 ° output of wheelhead motor:4 kW work piece motor:0,7 hydraulic motor:1,1 kW cool pump motor:0,155 kW lubrication pump motor:0,155 kW electro motor internal grinding:0,75 kW total power requirement:10 kVA weight of the machine ca.:3000 kg dimensions of the machine ca.:L3000/B2300/H1600 mm stepless spindle speed:und Werkstückantrieb M ...

x-travel:800 mm y-travel:630 mm z-travel:500 mm feed stepless:1-7500 mm/min rapid traverse feeds:7500 mm/min tool cone:40 ISO spindle drive motor:10 kW turning speed range - spindle:20-4000 U/min Torque of spindles:630 Nm total connected load:25 kW weight of the machine ca.:5 t dimensions of the machine ca.:15 qm 100 % before loading warranty: none The machine is in very good condition (only one prior owner), only few operating hours. Machine was installed first time and equipped with CNC Heidenhain TNC 355 in 1996. Other optional accessories can be delivered. Price basis: ex stock, free on truck time of delivery: immediatly, prior sales reserved payment:100% before loading warranty: none techn. documentation: as available.

grinding diameter:630 mm grinding length:2000 mm centre height:320 mm table speed -stepless-:0,005-5 m/min min/max. table longitudinal travel:5/ 3350 mm table speeds:8 m/min grinding spindle- cross travel:420 mm workpiece-spindlehead motor:3,0 kW output of wheelhead motor:22 kW motor internal grinding:3 kW lubrication pump motor:0,11 kW weight of the machine ca.:15700 kg dimensions of the machine ca.:H1970/B3100/L12650 mm 40 % advance payment, by order confirmation 60 % before loading the machine warranty: 12 month one general overhauled cylindrical grinding machine, make TOS, type BUT/BUC 63 x 2.000, year of production with new 2-axis CNC Teach In control K 51/2 or alternatively Siemens Sinumerik 840 D. Our general overhauling includes: regrinding and scraping of all guide ways including lower and upper side of the table. Replacement of all main components. Complete new electric includi ...

grinding diameter:630 mm grinding length:2000 oder 3000 mm centre height:320 mm table speed -stepless-:0,005-5 m/min min/max. table longitudinal travel:5/ 3350 mm table speeds:8 m/min grinding spindle- cross travel:420 mm workpiece-spindlehead motor:3,0 kW output of wheelhead motor:22 kW motor internal grinding:3 kW lubrication pump motor:0,11 kW weight of the machine ca.:15700 kg dimensions of the machine ca.:H1970/B3100/L12650 mm 40 % advance payment, by order confirmation 60 % before loading the machine warranty: 12 month one general overhauled cylindrical grinding machine, make TOS, type BUT/BUC 63 x 3000 with new 2-axis CNC Teach In control K 51/2 or alternatively Siemens Sinumerik 840 D. Our general overhauling includes: regrinding and scraping of all guide ways including lower and upper side of the table. Replacement of all main components. Complete new electric including cabinet  ...

grinding diameter:160 mm grinding length:320 mm centre height:80 mm 100 % before loading warranty: 12 months one general overhauled cylindrical grinding machine, make TOS, type BU 16 Our general overhauling includes: regrinding and scraping of all guide ways including lower and upper side of the table. Replacement of all main components. Complete new electric including cabinet according to "CE". Complete new paint (2 colors), 48 hours test run. We guarantee new machine accuracy, technical and optical execution like new with 12 months full warranty.

grinding diameter:750 mm grinding length:2000 mm centre height:375 mm grinding wheel size:750x100x305 mm :40-250 mm tailstock-quill conus:Morse 6 table swivable ca.:4° (1:8) turning speed range - workpiece spindle:(stufenlos) 1-50 U/min grinding wheel speed:20-33 m/sec grinding wheel motor:19 kW total power requirement:ca. 41 kW

grinding diameter:630 mm grinding length:2000 mm centre height:320 mm max. workpiece weight:2500 kg swing diameter in open bench rest:40-150 mm taper in tailstock:6 MK table swivelabel +/-:6°30' ° work piece spindle speed:8-50, 50-315 (2 Bereiche) U/min grinding wheel speed:33 m/sec output of wheelhead motor:15 kW workpiece-spindlehead motor:3,0 kW total power requirement:31 kW weight of the machine ca.:12400 kg open type steady rest:2 (schwer) Stück steady fixed:2 Stück grinding wheel flange:2 Stück technical documentation:in deutscher Sprache 40 % advance payment, by order confirmation 60 % before loading the machine warranty: 12 month one general overhauled cylindrical grinding machine, make TOS, type BUT/BUC 63 x 2.000, year of production with new 2-axis CNC Teach In control K 51/2 or alternatively Siemens Sinumerik 840 D. Our general overhauling includes: regrinding and scrapi ...

x-travel:600 mm y-travel:500 mm z-travel:400 mm spindle diameter:90 mm spindle turning speed range:45 - 2000 U/min table length:1250 mm table width:200 mm groove width:14 mm table rotating:45 ° total power requirement:4,2 kW weight of the machine ca.:2000 kg dimensions of the machine ca.:2000 x 1800 x 1550 mm Year:ca.1957 Documents:vorhanden

table length:2200 mm table width:2500 mm table load:16 t total power requirement:6,5 kW feed speeds:1,25 - 160 mm/min rapid traverse speed:2000 mm/min longitudinal adjustment:1500 mm weight of the machine ca.:12 t dimensions of the machine ca.:4,1 x 2,65 x 0,95 m

Type: WHN 13A Parameters: 130 mm, 2000 mm Manufacturer: Tos Čelákovice Year of production / SO / GO: 1979 / - / - Description: Heidenhain control system Cross arrangement of beds Four axes + rotary table Retractable working spindle Machine designed for universal engineering production Heidenhain control system Axis strengthening hydraulically Machine parameters: X-axis 3510 Y axis 2040 Z axis 1200 W 800 axis incl. reinforcement, 600 without reinforcement Clamping surface of the table 1800 x 1800. The machine is connected, with the possibility to test. Bearings and damaged wheels must be replaced in the headstock.

for sale wood fired coffee roaster , machine dated but excellent condition as new working , manufacturer OFFICINE ELETTRO MECCANICHE , BOLOGNA as is visible the nameplate opposite the machine , unfortunately I can not add more information because I am not an expert on such machines , the machine is located in Italy and precisimante in Lucca Tuscany , and possible to make any inspection for viewing

PC system from former POS workstation TOSHIBA 4818-T10, S/N QCQW00085001EH, Intel Celeron J1900, 4 GB RAM, 256 GB SSD, without software, Not suitable and/or intended for use within the meaning of § 146 AO, 1x mouse and keyboard, 1x barcode scanner DATALOGIC HD3130, 1x receipt printer TOSHIBA TRST-A10-SC1-QM-R

Grinder Rex vinkl

Technische Daten: - max. Arbeitsbreite 4000 mm - Linearführungen in X-Achse - automatischer Arbeitsablauf X-Achse - automatische Verstellung der Z-Achse - Magnetspanntisch 2 x 2050 mm x 200 mm - Schleifwinkel Verstellung +/- 90C - Drehzahl Schleifscheibe 1440 U/min - Schleifscheiben FI 205 x 115 x FI 145 mm - Vorschubgeschwindigkeit 0 - 12 m/min stufenlos einstellbar mit Frequenzumformer - Motor 5,5 kW / 400 V - Motor Vorschub 0,75 kW - Motor Kühlmittelpumpe 90 W - Kühlmitteleinrichtung verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - Abmessungen L=5630, B=850 mm, H=1700 - Gewicht 2500 kg

Technische Daten: - max. Arbeitsbreite 1000 mm - automatischer Arbeitsablauf in X-Achse mit THK - Linearführungen und Staubstutz - manuelle Verstellung der Z-Achse - Magnetspanntisch 140 x 1000 mm - Schleifwinkel +/- 90C - Drehzahl Schleifscheibe 2840 U/min - Schleifscheiben FI 125 x 50 x 32 mm - Vorschubgeschwindigkeit 9 m/min - Motor 1,5 kW / 400 V - Motor Vorschub 60 W - Motor Kühlmittelpumpe 40 W - Kühlmitteleinrichtung verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - Abmessungen L=1500, B=700 mm, H=1600 - Gewicht 900 kg

Technische Daten: - max. Arbeitsbreite 1000 mm - automatischer Arbeitsablauf in X-Achse mit THK - Linearführungen und Staubstutz - automatische Verstellung der Z-Achse - Magnetspanntisch 140 x 1000 mm - Schleifwinkel +/- 90C - Drehzahl Schleifscheibe 2840 U/min - Schleifscheiben FI 125 x 50 x 32 mm - Vorschubgeschwindigkeit 3 - 9 m/min stufenlos einstellbar mit Frequenzumformer - Motor 1,5 kW / 400 V - Motor Vorschub 60 W - Motor Kühlmittelpumpe 40 W - Kühlmitteleinrichtung verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - Abmessungen L=1500, B=700 mm, H=1600 - Gewicht 900 kg